#824 Process source files in bulk: replace tabs with spaces, convert CRLF to LF, and trim trailing whitespaces as needed

1 files changed, 423 insertions, 423 deletions

diff --git a/indra/llprimitive/llvolumemessage.cpp b/indra/llprimitive/llvolumemessage.cpp
index 8d47a7147f..804b208e3a 100644
--- a/indra/llprimitive/llvolumemessage.cpp
+++ b/indra/llprimitive/llvolumemessage.cpp
@@ -1,25 +1,25 @@
-/** 
+/**
  * @file llvolumemessage.cpp
  * @brief LLVolumeMessage base class
  *
  * $LicenseInfo:firstyear=2001&license=viewerlgpl$
  * Second Life Viewer Source Code
  * Copyright (C) 2010, Linden Research, Inc.
- * 
+ *
  * This library is free software; you can redistribute it and/or
  * modify it under the terms of the GNU Lesser General Public
  * License as published by the Free Software Foundation;
  * version 2.1 of the License only.
- * 
+ *
  * This library is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * Lesser General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU Lesser General Public
  * License along with this library; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- * 
+ *
  * Linden Research, Inc., 945 Battery Street, San Francisco, CA  94111  USA
  * $/LicenseInfo$
  */
@@ -37,164 +37,164 @@
 //============================================================================
 
 bool LLVolumeMessage::packProfileParams(
-	const LLProfileParams* params,
-	LLMessageSystem *mesgsys)
+    const LLProfileParams* params,
+    LLMessageSystem *mesgsys)
 {
-	// Default to cylinder
-	static LLProfileParams defaultparams(LL_PCODE_PROFILE_CIRCLE, U16(0), U16(0), U16(0));
-	
-	if (!params)
-		params = &defaultparams;
-	
-	U8 tempU8;
-	U16 tempU16;
-	
-	tempU8 = params->getCurveType();
-	mesgsys->addU8Fast(_PREHASH_ProfileCurve, tempU8);
-
-	tempU16 = (U16) ll_round( params->getBegin() / CUT_QUANTA);
-	mesgsys->addU16Fast(_PREHASH_ProfileBegin, tempU16);
-
-	tempU16 = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
-	mesgsys->addU16Fast(_PREHASH_ProfileEnd, tempU16);
-
-	tempU16 = (U16) ll_round(params->getHollow() / HOLLOW_QUANTA);
-	mesgsys->addU16Fast(_PREHASH_ProfileHollow, tempU16);
-
-	return true;
+    // Default to cylinder
+    static LLProfileParams defaultparams(LL_PCODE_PROFILE_CIRCLE, U16(0), U16(0), U16(0));
+
+    if (!params)
+        params = &defaultparams;
+
+    U8 tempU8;
+    U16 tempU16;
+
+    tempU8 = params->getCurveType();
+    mesgsys->addU8Fast(_PREHASH_ProfileCurve, tempU8);
+
+    tempU16 = (U16) ll_round( params->getBegin() / CUT_QUANTA);
+    mesgsys->addU16Fast(_PREHASH_ProfileBegin, tempU16);
+
+    tempU16 = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
+    mesgsys->addU16Fast(_PREHASH_ProfileEnd, tempU16);
+
+    tempU16 = (U16) ll_round(params->getHollow() / HOLLOW_QUANTA);
+    mesgsys->addU16Fast(_PREHASH_ProfileHollow, tempU16);
+
+    return true;
 }
 
 bool LLVolumeMessage::packProfileParams(
-	const LLProfileParams* params,
-	LLDataPacker &dp)
+    const LLProfileParams* params,
+    LLDataPacker &dp)
 {
-	// Default to cylinder
-	static LLProfileParams defaultparams(LL_PCODE_PROFILE_CIRCLE, U16(0), U16(0), U16(0));
-	
-	if (!params)
-		params = &defaultparams;
-	
-	U8 tempU8;
-	U16 tempU16;
-	
-	tempU8 = params->getCurveType();
-	dp.packU8(tempU8, "Curve");
-
-	tempU16 = (U16) ll_round( params->getBegin() / CUT_QUANTA);
-	dp.packU16(tempU16, "Begin");
-
-	tempU16 = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
-	dp.packU16(tempU16, "End");
-
-	tempU16 = (U16) ll_round(params->getHollow() / HOLLOW_QUANTA);
-	dp.packU16(tempU16, "Hollow");
-	return true;
+    // Default to cylinder
+    static LLProfileParams defaultparams(LL_PCODE_PROFILE_CIRCLE, U16(0), U16(0), U16(0));
+
+    if (!params)
+        params = &defaultparams;
+
+    U8 tempU8;
+    U16 tempU16;
+
+    tempU8 = params->getCurveType();
+    dp.packU8(tempU8, "Curve");
+
+    tempU16 = (U16) ll_round( params->getBegin() / CUT_QUANTA);
+    dp.packU16(tempU16, "Begin");
+
+    tempU16 = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
+    dp.packU16(tempU16, "End");
+
+    tempU16 = (U16) ll_round(params->getHollow() / HOLLOW_QUANTA);
+    dp.packU16(tempU16, "Hollow");
+    return true;
 }
 
