summaryrefslogtreecommitdiff
path: root/indra/newview/installers/windows
diff options
context:
space:
mode:
Diffstat (limited to 'indra/newview/installers/windows')
-rw-r--r--indra/newview/installers/windows/installer_template.nsi1804
1 files changed, 902 insertions, 902 deletions
diff --git a/indra/newview/installers/windows/installer_template.nsi b/indra/newview/installers/windows/installer_template.nsi
index 6bcce93704..ed37f541c8 100644
--- a/indra/newview/installers/windows/installer_template.nsi
+++ b/indra/newview/installers/windows/installer_template.nsi
@@ -1,902 +1,902 @@
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Second Life setup.nsi
-;; Copyright 2004-2015, Linden Research, Inc.
-;;
-;; This library is free software; you can redistribute it and/or
-;; modify it under the terms of the GNU Lesser General Public
-;; License as published by the Free Software Foundation;
-;; version 2.1 of the License only.
-;;
-;; This library is distributed in the hope that it will be useful,
-;; but WITHOUT ANY WARRANTY; without even the implied warranty of
-;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-;; Lesser General Public License for more details.
-;;
-;; You should have received a copy of the GNU Lesser General Public
-;; License along with this library; if not, write to the Free Software
-;; Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-;;
-;; Linden Research, Inc., 945 Battery Street, San Francisco, CA 94111 USA
-;;
-;; NSIS 3 or higher required for Unicode support
-;;
-;; Author: James Cook, TankMaster Finesmith, Don Kjer, Callum Prentice
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Compiler flags
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Unicode true
-SetOverwrite on # Overwrite files
-SetCompress auto # Compress if saves space
-SetCompressor /solid lzma # Compress whole installer as one block
-SetDatablockOptimize off # Only saves us 0.1%, not worth it
-XPStyle on # Add an XP manifest to the installer
-RequestExecutionLevel admin # For when we write to Program Files
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Project flags
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-# This placeholder is replaced by viewer_manifest.py
-%%VERSION%%
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; - language files - one for each language (or flavor thereof)
-;; (these files are in the same place as the nsi template but the python script generates a new nsi file in the
-;; application directory so we have to add a path to these include files)
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Ansariel notes: "Under certain circumstances the installer will fall back
-;; to the first defined (aka default) language version. So you want to include
-;; en-us as first language file."
-!include "%%SOURCE%%\installers\windows\lang_en-us.nsi"
-
-# Danish and Polish no longer supported by the viewer itself
-##!include "%%SOURCE%%\installers\windows\lang_da.nsi"
-!include "%%SOURCE%%\installers\windows\lang_de.nsi"
-!include "%%SOURCE%%\installers\windows\lang_es.nsi"
-!include "%%SOURCE%%\installers\windows\lang_fr.nsi"
-!include "%%SOURCE%%\installers\windows\lang_ja.nsi"
-!include "%%SOURCE%%\installers\windows\lang_it.nsi"
-##!include "%%SOURCE%%\installers\windows\lang_pl.nsi"
-!include "%%SOURCE%%\installers\windows\lang_pt-br.nsi"
-!include "%%SOURCE%%\installers\windows\lang_ru.nsi"
-!include "%%SOURCE%%\installers\windows\lang_tr.nsi"
-!include "%%SOURCE%%\installers\windows\lang_zh.nsi"
-
-# *TODO: Move these into the language files themselves
-##LangString LanguageCode ${LANG_DANISH} "da"
-LangString LanguageCode ${LANG_GERMAN} "de"
-LangString LanguageCode ${LANG_ENGLISH} "en"
-LangString LanguageCode ${LANG_SPANISH} "es"
-LangString LanguageCode ${LANG_FRENCH} "fr"
-LangString LanguageCode ${LANG_JAPANESE} "ja"
-LangString LanguageCode ${LANG_ITALIAN} "it"
-##LangString LanguageCode ${LANG_POLISH} "pl"
-LangString LanguageCode ${LANG_PORTUGUESEBR} "pt"
-LangString LanguageCode ${LANG_RUSSIAN} "ru"
-LangString LanguageCode ${LANG_TURKISH} "tr"
-LangString LanguageCode ${LANG_TRADCHINESE} "zh"
-
-# This placeholder is replaced by viewer_manifest.py
-%%INST_VARS%%
-
-Name ${INSTNAME}
-
-SubCaption 0 $(LicenseSubTitleSetup) # Override "license agreement" text
-
-!define MUI_ICON "%%SOURCE%%\installers\windows\install_icon.ico"
-!define MUI_UNICON "%%SOURCE%%\installers\windows\uninstall_icon.ico"
-
-BrandingText " " # Bottom of window text
-Icon "${MUI_ICON}"
-UninstallIcon "${MUI_UNICON}"
-WindowIcon on # Show our icon in left corner
-BGGradient off # No big background window
-CRCCheck on # Make sure CRC is OK
-InstProgressFlags smooth colored # New colored smooth look
-SetOverwrite on # Overwrite files by default
-AutoCloseWindow true # After all files install, close window
-
-# Registry key paths, ours and Microsoft's
-!define LINDEN_KEY "SOFTWARE\Linden Research, Inc."
-!define INSTNAME_KEY "${LINDEN_KEY}\${INSTNAME}"
-!define MSCURRVER_KEY "SOFTWARE\Microsoft\Windows\CurrentVersion"
-!define MSNTCURRVER_KEY "SOFTWARE\Microsoft\Windows NT\CurrentVersion"
-!define MSUNINSTALL_KEY "${MSCURRVER_KEY}\Uninstall\${INSTNAME}"
-
-# from http://nsis.sourceforge.net/Docs/MultiUser/Readme.html
-### Highest level permitted for user: Admin for Admin, Standard for Standard
-##!define MULTIUSER_EXECUTIONLEVEL Highest
-!define MULTIUSER_EXECUTIONLEVEL Admin
-!define MULTIUSER_MUI
-### Look for /AllUsers or /CurrentUser switches
-##!define MULTIUSER_INSTALLMODE_COMMANDLINE
-# appended to $PROGRAMFILES, as affected by MULTIUSER_USE_PROGRAMFILES64
-!define MULTIUSER_INSTALLMODE_INSTDIR "${INSTNAME}"
-# expands to !define MULTIUSER_USE_PROGRAMFILES64 or nothing
-%%PROGRAMFILES%%
-# should make MultiUser.nsh initialization read existing INSTDIR from registry
-## SL-10506: don't
-##!define MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_KEY "${INSTNAME_KEY}"
-##!define MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_VALUENAME ""
-# Don't set MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_KEY and
-# MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_VALUENAME to cause the installer to
-# write $MultiUser.InstallMode to the registry, because when the user installs
-# multiple viewers with the same channel (same ${INSTNAME}, hence same
-# ${INSTNAME_KEY}), the registry entry is overwritten. Instead we'll write a
-# little file into the install directory -- see .onInstSuccess and un.onInit.
-!include MultiUser.nsh
-!include MUI2.nsh
-!define MUI_BGCOLOR FFFFFF
-!insertmacro MUI_FUNCTION_GUIINIT
-
-UninstallText $(UninstallTextMsg)
-DirText $(DirectoryChooseTitle) $(DirectoryChooseSetup)
-##!insertmacro MULTIUSER_PAGE_INSTALLMODE
-!define MUI_PAGE_CUSTOMFUNCTION_PRE dirPre
-!insertmacro MUI_PAGE_DIRECTORY
-!insertmacro MUI_PAGE_INSTFILES
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Variables
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Var INSTNAME
-Var INSTEXE
-Var VIEWER_EXE
-Var INSTSHORTCUT
-Var COMMANDLINE # Command line passed to this installer, set in .onInit
-Var SHORTCUT_LANG_PARAM # "--set InstallLanguage de", Passes language to viewer
-Var SKIP_DIALOGS # Set from command line in .onInit. autoinstall GUI and the defaults.
-Var SKIP_AUTORUN # Skip automatic launch of the viewer after install
-Var DO_UNINSTALL_V2 # If non-null, path to a previous Viewer 2 installation that will be uninstalled.
-
-# Function definitions should go before file includes, because calls to
-# DLLs like LangDLL trigger an implicit file include, so if that call is at
-# the end of this script NSIS has to decompress the whole installer before
-# it can call the DLL function. JC
-
-!include "FileFunc.nsh" # For GetParameters, GetOptions
-!insertmacro GetParameters
-!insertmacro GetOptions
-!include WinVer.nsh # For OS and SP detection
-!include 'LogicLib.nsh' # for value comparison
-!include "x64.nsh" # for 64bit detection
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Pre-directory page callback
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function dirPre
- StrCmp $SKIP_DIALOGS "true" 0 +2
- Abort
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Prep Installer Section
-;;
-;; Note: to add new languages, add a language file include to the list
-;; at the top of this file, add an entry to the menu and then add an
-;; entry to the language ID selector below
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function .onInit
-!insertmacro MULTIUSER_INIT
-
-%%ENGAGEREGISTRY%%
-
-# SL-10506: Setting MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_KEY and
-# MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_VALUENAME should
-# read the current location of the install for this version into INSTDIR.
-# However, SL-10506 complains about the resulting behavior, so the logic below
-# is adapted from before we introduced MultiUser.nsh.
