1 files changed, 19 insertions, 118 deletions
diff --git a/indra/newview/app_settings/shaders/class2/windlight/atmosphericsV.glsl b/indra/newview/app_settings/shaders/class2/windlight/atmosphericsV.glsl
index 445d7c6352..4c418e414f 100644
--- a/indra/newview/app_settings/shaders/class2/windlight/atmosphericsV.glsl
+++ b/indra/newview/app_settings/shaders/class2/windlight/atmosphericsV.glsl
@@ -24,6 +24,12 @@
  */
 
 // VARYING param funcs
+
+
+uniform vec3 sun_dir;
+uniform vec3 moon_dir;
+uniform int sun_up_factor;
+
 void setSunlitColor(vec3 v);
 void setAmblitColor(vec3 v);
 void setAdditiveColor(vec3 v);
@@ -32,124 +38,19 @@ void setPositionEye(vec3 v);
 
 vec3 getAdditiveColor();
 
-//VARYING vec4 vary_CloudUVs;
-//VARYING float vary_CloudDensity;
-
-// Inputs
-uniform vec4 morphFactor;
-uniform vec3 camPosLocal;
-//uniform vec4 camPosWorld;
-
-uniform vec4 lightnorm;
-uniform vec4 sunlight_color;
-uniform vec4 ambient;
-uniform vec4 blue_horizon;
-uniform vec4 blue_density;
-uniform float haze_horizon;
-uniform float haze_density;
-uniform float cloud_shadow;
-uniform float density_multiplier;
-uniform float distance_multiplier;
-uniform float max_y;
-uniform vec4 glow;
+void calcAtmosphericVars(vec3 inPositionEye, vec3 light_dir, float ambFactor, out vec3 sunlit, out vec3 amblit, out vec3 additive, out vec3 atten, bool use_ao);
 
 void calcAtmospherics(vec3 inPositionEye) {
-    
-	vec3 P = inPositionEye;
-	setPositionEye(P);
-	
-	//(TERRAIN) limit altitude
-	if (P.y > max_y) P *= (max_y / P.y);
-	if (P.y < -max_y) P *= (-max_y / P.y);
-
-	vec3 tmpLightnorm = lightnorm.xyz;
-
-	vec3 Pn = normalize(P);
-	float  Plen = length(P);
-
-	vec4 temp1 = vec4(0);
-	vec3 temp2 = vec3(0);
-	vec4 blue_weight;
-	vec4 haze_weight;
-	vec4 sunlight = sunlight_color;
-	vec4 light_atten;
-
-	//sunlight attenuation effect (hue and brightness) due to atmosphere
-	//this is used later for sunlight modulation at various altitudes
-	light_atten = (blue_density + vec4(haze_density * 0.25)) * (density_multiplier * max_y);
-		//I had thought blue_density and haze_density should have equal weighting,
-		//but attenuation due to haze_density tends to seem too strong
-
-	temp1 = blue_density + vec4(haze_density);
-	blue_weight = blue_density / temp1;
-	haze_weight = vec4(haze_density) / temp1;
-
-	//(TERRAIN) compute sunlight from lightnorm only (for short rays like terrain)
-	temp2.y = max(0.0, tmpLightnorm.y);
-	temp2.y = 1. / temp2.y;
-	sunlight *= exp( - light_atten * temp2.y);
-
-	// main atmospheric scattering line integral
-	temp2.z = Plen * density_multiplier;
-
-	// Transparency (-> temp1)
-	// ATI Bugfix -- can't store temp1*temp2.z*distance_multiplier in a variable because the ati
-	// compiler gets confused.
-	temp1 = exp(-temp1 * temp2.z * distance_multiplier);
-
-	//final atmosphere attenuation factor
-	setAtmosAttenuation(temp1.rgb);
-	//vary_AtmosAttenuation = distance_multiplier / 10000.;
-	//vary_AtmosAttenuation = density_multiplier * 100.;
-	//vary_AtmosAttenuation = vec4(Plen / 100000., 0., 0., 1.);
-
-	//compute haze glow
-	//(can use temp2.x as temp because we haven't used it yet)
-	temp2.x = dot(Pn, tmpLightnorm.xyz);
-	temp2.x = 1. - temp2.x;
-		//temp2.x is 0 at the sun and increases away from sun
-	temp2.x = max(temp2.x, .03);	//was glow.y
-		//set a minimum "angle" (smaller glow.y allows tighter, brighter hotspot)
-	temp2.x *= glow.x;
-		//higher glow.x gives dimmer glow (because next step is 1 / "angle")
-	temp2.x = pow(temp2.x, glow.z);
-		//glow.z should be negative, so we're doing a sort of (1 / "angle") function
-
-	//add "minimum anti-solar illumination"
-	temp2.x += .25;
-
-
-	//increase ambient when there are more clouds
-	vec4 tmpAmbient = ambient + (vec4(1.) - ambient) * cloud_shadow * 0.5;
-
-	//haze color
-	setAdditiveColor(
-		vec3(blue_horizon * blue_weight * (sunlight*(1.-cloud_shadow) + tmpAmbient)
-	  + (haze_horizon * haze_weight) * (sunlight*(1.-cloud_shadow) * temp2.x
-		  + tmpAmbient)));
-	
-	//brightness of surface both sunlight and ambient
-	setSunlitColor(vec3(sunlight * .5));
-	setAmblitColor(vec3(tmpAmbient * .25));
-	setAdditiveColor(getAdditiveColor() * vec3(1.0 - temp1));
-
-	// vary_SunlitColor = vec3(0);
-	// vary_AmblitColor = vec3(0);
-	// vary_AdditiveColor = vec4(Pn, 1.0);
-
-	/*
-	const float cloudShadowScale = 100.;
-	// Get cloud uvs for shadowing
-	vec3 cloudPos = inPositionEye + camPosWorld - cloudShadowScale / 2.;
-	vary_CloudUVs.xy = cloudPos.xz / cloudShadowScale;
-
-	// We can take uv1 and multiply it by (TerrainSpan / CloudSpan)
-//	cloudUVs *= (((worldMaxZ - worldMinZ) * 20) /40000.);
-	vary_CloudUVs *= (10000./40000.);
-
-	// Offset by sun vector * (CloudAltitude / CloudSpan)
-	vary_CloudUVs.x += tmpLightnorm.x / tmpLightnorm.y * (3000./40000.);
-	vary_CloudUVs.y += tmpLightnorm.z / tmpLightnorm.y * (3000./40000.);
-	*/
+    vec3 P = inPositionEye;
+    setPositionEye(P);
+    vec3 tmpsunlit = vec3(1);
+    vec3 tmpamblit = vec3(1);
+    vec3 tmpaddlit = vec3(1);
+    vec3 tmpattenlit = vec3(1);
+	vec3 light_dir = (sun_up_factor == 1) ? sun_dir : moon_dir;	
+    calcAtmosphericVars(inPositionEye, light_dir, 1, tmpsunlit, tmpamblit, tmpaddlit, tmpattenlit, false);
+    setSunlitColor(tmpsunlit);
+    setAmblitColor(tmpamblit);
+    setAdditiveColor(tmpaddlit);
+    setAtmosAttenuation(tmpattenlit);
 }
-