path: root/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl

/**
* @file materialF.glsl
*
* $LicenseInfo:firstyear=2007&license=viewerlgpl$
* Second Life Viewer Source Code
* Copyright (C) 2007, Linden Research, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation;
* version 2.1 of the License only.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
*
* Linden Research, Inc., 945 Battery Street, San Francisco, CA  94111  USA
* $/LicenseInfo$
*/

/*[EXTRA_CODE_HERE]*/

//class1/deferred/materialF.glsl

// This shader is used for both writing opaque/masked content to the gbuffer and writing blended content to the framebuffer during the alpha pass.

#define DIFFUSE_ALPHA_MODE_NONE     0
#define DIFFUSE_ALPHA_MODE_BLEND    1
#define DIFFUSE_ALPHA_MODE_MASK     2
#define DIFFUSE_ALPHA_MODE_EMISSIVE 3

uniform float emissive_brightness;  // fullbright flag, 1.0 == fullbright, 0.0 otherwise
uniform int sun_up_factor;

#ifdef WATER_FOG
vec4 applyWaterFogView(vec3 pos, vec4 color);
#endif

vec3 atmosFragLighting(vec3 l, vec3 additive, vec3 atten);
vec3 scaleSoftClipFrag(vec3 l);

vec3 fullbrightAtmosTransportFrag(vec3 light, vec3 additive, vec3 atten);
vec3 fullbrightScaleSoftClip(vec3 light);

void calcAtmosphericVars(vec3 inPositionEye, vec3 light_dir, float ambFactor, out vec3 sunlit, out vec3 amblit, out vec3 additive, out vec3 atten, bool use_ao);

vec3 srgb_to_linear(vec3 cs);
vec3 linear_to_srgb(vec3 cs);

#if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_BLEND)

#ifdef DEFINE_GL_FRAGCOLOR
out vec4 frag_color;
#else
#define frag_color gl_FragColor
#endif

#ifdef HAS_SUN_SHADOW
float sampleDirectionalShadow(vec3 pos, vec3 norm, vec2 pos_screen);
#endif

uniform samplerCube environmentMap;
uniform sampler2D     lightFunc;

// Inputs
uniform vec4 morphFactor;
uniform vec3 camPosLocal;
uniform mat3 env_mat;

uniform vec3 sun_dir;
uniform vec3 moon_dir;
VARYING vec2 vary_fragcoord;

VARYING vec3 vary_position;

uniform mat4 proj_mat;
uniform mat4 inv_proj;
uniform vec2 screen_res;

uniform vec4 light_position[8];
uniform vec3 light_direction[8];
uniform vec4 light_attenuation[8];
uniform vec3 light_diffuse[8];

float getAmbientClamp();

vec3 calcPointLightOrSpotLight(vec3 light_col, vec3 npos, vec3 diffuse, vec4 spec, vec3 v, vec3 n, vec4 lp, vec3 ln, float la, float fa, float is_pointlight, inout float glare, float ambiance)
{
    // SL-14895 inverted attenuation work-around
    // This routine is tweaked to match deferred lighting, but previously used an inverted la value. To reconstruct
    // that previous value now that the inversion is corrected, we reverse the calculations in LLPipeline::setupHWLights()
    // to recover the `adjusted_radius` value previously being sent as la.
    float falloff_factor = (12.0 * fa) - 9.0;
    float inverted_la = falloff_factor / la;
    // Yes, it makes me want to cry as well. DJH
    
    vec3 col = vec3(0);

    //get light vector
    vec3 lv = lp.xyz - v;

    //get distance
    float dist = length(lv);
    float da = 1.0;

    dist /= inverted_la;

    if (dist > 0.0 && inverted_la > 0.0)
    {
        //normalize light vector
        lv = normalize(lv);

        //distance attenuation
        float dist_atten = clamp(1.0 - (dist - 1.0*(1.0 - fa)) / fa, 0.0, 1.0);
        dist_atten *= dist_atten;
        dist_atten *= 2.0f;

        if (dist_atten <= 0.0)
        {
            return col;
        }

        // spotlight coefficient.
        float spot = max(dot(-ln, lv), is_pointlight);
        da *= spot*spot; // GL_SPOT_EXPONENT=2

        //angular attenuation
        da *= dot(n, lv);

        float lit = 0.0f;

        float amb_da = ambiance;
        if (da >= 0)
        {
            lit = max(da * dist_atten, 0.0);
            col = lit * light_col * diffuse;
            amb_da += (da*0.5 + 0.5) * ambiance;
        }
        amb_da += (da*da*0.5 + 0.5) * ambiance;
        amb_da *= dist_atten;
        amb_da = min(amb_da, 1.0f - lit);