-
-# if $0 is empty, this is the first time for this viewer name
-ReadRegStr $0 SHELL_CONTEXT "${INSTNAME_KEY}" ""
-
-# viewer with this name was installed before
-${If} $0 != ""
- # use the value we got from registry as install location
- StrCpy $INSTDIR $0
-${EndIf}
-
-Call CheckCPUFlags # Make sure we have SSE2 support
-Call CheckWindowsVersion # Don't install On unsupported systems
- Push $0
- ${GetParameters} $COMMANDLINE # Get our command line
-
- ${GetOptions} $COMMANDLINE "/SKIP_DIALOGS" $0
- IfErrors +2 0 # If error jump past setting SKIP_DIALOGS
- StrCpy $SKIP_DIALOGS "true"
-
- ${GetOptions} $COMMANDLINE "/SKIP_AUTORUN" $0
- IfErrors +2 0 ; If error jump past setting SKIP_AUTORUN
- StrCpy $SKIP_AUTORUN "true"
-
- ${GetOptions} $COMMANDLINE "/LANGID=" $0 # /LANGID=1033 implies US English
-
-# If no language (error), then proceed
- IfErrors lbl_configure_default_lang
-# No error means we got a language, so use it
- StrCpy $LANGUAGE $0
- Goto lbl_return
-
-lbl_configure_default_lang:
-# If we currently have a version of SL installed, default to the language of that install
-# Otherwise don't change $LANGUAGE and it will default to the OS UI language.
- ReadRegStr $0 SHELL_CONTEXT "${INSTNAME_KEY}" "InstallerLanguage"
- IfErrors +2 0 # If error skip the copy instruction
- StrCpy $LANGUAGE $0
-
-# For silent installs, no language prompt, use default
- IfSilent 0 +3
- StrCpy $SKIP_AUTORUN "true"
- Goto lbl_return
- StrCmp $SKIP_DIALOGS "true" lbl_return
-
- Push ""
-# Use separate file so labels can be UTF-16 but we can still merge changes into this ASCII file. JC
- !include "%%SOURCE%%\installers\windows\language_menu.nsi"
-
- Push A # A means auto count languages for the auto count to work the first empty push (Push "") must remain
- LangDLL::LangDialog $(InstallerLanguageTitle) $(SelectInstallerLanguage)
- Pop $0
- StrCmp $0 "cancel" 0 +2
- Abort
- StrCpy $LANGUAGE $0
-
-# Save language in registry
- WriteRegStr SHELL_CONTEXT "${INSTNAME_KEY}" "InstallerLanguage" $LANGUAGE
-lbl_return:
- Pop $0
- Return
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Prep Uninstaller Section
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function un.onInit
- # Save $INSTDIR -- it appears to have the correct value before
- # MULTIUSER_UNINIT, but then gets munged by MULTIUSER_UNINIT?!
- Push $INSTDIR
- !insertmacro MULTIUSER_UNINIT
- Pop $INSTDIR
-
- # Now read InstallMode.txt from $INSTDIR
- Push $0
- ClearErrors
- FileOpen $0 "$INSTDIR\InstallMode.txt" r
- IfErrors skipread
- FileRead $0 $MultiUser.InstallMode
- FileClose $0
-skipread:
- Pop $0
-
-%%ENGAGEREGISTRY%%
-
-# Read language from registry and set for uninstaller. Key will be removed on successful uninstall
- ReadRegStr $0 SHELL_CONTEXT "${INSTNAME_KEY}" "InstallerLanguage"
- IfErrors lbl_end
- StrCpy $LANGUAGE $0
-lbl_end:
-
-## MessageBox MB_OK "After restoring:$\n$$INSTDIR = '$INSTDIR'$\n$$MultiUser.InstallMode = '$MultiUser.InstallMode'$\n$$LANGUAGE = '$LANGUAGE'"
-
- Return
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Checks for CPU valid (must have SSE2 support)
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function CheckCPUFlags
- Push $1
- System::Call 'kernel32::IsProcessorFeaturePresent(i) i(10) .r1'
- IntCmp $1 1 OK_SSE2
- MessageBox MB_OKCANCEL $(MissingSSE2) /SD IDOK IDOK OK_SSE2
- Quit
-
- OK_SSE2:
- Pop $1
- Return
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Make sure this computer meets the minimum system requirements.
-;; Currently: Windows Vista SP2
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function CheckWindowsVersion
- ${If} ${AtMostWin2003}
- MessageBox MB_OK $(CheckWindowsVersionMB)
- Quit
- ${EndIf}
-
- ${If} ${IsWinVista}
- ${AndIfNot} ${IsServicePack} 2
- MessageBox MB_OK $(CheckWindowsVersionMB)
- Quit
- ${EndIf}
-
- ${If} ${IsWin2008}
- ${AndIfNot} ${IsServicePack} 2
- MessageBox MB_OK $(CheckWindowsVersionMB)
- Quit
- ${EndIf}
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Install Section
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Section ""
-
-# SetShellVarContext is set by MultiUser.nsh initialization.
-
-# Start with some default values.
-StrCpy $INSTNAME "${INSTNAME}"
-StrCpy $INSTEXE "${INSTEXE}"
-StrCpy $VIEWER_EXE "${VIEWER_EXE}"
-StrCpy $INSTSHORTCUT "${SHORTCUT}"
-
-Call CheckIfAdministrator # Make sure the user can install/uninstall
-Call CloseSecondLife # Make sure Second Life not currently running
-Call CheckWillUninstallV2 # Check if Second Life is already installed
-
-StrCmp $DO_UNINSTALL_V2 "" PRESERVE_DONE
-PRESERVE_DONE:
-
-# Viewer had "SLLauncher" for some time and we was seting "IsHostApp" for viewer, make sure to clean it up
-DeleteRegValue HKEY_CLASSES_ROOT "Applications\$VIEWER_EXE" "IsHostApp"
-DeleteRegValue HKEY_CLASSES_ROOT "Applications\$VIEWER_EXE" "NoStartPage"
-ClearErrors
-
-INSTALL_FILES_START:
-
-Call RemoveProgFilesOnInst # Remove existing files to prevent certain errors when running the new version of the viewer
-
-# This placeholder is replaced by the complete list of all the files in the installer, by viewer_manifest.py
-%%INSTALL_FILES%%
-
-IfErrors 0 INSTALL_FILES_DONE
- StrCmp $SKIP_DIALOGS "true" INSTALL_FILES_DONE
- MessageBox MB_ABORTRETRYIGNORE $(ErrorSecondLifeInstallRetry) IDABORT INSTALL_FILES_CANCEL IDRETRY INSTALL_FILES_START
- # MB_ABORTRETRYIGNORE does not accept IDIGNORE
- Goto INSTALL_FILES_DONE
-
-INSTALL_FILES_CANCEL:
- # We are quiting, cleanup.
- # Silence warnings from RemoveProgFilesOnInst.
- StrCpy $SKIP_DIALOGS "true"
- Call RemoveProgFilesOnInst
- MessageBox MB_OK $(ErrorSecondLifeInstallSupport)
- Quit
-
-INSTALL_FILES_DONE:
-
-# Pass the installer's language to the client to use as a default
-StrCpy $SHORTCUT_LANG_PARAM "--set InstallLanguage $(LanguageCode)"
-
-# Shortcuts in start menu
-CreateDirectory "$SMPROGRAMS\$INSTSHORTCUT"
-SetOutPath "$INSTDIR"
-CreateShortCut "$SMPROGRAMS\$INSTSHORTCUT\$INSTSHORTCUT.lnk" \
- "$INSTDIR\$VIEWER_EXE" "$SHORTCUT_LANG_PARAM" "$INSTDIR\$VIEWER_EXE"
-
-
-WriteINIStr "$SMPROGRAMS\$INSTSHORTCUT\SL Create Account.url" \
- "InternetShortcut" "URL" \
- "http://join.secondlife.com/"
-WriteINIStr "$SMPROGRAMS\$INSTSHORTCUT\SL Your Account.url" \
- "InternetShortcut" "URL" \
- "http://www.secondlife.com/account/"
-WriteINIStr "$SMPROGRAMS\$INSTSHORTCUT\SL Scripting Language Help.url" \
- "InternetShortcut" "URL" \
- "http://wiki.secondlife.com/wiki/LSL_Portal"
-CreateShortCut "$SMPROGRAMS\$INSTSHORTCUT\Uninstall $INSTSHORTCUT.lnk" \
- '"$INSTDIR\uninst.exe"' ''
-
-# Other shortcuts
-SetOutPath "$INSTDIR"
-CreateShortCut "$DESKTOP\$INSTSHORTCUT.lnk" \
- "$INSTDIR\$VIEWER_EXE" "$SHORTCUT_LANG_PARAM" "$INSTDIR\$VIEWER_EXE"
-CreateShortCut "$INSTDIR\$INSTSHORTCUT.lnk" \
- "$INSTDIR\$VIEWER_EXE" "$SHORTCUT_LANG_PARAM" "$INSTDIR\$VIEWER_EXE"
-CreateShortCut "$INSTDIR\Uninstall $INSTSHORTCUT.lnk" \
- '"$INSTDIR\uninst.exe"' ''
-
-# Write registry
-WriteRegStr SHELL_CONTEXT "${INSTNAME_KEY}" "" "$INSTDIR"
-WriteRegStr SHELL_CONTEXT "${INSTNAME_KEY}" "Version" "${VERSION_LONG}"
-WriteRegStr SHELL_CONTEXT "${INSTNAME_KEY}" "Shortcut" "$INSTSHORTCUT"
-WriteRegStr SHELL_CONTEXT "${INSTNAME_KEY}" "Exe" "$VIEWER_EXE"
-WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "Publisher" "Linden Research, Inc."
-WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "URLInfoAbout" "http://secondlife.com/whatis/"
-WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "URLUpdateInfo" "http://secondlife.com/support/downloads/"
-WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "HelpLink" "https://support.secondlife.com/contact-support/"
-WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "DisplayName" "$INSTNAME"
-WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "UninstallString" '"$INSTDIR\uninst.exe"'
-WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "DisplayVersion" "${VERSION_LONG}"
-WriteRegDWORD SHELL_CONTEXT "${MSUNINSTALL_KEY}" "EstimatedSize" "0x0001D500" # ~117 MB
-
-# from FS:Ansariel
-WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "DisplayIcon" '"$INSTDIR\$VIEWER_EXE"'
-
-# BUG-2707 Disable SEHOP for installed viewer.
