path: root/indra/llprimitive/llprimitive.cpp

/** 
 * @file llprimitive.cpp
 * @brief LLPrimitive base class
 *
 * $LicenseInfo:firstyear=2001&license=viewerlgpl$
 * Second Life Viewer Source Code
 * Copyright (C) 2010, Linden Research, Inc.
 * 
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation;
 * version 2.1 of the License only.
 * 
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 * 
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 * 
 * Linden Research, Inc., 945 Battery Street, San Francisco, CA  94111  USA
 * $/LicenseInfo$
 */

#include "linden_common.h"

#include "material_codes.h"
#include "llerror.h"
#include "message.h"
#include "llprimitive.h"
#include "llvolume.h"
#include "legacy_object_types.h"
#include "v4coloru.h"
#include "llvolumemgr.h"
#include "llstring.h"
#include "lldatapacker.h"
#include "llsdutil_math.h"
#include "llprimtexturelist.h"
#include "llmaterialid.h"
#include "llsdutil.h"

/**
 * exported constants
 */

const F32 OBJECT_CUT_MIN = 0.f;
const F32 OBJECT_CUT_MAX = 1.f;
const F32 OBJECT_CUT_INC = 0.05f;
const F32 OBJECT_MIN_CUT_INC = 0.02f;
const F32 OBJECT_ROTATION_PRECISION = 0.05f;

const F32 OBJECT_TWIST_MIN = -360.f;
const F32 OBJECT_TWIST_MAX =  360.f;
const F32 OBJECT_TWIST_INC =   18.f;

// This is used for linear paths,
// since twist is used in a slightly different manner.
const F32 OBJECT_TWIST_LINEAR_MIN	= -180.f;
const F32 OBJECT_TWIST_LINEAR_MAX	=  180.f;
const F32 OBJECT_TWIST_LINEAR_INC	=    9.f;

const F32 OBJECT_MIN_HOLE_SIZE = 0.05f;
const F32 OBJECT_MAX_HOLE_SIZE_X = 1.0f;
const F32 OBJECT_MAX_HOLE_SIZE_Y = 0.5f;

// Revolutions parameters.
const F32 OBJECT_REV_MIN = 1.0f;
const F32 OBJECT_REV_MAX = 4.0f;
const F32 OBJECT_REV_INC = 0.1f;

// lights
const F32 LIGHT_MIN_RADIUS = 0.0f;
const F32 LIGHT_DEFAULT_RADIUS = 5.0f;
const F32 LIGHT_MAX_RADIUS = 20.0f;
const F32 LIGHT_MIN_FALLOFF = 0.0f;
const F32 LIGHT_DEFAULT_FALLOFF = 1.0f;
const F32 LIGHT_MAX_FALLOFF = 2.0f;
const F32 LIGHT_MIN_CUTOFF = 0.0f;
const F32 LIGHT_DEFAULT_CUTOFF = 0.0f;
const F32 LIGHT_MAX_CUTOFF = 180.f;

// reflection probes
const F32 REFLECTION_PROBE_MIN_AMBIANCE = 0.f;
const F32 REFLECTION_PROBE_MAX_AMBIANCE = 1.f;
const F32 REFLECTION_PROBE_DEFAULT_AMBIANCE = 0.f;
const F32 REFLECTION_PROBE_MIN_CLIP_DISTANCE = 0.f;
const F32 REFLECTION_PROBE_MAX_CLIP_DISTANCE = 1024.f;
const F32 REFLECTION_PROBE_DEFAULT_CLIP_DISTANCE = 0.f;

// "Tension" => [0,10], increments of 0.1
const F32 FLEXIBLE_OBJECT_MIN_TENSION = 0.0f;
const F32 FLEXIBLE_OBJECT_DEFAULT_TENSION = 1.0f;
const F32 FLEXIBLE_OBJECT_MAX_TENSION = 10.0f; 

// "Drag" => [0,10], increments of 0.1
const F32 FLEXIBLE_OBJECT_MIN_AIR_FRICTION = 0.0f;
const F32 FLEXIBLE_OBJECT_DEFAULT_AIR_FRICTION = 2.0f;
const F32 FLEXIBLE_OBJECT_MAX_AIR_FRICTION = 10.0f;

// "Gravity" = [-10,10], increments of 0.1
const F32 FLEXIBLE_OBJECT_MIN_GRAVITY = -10.0f;
const F32 FLEXIBLE_OBJECT_DEFAULT_GRAVITY = 0.3f;
const F32 FLEXIBLE_OBJECT_MAX_GRAVITY = 10.0f;

// "Wind" = [0,10], increments of 0.1
const F32 FLEXIBLE_OBJECT_MIN_WIND_SENSITIVITY = 0.0f;
const F32 FLEXIBLE_OBJECT_DEFAULT_WIND_SENSITIVITY = 0.0f;
const F32 FLEXIBLE_OBJECT_MAX_WIND_SENSITIVITY = 10.0f;

// I'll explain later...
const F32 FLEXIBLE_OBJECT_MAX_INTERNAL_TENSION_FORCE = 0.99f; 

const F32 FLEXIBLE_OBJECT_DEFAULT_LENGTH = 1.0f;
const BOOL FLEXIBLE_OBJECT_DEFAULT_USING_COLLISION_SPHERE = FALSE;
const BOOL FLEXIBLE_OBJECT_DEFAULT_RENDERING_COLLISION_SPHERE = FALSE;

const char *SCULPT_DEFAULT_TEXTURE = "be293869-d0d9-0a69-5989-ad27f1946fd4"; // old inverted texture: "7595d345-a24c-e7ef-f0bd-78793792133e";

// Texture rotations are sent over the wire as a S16.  This is used to scale the actual float
// value to a S16.   Don't use 7FFF as it introduces some odd rounding with 180 since it 
// can't be divided by 2.   See DEV-19108
const F32	TEXTURE_ROTATION_PACK_FACTOR = ((F32) 0x08000);

struct material_id_type // originally from llrendermaterialtable
{
    material_id_type()
    {
        memset((void*)m_value, 0, sizeof(m_value));
    }

    bool operator==(const material_id_type& other) const
    {
        return (memcmp(m_value, other.m_value, sizeof(m_value)) == 0);
    }

    bool operator!=(const material_id_type& other) const
    {
        return !operator==(other);
    }

    bool isNull() const
    {
        return (memcmp(m_value, s_null_id, sizeof(m_value)) == 0);
    }

    U8 m_value[MATERIAL_ID_SIZE]; // server side this is MD5RAW_BYTES

    static const U8 s_null_id[MATERIAL_ID_SIZE];
};

const U8 material_id_type::s_null_id[] = { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 };

//static 
// LEGACY: by default we use the LLVolumeMgr::gVolumeMgr global
// TODO -- eliminate this global from the codebase!
LLVolumeMgr* LLPrimitive::sVolumeManager = NULL;

// static
void LLPrimitive::setVolumeManager( LLVolumeMgr* volume_manager )
{
	if ( !volume_manager || sVolumeManager )
	{
		LL_ERRS() << "LLPrimitive::sVolumeManager attempting to be set to NULL or it already has been set." << LL_ENDL;
	}
	sVolumeManager = volume_manager;
}

// static
bool LLPrimitive::cleanupVolumeManager()
{
	BOOL res = FALSE;
	if (sVolumeManager) 
	{
		res = sVolumeManager->cleanup();
		delete sVolumeManager;
		sVolumeManager = NULL;
	}
	return res;
}


//===============================================================
LLPrimitive::LLPrimitive()
:	mTextureList(),
	mNumTEs(0),
	mMiscFlags(0),
	mNumBumpmapTEs(0)
{
	mPrimitiveCode = 0;

	mMaterial = LL_MCODE_STONE;
	mVolumep  = NULL;

	mChanged  = UNCHANGED;

	mPosition.setVec(0.f,0.f,0.f);
	mVelocity.setVec(0.f,0.f,0.f);
	mAcceleration.setVec(0.f,0.f,0.f);

	mRotation.loadIdentity();
	mAngularVelocity.setVec(0.f,0.f,0.f);
	
	mScale.setVec(1.f,1.f,1.f);
}

//===============================================================
LLPrimitive::~LLPrimitive()
{
	clearTextureList();
	// Cleanup handled by volume manager
	if (mVolumep && sVolumeManager)
	{
		sVolumeManager->unrefVolume(mVolumep);
	}
	mVolumep = NULL;
}

void LLPrimitive::clearTextureList()
{
}

//===============================================================
// static
LLPrimitive *LLPrimitive::createPrimitive(LLPCode p_code)
{
	LLPrimitive *retval = new LLPrimitive();
	
	if (retval)
	{
		retval->init_primitive(p_code);
	}
	else
	{
		LL_ERRS() << "primitive allocation failed" << LL_ENDL;
	}

	return retval;
}

//===============================================================
void LLPrimitive::init_primitive(LLPCode p_code)
{
	clearTextureList();
	mPrimitiveCode = p_code;
}

void LLPrimitive::setPCode(const U8 p_code)
{
	mPrimitiveCode = p_code;
}

//===============================================================
LLTextureEntry* LLPrimitive::getTE(const U8 index) const
{
	return mTextureList.getTexture(index);
}

//===============================================================
void LLPrimitive::setNumTEs(const U8 num_tes)
{
	mTextureList.setSize(num_tes);
}

//===============================================================
void  LLPrimitive::setAllTETextures(const LLUUID &tex_id)
{
	mTextureList.setAllIDs(tex_id);
}

//===============================================================
void LLPrimitive::setTE(const U8 index, const LLTextureEntry& te)
{
	if(mTextureList.copyTexture(index, te) != TEM_CHANGE_NONE && te.getBumpmap() > 0)
	{
		mNumBumpmapTEs++;
	}
}