 bool LLVolumeMessage::unpackProfileParams(
-	LLProfileParams* params,
-	LLMessageSystem* mesgsys,
-	char const* block_name,
-	S32 block_num)
+    LLProfileParams* params,
+    LLMessageSystem* mesgsys,
+    char const* block_name,
+    S32 block_num)
 {
-	bool ok = true;
-	U8 temp_u8;
-	U16 temp_u16;
-	F32 temp_f32;
-
-	mesgsys->getU8Fast(block_name, _PREHASH_ProfileCurve, temp_u8, block_num);
-	params->setCurveType(temp_u8);
-
-	mesgsys->getU16Fast(block_name, _PREHASH_ProfileBegin, temp_u16, block_num);
-	temp_f32 = temp_u16 * CUT_QUANTA;
-	if (temp_f32 > 1.f)
-	{
-		LL_WARNS() << "Profile begin out of range: " << temp_f32
-			<< ". Clamping to 0.0." << LL_ENDL;
-		temp_f32 = 0.f;
-		ok = false;
-	}
-	params->setBegin(temp_f32);
-
-	mesgsys->getU16Fast(block_name, _PREHASH_ProfileEnd, temp_u16, block_num);
-	temp_f32 = temp_u16 * CUT_QUANTA;
-	if (temp_f32 > 1.f)
-	{
-		LL_WARNS() << "Profile end out of range: " << 1.f - temp_f32
-			<< ". Clamping to 1.0." << LL_ENDL;
-		temp_f32 = 1.f;
-		ok = false;
-	}
-	params->setEnd(1.f - temp_f32);
-
-	mesgsys->getU16Fast(block_name, _PREHASH_ProfileHollow, temp_u16, block_num);
-	temp_f32 = temp_u16 * HOLLOW_QUANTA;
-	if (temp_f32 > 1.f)
-	{
-		LL_WARNS() << "Profile hollow out of range: " << temp_f32
-			<< ". Clamping to 0.0." << LL_ENDL;
-		temp_f32 = 0.f;
-		ok = false;
-	}
-	params->setHollow(temp_f32);
-
-	/*
-	LL_INFOS() << "Unpacking Profile Block " << block_num << LL_ENDL;
-	LL_INFOS() << "Curve:     " << (U32)getCurve() << LL_ENDL;
-	LL_INFOS() << "Begin:     " << getBegin() << LL_ENDL;
-	LL_INFOS() << "End:     " << getEnd() << LL_ENDL;
-	LL_INFOS() << "Hollow:     " << getHollow() << LL_ENDL;
-	*/
-	return ok;
+    bool ok = true;
+    U8 temp_u8;
+    U16 temp_u16;
+    F32 temp_f32;
+
+    mesgsys->getU8Fast(block_name, _PREHASH_ProfileCurve, temp_u8, block_num);
+    params->setCurveType(temp_u8);
+
+    mesgsys->getU16Fast(block_name, _PREHASH_ProfileBegin, temp_u16, block_num);
+    temp_f32 = temp_u16 * CUT_QUANTA;
+    if (temp_f32 > 1.f)
+    {
+        LL_WARNS() << "Profile begin out of range: " << temp_f32
+            << ". Clamping to 0.0." << LL_ENDL;
+        temp_f32 = 0.f;
+        ok = false;
+    }
+    params->setBegin(temp_f32);
+
+    mesgsys->getU16Fast(block_name, _PREHASH_ProfileEnd, temp_u16, block_num);
+    temp_f32 = temp_u16 * CUT_QUANTA;
+    if (temp_f32 > 1.f)
+    {
+        LL_WARNS() << "Profile end out of range: " << 1.f - temp_f32
+            << ". Clamping to 1.0." << LL_ENDL;
+        temp_f32 = 1.f;
+        ok = false;
+    }
+    params->setEnd(1.f - temp_f32);
+
+    mesgsys->getU16Fast(block_name, _PREHASH_ProfileHollow, temp_u16, block_num);
+    temp_f32 = temp_u16 * HOLLOW_QUANTA;
+    if (temp_f32 > 1.f)
+    {
+        LL_WARNS() << "Profile hollow out of range: " << temp_f32
+            << ". Clamping to 0.0." << LL_ENDL;
+        temp_f32 = 0.f;
+        ok = false;
+    }
+    params->setHollow(temp_f32);
+
+    /*
+    LL_INFOS() << "Unpacking Profile Block " << block_num << LL_ENDL;
+    LL_INFOS() << "Curve:     " << (U32)getCurve() << LL_ENDL;
+    LL_INFOS() << "Begin:     " << getBegin() << LL_ENDL;
+    LL_INFOS() << "End:     " << getEnd() << LL_ENDL;
+    LL_INFOS() << "Hollow:     " << getHollow() << LL_ENDL;
+    */
+    return ok;
 