-WriteRegDWORD SHELL_CONTEXT "${MSNTCURRVER_KEY}\Image File Execution Options\$VIEWER_EXE" "DisableExceptionChainValidation" 1
-
-# Write URL registry info
-WriteRegStr HKEY_CLASSES_ROOT "${URLNAME}" "(default)" "URL:Second Life"
-WriteRegStr HKEY_CLASSES_ROOT "${URLNAME}" "URL Protocol" ""
-WriteRegStr HKEY_CLASSES_ROOT "${URLNAME}\DefaultIcon" "" '"$INSTDIR\$VIEWER_EXE"'
-
-# URL param must be last item passed to viewer, it ignores subsequent params to avoid parameter injection attacks.
-# MAINT-8305: On SLURL click, directly invoke the viewer, not the launcher.
-WriteRegExpandStr HKEY_CLASSES_ROOT "${URLNAME}\shell\open\command" "" '"$INSTDIR\$VIEWER_EXE" -url "%1"'
-WriteRegStr HKEY_CLASSES_ROOT "x-grid-location-info" "(default)" "URL:Second Life"
-WriteRegStr HKEY_CLASSES_ROOT "x-grid-location-info" "URL Protocol" ""
-WriteRegStr HKEY_CLASSES_ROOT "x-grid-location-info\DefaultIcon" "" '"$INSTDIR\$VIEWER_EXE"'
-
-# URL param must be last item passed to viewer, it ignores subsequent params to avoid parameter injection attacks.
-WriteRegExpandStr HKEY_CLASSES_ROOT "x-grid-location-info\shell\open\command" "" '"$INSTDIR\$VIEWER_EXE" -url "%1"'
-
-WriteRegStr HKEY_CLASSES_ROOT "Applications\$INSTEXE" "IsHostApp" ""
-##WriteRegStr HKEY_CLASSES_ROOT "Applications\${VIEWER_EXE}" "NoStartPage" ""
-
-# Write out uninstaller
-WriteUninstaller "$INSTDIR\uninst.exe"
-
-# Uninstall existing "Second Life Viewer 2" install if needed.
-StrCmp $DO_UNINSTALL_V2 "" REMOVE_SLV2_DONE
- ExecWait '"$PROGRAMFILES\SecondLifeViewer2\uninst.exe" /S _?=$PROGRAMFILES\SecondLifeViewer2'
- Delete "$PROGRAMFILES\SecondLifeViewer2\uninst.exe" # With _? option above, uninst.exe will be left behind.
- RMDir "$PROGRAMFILES\SecondLifeViewer2" # Will remove only if empty.
-
-REMOVE_SLV2_DONE:
-
-SectionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Uninstall Section
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Section Uninstall
-
-# Start with some default values.
-StrCpy $INSTNAME "${INSTNAME}"
-StrCpy $INSTEXE "${INSTEXE}"
-StrCpy $VIEWER_EXE "${VIEWER_EXE}"
-StrCpy $INSTSHORTCUT "${SHORTCUT}"
-
-# SetShellVarContext per the mode saved at install time in registry at
-# MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_KEY
-# MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_VALUENAME
-# Couldn't get NSIS to expand $MultiUser.InstallMode into the function name at Call time
-${If} $MultiUser.InstallMode == 'AllUsers'
-##MessageBox MB_OK "Uninstalling for all users"
- Call un.MultiUser.InstallMode.AllUsers
-${Else}
-##MessageBox MB_OK "Uninstalling for current user"
- Call un.MultiUser.InstallMode.CurrentUser
-${EndIf}
-
-# Make sure we're not running
-Call un.CloseSecondLife
-
-# Clean up registry keys and subkeys (these should all be !defines somewhere)
-DeleteRegKey SHELL_CONTEXT "${INSTNAME_KEY}"
-DeleteRegKey SHELL_CONTEXT "${MSCURRVER_KEY}\Uninstall\$INSTNAME"
-# BUG-2707 Remove entry that disabled SEHOP
-DeleteRegKey SHELL_CONTEXT "${MSNTCURRVER_KEY}\Image File Execution Options\$VIEWER_EXE"
-DeleteRegKey HKEY_CLASSES_ROOT "Applications\$INSTEXE"
-DeleteRegKey HKEY_CLASSES_ROOT "Applications\${VIEWER_EXE}"
-
-# Clean up shortcuts
-Delete "$SMPROGRAMS\$INSTSHORTCUT\*.*"
-RMDir "$SMPROGRAMS\$INSTSHORTCUT"
-
-Delete "$DESKTOP\$INSTSHORTCUT.lnk"
-Delete "$INSTDIR\$INSTSHORTCUT.lnk"
-Delete "$INSTDIR\Uninstall $INSTSHORTCUT.lnk"
-
-# Remove the main installation directory
-Call un.ProgramFiles
-
-# Clean up cache and log files, but leave them in-place for non AGNI installs.
-Call un.UserSettingsFiles
-
-SectionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Make sure the user can install/uninstall
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function CheckIfAdministrator
- DetailPrint $(CheckAdministratorInstDP)
- UserInfo::GetAccountType
- Pop $R0
- StrCmp $R0 "Admin" lbl_is_admin
- MessageBox MB_OK $(CheckAdministratorInstMB)
- Quit
-lbl_is_admin:
- Return
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Function CheckWillUninstallV2
-;;
-;; If called through auto-update, need to uninstall any existing V2 installation.
-;; Don't want to end up with SecondLifeViewer2 and SecondLifeViewer installations
-;; existing side by side with no indication on which to use.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function CheckWillUninstallV2
-
- StrCpy $DO_UNINSTALL_V2 ""
-
- StrCmp $SKIP_DIALOGS "true" 0 CHECKV2_DONE
- StrCmp $INSTDIR "$PROGRAMFILES\SecondLifeViewer2" CHECKV2_DONE # Don't uninstall our own install dir.
- IfFileExists "$PROGRAMFILES\SecondLifeViewer2\uninst.exe" CHECKV2_FOUND CHECKV2_DONE
-
-CHECKV2_FOUND:
- StrCpy $DO_UNINSTALL_V2 "true"
-
-CHECKV2_DONE:
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Close the program, if running. Modifies no variables.
-;; Allows user to bail out of install process.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function CloseSecondLife
- Push $0
- FindWindow $0 "Second Life" ""
- IntCmp $0 0 DONE
-
- StrCmp $SKIP_DIALOGS "true" CLOSE
- MessageBox MB_OKCANCEL $(CloseSecondLifeInstMB) IDOK CLOSE IDCANCEL CANCEL_INSTALL
-
- CANCEL_INSTALL:
- Quit
-
- CLOSE:
- DetailPrint $(CloseSecondLifeInstDP)
- SendMessage $0 16 0 0
-
- LOOP:
- FindWindow $0 "Second Life" ""
- IntCmp $0 0 SLEEP
- Sleep 500
- Goto LOOP
-
- SLEEP:
- # Second life window just closed, but program might not be fully done yet
- # and OS might have not released some locks, wait a bit more to make sure
- # all file handles were released.
- # If something still isn't unlocked, it will trigger a notification from
- # RemoveProgFilesOnInst
- Sleep 1000
- DONE:
- Pop $0
- Return
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Close the program, if running. Modifies no variables.
-;; Allows user to bail out of uninstall process.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function un.CloseSecondLife
- Push $0
- FindWindow $0 "Second Life" ""
- IntCmp $0 0 DONE
- MessageBox MB_OKCANCEL $(CloseSecondLifeUnInstMB) IDOK CLOSE IDCANCEL CANCEL_UNINSTALL
-
- CANCEL_UNINSTALL:
- Quit
-
- CLOSE:
- DetailPrint $(CloseSecondLifeUnInstDP)
- SendMessage $0 16 0 0
-
- LOOP:
- FindWindow $0 "Second Life" ""
- IntCmp $0 0 DONE
- Sleep 500
- Goto LOOP
-
- DONE:
- Pop $0
- Return
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Delete files on install if previous install exists to prevent undesired behavior
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function RemoveProgFilesOnInst
-
-# We do not remove whole pervious install folder on install, since
-# there is a chance that viewer was installed into some important
-# folder by intent or accident
-# RMDir /r $INSTDIR is especially unsafe if user installed somewhere
-# like Program Files
-
-# Set retry counter. All integers are strings.
-Push $0
-StrCpy $0 0
-
-ClearErrors
-
-PREINSTALL_REMOVE:
-
-# Remove old SecondLife.exe to invalidate any old shortcuts to it that may be in non-standard locations. See MAINT-3575
-Delete "$INSTDIR\$INSTEXE"
-Delete "$INSTDIR\$VIEWER_EXE"
-
-# Remove old shader files first so fallbacks will work. See DEV-5663
-RMDir /r "$INSTDIR\app_settings\shaders"
-
-# Remove folders to clean up files removed during development
-RMDir /r "$INSTDIR\app_settings"
-RMDir /r "$INSTDIR\skins"
-RMDir /r "$INSTDIR\vmp_icons"
-
-# Remove llplugin, plugins can crash or malfunction if they
-# find modules from different versions
-RMDir /r "$INSTDIR\llplugin"
-
-IntOp $0 $0 + 1
-
-IfErrors 0 PREINSTALL_DONE
- IntCmp $0 1 PREINSTALL_REMOVE #try again once
- StrCmp $SKIP_DIALOGS "true" PREINSTALL_DONE
- MessageBox MB_ABORTRETRYIGNORE $(CloseSecondLifeInstRM) IDABORT PREINSTALL_FAIL IDRETRY PREINSTALL_REMOVE
- # MB_ABORTRETRYIGNORE does not accept IDIGNORE
- Goto PREINSTALL_DONE
-
-PREINSTALL_FAIL:
- Quit
-
-PREINSTALL_DONE:
-
-# We are no longer including release notes with the viewer, so remove them.
