/** * @file llmodelpreview.h * @brief LLModelPreview class definition, class * responsible for model preview inside LLFloaterModelPreview * * $LicenseInfo:firstyear=2020&license=viewerlgpl$ * Second Life Viewer Source Code * Copyright (C) 2020, Linden Research, Inc. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; * version 2.1 of the License only. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * * Linden Research, Inc., 945 Battery Street, San Francisco, CA 94111 USA * $/LicenseInfo$ */ #ifndef LL_LLMODELPREVIEW_H #define LL_LLMODELPREVIEW_H #include "lldynamictexture.h" #include "llfloatermodelpreview.h" #include "llmeshrepository.h" #include "llmodelloader.h" //NUM_LOD #include "llmodel.h" class LLJoint; class LLVOAvatar; class LLTextBox; class LLVertexBuffer; class DAE; class daeElement; class domProfile_COMMON; class domInstance_geometry; class domNode; class domTranslate; class domController; class domSkin; class domMesh; // const strings needed by classes that use model preivew static const std::string lod_name[NUM_LOD + 1] = { "lowest", "low", "medium", "high", "I went off the end of the lod_name array. Me so smart." }; static const std::string lod_triangles_name[NUM_LOD + 1] = { "lowest_triangles", "low_triangles", "medium_triangles", "high_triangles", "I went off the end of the lod_triangles_name array. Me so smart." }; static const std::string lod_vertices_name[NUM_LOD + 1] = { "lowest_vertices", "low_vertices", "medium_vertices", "high_vertices", "I went off the end of the lod_vertices_name array. Me so smart." }; static const std::string lod_status_name[NUM_LOD + 1] = { "lowest_status", "low_status", "medium_status", "high_status", "I went off the end of the lod_status_name array. Me so smart." }; static const std::string lod_icon_name[NUM_LOD + 1] = { "status_icon_lowest", "status_icon_low", "status_icon_medium", "status_icon_high", "I went off the end of the lod_status_name array. Me so smart." }; static const std::string lod_status_image[NUM_LOD + 1] = { "ModelImport_Status_Good", "ModelImport_Status_Warning", "ModelImport_Status_Error", "I went off the end of the lod_status_image array. Me so smart." }; static const std::string lod_label_name[NUM_LOD + 1] = { "lowest_label", "low_label", "medium_label", "high_label", "I went off the end of the lod_label_name array. Me so smart." }; class LLModelPreview : public LLViewerDynamicTexture, public LLMutex { LOG_CLASS(LLModelPreview); typedef boost::signals2::signal<void(F32 x, F32 y, F32 z, F32 streaming_cost, F32 physics_cost)> details_signal_t; typedef boost::signals2::signal<void(void)> model_loaded_signal_t; typedef boost::signals2::signal<void(bool)> model_updated_signal_t; public: typedef enum { LOD_FROM_FILE = 0, MESH_OPTIMIZER_AUTO, // automatically selects method based on model or face MESH_OPTIMIZER_COMBINE, // combines faces into a single model, simplifies, then splits back into faces MESH_OPTIMIZER_SLOPPY, // uses sloppy method, works per face USE_LOD_ABOVE, } eLoDMode; typedef enum { LIMIT_TRIANGLES = 0, LIMIT_ERROR_TRESHOLD, } eLoDLimit; public: // Todo: model preview shouldn't need floater dependency, it // should just expose data to floater, not control flaoter like it does LLModelPreview(S32 width, S32 height, LLFloater* fmp); virtual ~LLModelPreview(); void resetPreviewTarget(); void setPreviewTarget(F32 distance); void setTexture(U32 name) { mTextureName = name; } void setPhysicsFromLOD(S32 lod); BOOL render(); void update(); void genBuffers(S32 lod, bool skinned); void clearBuffers(); void refresh(); void rotate(F32 yaw_radians, F32 pitch_radians); void zoom(F32 zoom_amt); void pan(F32 right, F32 up); virtual BOOL needsRender() { return mNeedsUpdate; } void setPreviewLOD(S32 lod); void clearModel(S32 lod); void getJointAliases(JointMap& joint_map); void loadModel(std::string filename, S32 lod, bool force_disable_slm = false); void loadModelCallback(S32 lod); bool lodsReady() { return !mGenLOD && mLodsQuery.empty(); } void queryLODs() { mGenLOD = true; }; void genMeshOptimizerLODs(S32 which_lod, S32 meshopt_mode, U32 decimation = 3, bool enforce_tri_limit = false); void generateNormals(); void restoreNormals(); U32 calcResourceCost(); void rebuildUploadData(); void saveUploadData(bool save_skinweights, bool save_joint_positions, bool lock_scale_if_joint_position); void saveUploadData(const std::string& filename, bool save_skinweights, bool save_joint_positions, bool lock_scale_if_joint_position); void clearIncompatible(S32 lod); void updateStatusMessages(); void updateLodControls(S32 lod); void onLODMeshOptimizerParamCommit(S32 lod, bool enforce_tri_limit, S32 mode); void addEmptyFace(LLModel* pTarget); const bool getModelPivot(void) const { return mHasPivot; } void setHasPivot(bool val) { mHasPivot = val; } void setModelPivot(const LLVector3& pivot) { mModelPivot = pivot; } //Is a rig valid so that it can be used as a criteria