S32  LLPrimitive::setTETexture(const U8 index, const LLUUID &id)
{
	return mTextureList.setID(index, id);
}

S32  LLPrimitive::setTEColor(const U8 index, const LLColor4 &color)
{
	return mTextureList.setColor(index, color);
}

S32  LLPrimitive::setTEColor(const U8 index, const LLColor3 &color)
{
	return mTextureList.setColor(index, color);
}

S32  LLPrimitive::setTEAlpha(const U8 index, const F32 alpha)
{
	return mTextureList.setAlpha(index, alpha);
}

//===============================================================
S32  LLPrimitive::setTEScale(const U8 index, const F32 s, const F32 t)
{
	return mTextureList.setScale(index, s, t);
}


// BUG: slow - done this way because texture entries have some
// voodoo related to texture coords
S32 LLPrimitive::setTEScaleS(const U8 index, const F32 s)
{
	return mTextureList.setScaleS(index, s);
}


// BUG: slow - done this way because texture entries have some
// voodoo related to texture coords
S32 LLPrimitive::setTEScaleT(const U8 index, const F32 t)
{
	return mTextureList.setScaleT(index, t);
}


//===============================================================
S32  LLPrimitive::setTEOffset(const U8 index, const F32 s, const F32 t)
{
	return mTextureList.setOffset(index, s, t);
}


// BUG: slow - done this way because texture entries have some
// voodoo related to texture coords
S32 LLPrimitive::setTEOffsetS(const U8 index, const F32 s)
{
	return mTextureList.setOffsetS(index, s);
}


// BUG: slow - done this way because texture entries have some
// voodoo related to texture coords
S32 LLPrimitive::setTEOffsetT(const U8 index, const F32 t)
{
	return mTextureList.setOffsetT(index, t);
}


//===============================================================
S32  LLPrimitive::setTERotation(const U8 index, const F32 r)
{
	return mTextureList.setRotation(index, r);
}

S32 LLPrimitive::setTEMaterialID(const U8 index, const LLMaterialID& pMaterialID)
{
	return mTextureList.setMaterialID(index, pMaterialID);
}

S32 LLPrimitive::setTEMaterialParams(const U8 index, const LLMaterialPtr pMaterialParams)
{
	return mTextureList.setMaterialParams(index, pMaterialParams);
}

LLMaterialPtr LLPrimitive::getTEMaterialParams(const U8 index)
{
	return mTextureList.getMaterialParams(index);
}

//===============================================================
S32  LLPrimitive::setTEBumpShinyFullbright(const U8 index, const U8 bump)
{
	updateNumBumpmap(index, bump);
	return mTextureList.setBumpShinyFullbright(index, bump);
}

S32  LLPrimitive::setTEMediaTexGen(const U8 index, const U8 media)
{
	return mTextureList.setMediaTexGen(index, media);
}

S32  LLPrimitive::setTEBumpmap(const U8 index, const U8 bump)
{
	updateNumBumpmap(index, bump);
	return mTextureList.setBumpMap(index, bump);
}

S32  LLPrimitive::setTEBumpShiny(const U8 index, const U8 bump_shiny)
{
	updateNumBumpmap(index, bump_shiny);
	return mTextureList.setBumpShiny(index, bump_shiny);
}

S32  LLPrimitive::setTETexGen(const U8 index, const U8 texgen)
{
	return mTextureList.setTexGen(index, texgen);
}

S32  LLPrimitive::setTEShiny(const U8 index, const U8 shiny)
{
	return mTextureList.setShiny(index, shiny);
}

S32  LLPrimitive::setTEFullbright(const U8 index, const U8 fullbright)
{
	return mTextureList.setFullbright(index, fullbright);
}

S32  LLPrimitive::setTEMediaFlags(const U8 index, const U8 media_flags)
{
	return mTextureList.setMediaFlags(index, media_flags);
}

S32 LLPrimitive::setTEGlow(const U8 index, const F32 glow)
{
	return mTextureList.setGlow(index, glow);
}

void LLPrimitive::setAllTESelected(bool sel)
{
	for (int i = 0, cnt = getNumTEs(); i < cnt; i++)
	{
		setTESelected(i, sel);
	}
}
	
void LLPrimitive::setTESelected(const U8 te, bool sel)
{
	LLTextureEntry* tep = getTE(te);
	if ( (tep) && (tep->setSelected(sel)) && (!sel) && (tep->hasPendingMaterialUpdate()) )
	{
		LLMaterialID material_id = tep->getMaterialID();
		setTEMaterialID(te, material_id);
	}
}

LLPCode LLPrimitive::legacyToPCode(const U8 legacy)
{
	// TODO: Should this default to something valid?
	// Maybe volume?
	LLPCode pcode = 0;

	switch (legacy)
	{
		/*
	case BOX:
		pcode = LL_PCODE_CUBE;
		break;
	case CYLINDER:
		pcode = LL_PCODE_CYLINDER;
		break;
	case CONE:
		pcode = LL_PCODE_CONE;
		break;
	case HALF_CONE:
		pcode = LL_PCODE_CONE_HEMI;
		break;
	case HALF_CYLINDER:
		pcode = LL_PCODE_CYLINDER_HEMI;
		break;
	case HALF_SPHERE:
		pcode = LL_PCODE_SPHERE_HEMI;
		break;
	case PRISM:
		pcode = LL_PCODE_PRISM;
		break;
	case PYRAMID:
		pcode = LL_PCODE_PYRAMID;
		break;
	case SPHERE:
		pcode = LL_PCODE_SPHERE;
		break;
	case TETRAHEDRON:
		pcode = LL_PCODE_TETRAHEDRON;
		break;
	case DEMON:
		pcode = LL_PCODE_LEGACY_DEMON;
		break;
	case LSL_TEST:
		pcode = LL_PCODE_LEGACY_LSL_TEST;
		break;
	case ORACLE:
		pcode = LL_PCODE_LEGACY_ORACLE;
		break;
	case TEXTBUBBLE:
		pcode = LL_PCODE_LEGACY_TEXT_BUBBLE;
		break;
	case ATOR:
		pcode = LL_PCODE_LEGACY_ATOR;
		break;
	case BASIC_SHOT:
		pcode = LL_PCODE_LEGACY_SHOT;
		break;
	case BIG_SHOT:
		pcode = LL_PCODE_LEGACY_SHOT_BIG;
		break;
	case BIRD:
		pcode = LL_PCODE_LEGACY_BIRD;
		break;
	case ROCK:
		pcode = LL_PCODE_LEGACY_ROCK;
		break;
	case SMOKE:
		pcode = LL_PCODE_LEGACY_SMOKE;
		break;
	case SPARK:
		pcode = LL_PCODE_LEGACY_SPARK;
		break;
		*/
	case PRIMITIVE_VOLUME:
		pcode = LL_PCODE_VOLUME;
		break;
	case GRASS:
		pcode = LL_PCODE_LEGACY_GRASS;
		break;
	case PART_SYS:
		pcode = LL_PCODE_LEGACY_PART_SYS;
		break;
	case PLAYER:
		pcode = LL_PCODE_LEGACY_AVATAR;
		break;
	case TREE:
		pcode = LL_PCODE_LEGACY_TREE;
		break;
	case TREE_NEW:
		pcode = LL_PCODE_TREE_NEW;
		break;
	default:
		LL_WARNS() << "Unknown legacy code " << legacy << " [" << (S32)legacy << "]!" << LL_ENDL;
	}

	return pcode;
}

U8 LLPrimitive::pCodeToLegacy(const LLPCode pcode)
{
	U8 legacy;
	switch (pcode)
	{
/*
	case LL_PCODE_CUBE:
		legacy = BOX;
		break;
	case LL_PCODE_CYLINDER:
		legacy = CYLINDER;
		break;
	case LL_PCODE_CONE:
		legacy = CONE;
		break;
	case LL_PCODE_CONE_HEMI:
		legacy = HALF_CONE;
		break;
	case LL_PCODE_CYLINDER_HEMI:
		legacy = HALF_CYLINDER;
		break;
	case LL_PCODE_SPHERE_HEMI:
		legacy = HALF_SPHERE;
		break;
	case LL_PCODE_PRISM:
		legacy = PRISM;
		break;
	case LL_PCODE_PYRAMID:
		legacy = PYRAMID;
		break;
	case LL_PCODE_SPHERE:
		legacy = SPHERE;
		break;
	case LL_PCODE_TETRAHEDRON:
		legacy = TETRAHEDRON;
		break;
	case LL_PCODE_LEGACY_ATOR:
		legacy = ATOR;
		break;
	case LL_PCODE_LEGACY_SHOT:
		legacy = BASIC_SHOT;
		break;
	case LL_PCODE_LEGACY_SHOT_BIG:
		legacy = BIG_SHOT;
		break;
	case LL_PCODE_LEGACY_BIRD:
		legacy = BIRD;
		break;		
	case LL_PCODE_LEGACY_DEMON:
		legacy = DEMON;
		break;
	case LL_PCODE_LEGACY_LSL_TEST:
		legacy = LSL_TEST;
		break;
	case LL_PCODE_LEGACY_ORACLE:
		legacy = ORACLE;
		break;
	case LL_PCODE_LEGACY_ROCK:
		legacy = ROCK;
		break;
	case LL_PCODE_LEGACY_TEXT_BUBBLE:
		legacy = TEXTBUBBLE;
		break;
	case LL_PCODE_LEGACY_SMOKE:
		legacy = SMOKE;
		break;
	case LL_PCODE_LEGACY_SPARK:
		legacy = SPARK;
		break;
*/
	case LL_PCODE_VOLUME:
		legacy = PRIMITIVE_VOLUME;
		break;
	case LL_PCODE_LEGACY_GRASS:
		legacy = GRASS;
		break;
	case LL_PCODE_LEGACY_PART_SYS:
		legacy = PART_SYS;
		break;
	case LL_PCODE_LEGACY_AVATAR:
		legacy = PLAYER;
		break;
	case LL_PCODE_LEGACY_TREE:
		legacy = TREE;
		break;
	case LL_PCODE_TREE_NEW:
		legacy = TREE_NEW;
		break;
	default:
		LL_WARNS() << "Unknown pcode " << (S32)pcode << ":" << pcode << "!" << LL_ENDL;
		return 0;
	}
	return legacy;
}


