/**
 * @file llvolumemessage.cpp
 * @brief LLVolumeMessage base class
 *
 * $LicenseInfo:firstyear=2001&license=viewerlgpl$
 * Second Life Viewer Source Code
 * Copyright (C) 2010, Linden Research, Inc.
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation;
 * version 2.1 of the License only.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 * Linden Research, Inc., 945 Battery Street, San Francisco, CA  94111  USA
 * $/LicenseInfo$
 */

#include "linden_common.h"

#include "message.h"
#include "llvolumemessage.h"
#include "lldatapacker.h"

//============================================================================

// LLVolumeMessage is just a wrapper class; all members are static

//============================================================================

bool LLVolumeMessage::packProfileParams(
    const LLProfileParams* params,
    LLMessageSystem *mesgsys)
{
    // Default to cylinder
    static LLProfileParams defaultparams(LL_PCODE_PROFILE_CIRCLE, U16(0), U16(0), U16(0));

    if (!params)
        params = &defaultparams;

    U8 tempU8;
    U16 tempU16;

    tempU8 = params->getCurveType();
    mesgsys->addU8Fast(_PREHASH_ProfileCurve, tempU8);

    tempU16 = (U16) ll_round( params->getBegin() / CUT_QUANTA);
    mesgsys->addU16Fast(_PREHASH_ProfileBegin, tempU16);

    tempU16 = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
    mesgsys->addU16Fast(_PREHASH_ProfileEnd, tempU16);

    tempU16 = (U16) ll_round(params->getHollow() / HOLLOW_QUANTA);
    mesgsys->addU16Fast(_PREHASH_ProfileHollow, tempU16);

    return true;
}

bool LLVolumeMessage::packProfileParams(
    const LLProfileParams* params,
    LLDataPacker &dp)
{
    // Default to cylinder
    static LLProfileParams defaultparams(LL_PCODE_PROFILE_CIRCLE, U16(0), U16(0), U16(0));

    if (!params)
        params = &defaultparams;

    U8 tempU8;
    U16 tempU16;

    tempU8 = params->getCurveType();
    dp.packU8(tempU8, "Curve");

    tempU16 = (U16) ll_round( params->getBegin() / CUT_QUANTA);
    dp.packU16(tempU16, "Begin");

    tempU16 = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
    dp.packU16(tempU16, "End");

    tempU16 = (U16) ll_round(params->getHollow() / HOLLOW_QUANTA);
    dp.packU16(tempU16, "Hollow");
    return true;
}

bool LLVolumeMessage::unpackProfileParams(
    LLProfileParams* params,
    LLMessageSystem* mesgsys,
    char const* block_name,
    S32 block_num)
{
    bool ok = true;
    U8 temp_u8;
    U16 temp_u16;
    F32 temp_f32;

    mesgsys->getU8Fast(block_name, _PREHASH_ProfileCurve, temp_u8, block_num);
    params->setCurveType(temp_u8);

    mesgsys->getU16Fast(block_name, _PREHASH_ProfileBegin, temp_u16, block_num);
    temp_f32 = temp_u16 * CUT_QUANTA;
    if (temp_f32 > 1.f)
    {
        LL_WARNS() << "Profile begin out of range: " << temp_f32
            << ". Clamping to 0.0." << LL_ENDL;
        temp_f32 = 0.f;
        ok = false;
    }
    params->setBegin(temp_f32);

    mesgsys->getU16Fast(block_name, _PREHASH_ProfileEnd, temp_u16, block_num);
    temp_f32 = temp_u16 * CUT_QUANTA;
    if (temp_f32 > 1.f)
    {
        LL_WARNS() << "Profile end out of range: " << 1.f - temp_f32
            << ". Clamping to 1.0." << LL_ENDL;
        temp_f32 = 1.f;
        ok = false;
    }
    params->setEnd(1.f - temp_f32);

    mesgsys->getU16Fast(block_name, _PREHASH_ProfileHollow, temp_u16, block_num);
    temp_f32 = temp_u16 * HOLLOW_QUANTA;
    if (temp_f32 > 1.f)
    {
        LL_WARNS() << "Profile hollow out of range: " << temp_f32
            << ". Clamping to 0.0." << LL_ENDL;
        temp_f32 = 0.f;
        ok = false;
    }
    params->setHollow(temp_f32);