 }
 
 bool LLVolumeMessage::unpackProfileParams(
-	LLProfileParams* params,
-	LLDataPacker &dp)
+    LLProfileParams* params,
+    LLDataPacker &dp)
 {
-	bool ok = true;
-	U8 temp_u8;
-	U16 temp_u16;
-	F32 temp_f32;
-
-	dp.unpackU8(temp_u8, "Curve");
-	params->setCurveType(temp_u8);
-
-	dp.unpackU16(temp_u16, "Begin");
-	temp_f32 = temp_u16 * CUT_QUANTA;
-	if (temp_f32 > 1.f)
-	{
-		LL_WARNS() << "Profile begin out of range: " << temp_f32 << LL_ENDL;
-		LL_WARNS() << "Clamping to 0.0" << LL_ENDL;
-		temp_f32 = 0.f;
-		ok = false;
-	}
-	params->setBegin(temp_f32);
-
-	dp.unpackU16(temp_u16, "End");
-	temp_f32 = temp_u16 * CUT_QUANTA;
-	if (temp_f32 > 1.f)
-	{
-		LL_WARNS() << "Profile end out of range: " << 1.f - temp_f32 << LL_ENDL;
-		LL_WARNS() << "Clamping to 1.0" << LL_ENDL;
-		temp_f32 = 1.f;
-		ok = false;
-	}
-	params->setEnd(1.f - temp_f32);
-
-	dp.unpackU16(temp_u16, "Hollow");
-	temp_f32 = temp_u16 * HOLLOW_QUANTA;
-	if (temp_f32 > 1.f)
-	{
-		LL_WARNS() << "Profile hollow out of range: " << temp_f32 << LL_ENDL;
-		LL_WARNS() << "Clamping to 0.0" << LL_ENDL;
-		temp_f32 = 0.f;
-		ok = false;
-	}
-	params->setHollow(temp_f32);
-
-	return ok;
+    bool ok = true;
+    U8 temp_u8;
+    U16 temp_u16;
+    F32 temp_f32;
+
+    dp.unpackU8(temp_u8, "Curve");
+    params->setCurveType(temp_u8);
+
+    dp.unpackU16(temp_u16, "Begin");
+    temp_f32 = temp_u16 * CUT_QUANTA;
+    if (temp_f32 > 1.f)
+    {
+        LL_WARNS() << "Profile begin out of range: " << temp_f32 << LL_ENDL;
+        LL_WARNS() << "Clamping to 0.0" << LL_ENDL;
+        temp_f32 = 0.f;
+        ok = false;
+    }
+    params->setBegin(temp_f32);
+
+    dp.unpackU16(temp_u16, "End");
+    temp_f32 = temp_u16 * CUT_QUANTA;
+    if (temp_f32 > 1.f)
+    {
+        LL_WARNS() << "Profile end out of range: " << 1.f - temp_f32 << LL_ENDL;
+        LL_WARNS() << "Clamping to 1.0" << LL_ENDL;
+        temp_f32 = 1.f;
+        ok = false;
+    }
+    params->setEnd(1.f - temp_f32);
+
+    dp.unpackU16(temp_u16, "Hollow");
+    temp_f32 = temp_u16 * HOLLOW_QUANTA;
+    if (temp_f32 > 1.f)
+    {
+        LL_WARNS() << "Profile hollow out of range: " << temp_f32 << LL_ENDL;
+        LL_WARNS() << "Clamping to 0.0" << LL_ENDL;
+        temp_f32 = 0.f;
+        ok = false;
+    }
+    params->setHollow(temp_f32);
+
+    return ok;
 }
 
 //============================================================================
@@ -206,248 +206,248 @@ bool LLVolumeMessage::unpackProfileParams(
 // For shear, range is -0.5 to 0.5, quanta is 0.01, 0 maps to 0
 // For taper, range is -1 to 1, quanta is 0.01, 0 maps to 0
 bool LLVolumeMessage::packPathParams(
-	const LLPathParams* params,
-	LLMessageSystem *mesgsys)
+    const LLPathParams* params,
+    LLMessageSystem *mesgsys)
 {
-	// Default to cylinder with no cut, top same size as bottom, no shear, no twist
-	static LLPathParams defaultparams(LL_PCODE_PATH_LINE, U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), 0);
-	if (!params)
-		params = &defaultparams;
-	
-	U8 curve = params->getCurveType();
-	mesgsys->addU8Fast(_PREHASH_PathCurve, curve);
+    // Default to cylinder with no cut, top same size as bottom, no shear, no twist
+    static LLPathParams defaultparams(LL_PCODE_PATH_LINE, U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), 0);
+    if (!params)
+        params = &defaultparams;
 
-	U16 begin = (U16) ll_round(params->getBegin() / CUT_QUANTA);
-	mesgsys->addU16Fast(_PREHASH_PathBegin, begin);
+    U8 curve = params->getCurveType();
+    mesgsys->addU8Fast(_PREHASH_PathCurve, curve);
 
-	U16 end = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
-	mesgsys->addU16Fast(_PREHASH_PathEnd, end);
+    U16 begin = (U16) ll_round(params->getBegin() / CUT_QUANTA);
+    mesgsys->addU16Fast(_PREHASH_PathBegin, begin);
 
-	// Avoid truncation problem with direct F32->U8 cast.
-	// (e.g., (U8) (0.50 / 0.01) = (U8) 49.9999999 = 49 not 50.
+    U16 end = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
+    mesgsys->addU16Fast(_PREHASH_PathEnd, end);
 
-	U8 pack_scale_x = 200 - (U8) ll_round(params->getScaleX() / SCALE_QUANTA);
-	mesgsys->addU8Fast(_PREHASH_PathScaleX, pack_scale_x );
+    // Avoid truncation problem with direct F32->U8 cast.
+    // (e.g., (U8) (0.50 / 0.01) = (U8) 49.9999999 = 49 not 50.
 
-	U8 pack_scale_y = 200 - (U8) ll_round(params->getScaleY() / SCALE_QUANTA);
-	mesgsys->addU8Fast(_PREHASH_PathScaleY, pack_scale_y );
+    U8 pack_scale_x = 200 - (U8) ll_round(params->getScaleX() / SCALE_QUANTA);
+    mesgsys->addU8Fast(_PREHASH_PathScaleX, pack_scale_x );
 
-	U8 pack_shear_x = (U8) ll_round(params->getShearX() / SHEAR_QUANTA);
-	mesgsys->addU8Fast(_PREHASH_PathShearX, pack_shear_x );
+    U8 pack_scale_y = 200 - (U8) ll_round(params->getScaleY() / SCALE_QUANTA);
+    mesgsys->addU8Fast(_PREHASH_PathScaleY, pack_scale_y );
 
-	U8 pack_shear_y = (U8) ll_round(params->getShearY() / SHEAR_QUANTA);
-	mesgsys->addU8Fast(_PREHASH_PathShearY, pack_shear_y );
+    U8 pack_shear_x = (U8) ll_round(params->getShearX() / SHEAR_QUANTA);
+    mesgsys->addU8Fast(_PREHASH_PathShearX, pack_shear_x );
 