// static
// Don't crash or LL_ERRS() here!  This function is used for debug strings.
std::string LLPrimitive::pCodeToString(const LLPCode pcode)
{
	std::string pcode_string;

	U8 base_code = pcode & LL_PCODE_BASE_MASK;
	if (!pcode)
	{
		pcode_string = "null";
	}
	else if ((base_code) == LL_PCODE_LEGACY)
	{
		// It's a legacy object
		switch (pcode)
		{
		case LL_PCODE_LEGACY_GRASS:
		  pcode_string = "grass";
			break;
		case LL_PCODE_LEGACY_PART_SYS:
		  pcode_string = "particle system";
			break;
		case LL_PCODE_LEGACY_AVATAR:
		  pcode_string = "avatar";
			break;
		case LL_PCODE_LEGACY_TEXT_BUBBLE:
		  pcode_string = "text bubble";
			break;
		case LL_PCODE_LEGACY_TREE:
		  pcode_string = "tree";
			break;
		case LL_PCODE_TREE_NEW:
		  pcode_string = "tree_new";
			break;
		default:
		  pcode_string = llformat( "unknown legacy pcode %i",(U32)pcode);
		}
	}
	else
	{
		std::string shape;
		std::string mask;
		if (base_code == LL_PCODE_CUBE)
		{
			shape = "cube";
		}
		else if (base_code == LL_PCODE_CYLINDER)
		{
			shape = "cylinder";
		}
		else if (base_code == LL_PCODE_CONE)
		{
			shape = "cone";
		}
		else if (base_code == LL_PCODE_PRISM)
		{
			shape = "prism";
		}
		else if (base_code == LL_PCODE_PYRAMID)
		{
			shape = "pyramid";
		}
		else if (base_code == LL_PCODE_SPHERE)
		{
			shape = "sphere";
		}
		else if (base_code == LL_PCODE_TETRAHEDRON)
		{
			shape = "tetrahedron";
		}
		else if (base_code == LL_PCODE_VOLUME)
		{
			shape = "volume";
		}
		else if (base_code == LL_PCODE_APP)
		{
			shape = "app";
		}
		else
		{
			LL_WARNS() << "Unknown base mask for pcode: " << base_code << LL_ENDL;
		}

		U8 mask_code = pcode & (~LL_PCODE_BASE_MASK);
		if (base_code == LL_PCODE_APP)
		{
			mask = llformat( "%x", mask_code);
		}
		else if (mask_code & LL_PCODE_HEMI_MASK)
		{
			mask = "hemi";
		}
		else 
		{
			mask = llformat( "%x", mask_code);
		}

		if (mask[0])
		{
			pcode_string = llformat( "%s-%s", shape.c_str(), mask.c_str());
		}
		else
		{
			pcode_string = llformat( "%s", shape.c_str());
		}
	}

	return pcode_string;
}


void LLPrimitive::copyTEs(const LLPrimitive *primitivep)
{
	U32 i;
	if (primitivep->getExpectedNumTEs() != getExpectedNumTEs())
	{
		LL_WARNS() << "Primitives don't have same expected number of TE's" << LL_ENDL;
	}
	U32 num_tes = llmin(primitivep->getExpectedNumTEs(), getExpectedNumTEs());
	if (mTextureList.size() < getExpectedNumTEs())
	{
		mTextureList.setSize(getExpectedNumTEs());
	}
	for (i = 0; i < num_tes; i++)
	{
		mTextureList.copyTexture(i, *(primitivep->getTE(i)));
	}
}

S32	face_index_from_id(LLFaceID face_ID, const std::vector<LLProfile::Face>& faceArray)
{
	S32 i;
	for (i = 0; i < (S32)faceArray.size(); i++)
	{
		if (faceArray[i].mFaceID == face_ID)
		{
			return i;
		}
	}
	return -1;
}

BOOL LLPrimitive::setVolume(const LLVolumeParams &volume_params, const S32 detail, bool unique_volume)
{
	if (NO_LOD == detail)
	{
		// build the new object
		setChanged(GEOMETRY);
		sVolumeManager->unrefVolume(mVolumep);
		mVolumep = new LLVolume(volume_params, 1, TRUE, TRUE);
		setNumTEs(mVolumep->getNumFaces());
		return FALSE;
	}

	LLVolume *volumep;
	if (unique_volume)
	{
		F32 volume_detail = LLVolumeLODGroup::getVolumeScaleFromDetail(detail);
		if (mVolumep.notNull() && volume_params == mVolumep->getParams() && (volume_detail == mVolumep->getDetail()))
		{
			return FALSE;
		}
		volumep = new LLVolume(volume_params, volume_detail, FALSE, TRUE);
	}
	else
	{
		if (mVolumep.notNull())
		{
			F32 volume_detail = LLVolumeLODGroup::getVolumeScaleFromDetail(detail);
			if (volume_params == mVolumep->getParams() && (volume_detail == mVolumep->getDetail()))
			{
				return FALSE;
			}
		}

		volumep = sVolumeManager->refVolume(volume_params, detail);
		if (volumep == mVolumep)
		{
			sVolumeManager->unrefVolume( volumep );  // LLVolumeMgr::refVolume() creates a reference, but we don't need a second one.
			return TRUE;
		}
	}

	setChanged(GEOMETRY);

	
	if (!mVolumep)
	{
		mVolumep = volumep;
		//mFaceMask = mVolumep->generateFaceMask();
		setNumTEs(mVolumep->getNumFaces());
		return TRUE;
	}
	
#if 0 
	// #if 0'd out by davep
	// this is a lot of cruft to set texture entry values that just stay the same for LOD switch 
	// or immediately get overridden by an object update message, also crashes occasionally
	U32 old_face_mask = mVolumep->mFaceMask;

	S32 face_bit = 0;
	S32 cur_mask = 0;

	// Grab copies of the old faces from the original shape, ordered by type.
	// We will use these to figure out what old texture info gets mapped to new
	// faces in the new shape.
	std::vector<LLProfile::Face> old_faces; 
	for (S32 face = 0; face < mVolumep->getNumFaces(); face++)
	{
		old_faces.push_back(mVolumep->getProfile().mFaces[face]);
	}

	// Copy the old texture info off to the side, but not in the order in which
	// they live in the mTextureList, rather in order of ther "face id" which
	// is the corresponding value of LLVolueParams::LLProfile::mFaces::mIndex.
	//
	// Hence, some elements of old_tes::mEntryList will be invalid.  It is
	// initialized to a size of 9 (max number of possible faces on a volume?)
	// and only the ones with valid types are filled in.
	LLPrimTextureList old_tes;
	old_tes.setSize(9);
	for (face_bit = 0; face_bit < 9; face_bit++)
	{
		cur_mask = 0x1 << face_bit;
		if (old_face_mask & cur_mask)
		{
			S32 te_index = face_index_from_id(cur_mask, old_faces);
			old_tes.copyTexture(face_bit, *(getTE(te_index)));
			//LL_INFOS() << face_bit << ":" << te_index << ":" << old_tes[face_bit].getID() << LL_ENDL;
		}
	}


	// build the new object
	sVolumeManager->unrefVolume(mVolumep);
	mVolumep = volumep;
	
	U32 new_face_mask = mVolumep->mFaceMask;
	S32 i;

	if (old_face_mask == new_face_mask) 
	{
		// nothing to do
		return TRUE;
	}

	if (mVolumep->getNumFaces() == 0 && new_face_mask != 0)
	{
		LL_WARNS() << "Object with 0 faces found...INCORRECT!" << LL_ENDL;
		setNumTEs(mVolumep->getNumFaces());
		return TRUE;
	}

	// initialize face_mapping
	S32 face_mapping[9];
	for (face_bit = 0; face_bit < 9; face_bit++)
	{
		face_mapping[face_bit] = face_bit;
	}

	// The new shape may have more faces than the original, but we can't just
	// add them to the end -- the ordering matters and it may be that we must
	// insert the new faces in the middle of the list.  When we add a face it
	// will pick up the texture/color info of one of the old faces an so we
	// now figure out which old face info gets mapped to each new face, and 
	// store in the face_mapping lookup table.
	for (face_bit = 0; face_bit < 9; face_bit++)
	{
		cur_mask = 0x1 << face_bit;
		if (!(new_face_mask & cur_mask))
		{
			// Face doesn't exist in new map.
			face_mapping[face_bit] = -1;
			continue;
		}
		else if (old_face_mask & cur_mask)
		{
			// Face exists in new and old map.
			face_mapping[face_bit] = face_bit;
			continue;
		}

