diff options
Diffstat (limited to 'indra/newview/app_settings/shaders/class1/deferred/materialF.glsl')
| -rw-r--r-- | indra/newview/app_settings/shaders/class1/deferred/materialF.glsl | 788 |
1 files changed, 788 insertions, 0 deletions
diff --git a/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl b/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl new file mode 100644 index 0000000000..07d28ed4cd --- /dev/null +++ b/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl @@ -0,0 +1,788 @@ +/** + * @file materialF.glsl + * + * $LicenseInfo:firstyear=2007&license=viewerlgpl$ + * Second Life Viewer Source Code + * Copyright (C) 2007, Linden Research, Inc. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; + * version 2.1 of the License only. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + * + * Linden Research, Inc., 945 Battery Street, San Francisco, CA 94111 USA + * $/LicenseInfo$ + */ + +#define DIFFUSE_ALPHA_MODE_IGNORE 0 +#define DIFFUSE_ALPHA_MODE_BLEND 1 +#define DIFFUSE_ALPHA_MODE_MASK 2 +#define DIFFUSE_ALPHA_MODE_EMISSIVE 3 + +uniform float emissive_brightness; +uniform float display_gamma; + +vec3 srgb_to_linear(vec3 cs) +{ + vec3 low_range = cs / vec3(12.92); + vec3 high_range = pow((cs+vec3(0.055))/vec3(1.055), vec3(2.4)); + bvec3 lte = lessThanEqual(cs,vec3(0.04045)); + +#ifdef OLD_SELECT + vec3 result; + result.r = lte.r ? low_range.r : high_range.r; + result.g = lte.g ? low_range.g : high_range.g; + result.b = lte.b ? low_range.b : high_range.b; + return result; +#else + return mix(high_range, low_range, lte); +#endif + +} + +vec3 linear_to_srgb(vec3 cl) +{ + cl = clamp(cl, vec3(0), vec3(1)); + vec3 low_range = cl * 12.92; + vec3 high_range = 1.055 * pow(cl, vec3(0.41666)) - 0.055; + bvec3 lt = lessThan(cl,vec3(0.0031308)); + +#ifdef OLD_SELECT + vec3 result; + result.r = lt.r ? low_range.r : high_range.r; + result.g = lt.g ? low_range.g : high_range.g; + result.b = lt.b ? low_range.b : high_range.b; + return result; +#else + return mix(high_range, low_range, lt); +#endif + +} + +#if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_BLEND) + +#ifdef DEFINE_GL_FRAGCOLOR +out vec4 frag_color; +#else +#define frag_color gl_FragColor +#endif + +#if HAS_SUN_SHADOW + +uniform sampler2DShadow shadowMap0; +uniform sampler2DShadow shadowMap1; +uniform sampler2DShadow shadowMap2; +uniform sampler2DShadow shadowMap3; + +uniform mat4 shadow_matrix[6]; +uniform vec4 shadow_clip; +uniform vec2 shadow_res; +uniform float shadow_bias; + +float pcfShadow(sampler2DShadow shadowMap, vec4 stc) +{ + stc.xyz /= stc.w; + stc.z += shadow_bias; + + stc.x = floor(stc.x*shadow_res.x + fract(stc.y*shadow_res.y*12345))/shadow_res.x; // add some chaotic jitter to X sample pos according to Y to disguise the snapping going on here + + float cs = shadow2D(shadowMap, stc.xyz).x; + float shadow = cs; + + shadow += shadow2D(shadowMap, stc.xyz+vec3(2.0/shadow_res.x, 1.5/shadow_res.y, 0.0)).x; + shadow += shadow2D(shadowMap, stc.xyz+vec3(1.0/shadow_res.x, -1.5/shadow_res.y, 0.0)).x; + shadow += shadow2D(shadowMap, stc.xyz+vec3(-1.0/shadow_res.x, 1.5/shadow_res.y, 0.0)).x; + shadow += shadow2D(shadowMap, stc.xyz+vec3(-2.0/shadow_res.x, -1.5/shadow_res.y, 0.0)).x; + + return shadow*0.2; +} + +#endif + +uniform samplerCube environmentMap; +uniform sampler2D lightFunc; + +// Inputs +uniform vec4 morphFactor; +uniform vec3 camPosLocal; +//uniform vec4 camPosWorld; +uniform vec4 gamma; +uniform vec4 lightnorm; +uniform vec4 sunlight_color; +uniform vec4 ambient; +uniform vec4 blue_horizon; +uniform vec4 blue_density; +uniform float haze_horizon; +uniform float haze_density; +uniform float cloud_shadow; +uniform float density_multiplier; +uniform float distance_multiplier; +uniform float max_y; +uniform vec4 glow; +uniform float scene_light_strength; +uniform mat3 env_mat; +uniform mat3 ssao_effect_mat; + +uniform vec3 sun_dir; +VARYING vec2 vary_fragcoord; + +VARYING vec3 vary_position; + +vec3 vary_PositionEye; + +vec3 vary_SunlitColor; +vec3 vary_AmblitColor; +vec3 vary_AdditiveColor; +vec3 vary_AtmosAttenuation; + +uniform mat4 inv_proj; +uniform vec2 screen_res; + +uniform vec4 light_position[8]; +uniform vec3 light_direction[8]; +uniform vec3 light_attenuation[8]; +uniform vec3 light_diffuse[8]; + +#ifdef WATER_FOG +uniform vec4 waterPlane; +uniform vec4 waterFogColor; +uniform float waterFogDensity; +uniform float waterFogKS; + +vec4 applyWaterFogDeferred(vec3 pos, vec4 color) +{ + //normalize view vector + vec3 view = normalize(pos); + float es = -(dot(view, waterPlane.xyz)); + + //find intersection point with water plane and eye vector + + //get eye depth + float e0 = max(-waterPlane.w, 0.0); + + vec3 int_v = waterPlane.w > 0.0 ? view * waterPlane.w/es : vec3(0.0, 0.0, 0.0); + + //get object depth + float depth = length(pos - int_v); + + //get "thickness" of water + float l = max(depth, 0.1); + + float kd = waterFogDensity; + float ks = waterFogKS; + vec4 kc = waterFogColor; + + float F = 0.98; + + float t1 = -kd * pow(F, ks * e0); + float t2 = kd + ks * es; + float t3 = pow(F, t2*l) - 1.0; + + float L = min(t1/t2*t3, 1.0); + + float D = pow(0.98, l*kd); + + color.rgb = color.rgb * D + kc.rgb * L; + color.a = kc.a + color.a; + + return color; +} +#endif + +vec3 calcDirectionalLight(vec3 n, vec3 l) +{ + float a = max(dot(n,l),0.0); + return vec3(a,a,a); +} + + +vec3 calcPointLightOrSpotLight(vec3 light_col, vec3 npos, vec3 diffuse, vec4 spec, vec3 v, vec3 n, vec4 lp, vec3 ln, float la, float fa, float is_pointlight, inout float glare) +{ + //get light vector + vec3 lv = lp.xyz-v; + + //get distance + float d = length(lv); + + float da = 1.0; + + vec3 col = vec3(0,0,0); + + if (d > 0.0 && la > 0.0 && fa > 0.0) + { + //normalize light vector + lv = normalize(lv); + + //distance attenuation + float dist = d/la; + float dist_atten = clamp(1.0-(dist-1.0*(1.0-fa))/fa, 0.0, 1.0); + dist_atten *= dist_atten; + dist_atten *= 2.0; + + // spotlight coefficient. + float spot = max(dot(-ln, lv), is_pointlight); + da *= spot*spot; // GL_SPOT_EXPONENT=2 + + //angular attenuation + da *= max(dot(n, lv), 0.0); + + float lit = max(da * dist_atten, 0.0); + + col = light_col*lit*diffuse; + + if (spec.a > 0.0) + { + //vec3 ref = dot(pos+lv, norm); + vec3 h = normalize(lv+npos); + float nh = dot(n, h); + float nv = dot(n, npos); + float vh = dot(npos, h); + float sa = nh; + float fres = pow(1 - dot(h, npos), 5)*0.4+0.5; + + float gtdenom = 2 * nh; + float gt = max(0, min(gtdenom * nv / vh, gtdenom * da / vh)); + + if (nh > 0.0) + { + float scol = fres*texture2D(lightFunc, vec2(nh, spec.a)).r*gt/(nh*da); + vec3 speccol = lit*scol*light_col.rgb*spec.rgb; + col += speccol; + + float cur_glare = max(speccol.r, speccol.g); + cur_glare = max(cur_glare, speccol.b); + glare = max(glare, speccol.r); + glare += max(cur_glare, 0.0); + //col += spec.rgb; + } + } + } + + return max(col, vec3(0.0,0.0,0.0)); + +} + +vec4 getPosition_d(vec2 pos_screen, float depth) +{ + vec2 sc = pos_screen.xy*2.0; + sc /= screen_res; + sc -= vec2(1.0,1.0); + vec4 ndc = vec4(sc.x, sc.y, 2.0*depth-1.0, 1.0); + vec4 pos = inv_proj * ndc; + pos /= pos.w; + pos.w = 1.0; + return pos; +} + +#ifndef WATER_FOG +vec3 getPositionEye() +{ + return vary_PositionEye; +} +#endif + +vec3 getSunlitColor() +{ + return vary_SunlitColor; +} +vec3 getAmblitColor() +{ + return vary_AmblitColor; +} +vec3 getAdditiveColor() +{ + return vary_AdditiveColor; +} +vec3 getAtmosAttenuation() +{ + return vary_AtmosAttenuation; +} + +void setPositionEye(vec3 v) +{ + vary_PositionEye = v; +} + +void setSunlitColor(vec3 v) +{ + vary_SunlitColor = v; +} + +void setAmblitColor(vec3 v) +{ + vary_AmblitColor = v; +} + +void setAdditiveColor(vec3 v) +{ + vary_AdditiveColor = v; +} + +void setAtmosAttenuation(vec3 v) +{ + vary_AtmosAttenuation = v; +} + +void calcAtmospherics(vec3 inPositionEye, float ambFactor) { + + vec3 P = inPositionEye; + setPositionEye(P); + + vec3 tmpLightnorm = lightnorm.xyz; + + vec3 Pn = normalize(P); + float Plen = length(P); + + vec4 temp1 = vec4(0); + vec3 temp2 = vec3(0); + vec4 blue_weight; + vec4 haze_weight; + vec4 sunlight = sunlight_color; + vec4 light_atten; + + //sunlight attenuation effect (hue and brightness) due to atmosphere + //this is used later for sunlight modulation at various altitudes + light_atten = (blue_density + vec4(haze_density * 0.25)) * (density_multiplier * max_y); + //I had thought blue_density and haze_density should have equal weighting, + //but attenuation due to haze_density tends to seem too strong + + temp1 = blue_density + vec4(haze_density); + blue_weight = blue_density / temp1; + haze_weight = vec4(haze_density) / temp1; + + //(TERRAIN) compute sunlight from lightnorm only (for short rays like terrain) + temp2.y = max(0.0, tmpLightnorm.y); + temp2.y = 1. / temp2.y; + sunlight *= exp( - light_atten * temp2.y); + + // main atmospheric scattering line integral + temp2.z = Plen * density_multiplier; + + // Transparency (-> temp1) + // ATI Bugfix -- can't store temp1*temp2.z*distance_multiplier in a variable because the ati + // compiler gets confused. + temp1 = exp(-temp1 * temp2.z * distance_multiplier); + + //final atmosphere attenuation factor + setAtmosAttenuation(temp1.rgb); + + //compute haze glow + //(can use temp2.x as temp because we haven't used it yet) + temp2.x = dot(Pn, tmpLightnorm.xyz); + temp2.x = 1. - temp2.x; + //temp2.x is 0 at the sun and increases away from sun + temp2.x = max(temp2.x, .03); //was glow.y + //set a minimum "angle" (smaller glow.y allows tighter, brighter hotspot) + temp2.x *= glow.x; + //higher glow.x gives dimmer glow (because next step is 1 / "angle") + temp2.x = pow(temp2.x, glow.z); + //glow.z should be negative, so we're doing a sort of (1 / "angle") function + + //add "minimum