-Delete "$SMPROGRAMS\$INSTSHORTCUT\SL Release Notes.lnk"
-Delete "$INSTDIR\releasenotes.txt"
-
-Pop $0
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Delete files in \Users\<User>\AppData\
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function un.UserSettingsFiles
-
-StrCmp $DO_UNINSTALL_V2 "true" Keep # Don't remove user's settings files on auto upgrade
-
-# Ask if user wants to keep data files or not
-MessageBox MB_YESNO|MB_ICONQUESTION $(RemoveDataFilesMB) IDYES Remove IDNO Keep
-
-Remove:
-Push $0
-Push $1
-Push $2
-
- DetailPrint "Deleting Second Life data files"
-
- StrCpy $0 0 # Index number used to iterate via EnumRegKey
-
- LOOP:
- EnumRegKey $1 SHELL_CONTEXT "${MSNTCURRVER_KEY}\ProfileList" $0
- StrCmp $1 "" DONE # No more users
-
- ReadRegStr $2 SHELL_CONTEXT "${MSNTCURRVER_KEY}\ProfileList\$1" "ProfileImagePath"
- StrCmp $2 "" CONTINUE 0 # "ProfileImagePath" value is missing
-
-# Required since ProfileImagePath is of type REG_EXPAND_SZ
- ExpandEnvStrings $2 $2
-
-# Delete files in \Users\<User>\AppData\Roaming\SecondLife
-# Remove all settings files but leave any other .txt files to preserve the chat logs
-; RMDir /r "$2\AppData\Roaming\SecondLife\logs"
- RMDir /r "$2\AppData\Roaming\SecondLife\browser_profile"
- RMDir /r "$2\AppData\Roaming\SecondLife\user_settings"
- Delete "$2\AppData\Roaming\SecondLife\*.xml"
- Delete "$2\AppData\Roaming\SecondLife\*.bmp"
- Delete "$2\AppData\Roaming\SecondLife\search_history.txt"
- Delete "$2\AppData\Roaming\SecondLife\plugin_cookies.txt"
- Delete "$2\AppData\Roaming\SecondLife\typed_locations.txt"
-# Delete files in \Users\<User>\AppData\Local\SecondLife
- RmDir /r "$2\AppData\Local\SecondLife" #Delete the cache folder
-
- CONTINUE:
- IntOp $0 $0 + 1
- Goto LOOP
- DONE:
-
-Pop $2
-Pop $1
-Pop $0
-
-# Delete files in ProgramData\Secondlife
-Push $0
- ReadRegStr $0 SHELL_CONTEXT "${MSCURRVER_KEY}\Explorer\Shell Folders" "Common AppData"
- StrCmp $0 "" +2
- RMDir /r "$0\SecondLife"
-Pop $0
-
-Keep:
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Delete the installed files
-;; This deletes the uninstall executable, but it works because it is copied to temp directory before running
-;;
-;; Note: You must list all files here, because we only want to delete our files,
-;; not things users left in the program directory.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function un.ProgramFiles
-
-# This placeholder is replaced by the complete list of files to uninstall by viewer_manifest.py
-%%DELETE_FILES%%
-
-# our InstallMode.txt
-Delete "$INSTDIR\InstallMode.txt"
-
-# Optional/obsolete files. Delete won't fail if they don't exist.
-Delete "$INSTDIR\autorun.bat"
-Delete "$INSTDIR\dronesettings.ini"
-Delete "$INSTDIR\message_template.msg"
-Delete "$INSTDIR\newview.pdb"
-Delete "$INSTDIR\newview.map"
-Delete "$INSTDIR\SecondLife.pdb"
-Delete "$INSTDIR\SecondLife.map"
-Delete "$INSTDIR\comm.dat"
-Delete "$INSTDIR\*.glsl"
-Delete "$INSTDIR\motions\*.lla"
-Delete "$INSTDIR\trial\*.html"
-Delete "$INSTDIR\newview.exe"
-Delete "$INSTDIR\SecondLife.exe"
-
-# MAINT-3099 workaround - prevent these log files, if present, from causing a user alert
-Delete "$INSTDIR\VivoxVoiceService-*.log"
-
-# Remove entire help directory
-RMDir /r "$INSTDIR\help"
-
-Delete "$INSTDIR\uninst.exe"
-RMDir "$INSTDIR"
-
-IfFileExists "$INSTDIR" FOLDERFOUND NOFOLDER
-
-FOLDERFOUND:
- MessageBox MB_OK $(DeleteProgramFilesMB) /SD IDOK IDOK NOFOLDER
-
-NOFOLDER:
-
-MessageBox MB_YESNO $(DeleteRegistryKeysMB) IDYES DeleteKeys IDNO NoDelete
-
-DeleteKeys:
- DeleteRegKey SHELL_CONTEXT "SOFTWARE\Classes\x-grid-location-info"
- DeleteRegKey SHELL_CONTEXT "SOFTWARE\Classes\secondlife"
- DeleteRegKey HKEY_CLASSES_ROOT "x-grid-location-info"
- DeleteRegKey HKEY_CLASSES_ROOT "secondlife"
-
-NoDelete:
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; After install completes, launch app
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function .onInstSuccess
- Push $0
- FileOpen $0 "$INSTDIR\InstallMode.txt" w
- # No newline -- this is for our use, not for users to read.
- FileWrite $0 "$MultiUser.InstallMode"
- FileClose $0
- Pop $0
-
- Push $R0
- Push $0
- ;; MAINT-7812: Only write nsis.winstall file with /marker switch
- ${GetParameters} $R0
- ${GetOptionsS} $R0 "/marker" $0
- ;; If no /marker switch, skip to ClearErrors
- IfErrors +4 0
- ;; $EXEDIR is where we find the installer file
- ;; Put a marker file there so VMP will know we're done
- ;; and it can delete the download directory next time.
- ;; http://nsis.sourceforge.net/Write_text_to_a_file
- FileOpen $0 "$EXEDIR\nsis.winstall" w
- FileWrite $0 "NSIS done$\n"
- FileClose $0
-
- ClearErrors
- Pop $0
- Pop $R0
-
- Call CheckWindowsServPack # Warn if not on the latest SP before asking to launch.
- StrCmp $SKIP_AUTORUN "true" +2;
- # Assumes SetOutPath $INSTDIR
- # Run INSTEXE (our updater), passing VIEWER_EXE plus the command-line
- # arguments built into our shortcuts. This gives the updater a chance
- # to verify that the viewer we just installed is appropriate for the
- # running system -- or, if not, to download and install a different
- # viewer. For instance, if a user running 32-bit Windows installs a
- # 64-bit viewer, it cannot run on this system. But since the updater
- # is a 32-bit executable even in the 64-bit viewer package, the
- # updater can detect the problem and adapt accordingly.
- # Once everything is in order, the updater will run the specified
- # viewer with the specified params.
- # Quote the updater executable and the viewer executable because each
- # must be a distinct command-line token, but DO NOT quote the language
- # string because it must decompose into separate command-line tokens.
- Exec '"$INSTDIR\$INSTEXE" precheck "$INSTDIR\$VIEWER_EXE" $SHORTCUT_LANG_PARAM'
-#
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Recommend Upgrading to Service Pack 1 for Windows 7, if not present
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-Function CheckWindowsServPack
- ${If} ${IsWin7}
- ${AndIfNot} ${IsServicePack} 1
- MessageBox MB_OK $(CheckWindowsServPackMB)
- DetailPrint $(UseLatestServPackDP)
- Return
- ${EndIf}
-
- ${If} ${IsWin2008R2}
- ${AndIfNot} ${IsServicePack} 1
- MessageBox MB_OK $(CheckWindowsServPackMB)
- DetailPrint $(UseLatestServPackDP)
- Return
- ${EndIf}
-
-FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;; Clobber user files - TEST ONLY
-;; This is here for testing, DO NOT USE UNLESS YOU KNOW WHAT YOU ARE TESTING FOR!
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;Function ClobberUserFilesTESTONLY
-
-;Push $0
-;Push $1
-;Push $2
-;
-; StrCpy $0 0 # Index number used to iterate via EnumRegKey
-;
-; LOOP:
-; EnumRegKey $1 SHELL_CONTEXT "${MSNTCURRVER_KEY}\ProfileList" $0
-; StrCmp $1 "" DONE # no more users
-;
-; ReadRegStr $2 SHELL_CONTEXT "${MSNTCURRVER_KEY}\ProfileList\$1" "ProfileImagePath"
-; StrCmp $2 "" CONTINUE 0 # "ProfileImagePath" value is missing
-;
-;# Required since ProfileImagePath is of type REG_EXPAND_SZ
-; ExpandEnvStrings $2 $2
-;
-; RMDir /r "$2\Application Data\SecondLife\"
-;
-; CONTINUE:
-; IntOp $0 $0 + 1
-; Goto LOOP
-; DONE:
-;
-;Pop $2
-;Pop $1
-;Pop $0
-;
-;# Copy files in Documents and Settings\All Users\SecondLife
-;Push $0
-; ReadRegStr $0 SHELL_CONTEXT "${MSCURRVER_KEY}\Explorer\Shell Folders" "Common AppData"
-; StrCmp $0 "" +2
-; RMDir /r "$2\Application Data\SecondLife\"
-;Pop $0
-;
-;FunctionEnd
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; EOF ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Second Life setup.nsi
+;; Copyright 2004-2015, Linden Research, Inc.