		// OK, how we've got a mismatch, where we have to fill a new face with one from
		// the old face.
		if (cur_mask & (LL_FACE_PATH_BEGIN | LL_FACE_PATH_END | LL_FACE_INNER_SIDE))
		{
			// It's a top/bottom/hollow interior face.
			if (old_face_mask & LL_FACE_PATH_END)
			{
				face_mapping[face_bit] = 1;
				continue;
			}
			else
			{
				S32 cur_outer_mask = LL_FACE_OUTER_SIDE_0;
				for (i = 0; i < 4; i++)
				{
					if (old_face_mask & cur_outer_mask)
					{
						face_mapping[face_bit] = 5 + i;
						break;
					}
					cur_outer_mask <<= 1;
				}
				if (i == 4)
				{
					LL_WARNS() << "No path end or outer face in volume!" << LL_ENDL;
				}
				continue;
			}
		}

		if (cur_mask & (LL_FACE_PROFILE_BEGIN | LL_FACE_PROFILE_END))
		{
			// A cut slice.  Use the hollow interior if we have it.
			if (old_face_mask & LL_FACE_INNER_SIDE)
			{
				face_mapping[face_bit] = 2;
				continue;
			}

			// No interior, use the bottom face.
			// Could figure out which of the outer faces was nearest, but that would be harder.
			if (old_face_mask & LL_FACE_PATH_END)
			{
				face_mapping[face_bit] = 1;
				continue;
			}
			else
			{
				S32 cur_outer_mask = LL_FACE_OUTER_SIDE_0;
				for (i = 0; i < 4; i++)
				{
					if (old_face_mask & cur_outer_mask)
					{
						face_mapping[face_bit] = 5 + i;
						break;
					}
					cur_outer_mask <<= 1;
				}
				if (i == 4)
				{
					LL_WARNS() << "No path end or outer face in volume!" << LL_ENDL;
				}
				continue;
			}
		}

		// OK, the face that's missing is an outer face...
		// Pull from the nearest adjacent outer face (there's always guaranteed to be one...
		S32 cur_outer = face_bit - 5;
		S32 min_dist = 5;
		S32 min_outer_bit = -1;
		S32 i;
		for (i = 0; i < 4; i++)
		{
			if (old_face_mask & (LL_FACE_OUTER_SIDE_0 << i))
			{
				S32 dist = abs(i - cur_outer);
				if (dist < min_dist)
				{
					min_dist = dist;
					min_outer_bit = i + 5;
				}
			}
		}
		if (-1 == min_outer_bit)
		{
			LL_INFOS() << (LLVolume *)mVolumep << LL_ENDL;
			LL_WARNS() << "Bad!  No outer faces, impossible!" << LL_ENDL;
		}
		face_mapping[face_bit] = min_outer_bit;
	}
	

	setNumTEs(mVolumep->getNumFaces());
	for (face_bit = 0; face_bit < 9; face_bit++)
	{
		// For each possible face type on the new shape we check to see if that
		// face exists and if it does we create a texture entry that is a copy
		// of one of the originals.  Since the originals might not have a
		// matching face, we use the face_mapping lookup table to figure out
		// which face information to copy.
		cur_mask = 0x1 << face_bit;
		if (new_face_mask & cur_mask)
		{
			if (-1 == face_mapping[face_bit])
			{
				LL_WARNS() << "No mapping from old face to new face!" << LL_ENDL;
			}

			S32 te_num = face_index_from_id(cur_mask, mVolumep->getProfile().mFaces);
			setTE(te_num, *(old_tes.getTexture(face_mapping[face_bit])));
		}
	}
#else
	// build the new object
	sVolumeManager->unrefVolume(mVolumep);
	mVolumep = volumep; 

	setNumTEs(mVolumep->getNumFaces());
#endif
	return TRUE;
}

BOOL LLPrimitive::setMaterial(U8 material)
{
	if (material != mMaterial)
	{
		mMaterial = material;
		return TRUE;
	}
	else
	{
		return FALSE;
	}
}

S32 LLPrimitive::packTEField(U8 *cur_ptr, U8 *data_ptr, U8 data_size, U8 last_face_index, EMsgVariableType type) const
{
	S32 face_index;
	S32 i;
	U64 exception_faces;
	U8 *start_loc = cur_ptr;

	htolememcpy(cur_ptr,data_ptr + (last_face_index * data_size), type, data_size);
	cur_ptr += data_size;
	
	for (face_index = last_face_index-1; face_index >= 0; face_index--)
	{
		BOOL already_sent = FALSE;
		for (i = face_index+1; i <= last_face_index; i++)
		{ 
			if (!memcmp(data_ptr+(data_size *face_index), data_ptr+(data_size *i), data_size))
			{
				already_sent = TRUE;
				break;
			}
		}

		if (!already_sent)
		{
			exception_faces = 0;
			for (i = face_index; i >= 0; i--)
			{ 
				if (!memcmp(data_ptr+(data_size *face_index), data_ptr+(data_size *i), data_size))
				{
					exception_faces |= ((U64)1 << i); 
				}
			}
			
			//assign exception faces to cur_ptr
			if (exception_faces >= ((U64)0x1 << 7))
			{
				if (exception_faces >= ((U64)0x1 << 14))
				{
					if (exception_faces >= ((U64)0x1 << 21))
					{
						if (exception_faces >= ((U64)0x1 << 28))
						{
							if (exception_faces >= ((U64)0x1 << 35))
							{
								if (exception_faces >= ((U64)0x1 << 42))
								{
									if (exception_faces >= ((U64)0x1 << 49))
									{
										*cur_ptr++ = (U8)(((exception_faces >> 49) & 0x7F) | 0x80);
									}
									*cur_ptr++ = (U8)(((exception_faces >> 42) & 0x7F) | 0x80);
								}
								*cur_ptr++ = (U8)(((exception_faces >> 35) & 0x7F) | 0x80);
							}
							*cur_ptr++ = (U8)(((exception_faces >> 28) & 0x7F) | 0x80);
						}
						*cur_ptr++ = (U8)(((exception_faces >> 21) & 0x7F) | 0x80);
					}
					*cur_ptr++ = (U8)(((exception_faces >> 14) & 0x7F) | 0x80);
				}
				*cur_ptr++ = (U8)(((exception_faces >> 7) & 0x7F) | 0x80);
			}

			
			*cur_ptr++ = (U8)(exception_faces & 0x7F);
			
			htolememcpy(cur_ptr,data_ptr + (face_index * data_size), type, data_size);
			cur_ptr += data_size;
   		}
	}
	return (S32)(cur_ptr - start_loc);
}

namespace
{
    template< typename T >
    bool unpack_TEField(T dest[], U8 dest_count, U8 * &source, U8 *source_end, EMsgVariableType type)
    {
        const size_t size(sizeof(T));

        LL_DEBUGS("TEXTUREENTRY") << "Request to read items of size " << size << " with swizzle " << type << " froum buffer sized " << (source_end - source) << LL_ENDL;

        if ((source + size + 1) > source_end)
        {
            // we add 1 above to take into account the byte that we know must follow the value.
            LL_WARNS("TEXTUREENTRY") << "Buffer exhausted! Requires " << size << " + 1 bytes for default, " << (source_end - source) << " bytes remaning." << LL_ENDL;
            source = source_end;
            return false;
        }

        // Extract the default value and fill the array. 
        htolememcpy(dest, source, type, size);
        source += size;
        for (S32 idx = 1; idx < dest_count; ++idx)
        {
            dest[idx] = dest[0];
        }

        while (source < source_end)
        {
            U64 index_flags(0);
            U8  sbit(0);

            // Unpack the variable length bitfield. Each bit represents whether the following 
            // value will be placed at the corresponding array index.
            do
            {
                if (source >= source_end)
                {
                    LL_WARNS("TEXTUREENTRY") << "Buffer exhausted! Reading index flags." << LL_ENDL;
                    source = source_end;
                    return false;
                }

                sbit = *source++;
                index_flags <<= 7;    // original code had this after?
                index_flags |= (sbit & 0x7F);
            } while (sbit & 0x80);

            if (!index_flags)
            {   // We've hit the terminating 0 byte.
                break;
            }

            if ((source + size + 1) > source_end)
            {
                // we add 1 above to take into account the byte that we know must follow the value.
                LL_WARNS("TEXTUREENTRY") << "Buffer exhausted! Requires " << size << " + 1 bytes for default, " << (source_end - source) << " bytes remaning." << LL_ENDL;
                source = source_end;
                return false;
            }

            // get the value for the indexs.
            T value;
            htolememcpy(&value, source, type, size);
            source += size;

            for (S32 idx = 0; idx < dest_count; idx++)
            {
                if (index_flags & 1ULL << idx)
                {
                    dest[idx] = value;
                }
            }

        }
        return true;
    }
}



// Pack information about all texture entries into container:
// { TextureEntry Variable 2 }
// Includes information about image ID, color, scale S,T, offset S,T and rotation
BOOL LLPrimitive::packTEMessage(LLMessageSystem *mesgsys) const
{
	const U32 MAX_TES = 45;

	U8     image_ids[MAX_TES*16];
	U8     colors[MAX_TES*4];
	F32    scale_s[MAX_TES];
	F32    scale_t[MAX_TES];
	S16    offset_s[MAX_TES];
	S16    offset_t[MAX_TES];
	S16    image_rot[MAX_TES];
	U8	   bump[MAX_TES];
	U8	   media_flags[MAX_TES];
    U8     glow[MAX_TES];
	U8     material_data[MAX_TES*16];
	
	const U32 MAX_TE_BUFFER = 4096;
	U8 packed_buffer[MAX_TE_BUFFER];
	U8 *cur_ptr = packed_buffer;
	
	S32 last_face_index = llmin((U32) getNumTEs(), MAX_TES) - 1;
	
	if (last_face_index > -1)
	{
		// ...if we hit the front, send one image id
		S8 face_index;
		LLColor4U coloru;
		for (face_index = 0; face_index <= last_face_index; face_index++)
		{
			// Directly sending image_ids is not safe!
			memcpy(&image_ids[face_index*16],getTE(face_index)->getID().mData,16);	/* Flawfinder: ignore */ 

