SL-18190 WIP -- Take 2 on linear space windlight (more methodical approach -- make desired interface but brute force color conversions). Placeholder PBR water and move to deprecate forward rendering shaders.

2 files changed, 14 insertions, 103 deletions

diff --git a/indra/newview/app_settings/shaders/class1/windlight/atmosphericsFuncs.glsl b/indra/newview/app_settings/shaders/class1/windlight/atmosphericsFuncs.glsl
index 3831eeaa01..28d1ae2027 100644
--- a/indra/newview/app_settings/shaders/class1/windlight/atmosphericsFuncs.glsl
+++ b/indra/newview/app_settings/shaders/class1/windlight/atmosphericsFuncs.glsl
@@ -22,24 +22,8 @@
  * Linden Research, Inc., 945 Battery Street, San Francisco, CA  94111  USA
  * $/LicenseInfo$
  */
-uniform vec4  lightnorm;
-uniform vec4  sunlight_color;
-uniform vec4  moonlight_color;
-uniform int   sun_up_factor;
-uniform vec4  ambient_color;
-uniform vec4  blue_horizon;
-uniform vec4  blue_density;
-uniform float haze_horizon;
-uniform float haze_density;
-uniform float cloud_shadow;
-uniform float density_multiplier;
-uniform float distance_multiplier;
-uniform float max_y;
-uniform vec4  glow;
-uniform float scene_light_strength;
-uniform mat3  ssao_effect_mat;
-uniform int   no_atmo;
-uniform float sun_moon_glow_factor;
+
+// debug stub
 