+;;
+;; This library is free software; you can redistribute it and/or
+;; modify it under the terms of the GNU Lesser General Public
+;; License as published by the Free Software Foundation;
+;; version 2.1 of the License only.
+;;
+;; This library is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+;; Lesser General Public License for more details.
+;;
+;; You should have received a copy of the GNU Lesser General Public
+;; License along with this library; if not, write to the Free Software
+;; Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+;;
+;; Linden Research, Inc., 945 Battery Street, San Francisco, CA 94111 USA
+;;
+;; NSIS 3 or higher required for Unicode support
+;;
+;; Author: James Cook, TankMaster Finesmith, Don Kjer, Callum Prentice
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Compiler flags
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Unicode true
+SetOverwrite on # Overwrite files
+SetCompress auto # Compress if saves space
+SetCompressor /solid lzma # Compress whole installer as one block
+SetDatablockOptimize off # Only saves us 0.1%, not worth it
+XPStyle on # Add an XP manifest to the installer
+RequestExecutionLevel admin # For when we write to Program Files
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Project flags
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+# This placeholder is replaced by viewer_manifest.py
+%%VERSION%%
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; - language files - one for each language (or flavor thereof)
+;; (these files are in the same place as the nsi template but the python script generates a new nsi file in the
+;; application directory so we have to add a path to these include files)
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Ansariel notes: "Under certain circumstances the installer will fall back
+;; to the first defined (aka default) language version. So you want to include
+;; en-us as first language file."
+!include "%%SOURCE%%\installers\windows\lang_en-us.nsi"
+
+# Danish and Polish no longer supported by the viewer itself
+##!include "%%SOURCE%%\installers\windows\lang_da.nsi"
+!include "%%SOURCE%%\installers\windows\lang_de.nsi"
+!include "%%SOURCE%%\installers\windows\lang_es.nsi"
+!include "%%SOURCE%%\installers\windows\lang_fr.nsi"
+!include "%%SOURCE%%\installers\windows\lang_ja.nsi"
+!include "%%SOURCE%%\installers\windows\lang_it.nsi"
+##!include "%%SOURCE%%\installers\windows\lang_pl.nsi"
+!include "%%SOURCE%%\installers\windows\lang_pt-br.nsi"
+!include "%%SOURCE%%\installers\windows\lang_ru.nsi"
+!include "%%SOURCE%%\installers\windows\lang_tr.nsi"
+!include "%%SOURCE%%\installers\windows\lang_zh.nsi"
+
+# *TODO: Move these into the language files themselves
+##LangString LanguageCode ${LANG_DANISH} "da"
+LangString LanguageCode ${LANG_GERMAN} "de"
+LangString LanguageCode ${LANG_ENGLISH} "en"
+LangString LanguageCode ${LANG_SPANISH} "es"
+LangString LanguageCode ${LANG_FRENCH} "fr"
+LangString LanguageCode ${LANG_JAPANESE} "ja"
+LangString LanguageCode ${LANG_ITALIAN} "it"
+##LangString LanguageCode ${LANG_POLISH} "pl"
+LangString LanguageCode ${LANG_PORTUGUESEBR} "pt"
+LangString LanguageCode ${LANG_RUSSIAN} "ru"
+LangString LanguageCode ${LANG_TURKISH} "tr"
+LangString LanguageCode ${LANG_TRADCHINESE} "zh"
+
+# This placeholder is replaced by viewer_manifest.py
+%%INST_VARS%%
+
+Name ${INSTNAME}
+
+SubCaption 0 $(LicenseSubTitleSetup) # Override "license agreement" text
+
+!define MUI_ICON "%%SOURCE%%\installers\windows\install_icon.ico"
+!define MUI_UNICON "%%SOURCE%%\installers\windows\uninstall_icon.ico"
+
+BrandingText " " # Bottom of window text
+Icon "${MUI_ICON}"
+UninstallIcon "${MUI_UNICON}"
+WindowIcon on # Show our icon in left corner
+BGGradient off # No big background window
+CRCCheck on # Make sure CRC is OK
+InstProgressFlags smooth colored # New colored smooth look
+SetOverwrite on # Overwrite files by default
+AutoCloseWindow true # After all files install, close window
+
+# Registry key paths, ours and Microsoft's
+!define LINDEN_KEY "SOFTWARE\Linden Research, Inc."
+!define INSTNAME_KEY "${LINDEN_KEY}\${INSTNAME}"
+!define MSCURRVER_KEY "SOFTWARE\Microsoft\Windows\CurrentVersion"
+!define MSNTCURRVER_KEY "SOFTWARE\Microsoft\Windows NT\CurrentVersion"
+!define MSUNINSTALL_KEY "${MSCURRVER_KEY}\Uninstall\${INSTNAME}"
+
+# from http://nsis.sourceforge.net/Docs/MultiUser/Readme.html
+### Highest level permitted for user: Admin for Admin, Standard for Standard
+##!define MULTIUSER_EXECUTIONLEVEL Highest
+!define MULTIUSER_EXECUTIONLEVEL Admin
+!define MULTIUSER_MUI
+### Look for /AllUsers or /CurrentUser switches
+##!define MULTIUSER_INSTALLMODE_COMMANDLINE
+# appended to $PROGRAMFILES, as affected by MULTIUSER_USE_PROGRAMFILES64
+!define MULTIUSER_INSTALLMODE_INSTDIR "${INSTNAME}"
+# expands to !define MULTIUSER_USE_PROGRAMFILES64 or nothing
+%%PROGRAMFILES%%
+# should make MultiUser.nsh initialization read existing INSTDIR from registry
+## SL-10506: don't
+##!define MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_KEY "${INSTNAME_KEY}"
+##!define MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_VALUENAME ""
+# Don't set MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_KEY and
+# MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_VALUENAME to cause the installer to
+# write $MultiUser.InstallMode to the registry, because when the user installs
+# multiple viewers with the same channel (same ${INSTNAME}, hence same
+# ${INSTNAME_KEY}), the registry entry is overwritten. Instead we'll write a
+# little file into the install directory -- see .onInstSuccess and un.onInit.
+!include MultiUser.nsh
+!include MUI2.nsh
+!define MUI_BGCOLOR FFFFFF
+!insertmacro MUI_FUNCTION_GUIINIT
+
+UninstallText $(UninstallTextMsg)
+DirText $(DirectoryChooseTitle) $(DirectoryChooseSetup)
+##!insertmacro MULTIUSER_PAGE_INSTALLMODE
+!define MUI_PAGE_CUSTOMFUNCTION_PRE dirPre
+!insertmacro MUI_PAGE_DIRECTORY
+!insertmacro MUI_PAGE_INSTFILES
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Variables
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Var INSTNAME
+Var INSTEXE
+Var VIEWER_EXE
+Var INSTSHORTCUT
+Var COMMANDLINE # Command line passed to this installer, set in .onInit
+Var SHORTCUT_LANG_PARAM # "--set InstallLanguage de", Passes language to viewer
+Var SKIP_DIALOGS # Set from command line in .onInit. autoinstall GUI and the defaults.
+Var SKIP_AUTORUN # Skip automatic launch of the viewer after install
+Var DO_UNINSTALL_V2 # If non-null, path to a previous Viewer 2 installation that will be uninstalled.
+
+# Function definitions should go before file includes, because calls to
+# DLLs like LangDLL trigger an implicit file include, so if that call is at
+# the end of this script NSIS has to decompress the whole installer before
+# it can call the DLL function. JC
+
+!include "FileFunc.nsh" # For GetParameters, GetOptions
+!insertmacro GetParameters
+!insertmacro GetOptions
+!include WinVer.nsh # For OS and SP detection
+!include 'LogicLib.nsh' # for value comparison
+!include "x64.nsh" # for 64bit detection
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Pre-directory page callback
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function dirPre
+ StrCmp $SKIP_DIALOGS "true" 0 +2
+ Abort
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Prep Installer Section
+;;
+;; Note: to add new languages, add a language file include to the list
+;; at the top of this file, add an entry to the menu and then add an
+;; entry to the language ID selector below
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function .onInit
+!insertmacro MULTIUSER_INIT
+
+%%ENGAGEREGISTRY%%
+
+# SL-10506: Setting MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_KEY and
+# MULTIUSER_INSTALLMODE_INSTDIR_REGISTRY_VALUENAME should
+# read the current location of the install for this version into INSTDIR.
+# However, SL-10506 complains about the resulting behavior, so the logic below
+# is adapted from before we introduced MultiUser.nsh.
+
+# if $0 is empty, this is the first time for this viewer name
+ReadRegStr $0 SHELL_CONTEXT "${INSTNAME_KEY}" ""
+
+# viewer with this name was installed before
+${If} $0 != ""
+ # use the value we got from registry as install location
+ StrCpy $INSTDIR $0
+${EndIf}
+
+Call CheckCPUFlags # Make sure we have SSE2 support
+Call CheckWindowsVersion # Don't install On unsupported systems
+ Push $0
+ ${GetParameters} $COMMANDLINE # Get our command line
+
+ ${GetOptions} $COMMANDLINE "/SKIP_DIALOGS" $0
+ IfErrors +2 0 # If error jump past setting SKIP_DIALOGS
+ StrCpy $SKIP_DIALOGS "true"
+
+ ${GetOptions} $COMMANDLINE "/SKIP_AUTORUN" $0
+ IfErrors +2 0 ; If error jump past setting SKIP_AUTORUN
+ StrCpy $SKIP_AUTORUN "true"
+
+ ${GetOptions} $COMMANDLINE "/LANGID=" $0 # /LANGID=1033 implies US English
+
+# If no language (error), then proceed
+ IfErrors lbl_configure_default_lang
+# No error means we got a language, so use it
+ StrCpy $LANGUAGE $0
+ Goto lbl_return
+
+lbl_configure_default_lang:
+# If we currently have a version of SL installed, default to the language of that install
+# Otherwise don't change $LANGUAGE and it will default to the OS UI language.