    /*
    LL_INFOS() << "Unpacking Profile Block " << block_num << LL_ENDL;
    LL_INFOS() << "Curve:     " << (U32)getCurve() << LL_ENDL;
    LL_INFOS() << "Begin:     " << getBegin() << LL_ENDL;
    LL_INFOS() << "End:     " << getEnd() << LL_ENDL;
    LL_INFOS() << "Hollow:     " << getHollow() << LL_ENDL;
    */
    return ok;

}

bool LLVolumeMessage::unpackProfileParams(
    LLProfileParams* params,
    LLDataPacker &dp)
{
    bool ok = true;
    U8 temp_u8;
    U16 temp_u16;
    F32 temp_f32;

    dp.unpackU8(temp_u8, "Curve");
    params->setCurveType(temp_u8);

    dp.unpackU16(temp_u16, "Begin");
    temp_f32 = temp_u16 * CUT_QUANTA;
    if (temp_f32 > 1.f)
    {
        LL_WARNS() << "Profile begin out of range: " << temp_f32 << LL_ENDL;
        LL_WARNS() << "Clamping to 0.0" << LL_ENDL;
        temp_f32 = 0.f;
        ok = false;
    }
    params->setBegin(temp_f32);

    dp.unpackU16(temp_u16, "End");
    temp_f32 = temp_u16 * CUT_QUANTA;
    if (temp_f32 > 1.f)
    {
        LL_WARNS() << "Profile end out of range: " << 1.f - temp_f32 << LL_ENDL;
        LL_WARNS() << "Clamping to 1.0" << LL_ENDL;
        temp_f32 = 1.f;
        ok = false;
    }
    params->setEnd(1.f - temp_f32);

    dp.unpackU16(temp_u16, "Hollow");
    temp_f32 = temp_u16 * HOLLOW_QUANTA;
    if (temp_f32 > 1.f)
    {
        LL_WARNS() << "Profile hollow out of range: " << temp_f32 << LL_ENDL;
        LL_WARNS() << "Clamping to 0.0" << LL_ENDL;
        temp_f32 = 0.f;
        ok = false;
    }
    params->setHollow(temp_f32);

    return ok;
}

//============================================================================

// Quantization:
// For cut begin, range is 0 to 1, quanta is 0.005, 0 maps to 0
// For cut end, range is 0 to 1, quanta is 0.005, 1 maps to 0
// For scale, range is 0 to 1, quanta is 0.01, 0 maps to 0, 1 maps to 100
// For shear, range is -0.5 to 0.5, quanta is 0.01, 0 maps to 0
// For taper, range is -1 to 1, quanta is 0.01, 0 maps to 0
bool LLVolumeMessage::packPathParams(
    const LLPathParams* params,
    LLMessageSystem *mesgsys)
{
    // Default to cylinder with no cut, top same size as bottom, no shear, no twist
    static LLPathParams defaultparams(LL_PCODE_PATH_LINE, U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), 0);
    if (!params)
        params = &defaultparams;

    U8 curve = params->getCurveType();
    mesgsys->addU8Fast(_PREHASH_PathCurve, curve);

    U16 begin = (U16) ll_round(params->getBegin() / CUT_QUANTA);
    mesgsys->addU16Fast(_PREHASH_PathBegin, begin);

    U16 end = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
    mesgsys->addU16Fast(_PREHASH_PathEnd, end);

    // Avoid truncation problem with direct F32->U8 cast.
    // (e.g., (U8) (0.50 / 0.01) = (U8) 49.9999999 = 49 not 50.

    U8 pack_scale_x = 200 - (U8) ll_round(params->getScaleX() / SCALE_QUANTA);
    mesgsys->addU8Fast(_PREHASH_PathScaleX, pack_scale_x );

    U8 pack_scale_y = 200 - (U8) ll_round(params->getScaleY() / SCALE_QUANTA);
    mesgsys->addU8Fast(_PREHASH_PathScaleY, pack_scale_y );

    U8 pack_shear_x = (U8) ll_round(params->getShearX() / SHEAR_QUANTA);
    mesgsys->addU8Fast(_PREHASH_PathShearX, pack_shear_x );

    U8 pack_shear_y = (U8) ll_round(params->getShearY() / SHEAR_QUANTA);
    mesgsys->addU8Fast(_PREHASH_PathShearY, pack_shear_y );

    S8 twist = (S8) ll_round(params->getTwist() / SCALE_QUANTA);
    mesgsys->addS8Fast(_PREHASH_PathTwist, twist);