-	S8 twist = (S8) ll_round(params->getTwist() / SCALE_QUANTA);
-	mesgsys->addS8Fast(_PREHASH_PathTwist, twist);
+    U8 pack_shear_y = (U8) ll_round(params->getShearY() / SHEAR_QUANTA);
+    mesgsys->addU8Fast(_PREHASH_PathShearY, pack_shear_y );
 
-	S8 twist_begin = (S8) ll_round(params->getTwistBegin() / SCALE_QUANTA);
-	mesgsys->addS8Fast(_PREHASH_PathTwistBegin, twist_begin);
+    S8 twist = (S8) ll_round(params->getTwist() / SCALE_QUANTA);
+    mesgsys->addS8Fast(_PREHASH_PathTwist, twist);
 
-	S8 radius_offset = (S8) ll_round(params->getRadiusOffset() / SCALE_QUANTA);
-	mesgsys->addS8Fast(_PREHASH_PathRadiusOffset, radius_offset);
+    S8 twist_begin = (S8) ll_round(params->getTwistBegin() / SCALE_QUANTA);
+    mesgsys->addS8Fast(_PREHASH_PathTwistBegin, twist_begin);
 
-	S8 taper_x = (S8) ll_round(params->getTaperX() / TAPER_QUANTA);
-	mesgsys->addS8Fast(_PREHASH_PathTaperX, taper_x);
+    S8 radius_offset = (S8) ll_round(params->getRadiusOffset() / SCALE_QUANTA);
+    mesgsys->addS8Fast(_PREHASH_PathRadiusOffset, radius_offset);
 
-	S8 taper_y = (S8) ll_round(params->getTaperY() / TAPER_QUANTA);
-	mesgsys->addS8Fast(_PREHASH_PathTaperY, taper_y);
+    S8 taper_x = (S8) ll_round(params->getTaperX() / TAPER_QUANTA);
+    mesgsys->addS8Fast(_PREHASH_PathTaperX, taper_x);
 
-	U8 revolutions = (U8) ll_round( (params->getRevolutions() - 1.0f) / REV_QUANTA);
-	mesgsys->addU8Fast(_PREHASH_PathRevolutions, revolutions);
+    S8 taper_y = (S8) ll_round(params->getTaperY() / TAPER_QUANTA);
+    mesgsys->addS8Fast(_PREHASH_PathTaperY, taper_y);
 
-	S8 skew = (S8) ll_round(params->getSkew() / SCALE_QUANTA);
-	mesgsys->addS8Fast(_PREHASH_PathSkew, skew);
+    U8 revolutions = (U8) ll_round( (params->getRevolutions() - 1.0f) / REV_QUANTA);
+    mesgsys->addU8Fast(_PREHASH_PathRevolutions, revolutions);
 
-	return true;
+    S8 skew = (S8) ll_round(params->getSkew() / SCALE_QUANTA);
+    mesgsys->addS8Fast(_PREHASH_PathSkew, skew);
+
+    return true;
 }
 
 bool LLVolumeMessage::packPathParams(
-	const LLPathParams* params,
-	LLDataPacker &dp)
+    const LLPathParams* params,
+    LLDataPacker &dp)
 {
-	// Default to cylinder with no cut, top same size as bottom, no shear, no twist
-	static LLPathParams defaultparams(LL_PCODE_PATH_LINE, U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), 0);
-	if (!params)
-		params = &defaultparams;
-	
-	U8 curve = params->getCurveType();
-	dp.packU8(curve, "Curve");
+    // Default to cylinder with no cut, top same size as bottom, no shear, no twist
+    static LLPathParams defaultparams(LL_PCODE_PATH_LINE, U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), 0);
+    if (!params)
+        params = &defaultparams;
+
+    U8 curve = params->getCurveType();
+    dp.packU8(curve, "Curve");
 
-	U16 begin = (U16) ll_round(params->getBegin() / CUT_QUANTA);
-	dp.packU16(begin, "Begin");
+    U16 begin = (U16) ll_round(params->getBegin() / CUT_QUANTA);
+    dp.packU16(begin, "Begin");
 
-	U16 end = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
-	dp.packU16(end, "End");
+    U16 end = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
+    dp.packU16(end, "End");
 
-	// Avoid truncation problem with direct F32->U8 cast.
-	// (e.g., (U8) (0.50 / 0.01) = (U8) 49.9999999 = 49 not 50.
+    // Avoid truncation problem with direct F32->U8 cast.
+    // (e.g., (U8) (0.50 / 0.01) = (U8) 49.9999999 = 49 not 50.
 
-	U8 pack_scale_x = 200 - (U8) ll_round(params->getScaleX() / SCALE_QUANTA);
-	dp.packU8(pack_scale_x, "ScaleX");
+    U8 pack_scale_x = 200 - (U8) ll_round(params->getScaleX() / SCALE_QUANTA);
+    dp.packU8(pack_scale_x, "ScaleX");
 
-	U8 pack_scale_y = 200 - (U8) ll_round(params->getScaleY() / SCALE_QUANTA);
-	dp.packU8(pack_scale_y, "ScaleY");
+    U8 pack_scale_y = 200 - (U8) ll_round(params->getScaleY() / SCALE_QUANTA);
+    dp.packU8(pack_scale_y, "ScaleY");
 
-	S8 pack_shear_x = (S8) ll_round(params->getShearX() / SHEAR_QUANTA);
-	dp.packU8(*(U8 *)&pack_shear_x, "ShearX");
+    S8 pack_shear_x = (S8) ll_round(params->getShearX() / SHEAR_QUANTA);
+    dp.packU8(*(U8 *)&pack_shear_x, "ShearX");
 
-	S8 pack_shear_y = (S8) ll_round(params->getShearY() / SHEAR_QUANTA);
-	dp.packU8(*(U8 *)&pack_shear_y, "ShearY");
+    S8 pack_shear_y = (S8) ll_round(params->getShearY() / SHEAR_QUANTA);
+    dp.packU8(*(U8 *)&pack_shear_y, "ShearY");
 