+ ReadRegStr $0 SHELL_CONTEXT "${INSTNAME_KEY}" "InstallerLanguage"
+ IfErrors +2 0 # If error skip the copy instruction
+ StrCpy $LANGUAGE $0
+
+# For silent installs, no language prompt, use default
+ IfSilent 0 +3
+ StrCpy $SKIP_AUTORUN "true"
+ Goto lbl_return
+ StrCmp $SKIP_DIALOGS "true" lbl_return
+
+ Push ""
+# Use separate file so labels can be UTF-16 but we can still merge changes into this ASCII file. JC
+ !include "%%SOURCE%%\installers\windows\language_menu.nsi"
+
+ Push A # A means auto count languages for the auto count to work the first empty push (Push "") must remain
+ LangDLL::LangDialog $(InstallerLanguageTitle) $(SelectInstallerLanguage)
+ Pop $0
+ StrCmp $0 "cancel" 0 +2
+ Abort
+ StrCpy $LANGUAGE $0
+
+# Save language in registry
+ WriteRegStr SHELL_CONTEXT "${INSTNAME_KEY}" "InstallerLanguage" $LANGUAGE
+lbl_return:
+ Pop $0
+ Return
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Prep Uninstaller Section
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function un.onInit
+ # Save $INSTDIR -- it appears to have the correct value before
+ # MULTIUSER_UNINIT, but then gets munged by MULTIUSER_UNINIT?!
+ Push $INSTDIR
+ !insertmacro MULTIUSER_UNINIT
+ Pop $INSTDIR
+
+ # Now read InstallMode.txt from $INSTDIR
+ Push $0
+ ClearErrors
+ FileOpen $0 "$INSTDIR\InstallMode.txt" r
+ IfErrors skipread
+ FileRead $0 $MultiUser.InstallMode
+ FileClose $0
+skipread:
+ Pop $0
+
+%%ENGAGEREGISTRY%%
+
+# Read language from registry and set for uninstaller. Key will be removed on successful uninstall
+ ReadRegStr $0 SHELL_CONTEXT "${INSTNAME_KEY}" "InstallerLanguage"
+ IfErrors lbl_end
+ StrCpy $LANGUAGE $0
+lbl_end:
+
+## MessageBox MB_OK "After restoring:$\n$$INSTDIR = '$INSTDIR'$\n$$MultiUser.InstallMode = '$MultiUser.InstallMode'$\n$$LANGUAGE = '$LANGUAGE'"
+
+ Return
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Checks for CPU valid (must have SSE2 support)
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function CheckCPUFlags
+ Push $1
+ System::Call 'kernel32::IsProcessorFeaturePresent(i) i(10) .r1'
+ IntCmp $1 1 OK_SSE2
+ MessageBox MB_OKCANCEL $(MissingSSE2) /SD IDOK IDOK OK_SSE2
+ Quit
+
+ OK_SSE2:
+ Pop $1
+ Return
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Make sure this computer meets the minimum system requirements.
+;; Currently: Windows Vista SP2
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function CheckWindowsVersion
+ ${If} ${AtMostWin2003}
+ MessageBox MB_OK $(CheckWindowsVersionMB)
+ Quit
+ ${EndIf}
+
+ ${If} ${IsWinVista}
+ ${AndIfNot} ${IsServicePack} 2
+ MessageBox MB_OK $(CheckWindowsVersionMB)
+ Quit
+ ${EndIf}
+
+ ${If} ${IsWin2008}
+ ${AndIfNot} ${IsServicePack} 2
+ MessageBox MB_OK $(CheckWindowsVersionMB)
+ Quit
+ ${EndIf}
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Install Section
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Section ""
+
+# SetShellVarContext is set by MultiUser.nsh initialization.
+
+# Start with some default values.
+StrCpy $INSTNAME "${INSTNAME}"
+StrCpy $INSTEXE "${INSTEXE}"
+StrCpy $VIEWER_EXE "${VIEWER_EXE}"
+StrCpy $INSTSHORTCUT "${SHORTCUT}"
+
+Call CheckIfAdministrator # Make sure the user can install/uninstall
+Call CloseSecondLife # Make sure Second Life not currently running
+Call CheckWillUninstallV2 # Check if Second Life is already installed
+
+StrCmp $DO_UNINSTALL_V2 "" PRESERVE_DONE
+PRESERVE_DONE:
+
+# Viewer had "SLLauncher" for some time and we was seting "IsHostApp" for viewer, make sure to clean it up
+DeleteRegValue HKEY_CLASSES_ROOT "Applications\$VIEWER_EXE" "IsHostApp"
+DeleteRegValue HKEY_CLASSES_ROOT "Applications\$VIEWER_EXE" "NoStartPage"
+ClearErrors
+
+INSTALL_FILES_START:
+
+Call RemoveProgFilesOnInst # Remove existing files to prevent certain errors when running the new version of the viewer
+
+# This placeholder is replaced by the complete list of all the files in the installer, by viewer_manifest.py
+%%INSTALL_FILES%%
+
+IfErrors 0 INSTALL_FILES_DONE
+ StrCmp $SKIP_DIALOGS "true" INSTALL_FILES_DONE
+ MessageBox MB_ABORTRETRYIGNORE $(ErrorSecondLifeInstallRetry) IDABORT INSTALL_FILES_CANCEL IDRETRY INSTALL_FILES_START
+ # MB_ABORTRETRYIGNORE does not accept IDIGNORE
+ Goto INSTALL_FILES_DONE
+
+INSTALL_FILES_CANCEL:
+ # We are quiting, cleanup.
+ # Silence warnings from RemoveProgFilesOnInst.
+ StrCpy $SKIP_DIALOGS "true"
+ Call RemoveProgFilesOnInst
+ MessageBox MB_OK $(ErrorSecondLifeInstallSupport)
+ Quit
+
+INSTALL_FILES_DONE:
+
+# Pass the installer's language to the client to use as a default
+StrCpy $SHORTCUT_LANG_PARAM "--set InstallLanguage $(LanguageCode)"
+
+# Shortcuts in start menu
+CreateDirectory "$SMPROGRAMS\$INSTSHORTCUT"
+SetOutPath "$INSTDIR"
+CreateShortCut "$SMPROGRAMS\$INSTSHORTCUT\$INSTSHORTCUT.lnk" \
+ "$INSTDIR\$VIEWER_EXE" "$SHORTCUT_LANG_PARAM" "$INSTDIR\$VIEWER_EXE"
+
+
+WriteINIStr "$SMPROGRAMS\$INSTSHORTCUT\SL Create Account.url" \
+ "InternetShortcut" "URL" \
+ "http://join.secondlife.com/"
+WriteINIStr "$SMPROGRAMS\$INSTSHORTCUT\SL Your Account.url" \
+ "InternetShortcut" "URL" \
+ "http://www.secondlife.com/account/"
+WriteINIStr "$SMPROGRAMS\$INSTSHORTCUT\SL Scripting Language Help.url" \
+ "InternetShortcut" "URL" \
+ "http://wiki.secondlife.com/wiki/LSL_Portal"
+CreateShortCut "$SMPROGRAMS\$INSTSHORTCUT\Uninstall $INSTSHORTCUT.lnk" \
+ '"$INSTDIR\uninst.exe"' ''
+
+# Other shortcuts
+SetOutPath "$INSTDIR"
+CreateShortCut "$DESKTOP\$INSTSHORTCUT.lnk" \
+ "$INSTDIR\$VIEWER_EXE" "$SHORTCUT_LANG_PARAM" "$INSTDIR\$VIEWER_EXE"
+CreateShortCut "$INSTDIR\$INSTSHORTCUT.lnk" \
+ "$INSTDIR\$VIEWER_EXE" "$SHORTCUT_LANG_PARAM" "$INSTDIR\$VIEWER_EXE"
+CreateShortCut "$INSTDIR\Uninstall $INSTSHORTCUT.lnk" \
+ '"$INSTDIR\uninst.exe"' ''
+
+# Write registry
+WriteRegStr SHELL_CONTEXT "${INSTNAME_KEY}" "" "$INSTDIR"
+WriteRegStr SHELL_CONTEXT "${INSTNAME_KEY}" "Version" "${VERSION_LONG}"
+WriteRegStr SHELL_CONTEXT "${INSTNAME_KEY}" "Shortcut" "$INSTSHORTCUT"
+WriteRegStr SHELL_CONTEXT "${INSTNAME_KEY}" "Exe" "$VIEWER_EXE"
+WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "Publisher" "Linden Research, Inc."
+WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "URLInfoAbout" "http://secondlife.com/whatis/"
+WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "URLUpdateInfo" "http://secondlife.com/support/downloads/"
+WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "HelpLink" "https://support.secondlife.com/contact-support/"
+WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "DisplayName" "$INSTNAME"
+WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "UninstallString" '"$INSTDIR\uninst.exe"'
+WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "DisplayVersion" "${VERSION_LONG}"
+WriteRegDWORD SHELL_CONTEXT "${MSUNINSTALL_KEY}" "EstimatedSize" "0x0001D500" # ~117 MB
+
+# from FS:Ansariel
+WriteRegStr SHELL_CONTEXT "${MSUNINSTALL_KEY}" "DisplayIcon" '"$INSTDIR\$VIEWER_EXE"'
+
+# BUG-2707 Disable SEHOP for installed viewer.