for allowing for uploading of joint positions //Accessors for joint position upload friendly rigs const bool isRigValidForJointPositionUpload(void) const { return mRigValidJointUpload; } void setRigValidForJointPositionUpload(bool rigValid) { mRigValidJointUpload = rigValid; } //Accessors for the legacy rigs const bool isLegacyRigValid(void) const { return mLegacyRigFlags == 0; } U32 getLegacyRigFlags() const { return mLegacyRigFlags; } void setLegacyRigFlags(U32 rigFlags) { mLegacyRigFlags = rigFlags; } static void textureLoadedCallback(BOOL success, LLViewerFetchedTexture *src_vi, LLImageRaw* src, LLImageRaw* src_aux, S32 discard_level, BOOL final, void* userdata); static bool lodQueryCallback(); boost::signals2::connection setDetailsCallback(const details_signal_t::slot_type& cb){ return mDetailsSignal.connect(cb); } boost::signals2::connection setModelLoadedCallback(const model_loaded_signal_t::slot_type& cb){ return mModelLoadedSignal.connect(cb); } boost::signals2::connection setModelUpdatedCallback(const model_updated_signal_t::slot_type& cb){ return mModelUpdatedSignal.connect(cb); } void setLoadState(U32 state) { mLoadState = state; } U32 getLoadState() { return mLoadState; } static bool sIgnoreLoadedCallback; std::vector<S32> mLodsQuery; std::vector<S32> mLodsWithParsingError; bool mHasDegenerate; protected: static void loadedCallback(LLModelLoader::scene& scene, LLModelLoader::model_list& model_list, S32 lod, void* opaque); static void stateChangedCallback(U32 state, void* opaque); static LLJoint* lookupJointByName(const std::string&, void* opaque); static U32 loadTextures(LLImportMaterial& material, void* opaque); void lookupLODModelFiles(S32 lod); private: //Utility function for controller vertex compare bool verifyCount(int expected, int result); //Creates the dummy avatar for the preview window void createPreviewAvatar(void); //Accessor for the dummy avatar LLVOAvatar* getPreviewAvatar(void) { return mPreviewAvatar; } // Count amount of original models, excluding sub-models static U32 countRootModels(LLModelLoader::model_list models); // Merges faces into single mesh, simplifies using mesh optimizer, // then splits back into faces. // Returns reached simplification ratio. -1 in case of a failure. F32 genMeshOptimizerPerModel(LLModel *base_model, LLModel *target_model, F32 indices_ratio, F32 error_threshold, bool sloppy); // Simplifies specified face using mesh optimizer. // Returns reached simplification ratio. -1 in case of a failure. F32 genMeshOptimizerPerFace(LLModel *base_model, LLModel *target_model, U32 face_idx, F32 indices_ratio, F32 error_threshold, bool sloppy); protected: friend class LLModelLoader; friend class LLFloaterModelPreview; friend class LLFloaterModelPreview::DecompRequest; friend class LLPhysicsDecomp; LLFloater* mFMP; BOOL mNeedsUpdate; bool mDirty; bool mGenLOD; U32 mTextureName; F32 mCameraDistance; F32 mCameraYaw; F32 mCameraPitch; F32 mCameraZoom; LLVector3 mCameraOffset; LLVector3 mPreviewTarget; LLVector3 mPreviewScale; S32 mPreviewLOD; S32 mPhysicsSearchLOD; U32 mResourceCost; std::string mLODFile[LLModel::NUM_LODS]; bool mLoading; U32 mLoadState; bool mResetJoints; bool mModelNoErrors; bool mLookUpLodFiles; std::map<std::string, bool> mViewOption; // Model generation parameters (must rebuild object if these change) bool mLODFrozen; U32 mRequestedLoDMode[LLModel::NUM_LODS]; S32 mRequestedTriangleCount[LLModel::NUM_LODS]; F32 mRequestedErrorThreshold[LLModel::NUM_LODS]; F32 mRequestedCreaseAngle[LLModel::NUM_LODS]; LLModelLoader* mModelLoader; LLModelLoader::scene mScene[LLModel::NUM_LODS]; LLModelLoader::scene mBaseScene; LLModelLoader::model_list mModel[LLModel::NUM_LODS]; LLModelLoader::model_list mBaseModel; typedef std::vector<LLVolumeFace> v_LLVolumeFace_t; typedef std::vector<v_LLVolumeFace_t> vv_LLVolumeFace_t; vv_LLVolumeFace_t mModelFacesCopy[LLModel::NUM_LODS]; vv_LLVolumeFace_t mBaseModelFacesCopy; U32 mGroup; std::map<LLPointer<LLModel>, U32> mObject; // Amount of triangles in original(base) model U32 mMaxTriangleLimit; // Minimum amount of allowed triangles in lod for spin cntrl. // Leave at least one triangle per model. S32 mMinTriangleLimit; LLMeshUploadThread::instance_list mUploadData; std::set<LLViewerFetchedTexture * > mTextureSet; //map of vertex buffers to models (one vertex buffer in vector per face in model std::map<LLModel*, std::vector<LLPointer<LLVertexBuffer> > > mVertexBuffer[LLModel::NUM_LODS + 1]; details_signal_t mDetailsSignal; model_loaded_signal_t mModelLoadedSignal; model_updated_signal_t mModelUpdatedSignal; LLVector3 mModelPivot; bool mHasPivot; float mPelvisZOffset; bool mRigValidJointUpload; U32 mLegacyRigFlags; bool mLastJointUpdate; bool mFirstSkinUpdate; JointNameSet mJointsFromNode; JointTransformMap mJointTransformMap; LLPointer<LLVOAvatar> mPreviewAvatar; LLCachedControl<bool> mImporterDebug; }; #endif // LL_LLMODELPREVIEW_H