anti-solar illumination" + temp2.x += .25; + + //increase ambient when there are more clouds + vec4 tmpAmbient = ambient + (vec4(1.) - ambient) * cloud_shadow * 0.5; + + /* decrease value and saturation (that in HSV, not HSL) for occluded areas + * // for HSV color/geometry used here, see http://gimp-savvy.com/BOOK/index.html?node52.html + * // The following line of code performs the equivalent of: + * float ambAlpha = tmpAmbient.a; + * float ambValue = dot(vec3(tmpAmbient), vec3(0.577)); // projection onto <1/rt(3), 1/rt(3), 1/rt(3)>, the neutral white-black axis + * vec3 ambHueSat = vec3(tmpAmbient) - vec3(ambValue); + * tmpAmbient = vec4(RenderSSAOEffect.valueFactor * vec3(ambValue) + RenderSSAOEffect.saturationFactor *(1.0 - ambFactor) * ambHueSat, ambAlpha); + */ + tmpAmbient = vec4(mix(ssao_effect_mat * tmpAmbient.rgb, tmpAmbient.rgb, ambFactor), tmpAmbient.a); + + //haze color + setAdditiveColor( + vec3(blue_horizon * blue_weight * (sunlight*(1.-cloud_shadow) + tmpAmbient) + + (haze_horizon * haze_weight) * (sunlight*(1.-cloud_shadow) * temp2.x + + tmpAmbient))); + + //brightness of surface both sunlight and ambient + setSunlitColor(vec3(sunlight * .5)); + setAmblitColor(vec3(tmpAmbient * .25)); + setAdditiveColor(getAdditiveColor() * vec3(1.0 - temp1)); +} + +vec3 atmosLighting(vec3 light) +{ + light *= getAtmosAttenuation().r; + light += getAdditiveColor(); + return (2.0 * light); +} + +vec3 atmosTransport(vec3 light) { + light *= getAtmosAttenuation().r; + light += getAdditiveColor() * 2.0; + return light; +} +vec3 atmosGetDiffuseSunlightColor() +{ + return getSunlitColor(); +} + +vec3 scaleDownLight(vec3 light) +{ + return (light / vec3(scene_light_strength, scene_light_strength, scene_light_strength)); +} + +vec3 scaleUpLight(vec3 light) +{ + return (light * vec3(scene_light_strength, scene_light_strength, scene_light_strength)); +} + +vec3 atmosAmbient(vec3 light) +{ + return getAmblitColor() + (light * vec3(0.5f, 0.5f, 0.5f)); +} + +vec3 atmosAffectDirectionalLight(float lightIntensity) +{ + return getSunlitColor() * vec3(lightIntensity, lightIntensity, lightIntensity); +} + +vec3 scaleSoftClip(vec3 light) +{ + //soft clip effect: + vec3 zeroes = vec3(0.0f, 0.0f, 0.0f); + vec3 ones = vec3(1.0f, 1.0f, 1.0f); + + light = ones - clamp(light, zeroes, ones); + light = ones - pow(light, gamma.xxx); + + return light; +} + +vec3 fullbrightAtmosTransport(vec3 light) { + float brightness = dot(light.rgb, vec3(0.33333)); + + return mix(atmosTransport(light.rgb), light.rgb + getAdditiveColor().rgb, brightness * brightness); +} + +vec3 fullbrightScaleSoftClip(vec3 light) +{ + //soft clip effect: + return light; +} + +#else +#ifdef DEFINE_GL_FRAGCOLOR +out vec4 frag_data[3]; +#else +#define frag_data gl_FragData +#endif +#endif + +uniform sampler2D diffuseMap; + +#if HAS_NORMAL_MAP +uniform sampler2D bumpMap; +#endif + +#if HAS_SPECULAR_MAP +uniform sampler2D specularMap; + +VARYING vec2 vary_texcoord2; +#endif + +uniform float env_intensity; +uniform vec4 specular_color; // specular color RGB and specular exponent (glossiness) in alpha + +#if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_MASK) +uniform float minimum_alpha; +#endif + +#if HAS_NORMAL_MAP +VARYING vec3 vary_mat0; +VARYING