diff options
Diffstat (limited to 'indra/llcommon/llunits.h')
| -rw-r--r-- | indra/llcommon/llunits.h | 129 |
1 files changed, 129 insertions, 0 deletions
diff --git a/indra/llcommon/llunits.h b/indra/llcommon/llunits.h new file mode 100644 index 0000000000..0fcb8281a0 --- /dev/null +++ b/indra/llcommon/llunits.h @@ -0,0 +1,129 @@ +/** + * @file llunits.h + * @brief Unit definitions + * + * $LicenseInfo:firstyear=2001&license=viewerlgpl$ + * Second Life Viewer Source Code + * Copyright (C) 2012, Linden Research, Inc. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; + * version 2.1 of the License only. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + * + * Linden Research, Inc., 945 Battery Street, San Francisco, CA 94111 USA + * $/LicenseInfo$ + */ + +#ifndef LL_LLUNITTYPE_H +#define LL_LLUNITTYPE_H + +#include "stdtypes.h" +#include "llunittype.h" + +// +// Unit declarations +// + +namespace LLUnits +{ +LL_DECLARE_BASE_UNIT(Bytes, "B"); +// technically, these are kibibytes, mibibytes, etc. but we should stick with commonly accepted terminology +LL_DECLARE_DERIVED_UNIT(Kilobytes, "KB", Bytes, / 1024); +LL_DECLARE_DERIVED_UNIT(Megabytes, "MB", Kilobytes, / 1024); +LL_DECLARE_DERIVED_UNIT(Gigabytes, "GB", Megabytes, / 1024); +} + +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Bytes); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Kilobytes); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Megabytes); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Gigabytes); + +namespace LLUnits +{ +// technically, these are kibibits, mibibits, etc. but we should stick with commonly accepted terminology +LL_DECLARE_DERIVED_UNIT(Bits, "b", Bytes, * 8 ); +LL_DECLARE_DERIVED_UNIT(Kilobits, "Kb", Bits, / 1024); +LL_DECLARE_DERIVED_UNIT(Megabits, "Mb", Kilobits, / 1024); +LL_DECLARE_DERIVED_UNIT(Gigabits, "Gb", Megabits, / 1024); +} + +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Bits); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Kilobits); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Megabits); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Gigabits); + +namespace LLUnits +{ +LL_DECLARE_BASE_UNIT(Seconds, "s"); +LL_DECLARE_DERIVED_UNIT(Minutes, "min", Seconds, / 60); +LL_DECLARE_DERIVED_UNIT(Hours, "h", Minutes, / 60); +LL_DECLARE_DERIVED_UNIT(Days, "d", Hours, / 24); +LL_DECLARE_DERIVED_UNIT(Milliseconds, "ms", Seconds, * 1000); +LL_DECLARE_DERIVED_UNIT(Microseconds, "\x09\x3cs", Milliseconds, * 1000); +LL_DECLARE_DERIVED_UNIT(Nanoseconds, "ns", Microseconds, * 1000); +} + +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Seconds); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Minutes); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Hours); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Days); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Milliseconds); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Microseconds); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Nanoseconds); + +namespace LLUnits +{ +LL_DECLARE_BASE_UNIT(Meters, "m"); +LL_DECLARE_DERIVED_UNIT(Kilometers, "km", Meters, / 1000); +LL_DECLARE_DERIVED_UNIT(Centimeters, "cm", Meters, * 100); +LL_DECLARE_DERIVED_UNIT(Millimeters, "mm", Meters, * 1000); +} + +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Meters); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Kilometers); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Centimeters); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Millimeters); + +namespace LLUnits +{ +// rare units +LL_DECLARE_BASE_UNIT(Hertz, "Hz"); +LL_DECLARE_DERIVED_UNIT(Kilohertz, "KHz", Hertz, / 1000); +LL_DECLARE_DERIVED_UNIT(Megahertz, "MHz", Kilohertz, / 1000); +LL_DECLARE_DERIVED_UNIT(Gigahertz, "GHz", Megahertz, / 1000); + +LL_DECLARE_BASE_UNIT(Radians, "rad"); +LL_DECLARE_DERIVED_UNIT(Degrees, "deg", Radians, * 57.29578f); + +LL_DECLARE_BASE_UNIT(Percent, "%"); +LL_DECLARE_DERIVED_UNIT(Ratio, "x", Percent, / 100); + +LL_DECLARE_BASE_UNIT(Triangles, "tris"); +LL_DECLARE_DERIVED_UNIT(Kilotriangles, "ktris", Triangles, / 1000); + +} // namespace LLUnits + +// rare units +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Hertz); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Kilohertz); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Megahertz); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Gigahertz); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Radians); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Degrees); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Percent); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Ratio); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Triangles); +LL_DECLARE_UNIT_TYPEDEFS(LLUnits, Kilotriangles); + + +#endif // LL_LLUNITTYPE_H |