			// Cast LLColor4 to LLColor4U
			coloru.setVec( getTE(face_index)->getColor() );

			// Note:  This is an optimization to send common colors (1.f, 1.f, 1.f, 1.f)
			// as all zeros.  However, the subtraction and addition must be done in unsigned
			// byte space, not in float space, otherwise off-by-one errors occur. JC
			colors[4*face_index]     = 255 - coloru.mV[0];
			colors[4*face_index + 1] = 255 - coloru.mV[1];
			colors[4*face_index + 2] = 255 - coloru.mV[2];
			colors[4*face_index + 3] = 255 - coloru.mV[3];

			const LLTextureEntry* te = getTE(face_index);
			scale_s[face_index] = (F32) te->mScaleS;
			scale_t[face_index] = (F32) te->mScaleT;
			offset_s[face_index] = (S16) ll_round((llclamp(te->mOffsetS,-1.0f,1.0f) * (F32)0x7FFF)) ;
			offset_t[face_index] = (S16) ll_round((llclamp(te->mOffsetT,-1.0f,1.0f) * (F32)0x7FFF)) ;
			image_rot[face_index] = (S16) ll_round(((fmod(te->mRotation, F_TWO_PI)/F_TWO_PI) * TEXTURE_ROTATION_PACK_FACTOR));
			bump[face_index] = te->getBumpShinyFullbright();
			media_flags[face_index] = te->getMediaTexGen();
			glow[face_index] = (U8) ll_round((llclamp(te->getGlow(), 0.0f, 1.0f) * (F32)0xFF));

			// Directly sending material_ids is not safe!
			memcpy(&material_data[face_index*16],getTE(face_index)->getMaterialID().get(),16);	/* Flawfinder: ignore */ 
		}

		cur_ptr += packTEField(cur_ptr, (U8 *)image_ids, sizeof(LLUUID),last_face_index, MVT_LLUUID);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)colors, 4 ,last_face_index, MVT_U8);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)scale_s, 4 ,last_face_index, MVT_F32);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)scale_t, 4 ,last_face_index, MVT_F32);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)offset_s, 2 ,last_face_index, MVT_S16Array);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)offset_t, 2 ,last_face_index, MVT_S16Array);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)image_rot, 2 ,last_face_index, MVT_S16Array);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)bump, 1 ,last_face_index, MVT_U8);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)media_flags, 1 ,last_face_index, MVT_U8);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)glow, 1 ,last_face_index, MVT_U8);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)material_data, 16, last_face_index, MVT_LLUUID);
	}
   	mesgsys->addBinaryDataFast(_PREHASH_TextureEntry, packed_buffer, (S32)(cur_ptr - packed_buffer));

	return FALSE;
}


BOOL LLPrimitive::packTEMessage(LLDataPacker &dp) const
{
	const U32 MAX_TES = 45;

	U8     image_ids[MAX_TES*16];
	U8     colors[MAX_TES*4];
	F32    scale_s[MAX_TES];
	F32    scale_t[MAX_TES];
	S16    offset_s[MAX_TES];
	S16    offset_t[MAX_TES];
	S16    image_rot[MAX_TES];
	U8	   bump[MAX_TES];
	U8	   media_flags[MAX_TES];
    U8     glow[MAX_TES];
	U8     material_data[MAX_TES*16];
	
	const U32 MAX_TE_BUFFER = 4096;
	U8 packed_buffer[MAX_TE_BUFFER];
	U8 *cur_ptr = packed_buffer;
	
	S32 last_face_index = getNumTEs() - 1;
	
	if (last_face_index > -1)
	{
		// ...if we hit the front, send one image id
		S8 face_index;
		LLColor4U coloru;
		for (face_index = 0; face_index <= last_face_index; face_index++)
		{
			// Directly sending image_ids is not safe!
			memcpy(&image_ids[face_index*16],getTE(face_index)->getID().mData,16);	/* Flawfinder: ignore */ 

			// Cast LLColor4 to LLColor4U
			coloru.setVec( getTE(face_index)->getColor() );

			// Note:  This is an optimization to send common colors (1.f, 1.f, 1.f, 1.f)
			// as all zeros.  However, the subtraction and addition must be done in unsigned
			// byte space, not in float space, otherwise off-by-one errors occur. JC
			colors[4*face_index]     = 255 - coloru.mV[0];
			colors[4*face_index + 1] = 255 - coloru.mV[1];
			colors[4*face_index + 2] = 255 - coloru.mV[2];
			colors[4*face_index + 3] = 255 - coloru.mV[3];

			const LLTextureEntry* te = getTE(face_index);
			scale_s[face_index] = (F32) te->mScaleS;
			scale_t[face_index] = (F32) te->mScaleT;
			offset_s[face_index] = (S16) ll_round((llclamp(te->mOffsetS,-1.0f,1.0f) * (F32)0x7FFF)) ;
			offset_t[face_index] = (S16) ll_round((llclamp(te->mOffsetT,-1.0f,1.0f) * (F32)0x7FFF)) ;
			image_rot[face_index] = (S16) ll_round(((fmod(te->mRotation, F_TWO_PI)/F_TWO_PI) * TEXTURE_ROTATION_PACK_FACTOR));
			bump[face_index] = te->getBumpShinyFullbright();
			media_flags[face_index] = te->getMediaTexGen();
            glow[face_index] = (U8) ll_round((llclamp(te->getGlow(), 0.0f, 1.0f) * (F32)0xFF));

			// Directly sending material_ids is not safe!
			memcpy(&material_data[face_index*16],getTE(face_index)->getMaterialID().get(),16);	/* Flawfinder: ignore */ 
		}

		cur_ptr += packTEField(cur_ptr, (U8 *)image_ids, sizeof(LLUUID),last_face_index, MVT_LLUUID);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)colors, 4 ,last_face_index, MVT_U8);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)scale_s, 4 ,last_face_index, MVT_F32);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)scale_t, 4 ,last_face_index, MVT_F32);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)offset_s, 2 ,last_face_index, MVT_S16Array);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)offset_t, 2 ,last_face_index, MVT_S16Array);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)image_rot, 2 ,last_face_index, MVT_S16Array);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)bump, 1 ,last_face_index, MVT_U8);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)media_flags, 1 ,last_face_index, MVT_U8);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)glow, 1 ,last_face_index, MVT_U8);
		*cur_ptr++ = 0;
		cur_ptr += packTEField(cur_ptr, (U8 *)material_data, 16, last_face_index, MVT_LLUUID);
	}

	dp.packBinaryData(packed_buffer, (S32)(cur_ptr - packed_buffer), "TextureEntry");
	return FALSE;
}

S32 LLPrimitive::parseTEMessage(LLMessageSystem* mesgsys, char const* block_name, const S32 block_num, LLTEContents& tec)
{
	S32 retval = 0;
    // temp buffer for material ID processing
    // data will end up in tec.material_id[]	
    material_id_type material_data[LLTEContents::MAX_TES];

	if (block_num < 0)
	{
		tec.size = mesgsys->getSizeFast(block_name, _PREHASH_TextureEntry);
	}
	else
	{
		tec.size = mesgsys->getSizeFast(block_name, block_num, _PREHASH_TextureEntry);
	}

	if (tec.size == 0)
	{
		tec.face_count = 0;
		return retval;
	}
    else if (tec.size >= LLTEContents::MAX_TE_BUFFER)
    {
        LL_WARNS("TEXTUREENTRY") << "Excessive buffer size detected in Texture Entry! Truncating." << LL_ENDL;
        tec.size = LLTEContents::MAX_TE_BUFFER - 1;
    }

    // if block_num < 0 ask for block 0
    mesgsys->getBinaryDataFast(block_name, _PREHASH_TextureEntry, tec.packed_buffer, 0, std::max(block_num, 0), LLTEContents::MAX_TE_BUFFER - 1);

    // The last field is not zero terminated.  
    // Rather than special case the upack functions.  Just make it 0x00 terminated.
    tec.packed_buffer[tec.size] = 0x00;
    ++tec.size;

	tec.face_count = llmin((U32)getNumTEs(),(U32)LLTEContents::MAX_TES);

	U8 *cur_ptr = tec.packed_buffer;
    LL_DEBUGS("TEXTUREENTRY") << "Texture Entry with buffere sized: " << tec.size << LL_ENDL;
    U8 *buffer_end = tec.packed_buffer + tec.size;

    if (!(  unpack_TEField<LLUUID>(tec.image_data, tec.face_count, cur_ptr, buffer_end, MVT_LLUUID) &&
            unpack_TEField<LLColor4U>(tec.colors, tec.face_count, cur_ptr, buffer_end, MVT_U8) &&
            unpack_TEField<F32>(tec.scale_s, tec.face_count, cur_ptr, buffer_end, MVT_F32) &&
            unpack_TEField<F32>(tec.scale_t, tec.face_count, cur_ptr, buffer_end, MVT_F32) &&
            unpack_TEField<S16>(tec.offset_s, tec.face_count, cur_ptr, buffer_end, MVT_S16) &&
            unpack_TEField<S16>(tec.offset_t, tec.face_count, cur_ptr, buffer_end, MVT_S16) &&
            unpack_TEField<S16>(tec.image_rot, tec.face_count, cur_ptr, buffer_end, MVT_S16) &&
            unpack_TEField<U8>(tec.bump, tec.face_count, cur_ptr, buffer_end, MVT_U8) &&
            unpack_TEField<U8>(tec.media_flags, tec.face_count, cur_ptr, buffer_end, MVT_U8) &&
            unpack_TEField<U8>(tec.glow, tec.face_count, cur_ptr, buffer_end, MVT_U8)))
    {
        LL_WARNS("TEXTUREENTRY") << "Failure parsing Texture Entry Message due to malformed TE Field! Dropping changes on the floor. " << LL_ENDL;
        return 0;
    }

	if (cur_ptr >= buffer_end || !unpack_TEField<material_id_type>(material_data, tec.face_count, cur_ptr, buffer_end, MVT_LLUUID))
	{
		memset((void*)material_data, 0, sizeof(material_data));
	}
	
	for (U32 i = 0; i < tec.face_count; i++)
	{
		tec.material_ids[i].set(&(material_data[i]));
	}
	
	retval = 1;
	return retval;
	}
	
S32 LLPrimitive::applyParsedTEMessage(LLTEContents& tec)
{
	S32 retval = 0;
	