vec3 vary_mat1; +VARYING vec3 vary_mat2; +VARYING vec2 vary_texcoord1; +#else +VARYING vec3 vary_normal; +#endif + +VARYING vec4 vertex_color; +VARYING vec2 vary_texcoord0; + +vec2 encode_normal(vec3 n) +{ + float f = sqrt(8 * n.z + 8); + return n.xy / f + 0.5; +} + +vec3 decode_normal (vec2 enc) +{ + vec2 fenc = enc*4-2; + float f = dot(fenc,fenc); + float g = sqrt(1-f/4); + vec3 n; + n.xy = fenc*g; + n.z = 1-f/2; + return n; +} + +void main() +{ + vec4 diffcol = texture2D(diffuseMap, vary_texcoord0.xy); + diffcol.rgb *= vertex_color.rgb; + +#if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_MASK) + if (diffcol.a < minimum_alpha) + { + discard; + } +#endif + +#if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_BLEND) + vec3 gamma_diff = diffcol.rgb; + diffcol.rgb = srgb_to_linear(diffcol.rgb); +#endif + +#if HAS_SPECULAR_MAP + vec4 spec = texture2D(specularMap, vary_texcoord2.xy); + spec.rgb *= specular_color.rgb; +#else + vec4 spec = vec4(specular_color.rgb, 1.0); +#endif + +#if HAS_NORMAL_MAP + vec4 norm = texture2D(bumpMap, vary_texcoord1.xy); + + norm.xyz = norm.xyz * 2 - 1; + + vec3 tnorm = vec3(dot(norm.xyz,vary_mat0), + dot(norm.xyz,vary_mat1), + dot(norm.xyz,vary_mat2)); +#else + vec4 norm = vec4(0,0,0,1.0); + vec3 tnorm = vary_normal; +#endif + + norm.xyz = tnorm; + norm.xyz = normalize(norm.xyz); + + vec2 abnormal = encode_normal(norm.xyz); + norm.xyz = decode_normal(abnormal.xy); + + vec4 final_color = diffcol; + +#if (DIFFUSE_ALPHA_MODE != DIFFUSE_ALPHA_MODE_EMISSIVE) + final_color.a = emissive_brightness; +#else + final_color.a = max(final_color.a, emissive_brightness); +#endif + + vec4 final_specular = spec; +#if HAS_SPECULAR_MAP + vec4 final_normal = vec4(encode_normal(normalize(tnorm)), env_intensity * spec.a, 0.0); + final_specular.a = specular_color.a * norm.a; +#else + vec4 final_normal = vec4(encode_normal(normalize(tnorm)), env_intensity, 0.0); + final_specular.a = specular_color.a; +#endif + + +#if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_BLEND) + //forward rendering, output just lit RGBA + vec3 pos = vary_position; + +#if HAS_SUN_SHADOW + float shadow = 0.0; + + vec4 spos = vec4(pos,1.0); + + if (spos.z > -shadow_clip.w) + { + vec4 lpos; + + vec4 near_split = shadow_clip*-0.75; + vec4 far_split = shadow_clip*-1.25; + vec4 transition_domain = near_split-far_split; + float weight = 0.0; + + if (spos.z < near_split.z) + { + lpos = shadow_matrix[3]*spos; + + float w = 1.0; + w -= max(spos.z-far_split.z, 0.0)/transition_domain.z; + shadow += pcfShadow(shadowMap3, lpos)*w; + weight += w; + shadow += max((pos.z+shadow_clip.z)/(shadow_clip.z-shadow_clip.w)*2.0-1.0, 0.0); + } + + if (spos.z < near_split.y && spos.z > far_split.z) + { + lpos = shadow_matrix[2]*spos; + + float w = 1.0; + w -= max(spos.z-far_split.y, 0.0)/transition_domain.y; + w -= max(near_split.z-spos.z, 0.0)/transition_domain.z; + shadow += pcfShadow(shadowMap2, lpos)*w; + weight += w; + } + + if (spos.z < near_split.x && spos.z > far_split.y) + { + lpos = shadow_matrix[1]*spos; + + float w = 1.0; + w -= max(spos.z-far_split.x, 0.0)/transition_domain.x; + w -= max(near_split.y-spos.z, 0.0)/transition_domain.y; + shadow += pcfShadow(shadowMap1, lpos)*w; + weight += w; + } + + if (spos.z > far_split.x) + { + lpos = shadow_matrix[0]*spos; + + float w = 1.0; + w -= max(near_split.x-spos.z, 0.0)/transition_domain.x; + + shadow += pcfShadow(shadowMap0, lpos)*w; + weight += w; + } + + + shadow /= weight; + } + else + { + shadow = 1.0; + } +#else + float shadow = 1.0; +#endif + + spec = final_specular; + vec4 diffuse = final_color; + float envIntensity = final_normal.z; + + vec3 col = vec3(0.0f,0.0f,0.0f); + + float bloom = 0.0; + calcAtmospherics(pos.xyz, 1.0); + + vec3 refnormpersp = normalize(reflect(pos.xyz, norm.xyz)); + + float da =dot(norm.xyz, sun_dir.xyz); + + float final_da = da; + final_da = min(final_da, shadow); + //final_da = max(final_da, diffuse.a); + final_da = max(final_da, 0.0f); + final_da = min(final_da, 1.0f); + final_da = pow(final_da, 1.0/1.3); + + col.rgb = atmosAmbient(col); + + float ambient = min(abs(da), 1.0); + ambient *= 0.5; + ambient *= ambient; + ambient = (1.0-ambient); + + col.rgb *= ambient; + + col.rgb = col.rgb + atmosAffectDirectionalLight(final_da); + + col.rgb *= gamma_diff.rgb; + + + float glare = 0.0; + + if (spec.a > 0.0) // specular reflection + { + // the old infinite-sky shiny reflection + // + + float sa = dot(refnormpersp, sun_dir.xyz); + vec3 dumbshiny = vary_SunlitColor*shadow*(texture2D(lightFunc, vec2(sa, spec.a)).r); + + // add the two types of shiny together + vec3 spec_contrib = dumbshiny * spec.rgb; + bloom = dot(spec_contrib, spec_contrib) / 6; + + glare = max(spec_contrib.r, spec_contrib.g); + glare = max(glare, spec_contrib.b); + + col += spec_contrib; + } + + + col = mix(col.rgb, diffcol.rgb, diffuse.a); + + if (envIntensity > 0.0) + { + //add environmentmap + vec3 env_vec = env_mat * refnormpersp; + + vec3 refcol = textureCube(environmentMap, env_vec).rgb; + + col = mix(col.rgb, refcol, + envIntensity); + + float cur_glare = max(refcol.r, refcol.g); + cur_glare = max(cur_glare, refcol.b); + cur_glare *= envIntensity*4.0; + glare += cur_glare; + } + + //col = mix(atmosLighting(col), fullbrightAtmosTransport(col), diffuse.a); + //col = mix(scaleSoftClip(col), fullbrightScaleSoftClip(col), diffuse.a); + + col = atmosLighting(col); + col = scaleSoftClip(col); + + //convert to linear space before adding local lights + col = srgb_to_linear(col); + + vec3 npos = normalize(-pos.xyz); + + vec3 light = vec3(0,0,0); + + #define LIGHT_LOOP(i) light.rgb += calcPointLightOrSpotLight(light_diffuse[i].rgb, npos, diffuse.rgb, final_specular, pos.xyz, norm.xyz, light_position[i], light_direction[i].xyz, light_attenuation[i].x, light_attenuation[i].y, light_attenuation[i].z, glare); + + LIGHT_LOOP(1) + LIGHT_LOOP(2) + LIGHT_LOOP(3) + LIGHT_LOOP(4) + LIGHT_LOOP(5) + LIGHT_LOOP(6) + LIGHT_LOOP(7) + + col.rgb += light.rgb; + + glare = min(glare, 1.0); + float al = max(diffcol.a,glare)*vertex_color.a; + + //convert to gamma space for display on screen + col.rgb = linear_to_srgb(col.rgb); + +#ifdef WATER_FOG + vec4 temp = applyWaterFogDeferred(pos, vec4(col.rgb, al)); + col.rgb = temp.rgb; + al = temp.a; +#endif + + frag_color.rgb = col.rgb; + frag_color.a = al; + +#else + frag_data[0] = final_color; + frag_data[1] = final_specular; // XYZ = Specular color. W = Specular exponent. + frag_data[2] = final_normal; // XY = Normal. Z = Env. intensity. +#endif +} + |