+WriteRegDWORD SHELL_CONTEXT "${MSNTCURRVER_KEY}\Image File Execution Options\$VIEWER_EXE" "DisableExceptionChainValidation" 1
+
+# Write URL registry info
+WriteRegStr HKEY_CLASSES_ROOT "${URLNAME}" "(default)" "URL:Second Life"
+WriteRegStr HKEY_CLASSES_ROOT "${URLNAME}" "URL Protocol" ""
+WriteRegStr HKEY_CLASSES_ROOT "${URLNAME}\DefaultIcon" "" '"$INSTDIR\$VIEWER_EXE"'
+
+# URL param must be last item passed to viewer, it ignores subsequent params to avoid parameter injection attacks.
+# MAINT-8305: On SLURL click, directly invoke the viewer, not the launcher.
+WriteRegExpandStr HKEY_CLASSES_ROOT "${URLNAME}\shell\open\command" "" '"$INSTDIR\$VIEWER_EXE" -url "%1"'
+WriteRegStr HKEY_CLASSES_ROOT "x-grid-location-info" "(default)" "URL:Second Life"
+WriteRegStr HKEY_CLASSES_ROOT "x-grid-location-info" "URL Protocol" ""
+WriteRegStr HKEY_CLASSES_ROOT "x-grid-location-info\DefaultIcon" "" '"$INSTDIR\$VIEWER_EXE"'
+
+# URL param must be last item passed to viewer, it ignores subsequent params to avoid parameter injection attacks.
+WriteRegExpandStr HKEY_CLASSES_ROOT "x-grid-location-info\shell\open\command" "" '"$INSTDIR\$VIEWER_EXE" -url "%1"'
+
+WriteRegStr HKEY_CLASSES_ROOT "Applications\$INSTEXE" "IsHostApp" ""
+##WriteRegStr HKEY_CLASSES_ROOT "Applications\${VIEWER_EXE}" "NoStartPage" ""
+
+# Write out uninstaller
+WriteUninstaller "$INSTDIR\uninst.exe"
+
+# Uninstall existing "Second Life Viewer 2" install if needed.
+StrCmp $DO_UNINSTALL_V2 "" REMOVE_SLV2_DONE
+ ExecWait '"$PROGRAMFILES\SecondLifeViewer2\uninst.exe" /S _?=$PROGRAMFILES\SecondLifeViewer2'
+ Delete "$PROGRAMFILES\SecondLifeViewer2\uninst.exe" # With _? option above, uninst.exe will be left behind.
+ RMDir "$PROGRAMFILES\SecondLifeViewer2" # Will remove only if empty.
+
+REMOVE_SLV2_DONE:
+
+SectionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Uninstall Section
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Section Uninstall
+
+# Start with some default values.
+StrCpy $INSTNAME "${INSTNAME}"
+StrCpy $INSTEXE "${INSTEXE}"
+StrCpy $VIEWER_EXE "${VIEWER_EXE}"
+StrCpy $INSTSHORTCUT "${SHORTCUT}"
+
+# SetShellVarContext per the mode saved at install time in registry at
+# MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_KEY
+# MULTIUSER_INSTALLMODE_DEFAULT_REGISTRY_VALUENAME
+# Couldn't get NSIS to expand $MultiUser.InstallMode into the function name at Call time
+${If} $MultiUser.InstallMode == 'AllUsers'
+##MessageBox MB_OK "Uninstalling for all users"
+ Call un.MultiUser.InstallMode.AllUsers
+${Else}
+##MessageBox MB_OK "Uninstalling for current user"
+ Call un.MultiUser.InstallMode.CurrentUser
+${EndIf}
+
+# Make sure we're not running
+Call un.CloseSecondLife
+
+# Clean up registry keys and subkeys (these should all be !defines somewhere)
+DeleteRegKey SHELL_CONTEXT "${INSTNAME_KEY}"
+DeleteRegKey SHELL_CONTEXT "${MSCURRVER_KEY}\Uninstall\$INSTNAME"
+# BUG-2707 Remove entry that disabled SEHOP
+DeleteRegKey SHELL_CONTEXT "${MSNTCURRVER_KEY}\Image File Execution Options\$VIEWER_EXE"
+DeleteRegKey HKEY_CLASSES_ROOT "Applications\$INSTEXE"
+DeleteRegKey HKEY_CLASSES_ROOT "Applications\${VIEWER_EXE}"
+
+# Clean up shortcuts
+Delete "$SMPROGRAMS\$INSTSHORTCUT\*.*"
+RMDir "$SMPROGRAMS\$INSTSHORTCUT"
+
+Delete "$DESKTOP\$INSTSHORTCUT.lnk"
+Delete "$INSTDIR\$INSTSHORTCUT.lnk"
+Delete "$INSTDIR\Uninstall $INSTSHORTCUT.lnk"
+
+# Remove the main installation directory
+Call un.ProgramFiles
+
+# Clean up cache and log files, but leave them in-place for non AGNI installs.
+Call un.UserSettingsFiles
+
+SectionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Make sure the user can install/uninstall
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function CheckIfAdministrator
+ DetailPrint $(CheckAdministratorInstDP)
+ UserInfo::GetAccountType
+ Pop $R0
+ StrCmp $R0 "Admin" lbl_is_admin
+ MessageBox MB_OK $(CheckAdministratorInstMB)
+ Quit
+lbl_is_admin:
+ Return
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Function CheckWillUninstallV2
+;;
+;; If called through auto-update, need to uninstall any existing V2 installation.
+;; Don't want to end up with SecondLifeViewer2 and SecondLifeViewer installations
+;; existing side by side with no indication on which to use.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function CheckWillUninstallV2
+
+ StrCpy $DO_UNINSTALL_V2 ""
+
+ StrCmp $SKIP_DIALOGS "true" 0 CHECKV2_DONE
+ StrCmp $INSTDIR "$PROGRAMFILES\SecondLifeViewer2" CHECKV2_DONE # Don't uninstall our own install dir.
+ IfFileExists "$PROGRAMFILES\SecondLifeViewer2\uninst.exe" CHECKV2_FOUND CHECKV2_DONE
+
+CHECKV2_FOUND:
+ StrCpy $DO_UNINSTALL_V2 "true"
+
+CHECKV2_DONE:
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Close the program, if running. Modifies no variables.
+;; Allows user to bail out of install process.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function CloseSecondLife
+ Push $0
+ FindWindow $0 "Second Life" ""
+ IntCmp $0 0 DONE
+
+ StrCmp $SKIP_DIALOGS "true" CLOSE
+ MessageBox MB_OKCANCEL $(CloseSecondLifeInstMB) IDOK CLOSE IDCANCEL CANCEL_INSTALL
+
+ CANCEL_INSTALL:
+ Quit
+
+ CLOSE:
+ DetailPrint $(CloseSecondLifeInstDP)
+ SendMessage $0 16 0 0
+
+ LOOP:
+ FindWindow $0 "Second Life" ""
+ IntCmp $0 0 SLEEP
+ Sleep 500
+ Goto LOOP
+
+ SLEEP:
+ # Second life window just closed, but program might not be fully done yet
+ # and OS might have not released some locks, wait a bit more to make sure
+ # all file handles were released.
+ # If something still isn't unlocked, it will trigger a notification from
+ # RemoveProgFilesOnInst
+ Sleep 1000
+ DONE:
+ Pop $0
+ Return
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Close the program, if running. Modifies no variables.
+;; Allows user to bail out of uninstall process.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function un.CloseSecondLife
+ Push $0
+ FindWindow $0 "Second Life" ""
+ IntCmp $0 0 DONE
+ MessageBox MB_OKCANCEL $(CloseSecondLifeUnInstMB) IDOK CLOSE IDCANCEL CANCEL_UNINSTALL
+
+ CANCEL_UNINSTALL:
+ Quit
+
+ CLOSE:
+ DetailPrint $(CloseSecondLifeUnInstDP)
+ SendMessage $0 16 0 0
+
+ LOOP:
+ FindWindow $0 "Second Life" ""
+ IntCmp $0 0 DONE
+ Sleep 500
+ Goto LOOP
+
+ DONE:
+ Pop $0
+ Return
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Delete files on install if previous install exists to prevent undesired behavior
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function RemoveProgFilesOnInst
+
+# We do not remove whole pervious install folder on install, since
+# there is a chance that viewer was installed into some important
+# folder by intent or accident
+# RMDir /r $INSTDIR is especially unsafe if user installed somewhere
+# like Program Files
+
+# Set retry counter. All integers are strings.
+Push $0
+StrCpy $0 0
+
+ClearErrors
+
+PREINSTALL_REMOVE:
+
+# Remove old SecondLife.exe to invalidate any old shortcuts to it that may be in non-standard locations. See MAINT-3575
+Delete "$INSTDIR\$INSTEXE"
+Delete "$INSTDIR\$VIEWER_EXE"
+
+# Remove old shader files first so fallbacks will work. See DEV-5663
+RMDir /r "$INSTDIR\app_settings\shaders"
+
+# Remove folders to clean up files removed during development
+RMDir /r "$INSTDIR\app_settings"
+RMDir /r "$INSTDIR\skins"
+RMDir /r "$INSTDIR\vmp_icons"
+
+# Remove llplugin, plugins can crash or malfunction if they
+# find modules from different versions
+RMDir /r "$INSTDIR\llplugin"
+
+IntOp $0 $0 + 1
+
+IfErrors 0 PREINSTALL_DONE
+ IntCmp $0 1 PREINSTALL_REMOVE #try again once
+ StrCmp $SKIP_DIALOGS "true" PREINSTALL_DONE
+ MessageBox MB_ABORTRETRYIGNORE $(CloseSecondLifeInstRM) IDABORT PREINSTALL_FAIL IDRETRY PREINSTALL_REMOVE
+ # MB_ABORTRETRYIGNORE does not accept IDIGNORE
+ Goto PREINSTALL_DONE
+
+PREINSTALL_FAIL:
+ Quit
+
+PREINSTALL_DONE:
+
+# We are no longer including release notes with the viewer, so remove them.