-	S8 twist = (S8) ll_round(params->getTwist() / SCALE_QUANTA);
-	dp.packU8(*(U8 *)&twist, "Twist");
-	
-	S8 twist_begin = (S8) ll_round(params->getTwistBegin() / SCALE_QUANTA);
-	dp.packU8(*(U8 *)&twist_begin, "TwistBegin");
+    S8 twist = (S8) ll_round(params->getTwist() / SCALE_QUANTA);
+    dp.packU8(*(U8 *)&twist, "Twist");
 
-	S8 radius_offset = (S8) ll_round(params->getRadiusOffset() / SCALE_QUANTA);
-	dp.packU8(*(U8 *)&radius_offset, "RadiusOffset");
+    S8 twist_begin = (S8) ll_round(params->getTwistBegin() / SCALE_QUANTA);
+    dp.packU8(*(U8 *)&twist_begin, "TwistBegin");
 
-	S8 taper_x = (S8) ll_round(params->getTaperX() / TAPER_QUANTA);
-	dp.packU8(*(U8 *)&taper_x, "TaperX");
+    S8 radius_offset = (S8) ll_round(params->getRadiusOffset() / SCALE_QUANTA);
+    dp.packU8(*(U8 *)&radius_offset, "RadiusOffset");
 
-	S8 taper_y = (S8) ll_round(params->getTaperY() / TAPER_QUANTA);
-	dp.packU8(*(U8 *)&taper_y, "TaperY");
+    S8 taper_x = (S8) ll_round(params->getTaperX() / TAPER_QUANTA);
+    dp.packU8(*(U8 *)&taper_x, "TaperX");
 
-	U8 revolutions = (U8) ll_round( (params->getRevolutions() - 1.0f) / REV_QUANTA);
-	dp.packU8(*(U8 *)&revolutions, "Revolutions");
+    S8 taper_y = (S8) ll_round(params->getTaperY() / TAPER_QUANTA);
+    dp.packU8(*(U8 *)&taper_y, "TaperY");
 
-	S8 skew = (S8) ll_round(params->getSkew() / SCALE_QUANTA);
-	dp.packU8(*(U8 *)&skew, "Skew");
+    U8 revolutions = (U8) ll_round( (params->getRevolutions() - 1.0f) / REV_QUANTA);
+    dp.packU8(*(U8 *)&revolutions, "Revolutions");
 
-	return true;
+    S8 skew = (S8) ll_round(params->getSkew() / SCALE_QUANTA);
+    dp.packU8(*(U8 *)&skew, "Skew");
+
+    return true;
 }
 