    S8 twist_begin = (S8) ll_round(params->getTwistBegin() / SCALE_QUANTA);
    mesgsys->addS8Fast(_PREHASH_PathTwistBegin, twist_begin);

    S8 radius_offset = (S8) ll_round(params->getRadiusOffset() / SCALE_QUANTA);
    mesgsys->addS8Fast(_PREHASH_PathRadiusOffset, radius_offset);

    S8 taper_x = (S8) ll_round(params->getTaperX() / TAPER_QUANTA);
    mesgsys->addS8Fast(_PREHASH_PathTaperX, taper_x);

    S8 taper_y = (S8) ll_round(params->getTaperY() / TAPER_QUANTA);
    mesgsys->addS8Fast(_PREHASH_PathTaperY, taper_y);

    U8 revolutions = (U8) ll_round( (params->getRevolutions() - 1.0f) / REV_QUANTA);
    mesgsys->addU8Fast(_PREHASH_PathRevolutions, revolutions);

    S8 skew = (S8) ll_round(params->getSkew() / SCALE_QUANTA);
    mesgsys->addS8Fast(_PREHASH_PathSkew, skew);

    return true;
}

bool LLVolumeMessage::packPathParams(
    const LLPathParams* params,
    LLDataPacker &dp)
{
    // Default to cylinder with no cut, top same size as bottom, no shear, no twist
    static LLPathParams defaultparams(LL_PCODE_PATH_LINE, U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), U8(0), 0);
    if (!params)
        params = &defaultparams;

    U8 curve = params->getCurveType();
    dp.packU8(curve, "Curve");

    U16 begin = (U16) ll_round(params->getBegin() / CUT_QUANTA);
    dp.packU16(begin, "Begin");

    U16 end = 50000 - (U16) ll_round(params->getEnd() / CUT_QUANTA);
    dp.packU16(end, "End");

    // Avoid truncation problem with direct F32->U8 cast.
    // (e.g., (U8) (0.50 / 0.01) = (U8) 49.9999999 = 49 not 50.

    U8 pack_scale_x = 200 - (U8) ll_round(params->getScaleX() / SCALE_QUANTA);
    dp.packU8(pack_scale_x, "ScaleX");

    U8 pack_scale_y = 200 - (U8) ll_round(params->getScaleY() / SCALE_QUANTA);
    dp.packU8(pack_scale_y, "ScaleY");

    S8 pack_shear_x = (S8) ll_round(params->getShearX() / SHEAR_QUANTA);
    dp.packU8(*(U8 *)&pack_shear_x, "ShearX");

    S8 pack_shear_y = (S8) ll_round(params->getShearY() / SHEAR_QUANTA);
    dp.packU8(*(U8 *)&pack_shear_y, "ShearY");

    S8 twist = (S8) ll_round(params->getTwist() / SCALE_QUANTA);
    dp.packU8(*(U8 *)&twist, "Twist");

    S8 twist_begin = (S8) ll_round(params->getTwistBegin() / SCALE_QUANTA);
    dp.packU8(*(U8 *)&twist_begin, "TwistBegin");

    S8 radius_offset = (S8) ll_round(params->getRadiusOffset() / SCALE_QUANTA);
    dp.packU8(*(U8 *)&radius_offset, "RadiusOffset");

    S8 taper_x = (S8) ll_round(params->getTaperX() / TAPER_QUANTA);
    dp.packU8(*(U8 *)&taper_x, "TaperX");

    S8 taper_y = (S8) ll_round(params->getTaperY() / TAPER_QUANTA);
    dp.packU8(*(U8 *)&taper_y, "TaperY");

    U8 revolutions = (U8) ll_round( (params->getRevolutions() - 1.0f) / REV_QUANTA);
    dp.packU8(*(U8 *)&revolutions, "Revolutions");

    S8 skew = (S8) ll_round(params->getSkew() / SCALE_QUANTA);
    dp.packU8(*(U8 *)&skew, "Skew");

    return true;
}

bool LLVolumeMessage::unpackPathParams(
    LLPathParams* params,
    LLMessageSystem* mesgsys,
    char const* block_name,
    S32 block_num)
{
    U8 curve;
    mesgsys->getU8Fast(block_name, _PREHASH_PathCurve, curve, block_num);
    params->setCurveType(curve);

    U16 begin;
    mesgsys->getU16Fast(block_name, _PREHASH_PathBegin, begin, block_num);
    params->setBegin((F32)(begin * CUT_QUANTA));