        // SL-10969 need to see why these are blown out
        //col.rgb += amb_da * light_col * diffuse;

        if (spec.a > 0.0)
        {
            //vec3 ref = dot(pos+lv, norm);
            vec3 h = normalize(lv + npos);
            float nh = dot(n, h);
            float nv = dot(n, npos);
            float vh = dot(npos, h);
            float sa = nh;
            float fres = pow(1 - dot(h, npos), 5)*0.4 + 0.5;

            float gtdenom = 2 * nh;
            float gt = max(0, min(gtdenom * nv / vh, gtdenom * da / vh));

            if (nh > 0.0)
            {
                float scol = fres*texture2D(lightFunc, vec2(nh, spec.a)).r*gt / (nh*da);
                vec3 speccol = lit*scol*light_col.rgb*spec.rgb;
                speccol = clamp(speccol, vec3(0), vec3(1));
                col += speccol;

                float cur_glare = max(speccol.r, speccol.g);
                cur_glare = max(cur_glare, speccol.b);
                glare = max(glare, speccol.r);
                glare += max(cur_glare, 0.0);
            }
        }
    }

    return max(col, vec3(0.0, 0.0, 0.0));
}

#else
#ifdef DEFINE_GL_FRAGCOLOR
out vec4 frag_data[3];
#else
#define frag_data gl_FragData
#endif
#endif

uniform sampler2D diffuseMap;  //always in sRGB space

#ifdef HAS_NORMAL_MAP
uniform sampler2D bumpMap;
#endif

#ifdef HAS_SPECULAR_MAP
uniform sampler2D specularMap;

VARYING vec2 vary_texcoord2;
#endif

uniform float env_intensity;
uniform vec4 specular_color;  // specular color RGB and specular exponent (glossiness) in alpha

#ifdef HAS_ALPHA_MASK
uniform float minimum_alpha;
#endif

#ifdef HAS_NORMAL_MAP
VARYING vec3 vary_mat0;
VARYING vec3 vary_mat1;
VARYING vec3 vary_mat2;
VARYING vec2 vary_texcoord1;
#else
VARYING vec3 vary_normal;
#endif

VARYING vec4 vertex_color;
VARYING vec2 vary_texcoord0;

vec2 encode_normal(vec3 n);

void main()
{
    vec2 pos_screen = vary_texcoord0.xy;

    vec4 diffcol = texture2D(diffuseMap, vary_texcoord0.xy);
	diffcol.rgb *= vertex_color.rgb;

#ifdef HAS_ALPHA_MASK
#if DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_BLEND
    if (diffcol.a*vertex_color.a < minimum_alpha)
#else
    if (diffcol.a < minimum_alpha)
#endif
    {
        discard;
    }
#endif

#if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_BLEND)
	vec3 gamma_diff = diffcol.rgb;
	diffcol.rgb = srgb_to_linear(diffcol.rgb);
#endif

#ifdef HAS_SPECULAR_MAP
    vec4 spec = texture2D(specularMap, vary_texcoord2.xy);
    spec.rgb *= specular_color.rgb;
#else
    vec4 spec = vec4(specular_color.rgb, 1.0);
#endif

#ifdef HAS_NORMAL_MAP
	vec4 norm = texture2D(bumpMap, vary_texcoord1.xy);

	norm.xyz = norm.xyz * 2 - 1;

	vec3 tnorm = vec3(dot(norm.xyz,vary_mat0),
			  dot(norm.xyz,vary_mat1),
			  dot(norm.xyz,vary_mat2));
#else
	vec4 norm = vec4(0,0,0,1.0);
	vec3 tnorm = vary_normal;
#endif

    norm.xyz = normalize(tnorm.xyz);

    vec2 abnormal = encode_normal(norm.xyz);

    vec4 final_color = diffcol;

#if (DIFFUSE_ALPHA_MODE != DIFFUSE_ALPHA_MODE_EMISSIVE)
	final_color.a = emissive_brightness;
#else
	final_color.a = max(final_color.a, emissive_brightness);
#endif

    vec4 final_specular = spec;
    
#ifdef HAS_SPECULAR_MAP
    vec4 final_normal = vec4(encode_normal(normalize(tnorm)), env_intensity * spec.a, 0.0);
	final_specular.a = specular_color.a * norm.a;
#else
	vec4 final_normal = vec4(encode_normal(normalize(tnorm)), env_intensity, 0.0);
	final_specular.a = specular_color.a;
#endif

#if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_BLEND)

    //forward rendering, output just lit sRGBA
    vec3 pos = vary_position;

    float shadow = 1.0f;

#ifdef HAS_SUN_SHADOW
    shadow = sampleDirectionalShadow(pos.xyz, norm.xyz, pos_screen);
#endif

    spec = final_specular;
    vec4 diffuse = final_color;
    float envIntensity = final_normal.z;

    vec3 color = vec3(0,0,0);

    vec3 light_dir = (sun_up_factor == 1) ? sun_dir : moon_dir;

    float bloom = 0.0;
    vec3 sunlit;
    vec3 amblit;
    vec3 additive;
    vec3 atten;

    calcAtmosphericVars(pos.xyz, light_dir, 1.0, sunlit, amblit, additive, atten, false);
    
        // This call breaks the Mac GLSL compiler/linker for unknown reasons (17Mar2020)
        // The call is either a no-op or a pure (pow) gamma adjustment, depending on GPU level
        // TODO: determine if we want to re-apply the gamma adjustment, and if so understand & fix Mac breakage
        //color = fullbrightScaleSoftClip(color);

    vec3 refnormpersp = normalize(reflect(pos.xyz, norm.xyz));