	LLColor4 color;
	for (U32 i = 0; i < tec.face_count; i++)
	{
		LLUUID& req_id = ((LLUUID*)tec.image_data)[i];
		retval |= setTETexture(i, req_id);
		retval |= setTEScale(i, tec.scale_s[i], tec.scale_t[i]);
		retval |= setTEOffset(i, (F32)tec.offset_s[i] / (F32)0x7FFF, (F32) tec.offset_t[i] / (F32) 0x7FFF);
		retval |= setTERotation(i, ((F32)tec.image_rot[i] / TEXTURE_ROTATION_PACK_FACTOR) * F_TWO_PI);
		retval |= setTEBumpShinyFullbright(i, tec.bump[i]);
		retval |= setTEMediaTexGen(i, tec.media_flags[i]);
		retval |= setTEGlow(i, (F32)tec.glow[i] / (F32)0xFF);
		retval |= setTEMaterialID(i, tec.material_ids[i]);

		// Note:  This is an optimization to send common colors (1.f, 1.f, 1.f, 1.f)
		// as all zeros.  However, the subtraction and addition must be done in unsigned
		// byte space, not in float space, otherwise off-by-one errors occur. JC
		color.mV[VRED]		= F32(255 - tec.colors[i].mV[VRED])   / 255.f;
		color.mV[VGREEN]	= F32(255 - tec.colors[i].mV[VGREEN]) / 255.f;
		color.mV[VBLUE]		= F32(255 - tec.colors[i].mV[VBLUE])  / 255.f;
		color.mV[VALPHA]	= F32(255 - tec.colors[i].mV[VALPHA]) / 255.f;

		retval |= setTEColor(i, color);
	}

	return retval;
}

S32 LLPrimitive::unpackTEMessage(LLMessageSystem* mesgsys, char const* block_name, const S32 block_num)
{
	LLTEContents tec;
	S32 retval = parseTEMessage(mesgsys, block_name, block_num, tec);
	if (!retval)
		return retval;
	return applyParsedTEMessage(tec);
}

S32 LLPrimitive::unpackTEMessage(LLDataPacker &dp)
{
	// use a negative block_num to indicate a single-block read (a non-variable block)
	S32 retval = 0;
	const U32 MAX_TES = 45;

	// Avoid construction of 32 UUIDs per call
	static LLMaterialID material_ids[MAX_TES];

    const U32 MAX_TE_BUFFER = 4096;
    U8 packed_buffer[MAX_TE_BUFFER];
    memset((void*)packed_buffer, 0, MAX_TE_BUFFER);

    LLUUID      image_data[MAX_TES];
    LLColor4U   colors[MAX_TES];
    F32         scale_s[MAX_TES];
    F32         scale_t[MAX_TES];
    S16         offset_s[MAX_TES];
    S16         offset_t[MAX_TES];
    S16         image_rot[MAX_TES];
    U8          bump[MAX_TES];
    U8          media_flags[MAX_TES];
    U8          glow[MAX_TES];
    material_id_type material_data[MAX_TES];
    
    memset((void*)scale_s, 0, sizeof(scale_s));
    memset((void*)scale_t, 0, sizeof(scale_t));
    memset((void*)offset_s, 0, sizeof(offset_s));
    memset((void*)offset_t, 0, sizeof(offset_t));
    memset((void*)image_rot, 0, sizeof(image_rot));
    memset((void*)bump, 0, sizeof(bump));
    memset((void*)media_flags, 0, sizeof(media_flags));
    memset((void*)glow, 0, sizeof(glow));

	S32 size;
	U32 face_count = 0;

	if (!dp.unpackBinaryData(packed_buffer, size, "TextureEntry"))
	{
		retval = TEM_INVALID;
		LL_WARNS() << "Bad texture entry block!  Abort!" << LL_ENDL;
		return retval;
	}

	if (size == 0)
	{
		return retval;
	}
    else if (size >= MAX_TE_BUFFER)
    {
        LL_WARNS("TEXTUREENTRY") << "Excessive buffer size detected in Texture Entry! Truncating." << LL_ENDL;
        size = MAX_TE_BUFFER - 1;
    }

    // The last field is not zero terminated.  
    // Rather than special case the upack functions.  Just make it 0x00 terminated.
    packed_buffer[size] = 0x00;
    ++size;
	face_count = llmin((U32) getNumTEs(), MAX_TES);
	U32 i;

    U8 *cur_ptr = packed_buffer;
    LL_DEBUGS("TEXTUREENTRY") << "Texture Entry with buffer sized: " << size << LL_ENDL;
    U8 *buffer_end = packed_buffer + size;

    if (!(  unpack_TEField<LLUUID>(image_data, face_count, cur_ptr, buffer_end, MVT_LLUUID) &&
            unpack_TEField<LLColor4U>(colors, face_count, cur_ptr, buffer_end, MVT_U8) &&
            unpack_TEField<F32>(scale_s, face_count, cur_ptr, buffer_end, MVT_F32) &&
            unpack_TEField<F32>(scale_t, face_count, cur_ptr, buffer_end, MVT_F32) &&
            unpack_TEField<S16>(offset_s, face_count, cur_ptr, buffer_end, MVT_S16) &&
            unpack_TEField<S16>(offset_t, face_count, cur_ptr, buffer_end, MVT_S16) &&
            unpack_TEField<S16>(image_rot, face_count, cur_ptr, buffer_end, MVT_S16) &&
            unpack_TEField<U8>(bump, face_count, cur_ptr, buffer_end, MVT_U8) &&
            unpack_TEField<U8>(media_flags, face_count, cur_ptr, buffer_end, MVT_U8) &&
            unpack_TEField<U8>(glow, face_count, cur_ptr, buffer_end, MVT_U8)))
    {
        LL_WARNS("TEXTUREENTRY") << "Failure parsing Texture Entry Message due to malformed TE Field! Dropping changes on the floor. " << LL_ENDL;
        return 0;
    }

	if (cur_ptr >= buffer_end || !unpack_TEField<material_id_type>(material_data, face_count, cur_ptr, buffer_end, MVT_LLUUID))
	{
		memset((void*)material_data, 0, sizeof(material_data));
	}

	for (i = 0; i < face_count; i++)
	{
		material_ids[i].set(&(material_data[i]));
	}
	
	LLColor4 color;
	for (i = 0; i < face_count; i++)
	{
        retval |= setTETexture(i, ((LLUUID*)image_data)[i]);
		retval |= setTEScale(i, scale_s[i], scale_t[i]);
		retval |= setTEOffset(i, (F32)offset_s[i] / (F32)0x7FFF, (F32) offset_t[i] / (F32) 0x7FFF);
		retval |= setTERotation(i, ((F32)image_rot[i] / TEXTURE_ROTATION_PACK_FACTOR) * F_TWO_PI);
		retval |= setTEBumpShinyFullbright(i, bump[i]);
		retval |= setTEMediaTexGen(i, media_flags[i]);
		retval |= setTEGlow(i, (F32)glow[i] / (F32)0xFF);
		retval |= setTEMaterialID(i, material_ids[i]);

		// Note:  This is an optimization to send common colors (1.f, 1.f, 1.f, 1.f)
		// as all zeros.  However, the subtraction and addition must be done in unsigned
		// byte space, not in float space, otherwise off-by-one errors occur. JC
		color.mV[VRED]		= F32(255 - colors[i].mV[VRED])   / 255.f;
 		color.mV[VGREEN]	= F32(255 - colors[i].mV[VGREEN]) / 255.f;
 		color.mV[VBLUE]		= F32(255 - colors[i].mV[VBLUE])  / 255.f;
 		color.mV[VALPHA]	= F32(255 - colors[i].mV[VALPHA]) / 255.f;

		retval |= setTEColor(i, color);
	}

	return retval;
}

U8	LLPrimitive::getExpectedNumTEs() const
{
	U8 expected_face_count = 0;
	if (mVolumep)
	{
		expected_face_count = mVolumep->getNumFaces();
	}
	return expected_face_count;
}

void LLPrimitive::copyTextureList(const LLPrimTextureList& other_list)
{
	mTextureList.copy(other_list);
}

void LLPrimitive::takeTextureList(LLPrimTextureList& other_list)
{
	mTextureList.take(other_list);
}

void LLPrimitive::updateNumBumpmap(const U8 index, const U8 bump)
{
	LLTextureEntry* te = getTE(index);
	if(!te)
	{
		return;
	}

	U8 old_bump = te->getBumpmap();	
	if(old_bump > 0)
	{
		mNumBumpmapTEs--;
	}
	if((bump & TEM_BUMP_MASK) > 0)
	{
		mNumBumpmapTEs++;
	}

	return;
}
//============================================================================