 bool LLVolumeMessage::unpackPathParams(
-	LLPathParams* params,
-	LLMessageSystem* mesgsys,
-	char const* block_name,
-	S32 block_num)
+    LLPathParams* params,
+    LLMessageSystem* mesgsys,
+    char const* block_name,
+    S32 block_num)
 {
-	U8 curve;
-	mesgsys->getU8Fast(block_name, _PREHASH_PathCurve, curve, block_num);
-	params->setCurveType(curve);
-
-	U16 begin;
-	mesgsys->getU16Fast(block_name, _PREHASH_PathBegin, begin, block_num);
-	params->setBegin((F32)(begin * CUT_QUANTA));
-
-	U16 end;
-	mesgsys->getU16Fast(block_name, _PREHASH_PathEnd, end, block_num);
-	params->setEnd((F32)((50000 - end) * CUT_QUANTA));
-
-	U8 pack_scale_x, pack_scale_y;
-	mesgsys->getU8Fast(block_name, _PREHASH_PathScaleX, pack_scale_x, block_num);
-	mesgsys->getU8Fast(block_name, _PREHASH_PathScaleY, pack_scale_y, block_num);
-	F32 x = (F32) (200 - pack_scale_x) * SCALE_QUANTA;
-	F32 y = (F32) (200 - pack_scale_y) * SCALE_QUANTA;
-	params->setScale( x, y );
-
-	S8 shear_x_quant, shear_y_quant;
-	mesgsys->getS8Fast(block_name, _PREHASH_PathShearX, shear_x_quant, block_num);
-	mesgsys->getS8Fast(block_name, _PREHASH_PathShearY, shear_y_quant, block_num);
-	F32 shear_x = (F32) shear_x_quant * SHEAR_QUANTA;
-	F32 shear_y = (F32) shear_y_quant * SHEAR_QUANTA;
-	params->setShear( shear_x, shear_y );
-
-	S8 twist;
-	mesgsys->getS8Fast(block_name, _PREHASH_PathTwist, twist, block_num );
-	params->setTwist((F32)(twist * SCALE_QUANTA));
-
-	S8 twist_begin;
-	mesgsys->getS8Fast(block_name, _PREHASH_PathTwistBegin, twist_begin, block_num );
-	params->setTwistBegin((F32)(twist_begin * SCALE_QUANTA));
-	
-	S8 radius_offset;
-	mesgsys->getS8Fast(block_name, _PREHASH_PathRadiusOffset, radius_offset, block_num );
-	params->setRadiusOffset((F32)(radius_offset * SCALE_QUANTA));
-
-	S8 taper_x_quant, taper_y_quant;
-	mesgsys->getS8Fast(block_name, _PREHASH_PathTaperX, taper_x_quant, block_num );
-	mesgsys->getS8Fast(block_name, _PREHASH_PathTaperY, taper_y_quant, block_num );
-	F32 taper_x = (F32)(taper_x_quant * TAPER_QUANTA);
-	F32 taper_y = (F32)(taper_y_quant * TAPER_QUANTA);
-	params->setTaper( taper_x, taper_y );
-
-	U8 revolutions;
-	mesgsys->getU8Fast(block_name, _PREHASH_PathRevolutions, revolutions, block_num );
-	params->setRevolutions((F32)(revolutions * REV_QUANTA + 1.0f));
-
-	S8 skew;
-	mesgsys->getS8Fast(block_name, _PREHASH_PathSkew, skew, block_num );
-	params->setSkew((F32)(skew * SCALE_QUANTA));
+    U8 curve;
+    mesgsys->getU8Fast(block_name, _PREHASH_PathCurve, curve, block_num);
+    params->setCurveType(curve);
+
+    U16 begin;
+    mesgsys->getU16Fast(block_name, _PREHASH_PathBegin, begin, block_num);
+    params->setBegin((F32)(begin * CUT_QUANTA));
+
+    U16 end;
+    mesgsys->getU16Fast(block_name, _PREHASH_PathEnd, end, block_num);
+    params->setEnd((F32)((50000 - end) * CUT_QUANTA));
+
+    U8 pack_scale_x, pack_scale_y;
+    mesgsys->getU8Fast(block_name, _PREHASH_PathScaleX, pack_scale_x, block_num);
+    mesgsys->getU8Fast(block_name, _PREHASH_PathScaleY, pack_scale_y, block_num);
+    F32 x = (F32) (200 - pack_scale_x) * SCALE_QUANTA;
+    F32 y = (F32) (200 - pack_scale_y) * SCALE_QUANTA;
+    params->setScale( x, y );
+
+    S8 shear_x_quant, shear_y_quant;
+    mesgsys->getS8Fast(block_name, _PREHASH_PathShearX, shear_x_quant, block_num);
+    mesgsys->getS8Fast(block_name, _PREHASH_PathShearY, shear_y_quant, block_num);
+    F32 shear_x = (F32) shear_x_quant * SHEAR_QUANTA;
+    F32 shear_y = (F32) shear_y_quant * SHEAR_QUANTA;
+    params->setShear( shear_x, shear_y );
+
+    S8 twist;
+    mesgsys->getS8Fast(block_name, _PREHASH_PathTwist, twist, block_num );
+    params->setTwist((F32)(twist * SCALE_QUANTA));
+
+    S8 twist_begin;
+    mesgsys->getS8Fast(block_name, _PREHASH_PathTwistBegin, twist_begin, block_num );
+    params->setTwistBegin((F32)(twist_begin * SCALE_QUANTA));
+
+    S8 radius_offset;
+    mesgsys->getS8Fast(block_name, _PREHASH_PathRadiusOffset, radius_offset, block_num );
+    params->setRadiusOffset((F32)(radius_offset * SCALE_QUANTA));
+
+    S8 taper_x_quant, taper_y_quant;
+    mesgsys->getS8Fast(block_name, _PREHASH_PathTaperX, taper_x_quant, block_num );
+    mesgsys->getS8Fast(block_name, _PREHASH_PathTaperY, taper_y_quant, block_num );
+    F32 taper_x = (F32)(taper_x_quant * TAPER_QUANTA);
+    F32 taper_y = (F32)(taper_y_quant * TAPER_QUANTA);
+    params->setTaper( taper_x, taper_y );
+
+    U8 revolutions;
+    mesgsys->getU8Fast(block_name, _PREHASH_PathRevolutions, revolutions, block_num );
+    params->setRevolutions((F32)(revolutions * REV_QUANTA + 1.0f));
+
+    S8 skew;
+    mesgsys->getS8Fast(block_name, _PREHASH_PathSkew, skew, block_num );
+    params->setSkew((F32)(skew * SCALE_QUANTA));
 
 /*
-	LL_INFOS() << "Unpacking Path Block " << block_num << LL_ENDL;
-	LL_INFOS() << "Curve:     " << (U32)params->getCurve() << LL_ENDL;
-	LL_INFOS() << "Begin:     " << params->getBegin() << LL_ENDL;
-	LL_INFOS() << "End:     " << params->getEnd() << LL_ENDL;
-	LL_INFOS() << "Scale:     " << params->getScale() << LL_ENDL;
-	LL_INFOS() << "Twist:     " << params->getTwist() << LL_ENDL;
+    LL_INFOS() << "Unpacking Path Block " << block_num << LL_ENDL;
+    LL_INFOS() << "Curve:     " << (U32)params->getCurve() << LL_ENDL;
+    LL_INFOS() << "Begin:     " << params->getBegin() << LL_ENDL;
+    LL_INFOS() << "End:     " << params->getEnd() << LL_ENDL;
+    LL_INFOS() << "Scale:     " << params->getScale() << LL_ENDL;
+    LL_INFOS() << "Twist:     " << params->getTwist() << LL_ENDL;
 */
 
-	return true;
+    return true;
 