+Delete "$SMPROGRAMS\$INSTSHORTCUT\SL Release Notes.lnk"
+Delete "$INSTDIR\releasenotes.txt"
+
+Pop $0
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Delete files in \Users\<User>\AppData\
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function un.UserSettingsFiles
+
+StrCmp $DO_UNINSTALL_V2 "true" Keep # Don't remove user's settings files on auto upgrade
+
+# Ask if user wants to keep data files or not
+MessageBox MB_YESNO|MB_ICONQUESTION $(RemoveDataFilesMB) IDYES Remove IDNO Keep
+
+Remove:
+Push $0
+Push $1
+Push $2
+
+ DetailPrint "Deleting Second Life data files"
+
+ StrCpy $0 0 # Index number used to iterate via EnumRegKey
+
+ LOOP:
+ EnumRegKey $1 SHELL_CONTEXT "${MSNTCURRVER_KEY}\ProfileList" $0
+ StrCmp $1 "" DONE # No more users
+
+ ReadRegStr $2 SHELL_CONTEXT "${MSNTCURRVER_KEY}\ProfileList\$1" "ProfileImagePath"
+ StrCmp $2 "" CONTINUE 0 # "ProfileImagePath" value is missing
+
+# Required since ProfileImagePath is of type REG_EXPAND_SZ
+ ExpandEnvStrings $2 $2
+
+# Delete files in \Users\<User>\AppData\Roaming\SecondLife
+# Remove all settings files but leave any other .txt files to preserve the chat logs
+; RMDir /r "$2\AppData\Roaming\SecondLife\logs"
+ RMDir /r "$2\AppData\Roaming\SecondLife\browser_profile"
+ RMDir /r "$2\AppData\Roaming\SecondLife\user_settings"
+ Delete "$2\AppData\Roaming\SecondLife\*.xml"
+ Delete "$2\AppData\Roaming\SecondLife\*.bmp"
+ Delete "$2\AppData\Roaming\SecondLife\search_history.txt"
+ Delete "$2\AppData\Roaming\SecondLife\plugin_cookies.txt"
+ Delete "$2\AppData\Roaming\SecondLife\typed_locations.txt"
+# Delete files in \Users\<User>\AppData\Local\SecondLife
+ RmDir /r "$2\AppData\Local\SecondLife" #Delete the cache folder
+
+ CONTINUE:
+ IntOp $0 $0 + 1
+ Goto LOOP
+ DONE:
+
+Pop $2
+Pop $1
+Pop $0
+
+# Delete files in ProgramData\Secondlife
+Push $0
+ ReadRegStr $0 SHELL_CONTEXT "${MSCURRVER_KEY}\Explorer\Shell Folders" "Common AppData"
+ StrCmp $0 "" +2
+ RMDir /r "$0\SecondLife"
+Pop $0
+
+Keep:
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Delete the installed files
+;; This deletes the uninstall executable, but it works because it is copied to temp directory before running
+;;
+;; Note: You must list all files here, because we only want to delete our files,
+;; not things users left in the program directory.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function un.ProgramFiles
+
+# This placeholder is replaced by the complete list of files to uninstall by viewer_manifest.py
+%%DELETE_FILES%%
+
+# our InstallMode.txt
+Delete "$INSTDIR\InstallMode.txt"
+
+# Optional/obsolete files. Delete won't fail if they don't exist.
+Delete "$INSTDIR\autorun.bat"
+Delete "$INSTDIR\dronesettings.ini"
+Delete "$INSTDIR\message_template.msg"
+Delete "$INSTDIR\newview.pdb"
+Delete "$INSTDIR\newview.map"
+Delete "$INSTDIR\SecondLife.pdb"
+Delete "$INSTDIR\SecondLife.map"
+Delete "$INSTDIR\comm.dat"
+Delete "$INSTDIR\*.glsl"
+Delete "$INSTDIR\motions\*.lla"
+Delete "$INSTDIR\trial\*.html"
+Delete "$INSTDIR\newview.exe"
+Delete "$INSTDIR\SecondLife.exe"
+
+# MAINT-3099 workaround - prevent these log files, if present, from causing a user alert
+Delete "$INSTDIR\VivoxVoiceService-*.log"
+
+# Remove entire help directory
+RMDir /r "$INSTDIR\help"
+
+Delete "$INSTDIR\uninst.exe"
+RMDir "$INSTDIR"
+
+IfFileExists "$INSTDIR" FOLDERFOUND NOFOLDER
+
+FOLDERFOUND:
+ MessageBox MB_OK $(DeleteProgramFilesMB) /SD IDOK IDOK NOFOLDER
+
+NOFOLDER:
+
+MessageBox MB_YESNO $(DeleteRegistryKeysMB) IDYES DeleteKeys IDNO NoDelete
+
+DeleteKeys:
+ DeleteRegKey SHELL_CONTEXT "SOFTWARE\Classes\x-grid-location-info"
+ DeleteRegKey SHELL_CONTEXT "SOFTWARE\Classes\secondlife"
+ DeleteRegKey HKEY_CLASSES_ROOT "x-grid-location-info"
+ DeleteRegKey HKEY_CLASSES_ROOT "secondlife"
+
+NoDelete:
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; After install completes, launch app
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function .onInstSuccess
+ Push $0
+ FileOpen $0 "$INSTDIR\InstallMode.txt" w
+ # No newline -- this is for our use, not for users to read.
+ FileWrite $0 "$MultiUser.InstallMode"
+ FileClose $0
+ Pop $0
+
+ Push $R0
+ Push $0
+ ;; MAINT-7812: Only write nsis.winstall file with /marker switch
+ ${GetParameters} $R0
+ ${GetOptionsS} $R0 "/marker" $0
+ ;; If no /marker switch, skip to ClearErrors
+ IfErrors +4 0
+ ;; $EXEDIR is where we find the installer file
+ ;; Put a marker file there so VMP will know we're done
+ ;; and it can delete the download directory next time.
+ ;; http://nsis.sourceforge.net/Write_text_to_a_file
+ FileOpen $0 "$EXEDIR\nsis.winstall" w
+ FileWrite $0 "NSIS done$\n"
+ FileClose $0
+
+ ClearErrors
+ Pop $0
+ Pop $R0
+
+ Call CheckWindowsServPack # Warn if not on the latest SP before asking to launch.
+ StrCmp $SKIP_AUTORUN "true" +2;
+ # Assumes SetOutPath $INSTDIR
+ # Run INSTEXE (our updater), passing VIEWER_EXE plus the command-line
+ # arguments built into our shortcuts. This gives the updater a chance
+ # to verify that the viewer we just installed is appropriate for the
+ # running system -- or, if not, to download and install a different
+ # viewer. For instance, if a user running 32-bit Windows installs a
+ # 64-bit viewer, it cannot run on this system. But since the updater
+ # is a 32-bit executable even in the 64-bit viewer package, the
+ # updater can detect the problem and adapt accordingly.
+ # Once everything is in order, the updater will run the specified
+ # viewer with the specified params.
+ # Quote the updater executable and the viewer executable because each
+ # must be a distinct command-line token, but DO NOT quote the language
+ # string because it must decompose into separate command-line tokens.
+ Exec '"$INSTDIR\$INSTEXE" precheck "$INSTDIR\$VIEWER_EXE" $SHORTCUT_LANG_PARAM'
+#
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Recommend Upgrading to Service Pack 1 for Windows 7, if not present
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+Function CheckWindowsServPack
+ ${If} ${IsWin7}
+ ${AndIfNot} ${IsServicePack} 1
+ MessageBox MB_OK $(CheckWindowsServPackMB)
+ DetailPrint $(UseLatestServPackDP)
+ Return
+ ${EndIf}
+
+ ${If} ${IsWin2008R2}
+ ${AndIfNot} ${IsServicePack} 1
+ MessageBox MB_OK $(CheckWindowsServPackMB)
+ DetailPrint $(UseLatestServPackDP)
+ Return
+ ${EndIf}
+
+FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Clobber user files - TEST ONLY
+;; This is here for testing, DO NOT USE UNLESS YOU KNOW WHAT YOU ARE TESTING FOR!
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;Function ClobberUserFilesTESTONLY
+
+;Push $0
+;Push $1
+;Push $2
+;
+; StrCpy $0 0 # Index number used to iterate via EnumRegKey
+;
+; LOOP:
+; EnumRegKey $1 SHELL_CONTEXT "${MSNTCURRVER_KEY}\ProfileList" $0
+; StrCmp $1 "" DONE # no more users
+;
+; ReadRegStr $2 SHELL_CONTEXT "${MSNTCURRVER_KEY}\ProfileList\$1" "ProfileImagePath"
+; StrCmp $2 "" CONTINUE 0 # "ProfileImagePath" value is missing
+;
+;# Required since ProfileImagePath is of type REG_EXPAND_SZ
+; ExpandEnvStrings $2 $2
+;
+; RMDir /r "$2\Application Data\SecondLife\"
+;
+; CONTINUE:
+; IntOp $0 $0 + 1
+; Goto LOOP
+; DONE:
+;
+;Pop $2
+;Pop $1
+;Pop $0
+;
+;# Copy files in Documents and Settings\All Users\SecondLife
+;Push $0
+; ReadRegStr $0 SHELL_CONTEXT "${MSCURRVER_KEY}\Explorer\Shell Folders" "Common AppData"
+; StrCmp $0 "" +2
+; RMDir /r "$2\Application Data\SecondLife\"
+;Pop $0
+;
+;FunctionEnd
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; EOF ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 12:58:01 +0000