// Moved from llselectmgr.cpp
// BUG: Only works for boxes.
// Face numbering for flex boxes as of 1.14.2

// static
bool LLPrimitive::getTESTAxes(const U8 face, U32* s_axis, U32* t_axis)
{
	if (face == 0)
	{
		*s_axis = VX; *t_axis = VY;
		return true;
	}
	else if (face == 1)
	{
		*s_axis = VX; *t_axis = VZ;
		return true;
	}
	else if (face == 2)
	{
		*s_axis = VY; *t_axis = VZ;
		return true;
	}
	else if (face == 3)
	{
		*s_axis = VX; *t_axis = VZ;
		return true;
	}
	else if (face == 4)
	{
		*s_axis = VY; *t_axis = VZ;
		return true;
	}
	else if (face >= 5)
	{
		*s_axis = VX; *t_axis = VY;
		return true;
	}
	else
	{
		// unknown face
		return false;
	}
}

//============================================================================

//static 
BOOL LLNetworkData::isValid(U16 param_type, U32 size)
{
	// ew - better mechanism needed
	
	switch(param_type)
	{
	case PARAMS_FLEXIBLE:
		return (size == 16);
	case PARAMS_LIGHT:
		return (size == 16);
	case PARAMS_SCULPT:
		return (size == 17);
	case PARAMS_LIGHT_IMAGE:
		return (size == 28);
    case PARAMS_EXTENDED_MESH:
        return (size == 4);
    case PARAMS_RENDER_MATERIAL:
        return (size == 16);
	}
	
	return FALSE;
}

//============================================================================

LLLightParams::LLLightParams()
{
	mColor.setToWhite();
	mRadius = 10.f;
	mCutoff = 0.0f;
	mFalloff = 0.75f;

	mType = PARAMS_LIGHT;
}

BOOL LLLightParams::pack(LLDataPacker &dp) const
{
	LLColor4U color4u(mColor);
	dp.packColor4U(color4u, "color");
	dp.packF32(mRadius, "radius");
	dp.packF32(mCutoff, "cutoff");
	dp.packF32(mFalloff, "falloff");
	return TRUE;
}

BOOL LLLightParams::unpack(LLDataPacker &dp)
{
	LLColor4U color;
	dp.unpackColor4U(color, "color");
	setLinearColor(LLColor4(color));

	F32 radius;
	dp.unpackF32(radius, "radius");
	setRadius(radius);

	F32 cutoff;
	dp.unpackF32(cutoff, "cutoff");
	setCutoff(cutoff);

	F32 falloff;
	dp.unpackF32(falloff, "falloff");
	setFalloff(falloff);
	
	return TRUE;
}

bool LLLightParams::operator==(const LLNetworkData& data) const
{
	if (data.mType != PARAMS_LIGHT)
	{
		return false;
	}
	const LLLightParams *param = (const LLLightParams*)&data;
	if (param->mColor != mColor ||
		param->mRadius != mRadius ||
		param->mCutoff != mCutoff ||
		param->mFalloff != mFalloff)
	{
		return false;
	}
	return true;
}

void LLLightParams::copy(const LLNetworkData& data)
{
	const LLLightParams *param = (LLLightParams*)&data;
	mType = param->mType;
	mColor = param->mColor;
	mRadius = param->mRadius;
	mCutoff = param->mCutoff;
	mFalloff = param->mFalloff;
}

LLSD LLLightParams::asLLSD() const
{
	LLSD sd;
	
	sd["color"] = ll_sd_from_color4(getLinearColor());
	sd["radius"] = getRadius();
	sd["falloff"] = getFalloff();
	sd["cutoff"] = getCutoff();
		
	return sd;
}

bool LLLightParams::fromLLSD(LLSD& sd)
{
	const char *w;
	w = "color";
	if (sd.has(w))
	{
		setLinearColor( ll_color4_from_sd(sd["color"]) );
	} else goto fail;
	w = "radius";
	if (sd.has(w))
	{
		setRadius( (F32)sd[w].asReal() );
	} else goto fail;
	w = "falloff";
	if (sd.has(w))
	{
		setFalloff( (F32)sd[w].asReal() );
	} else goto fail;
	w = "cutoff";
	if (sd.has(w))
	{
		setCutoff( (F32)sd[w].asReal() );
	} else goto fail;
	
	return true;
 fail:
	return false;
}

//============================================================================

LLReflectionProbeParams::LLReflectionProbeParams()
{
    mType = PARAMS_REFLECTION_PROBE;
}

BOOL LLReflectionProbeParams::pack(LLDataPacker& dp) const
{
    dp.packF32(mAmbiance, "ambiance");
    dp.packF32(mClipDistance, "clip_distance");
    dp.packU8(mVolumeType, "volume_type");
    return TRUE;
}

BOOL LLReflectionProbeParams::unpack(LLDataPacker& dp)
{
    F32 ambiance;
    F32 clip_distance;
    U8 volume_type;

    dp.unpackF32(ambiance, "ambiance");
    setAmbiance(ambiance);

    dp.unpackF32(clip_distance, "clip_distance");
    setClipDistance(clip_distance);

    dp.unpackU8(volume_type, "volume_type");
    setVolumeType((EInfluenceVolumeType)volume_type);

    return TRUE;
}

bool LLReflectionProbeParams::operator==(const LLNetworkData& data) const
{
    if (data.mType != PARAMS_REFLECTION_PROBE)
    {
        return false;
    }
    const LLReflectionProbeParams* param = (const LLReflectionProbeParams*)&data;
    if (param->mAmbiance != mAmbiance)
    {
        return false;
    }
    if (param->mClipDistance != mClipDistance)
    {
        return false;
    }
    if (param->mVolumeType != mVolumeType)
    {
        return false;
    }
    return true;
}

void LLReflectionProbeParams::copy(const LLNetworkData& data)
{
    const LLReflectionProbeParams* param = (LLReflectionProbeParams*)&data;
    mType = param->mType;
    mAmbiance = param->mAmbiance;
    mClipDistance = param->mClipDistance;
    mVolumeType = param->mVolumeType;
}

LLSD LLReflectionProbeParams::asLLSD() const
{
    LLSD sd;
    sd["ambiance"] = getAmbiance();
    sd["clip_distance"] = getClipDistance();
    sd["volume_type"] = getVolumeType();
    return sd;
}

bool LLReflectionProbeParams::fromLLSD(LLSD& sd)
{
    if (!sd.has("ambiance") ||
        !sd.has("clip_distance") ||
        !sd.has("volume_type"))
    {
        return false;
    }

    setAmbiance((F32)sd["ambiance"].asReal());
    setClipDistance((F32)sd["clip_distance"].asReal());
    setVolumeType((EInfluenceVolumeType)sd["volume_type"].asInteger());

    return true;
}
//============================================================================
LLFlexibleObjectData::LLFlexibleObjectData()
{
	mSimulateLOD				= FLEXIBLE_OBJECT_DEFAULT_NUM_SECTIONS;
	mGravity					= FLEXIBLE_OBJECT_DEFAULT_GRAVITY;
	mAirFriction				= FLEXIBLE_OBJECT_DEFAULT_AIR_FRICTION;
	mWindSensitivity			= FLEXIBLE_OBJECT_DEFAULT_WIND_SENSITIVITY;
	mTension					= FLEXIBLE_OBJECT_DEFAULT_TENSION;
	//mUsingCollisionSphere		= FLEXIBLE_OBJECT_DEFAULT_USING_COLLISION_SPHERE;
	//mRenderingCollisionSphere	= FLEXIBLE_OBJECT_DEFAULT_RENDERING_COLLISION_SPHERE;
	mUserForce					= LLVector3(0.f, 0.f, 0.f);

	mType = PARAMS_FLEXIBLE;
}

BOOL LLFlexibleObjectData::pack(LLDataPacker &dp) const
{
	// Custom, uber-svelte pack "softness" in upper bits of tension & drag
	U8 bit1 = (mSimulateLOD & 2) << 6;
	U8 bit2 = (mSimulateLOD & 1) << 7;
	dp.packU8((U8)(mTension*10.01f) + bit1, "tension");
	dp.packU8((U8)(mAirFriction*10.01f) + bit2, "drag");
	dp.packU8((U8)((mGravity+10.f)*10.01f), "gravity");
	dp.packU8((U8)(mWindSensitivity*10.01f), "wind");
	dp.packVector3(mUserForce, "userforce");
	return TRUE;
}

BOOL LLFlexibleObjectData::unpack(LLDataPacker &dp)
{
	U8 tension, friction, gravity, wind;
	U8 bit1, bit2;
	dp.unpackU8(tension, "tension");	bit1 = (tension >> 6) & 2;
										mTension = ((F32)(tension&0x7f))/10.f;
	dp.unpackU8(friction, "drag");		bit2 = (friction >> 7) & 1;
										mAirFriction = ((F32)(friction&0x7f))/10.f;
										mSimulateLOD = bit1 | bit2;
	dp.unpackU8(gravity, "gravity");	mGravity = ((F32)gravity)/10.f - 10.f;
	dp.unpackU8(wind, "wind");			mWindSensitivity = ((F32)wind)/10.f;
	if (dp.hasNext())
	{
		dp.unpackVector3(mUserForce, "userforce");
	}
	else
	{
		mUserForce.setVec(0.f, 0.f, 0.f);
	}
	return TRUE;
}

bool LLFlexibleObjectData::operator==(const LLNetworkData& data) const
{
	if (data.mType != PARAMS_FLEXIBLE)
	{
		return false;
	}
	LLFlexibleObjectData *flex_data = (LLFlexibleObjectData*)&data;
	return (mSimulateLOD == flex_data->mSimulateLOD &&
			mGravity == flex_data->mGravity &&
			mAirFriction == flex_data->mAirFriction &&
			mWindSensitivity == flex_data->mWindSensitivity &&
			mTension == flex_data->mTension &&
			mUserForce == flex_data->mUserForce);
			//mUsingCollisionSphere == flex_data->mUsingCollisionSphere &&
			//mRenderingCollisionSphere == flex_data->mRenderingCollisionSphere
}

void LLFlexibleObjectData::copy(const LLNetworkData& data)
{
	const LLFlexibleObjectData *flex_data = (LLFlexibleObjectData*)&data;
	mSimulateLOD = flex_data->mSimulateLOD;
	mGravity = flex_data->mGravity;
	mAirFriction = flex_data->mAirFriction;
	mWindSensitivity = flex_data->mWindSensitivity;
	mTension = flex_data->mTension;
	mUserForce = flex_data->mUserForce;
	//mUsingCollisionSphere = flex_data->mUsingCollisionSphere;
	//mRenderingCollisionSphere = flex_data->mRenderingCollisionSphere;
}