 }
 
 bool LLVolumeMessage::unpackPathParams(LLPathParams* params, LLDataPacker &dp)
 {
-	U8 value;
-	S8 svalue;
-	U16 temp_u16;
-	
-	dp.unpackU8(value, "Curve");
-	params->setCurveType( value );
-
-	dp.unpackU16(temp_u16, "Begin");
-	params->setBegin((F32)(temp_u16 * CUT_QUANTA));
-
-	dp.unpackU16(temp_u16, "End");
-	params->setEnd((F32)((50000 - temp_u16) * CUT_QUANTA));
-
-	dp.unpackU8(value, "ScaleX");
-	F32 x = (F32) (200 - value) * SCALE_QUANTA;
-	dp.unpackU8(value, "ScaleY");
-	F32 y = (F32) (200 - value) * SCALE_QUANTA;
-	params->setScale( x, y );
-
-	dp.unpackU8(value, "ShearX");
-	svalue = *(S8 *)&value;
-	F32 shear_x = (F32) svalue * SHEAR_QUANTA;
-	dp.unpackU8(value, "ShearY");
-	svalue = *(S8 *)&value;
-	F32 shear_y = (F32) svalue * SHEAR_QUANTA;
-	params->setShear( shear_x, shear_y );
-
-	dp.unpackU8(value, "Twist");
-	svalue = *(S8 *)&value;
-	params->setTwist((F32)(svalue * SCALE_QUANTA));
-
-	dp.unpackU8(value, "TwistBegin");
-	svalue = *(S8 *)&value;
-	params->setTwistBegin((F32)(svalue * SCALE_QUANTA));
-
-	dp.unpackU8(value, "RadiusOffset");
-	svalue = *(S8 *)&value;
-	params->setRadiusOffset((F32)(svalue * SCALE_QUANTA));
-
-	dp.unpackU8(value, "TaperX");
-	svalue = *(S8 *)&value;
-	params->setTaperX((F32)(svalue * TAPER_QUANTA));
-
-	dp.unpackU8(value, "TaperY");
-	svalue = *(S8 *)&value;
-	params->setTaperY((F32)(svalue * TAPER_QUANTA));
-
-	dp.unpackU8(value, "Revolutions");
-	params->setRevolutions((F32)(value * REV_QUANTA + 1.0f));
-
-	dp.unpackU8(value, "Skew");
-	svalue = *(S8 *)&value;
-	params->setSkew((F32)(svalue * SCALE_QUANTA));
-
-	return true;
+    U8 value;
+    S8 svalue;
+    U16 temp_u16;
+
+    dp.unpackU8(value, "Curve");
+    params->setCurveType( value );
+
+    dp.unpackU16(temp_u16, "Begin");
+    params->setBegin((F32)(temp_u16 * CUT_QUANTA));
+
+    dp.unpackU16(temp_u16, "End");
+    params->setEnd((F32)((50000 - temp_u16) * CUT_QUANTA));
+
+    dp.unpackU8(value, "ScaleX");
+    F32 x = (F32) (200 - value) * SCALE_QUANTA;
+    dp.unpackU8(value, "ScaleY");
+    F32 y = (F32) (200 - value) * SCALE_QUANTA;
+    params->setScale( x, y );
+
+    dp.unpackU8(value, "ShearX");
+    svalue = *(S8 *)&value;
+    F32 shear_x = (F32) svalue * SHEAR_QUANTA;
+    dp.unpackU8(value, "ShearY");
+    svalue = *(S8 *)&value;
+    F32 shear_y = (F32) svalue * SHEAR_QUANTA;
+    params->setShear( shear_x, shear_y );
+
+    dp.unpackU8(value, "Twist");
+    svalue = *(S8 *)&value;
+    params->setTwist((F32)(svalue * SCALE_QUANTA));
+
+    dp.unpackU8(value, "TwistBegin");
+    svalue = *(S8 *)&value;
+    params->setTwistBegin((F32)(svalue * SCALE_QUANTA));
+
+    dp.unpackU8(value, "RadiusOffset");
+    svalue = *(S8 *)&value;
+    params->setRadiusOffset((F32)(svalue * SCALE_QUANTA));
+
+    dp.unpackU8(value, "TaperX");
+    svalue = *(S8 *)&value;
+    params->setTaperX((F32)(svalue * TAPER_QUANTA));
+
+    dp.unpackU8(value, "TaperY");
+    svalue = *(S8 *)&value;
+    params->setTaperY((F32)(svalue * TAPER_QUANTA));
+
+    dp.unpackU8(value, "Revolutions");
+    params->setRevolutions((F32)(value * REV_QUANTA + 1.0f));
+
+    dp.unpackU8(value, "Skew");
+    svalue = *(S8 *)&value;
+    params->setSkew((F32)(svalue * SCALE_QUANTA));
+
+    return true;
 }
 