    //we're in sRGB space, so gamma correct this dot product so 
    // lighting from the sun stays sharp
    float da = clamp(dot(normalize(norm.xyz), light_dir.xyz), 0.0, 1.0);
    da = pow(da, 1.0 / 1.3);

    color = amblit;

    //darken ambient for normals perpendicular to light vector so surfaces in shadow 
    // and facing away from light still have some definition to them.
    // do NOT gamma correct this dot product so ambient lighting stays soft
    float ambient = min(abs(dot(norm.xyz, sun_dir.xyz)), 1.0);
    ambient *= 0.5;
    ambient *= ambient;
    ambient = (1.0 - ambient);

    vec3 sun_contrib = min(da, shadow) * sunlit;
    
    color *= ambient;

    color += sun_contrib;

    color *= gamma_diff.rgb;

    float glare = 0.0;

    if (spec.a > 0.0)  // specular reflection
    {
        /*  // Reverting this specular calculation to previous 'dumbshiny' version - DJH 6/17/2020
            // Preserving the refactored version as a comment for potential reconsideration,
            // overriding the general rule to avoid pollutiong the source with commented code.
            //
            //  If you're reading this in 2021+, feel free to obliterate.

        vec3 npos = -normalize(pos.xyz);

        //vec3 ref = dot(pos+lv, norm);
        vec3 h = normalize(light_dir.xyz + npos);
        float nh = dot(norm.xyz, h);
        float nv = dot(norm.xyz, npos);
        float vh = dot(npos, h);
        float sa = nh;
        float fres = pow(1 - dot(h, npos), 5)*0.4 + 0.5;

        float gtdenom = 2 * nh;
        float gt = max(0, min(gtdenom * nv / vh, gtdenom * da / vh));

        if (nh > 0.0)
        {
            float scol = fres*texture2D(lightFunc, vec2(nh, spec.a)).r*gt / (nh*da);
            vec3 sp = sun_contrib*scol / 6.0f;
            sp = clamp(sp, vec3(0), vec3(1));
            bloom = dot(sp, sp) / 4.0;
            color += sp * spec.rgb;
        }
        */

        float sa        = dot(refnormpersp, sun_dir.xyz);
        vec3  dumbshiny = sunlit * shadow * (texture2D(lightFunc, vec2(sa, spec.a)).r);

        // add the two types of shiny together
        vec3 spec_contrib = dumbshiny * spec.rgb;
        bloom             = dot(spec_contrib, spec_contrib) / 6;

        glare = max(spec_contrib.r, spec_contrib.g);
        glare = max(glare, spec_contrib.b);

        color += spec_contrib;
    }

    color = mix(color.rgb, diffcol.rgb, diffuse.a);

    if (envIntensity > 0.0)
    {
        //add environmentmap
        vec3 env_vec = env_mat * refnormpersp;

        vec3 reflected_color = textureCube(environmentMap, env_vec).rgb;

        color = mix(color, reflected_color, envIntensity);

        float cur_glare = max(reflected_color.r, reflected_color.g);
        cur_glare = max(cur_glare, reflected_color.b);
        cur_glare *= envIntensity*4.0;
        glare += cur_glare;
    }

    color = atmosFragLighting(color, additive, atten);
    color = scaleSoftClipFrag(color);

    //convert to linear before adding local lights
    color = srgb_to_linear(color);

    vec3 npos = normalize(-pos.xyz);

    vec3 light = vec3(0, 0, 0);
    
    final_specular.rgb = srgb_to_linear(final_specular.rgb); // SL-14035

#define LIGHT_LOOP(i) light.rgb += calcPointLightOrSpotLight(light_diffuse[i].rgb, npos, diffuse.rgb, final_specular, pos.xyz, norm.xyz, light_position[i], light_direction[i].xyz, light_attenuation[i].x, light_attenuation[i].y, light_attenuation[i].z, glare, light_attenuation[i].w );

    LIGHT_LOOP(1)
        LIGHT_LOOP(2)
        LIGHT_LOOP(3)
        LIGHT_LOOP(4)
        LIGHT_LOOP(5)
        LIGHT_LOOP(6)
        LIGHT_LOOP(7)

    color += light;

    glare = min(glare, 1.0);
    float al = max(diffcol.a, glare)*vertex_color.a;

    //convert to srgb as this color is being written post gamma correction
    color = linear_to_srgb(color);

#ifdef WATER_FOG
    vec4 temp = applyWaterFogView(pos, vec4(color, al));
    color = temp.rgb;
    al = temp.a;
#endif

    frag_color = vec4(color, al);

#else // mode is not DIFFUSE_ALPHA_MODE_BLEND, encode to gbuffer 

    // deferred path
    frag_data[0] = final_color; //gbuffer is sRGB
    frag_data[1] = final_specular; // XYZ = Specular color. W = Specular exponent.
    frag_data[2] = final_normal; // XY = Normal.  Z = Env. intensity.
#endif
}