 float getAmbientClamp() { return 1.0f; }
 
@@ -47,89 +31,17 @@ float getAmbientClamp() { return 1.0f; }
 void calcAtmosphericVars(vec3 inPositionEye, vec3 light_dir, float ambFactor, out vec3 sunlit, out vec3 amblit, out vec3 additive,
                          out vec3 atten, bool use_ao)
 {
-    vec3 rel_pos = inPositionEye;
-
-    //(TERRAIN) limit altitude
-    if (abs(rel_pos.y) > max_y) rel_pos *= (max_y / rel_pos.y);
-
-    vec3  rel_pos_norm = normalize(rel_pos);
-    float rel_pos_len  = length(rel_pos);
-    vec4  sunlight     = (sun_up_factor == 1) ? sunlight_color : moonlight_color;
-
-    // sunlight attenuation effect (hue and brightness) due to atmosphere
-    // this is used later for sunlight modulation at various altitudes
-    vec4 light_atten = (blue_density + vec4(haze_density * 0.25)) * (density_multiplier * max_y);
-    // I had thought blue_density and haze_density should have equal weighting,
-    // but attenuation due to haze_density tends to seem too strong
-
-    vec4 combined_haze = blue_density + vec4(haze_density);
-    vec4 blue_weight   = blue_density / combined_haze;
-    vec4 haze_weight   = vec4(haze_density) / combined_haze;
-
-    //(TERRAIN) compute sunlight from lightnorm y component. Factor is roughly cosecant(sun elevation) (for short rays like terrain)
-    float above_horizon_factor = 1.0 / max(1e-6, lightnorm.y);
-    sunlight *= exp(-light_atten * above_horizon_factor);  // for sun [horizon..overhead] this maps to an exp curve [0..1]
-
-    // main atmospheric scattering line integral
-    float density_dist = rel_pos_len * density_multiplier;
-
-    // Transparency (-> combined_haze)
-    // ATI Bugfix -- can't store combined_haze*density_dist*distance_multiplier in a variable because the ati
-    // compiler gets confused.
-    combined_haze = exp(-combined_haze * density_dist * distance_multiplier);
-
-    // final atmosphere attenuation factor
-    atten = combined_haze.rgb;
-
-    // compute haze glow
-    float haze_glow = dot(rel_pos_norm, lightnorm.xyz);
-
-    // dampen sun additive contrib when not facing it...
-    // SL-13539: This "if" clause causes an "additive" white artifact at roughly 77 degreees.
-    //    if (length(light_dir) > 0.01)
-    haze_glow *= max(0.0f, dot(light_dir, rel_pos_norm));
-
-    haze_glow = 1. - haze_glow;
-    // haze_glow is 0 at the sun and increases away from sun
-    haze_glow = max(haze_glow, .001);  // set a minimum "angle" (smaller glow.y allows tighter, brighter hotspot)
-    haze_glow *= glow.x;
-    // higher glow.x gives dimmer glow (because next step is 1 / "angle")
-    haze_glow = pow(haze_glow, glow.z);
-    // glow.z should be negative, so we're doing a sort of (1 / "angle") function
-
-    // add "minimum anti-solar illumination"
-    haze_glow += .25;
-
-    haze_glow *= sun_moon_glow_factor;
-
-    vec4 amb_color = ambient_color;
-
-    // increase ambient when there are more clouds
-    vec4 tmpAmbient = amb_color + (vec4(1.) - amb_color) * cloud_shadow * 0.5;
-
-    /*  decrease value and saturation (that in HSV, not HSL) for occluded areas
-     * // for HSV color/geometry used here, see http://gimp-savvy.com/BOOK/index.html?node52.html
-     * // The following line of code performs the equivalent of:
-     * float ambAlpha = tmpAmbient.a;
-     * float ambValue = dot(vec3(tmpAmbient), vec3(0.577)); // projection onto <1/rt(3), 1/rt(3), 1/rt(3)>, the neutral white-black axis
-     * vec3 ambHueSat = vec3(tmpAmbient) - vec3(ambValue);
-     * tmpAmbient = vec4(RenderSSAOEffect.valueFactor * vec3(ambValue) + RenderSSAOEffect.saturationFactor *(1.0 - ambFactor) * ambHueSat,
-     * ambAlpha);
-     */
-    if (use_ao)
-    {
-        tmpAmbient = vec4(mix(ssao_effect_mat * tmpAmbient.rgb, tmpAmbient.rgb, ambFactor), tmpAmbient.a);
-    }
-
-    // Similar/Shared Algorithms:
-    //     indra\llinventory\llsettingssky.cpp                                        -- LLSettingsSky::calculateLightSettings()
-    //     indra\newview\app_settings\shaders\class1\windlight\atmosphericsFuncs.glsl -- calcAtmosphericVars()
-    // haze color
-    vec3 cs = sunlight.rgb * (1. - cloud_shadow);
-    additive = (blue_horizon.rgb * blue_weight.rgb) * (cs + tmpAmbient.rgb) + (haze_horizon * haze_weight.rgb) * (cs * haze_glow + tmpAmbient.rgb);
+    amblit = vec3(0.2, 0, 0.2);
+    sunlit = vec3(1,0,1);
+    additive = vec3(0.5,0.5,0.5);
+    atten = vec3(1,0,1);
+}
 
-    // brightness of surface both sunlight and ambient
-    sunlit = sunlight.rgb * 0.5;
-    amblit = tmpAmbient.rgb * .25;
-    additive *= vec3(1.0 - combined_haze);
+void calcAtmosphericVarsLinear(vec3 inPositionEye, vec3 light_dir, float ambFactor, out vec3 sunlit, out vec3 amblit, out vec3 additive,
+                         out vec3 atten, bool use_ao)
+{
+    amblit = vec3(0.2, 0, 0.2);
+    sunlit = vec3(1,0,1);
+    additive = vec3(0.5,0.5,0.5);
+    atten = vec3(1,0,1);
 }
diff --git a/indra/newview/app_settings/shaders/class1/windlight/cloudShadowF.glsl b/indra/newview/app_settings/shaders/class1/windlight/cloudShadowF.glsl
index 82fad4db5a..332fb9d809 100644
--- a/indra/newview/app_settings/shaders/class1/windlight/cloudShadowF.glsl
+++ b/indra/newview/app_settings/shaders/class1/windlight/cloudShadowF.glsl
@@ -45,7 +45,6 @@ uniform float blend_factor;
 uniform vec4 cloud_pos_density1;
 uniform vec4 cloud_pos_density2;
 uniform vec4 sunlight_color;
-uniform vec4 cloud_color;
 uniform float cloud_shadow;
 uniform float cloud_scale;
 uniform float cloud_variance;