 //============================================================================
@@ -455,101 +455,101 @@ bool LLVolumeMessage::unpackPathParams(LLPathParams* params, LLDataPacker &dp)
 // static
 bool LLVolumeMessage::constrainVolumeParams(LLVolumeParams& params)
 {
-	U32 bad = 0;
-
-	// This is called immediately after an unpack. feed the raw data
-	// through the checked setters to constraint it to a valid set of
-	// volume params.
-	bad |= params.setType(params.getProfileParams().getCurveType(),
-						 params.getPathParams().getCurveType()) ? 0 : 1;
-	bad |= params.setBeginAndEndS(params.getProfileParams().getBegin(),
-								  params.getProfileParams().getEnd()) ? 0 : 2;
-	bad |= params.setBeginAndEndT(params.getPathParams().getBegin(),
-								  params.getPathParams().getEnd()) ? 0 : 4;
-	bad |= params.setHollow(params.getProfileParams().getHollow()) ? 0 : 8;
-	bad |= params.setTwistBegin(params.getPathParams().getTwistBegin()) ? 0 : 0x10;
-	bad |= params.setTwistEnd(params.getPathParams().getTwistEnd()) ? 0 : 0x20;
-	bad |= params.setRatio(params.getPathParams().getScaleX(),
-						   params.getPathParams().getScaleY()) ? 0 : 0x40;
-	bad |= params.setShear(params.getPathParams().getShearX(),
-						   params.getPathParams().getShearY()) ? 0 : 0x80;
-	bad |= params.setTaper(params.getPathParams().getTaperX(),
-						   params.getPathParams().getTaperY()) ? 0 : 0x100;
-	bad |= params.setRevolutions(params.getPathParams().getRevolutions()) ? 0 : 0x200;
-	bad |= params.setRadiusOffset(params.getPathParams().getRadiusOffset()) ? 0 : 0x400;
-	bad |= params.setSkew(params.getPathParams().getSkew()) ? 0 : 0x800;
-	if(bad)
-	{
-		LL_WARNS() << "LLVolumeMessage::constrainVolumeParams() - "
-				<< "forced to constrain incoming volume params: "
-				<< llformat("0x%04x",bad) << LL_ENDL;
-	}
-	return bad ? false : true;
+    U32 bad = 0;
+
+    // This is called immediately after an unpack. feed the raw data
+    // through the checked setters to constraint it to a valid set of
+    // volume params.
+    bad |= params.setType(params.getProfileParams().getCurveType(),
+                         params.getPathParams().getCurveType()) ? 0 : 1;
+    bad |= params.setBeginAndEndS(params.getProfileParams().getBegin(),
+                                  params.getProfileParams().getEnd()) ? 0 : 2;
+    bad |= params.setBeginAndEndT(params.getPathParams().getBegin(),
+                                  params.getPathParams().getEnd()) ? 0 : 4;
+    bad |= params.setHollow(params.getProfileParams().getHollow()) ? 0 : 8;
+    bad |= params.setTwistBegin(params.getPathParams().getTwistBegin()) ? 0 : 0x10;
+    bad |= params.setTwistEnd(params.getPathParams().getTwistEnd()) ? 0 : 0x20;
+    bad |= params.setRatio(params.getPathParams().getScaleX(),
+                           params.getPathParams().getScaleY()) ? 0 : 0x40;
+    bad |= params.setShear(params.getPathParams().getShearX(),
+                           params.getPathParams().getShearY()) ? 0 : 0x80;
+    bad |= params.setTaper(params.getPathParams().getTaperX(),
+                           params.getPathParams().getTaperY()) ? 0 : 0x100;
+    bad |= params.setRevolutions(params.getPathParams().getRevolutions()) ? 0 : 0x200;
+    bad |= params.setRadiusOffset(params.getPathParams().getRadiusOffset()) ? 0 : 0x400;
+    bad |= params.setSkew(params.getPathParams().getSkew()) ? 0 : 0x800;
+    if(bad)
+    {
+        LL_WARNS() << "LLVolumeMessage::constrainVolumeParams() - "
+                << "forced to constrain incoming volume params: "
+                << llformat("0x%04x",bad) << LL_ENDL;
+    }
+    return bad ? false : true;
 }
 
 bool LLVolumeMessage::packVolumeParams(const LLVolumeParams* params, LLMessageSystem *mesgsys)
 {
-	// LL_INFOS() << "pack volume" << LL_ENDL;
-	if (params)
-	{
-		packPathParams(&params->getPathParams(), mesgsys);
-		packProfileParams(&params->getProfileParams(), mesgsys);
-	}
-	else
-	{
-		packPathParams(0, mesgsys);
-		packProfileParams(0, mesgsys);
-	}
-	return true;
+    // LL_INFOS() << "pack volume" << LL_ENDL;
+    if (params)
+    {
+        packPathParams(&params->getPathParams(), mesgsys);
+        packProfileParams(&params->getProfileParams(), mesgsys);
+    }
+    else
+    {
+        packPathParams(0, mesgsys);
+        packProfileParams(0, mesgsys);
+    }
+    return true;
 }
 
 bool LLVolumeMessage::packVolumeParams(const LLVolumeParams* params, LLDataPacker &dp)
 {
-	// LL_INFOS() << "pack volume" << LL_ENDL;
-	if (params)
-	{
-		packPathParams(&params->getPathParams(), dp);
-		packProfileParams(&params->getProfileParams(), dp);
-	}
-	else
-	{
-		packPathParams(0, dp);
-		packProfileParams(0, dp);
-	}
-	return true;
+    // LL_INFOS() << "pack volume" << LL_ENDL;
+    if (params)
+    {
+        packPathParams(&params->getPathParams(), dp);
+        packProfileParams(&params->getProfileParams(), dp);
+    }
+    else
+    {
+        packPathParams(0, dp);
+        packProfileParams(0, dp);
+    }
+    return true;
 }
 
 bool LLVolumeMessage::unpackVolumeParams(
-	LLVolumeParams* params,
-	LLMessageSystem* mesgsys,
-	char const* block_name,
-	S32 block_num)
+    LLVolumeParams* params,
+    LLMessageSystem* mesgsys,
+    char const* block_name,
+    S32 block_num)
 {
-	bool ok = true;
-	ok &= unpackPathParams(
-		&params->getPathParams(),
-		mesgsys,
-		block_name,
-		block_num);
-	ok &= unpackProfileParams(
-		&params->getProfileParams(),
-		mesgsys,
-		block_name,
-		block_num);
-	ok &= constrainVolumeParams(*params);
-		
-	return ok;
+    bool ok = true;
+    ok &= unpackPathParams(
+        &params->getPathParams(),
+        mesgsys,
+        block_name,
+        block_num);
+    ok &= unpackProfileParams(
+        &params->getProfileParams(),
+        mesgsys,
+        block_name,
+        block_num);
+    ok &= constrainVolumeParams(*params);
+
+    return ok;
 }
 
 bool LLVolumeMessage::unpackVolumeParams(
-	LLVolumeParams* params,
-	LLDataPacker &dp)
+    LLVolumeParams* params,
+    LLDataPacker &dp)
 {
-	bool ok = true;
-	ok &= unpackPathParams(&params->getPathParams(), dp);
-	ok &= unpackProfileParams(&params->getProfileParams(), dp);
-	ok &= constrainVolumeParams(*params);
-	return ok;
+    bool ok = true;
+    ok &= unpackPathParams(&params->getPathParams(), dp);
+    ok &= unpackProfileParams(&params->getProfileParams(), dp);
+    ok &= constrainVolumeParams(*params);
+    return ok;
 }
 
 //============================================================================