LLSD LLFlexibleObjectData::asLLSD() const
{
	LLSD sd;

	sd["air_friction"] = getAirFriction();
	sd["gravity"] = getGravity();
	sd["simulate_lod"] = getSimulateLOD();
	sd["tension"] = getTension();
	sd["user_force"] = getUserForce().getValue();
	sd["wind_sensitivity"] = getWindSensitivity();
	
	return sd;
}

bool LLFlexibleObjectData::fromLLSD(LLSD& sd)
{
	const char *w;
	w = "air_friction";
	if (sd.has(w))
	{
		setAirFriction( (F32)sd[w].asReal() );
	} else goto fail;
	w = "gravity";
	if (sd.has(w))
	{
		setGravity( (F32)sd[w].asReal() );
	} else goto fail;
	w = "simulate_lod";
	if (sd.has(w))
	{
		setSimulateLOD( sd[w].asInteger() );
	} else goto fail;
	w = "tension";
	if (sd.has(w))
	{
		setTension( (F32)sd[w].asReal() );
	} else goto fail;
	w = "user_force";
	if (sd.has(w))
	{
		LLVector3 user_force = ll_vector3_from_sd(sd[w], 0);
		setUserForce( user_force );
	} else goto fail;
	w = "wind_sensitivity";
	if (sd.has(w))
	{
		setWindSensitivity( (F32)sd[w].asReal() );
	} else goto fail;
	
	return true;
 fail:
	return false;
}

//============================================================================

LLSculptParams::LLSculptParams()
{
	mType = PARAMS_SCULPT;
	mSculptTexture.set(SCULPT_DEFAULT_TEXTURE);
	mSculptType = LL_SCULPT_TYPE_SPHERE;
}

BOOL LLSculptParams::pack(LLDataPacker &dp) const
{
	dp.packUUID(mSculptTexture, "texture");
	dp.packU8(mSculptType, "type");
	
	return TRUE;
}

BOOL LLSculptParams::unpack(LLDataPacker &dp)
{
	U8 type;
	LLUUID id;
	dp.unpackUUID(id, "texture");
	dp.unpackU8(type, "type");

	setSculptTexture(id, type);
	return TRUE;
}

bool LLSculptParams::operator==(const LLNetworkData& data) const
{
	if (data.mType != PARAMS_SCULPT)
	{
		return false;
	}
	
	const LLSculptParams *param = (const LLSculptParams*)&data;
	if ( (param->mSculptTexture != mSculptTexture) ||
		 (param->mSculptType != mSculptType) )
		 
	{
		return false;
	}
	
	return true;
}

void LLSculptParams::copy(const LLNetworkData& data)
{
	const LLSculptParams *param = (LLSculptParams*)&data;
	setSculptTexture(param->mSculptTexture, param->mSculptType);
}



LLSD LLSculptParams::asLLSD() const
{
	LLSD sd;
	
	sd["texture"] = mSculptTexture;
	sd["type"] = mSculptType;
		
	return sd;
}

bool LLSculptParams::fromLLSD(LLSD& sd)
{
	const char *w;
	U8 type;
	w = "type";
	if (sd.has(w))
	{
		type = sd[w].asInteger();
	}
	else return false;

	w = "texture";
	if (sd.has(w))
	{
		setSculptTexture(sd[w], type);
	}
	else return false;

	return true;
}

void LLSculptParams::setSculptTexture(const LLUUID& texture_id, U8 sculpt_type)
{
	U8 type = sculpt_type & LL_SCULPT_TYPE_MASK;
	U8 flags = sculpt_type & LL_SCULPT_FLAG_MASK;
	if (sculpt_type != (type | flags) || type > LL_SCULPT_TYPE_MAX)
	{
		mSculptTexture.set(SCULPT_DEFAULT_TEXTURE);
		mSculptType = LL_SCULPT_TYPE_SPHERE;
	}
	else
	{
		mSculptTexture = texture_id;
		mSculptType = sculpt_type;
	}
}

//============================================================================

LLLightImageParams::LLLightImageParams()
{
	mType = PARAMS_LIGHT_IMAGE;
	mParams.setVec(F_PI*0.5f, 0.f, 0.f);
}

BOOL LLLightImageParams::pack(LLDataPacker &dp) const
{
	dp.packUUID(mLightTexture, "texture");
	dp.packVector3(mParams, "params");

	return TRUE;
}

BOOL LLLightImageParams::unpack(LLDataPacker &dp)
{
	dp.unpackUUID(mLightTexture, "texture");
	dp.unpackVector3(mParams, "params");
	
	return TRUE;
}

bool LLLightImageParams::operator==(const LLNetworkData& data) const
{
	if (data.mType != PARAMS_LIGHT_IMAGE)
	{
		return false;
	}
	
	const LLLightImageParams *param = (const LLLightImageParams*)&data;
	if ( (param->mLightTexture != mLightTexture) )
	{
		return false;
	}

	if ( (param->mParams != mParams ) )
	{
		return false;
	}
	
	return true;
}

void LLLightImageParams::copy(const LLNetworkData& data)
{
	const LLLightImageParams *param = (LLLightImageParams*)&data;
	mLightTexture = param->mLightTexture;
	mParams = param->mParams;
}



LLSD LLLightImageParams::asLLSD() const
{
	LLSD sd;
	
	sd["texture"] = mLightTexture;
	sd["params"] = mParams.getValue();
		
	return sd;
}

bool LLLightImageParams::fromLLSD(LLSD& sd)
{
	if (sd.has("texture"))
	{
		setLightTexture( sd["texture"] );
		setParams( LLVector3( sd["params"] ) );
		return true;
	} 
	
	return false;
}

//============================================================================

LLExtendedMeshParams::LLExtendedMeshParams()
{
    mType = PARAMS_EXTENDED_MESH;
	mFlags = 0;
}

BOOL LLExtendedMeshParams::pack(LLDataPacker &dp) const
{
	dp.packU32(mFlags, "flags");

	return TRUE;
}

BOOL LLExtendedMeshParams::unpack(LLDataPacker &dp)
{
	dp.unpackU32(mFlags, "flags");
	
	return TRUE;
}

bool LLExtendedMeshParams::operator==(const LLNetworkData& data) const
{
	if (data.mType != PARAMS_EXTENDED_MESH)
	{
		return false;
	}
	
	const LLExtendedMeshParams *param = (const LLExtendedMeshParams*)&data;
	if ( (param->mFlags != mFlags) )
	{
		return false;
	}

	return true;
}

void LLExtendedMeshParams::copy(const LLNetworkData& data)
{
	const LLExtendedMeshParams *param = (LLExtendedMeshParams*)&data;
	mFlags = param->mFlags;
}

LLSD LLExtendedMeshParams::asLLSD() const
{
	LLSD sd;
	
	sd["flags"] = LLSD::Integer(mFlags);
		
	return sd;
}

bool LLExtendedMeshParams::fromLLSD(LLSD& sd)
{
	if (sd.has("flags"))
	{
		setFlags( sd["flags"].asInteger());
		return true;
	} 
	
	return false;
}

//============================================================================

LLRenderMaterialParams::LLRenderMaterialParams()
{
    mType = PARAMS_RENDER_MATERIAL;
}

BOOL LLRenderMaterialParams::pack(LLDataPacker &dp) const
{
    return dp.packUUID(mMaterial, "material");

//    return TRUE;
}

BOOL LLRenderMaterialParams::unpack(LLDataPacker &dp)
{
    return dp.unpackUUID(mMaterial, "material");

//    return TRUE;
}

bool LLRenderMaterialParams::operator==(const LLNetworkData& data) const
{
    if (data.mType != PARAMS_RENDER_MATERIAL)
    {
        return false;
    }

    const LLRenderMaterialParams &param = static_cast<const LLRenderMaterialParams&>(data);

    return param.mMaterial == mMaterial;
}

void LLRenderMaterialParams::copy(const LLNetworkData& data)
{
    llassert_always(data.mType == PARAMS_RENDER_MATERIAL);
    const LLRenderMaterialParams &param = static_cast<const LLRenderMaterialParams&>(data);
    mMaterial = param.mMaterial;
}

LLSD LLRenderMaterialParams::asLLSD() const
{
    return llsd::map("material", mMaterial);
}

bool LLRenderMaterialParams::fromLLSD(LLSD& sd)
{
    if (sd.has("material"))
    {
        setMaterial(sd["material"]);
        return true;
    }

    return false;
}

void LLRenderMaterialParams::setMaterial(const LLUUID & id)
{
    mMaterial = id;
}

LLUUID LLRenderMaterialParams::getMaterial() const
{
    return mMaterial;
}