    U16 end;
    mesgsys->getU16Fast(block_name, _PREHASH_PathEnd, end, block_num);
    params->setEnd((F32)((50000 - end) * CUT_QUANTA));

    U8 pack_scale_x, pack_scale_y;
    mesgsys->getU8Fast(block_name, _PREHASH_PathScaleX, pack_scale_x, block_num);
    mesgsys->getU8Fast(block_name, _PREHASH_PathScaleY, pack_scale_y, block_num);
    F32 x = (F32) (200 - pack_scale_x) * SCALE_QUANTA;
    F32 y = (F32) (200 - pack_scale_y) * SCALE_QUANTA;
    params->setScale( x, y );

    S8 shear_x_quant, shear_y_quant;
    mesgsys->getS8Fast(block_name, _PREHASH_PathShearX, shear_x_quant, block_num);
    mesgsys->getS8Fast(block_name, _PREHASH_PathShearY, shear_y_quant, block_num);
    F32 shear_x = (F32) shear_x_quant * SHEAR_QUANTA;
    F32 shear_y = (F32) shear_y_quant * SHEAR_QUANTA;
    params->setShear( shear_x, shear_y );

    S8 twist;
    mesgsys->getS8Fast(block_name, _PREHASH_PathTwist, twist, block_num );
    params->setTwist((F32)(twist * SCALE_QUANTA));

    S8 twist_begin;
    mesgsys->getS8Fast(block_name, _PREHASH_PathTwistBegin, twist_begin, block_num );
    params->setTwistBegin((F32)(twist_begin * SCALE_QUANTA));

    S8 radius_offset;
    mesgsys->getS8Fast(block_name, _PREHASH_PathRadiusOffset, radius_offset, block_num );
    params->setRadiusOffset((F32)(radius_offset * SCALE_QUANTA));

    S8 taper_x_quant, taper_y_quant;
    mesgsys->getS8Fast(block_name, _PREHASH_PathTaperX, taper_x_quant, block_num );
    mesgsys->getS8Fast(block_name, _PREHASH_PathTaperY, taper_y_quant, block_num );
    F32 taper_x = (F32)(taper_x_quant * TAPER_QUANTA);
    F32 taper_y = (F32)(taper_y_quant * TAPER_QUANTA);
    params->setTaper( taper_x, taper_y );

    U8 revolutions;
    mesgsys->getU8Fast(block_name, _PREHASH_PathRevolutions, revolutions, block_num );
    params->setRevolutions((F32)(revolutions * REV_QUANTA + 1.0f));

    S8 skew;
    mesgsys->getS8Fast(block_name, _PREHASH_PathSkew, skew, block_num );
    params->setSkew((F32)(skew * SCALE_QUANTA));

/*
    LL_INFOS() << "Unpacking Path Block " << block_num << LL_ENDL;
    LL_INFOS() << "Curve:     " << (U32)params->getCurve() << LL_ENDL;
    LL_INFOS() << "Begin:     " << params->getBegin() << LL_ENDL;
    LL_INFOS() << "End:     " << params->getEnd() << LL_ENDL;
    LL_INFOS() << "Scale:     " << params->getScale() << LL_ENDL;
    LL_INFOS() << "Twist:     " << params->getTwist() << LL_ENDL;
*/

    return true;

}

bool LLVolumeMessage::unpackPathParams(LLPathParams* params, LLDataPacker &dp)
{
    U8 value;
    S8 svalue;
    U16 temp_u16;

    dp.unpackU8(value, "Curve");
    params->setCurveType( value );

    dp.unpackU16(temp_u16, "Begin");
    params->setBegin((F32)(temp_u16 * CUT_QUANTA));

    dp.unpackU16(temp_u16, "End");
    params->setEnd((F32)((50000 - temp_u16) * CUT_QUANTA));

    dp.unpackU8(value, "ScaleX");
    F32 x = (F32) (200 - value) * SCALE_QUANTA;
    dp.unpackU8(value, "ScaleY");
    F32 y = (F32) (200 - value) * SCALE_QUANTA;
    params->setScale( x, y );

    dp.unpackU8(value, "ShearX");
    svalue = *(S8 *)&value;
    F32 shear_x = (F32) svalue * SHEAR_QUANTA;
    dp.unpackU8(value, "ShearY");
    svalue = *(S8 *)&value;
    F32 shear_y = (F32) svalue * SHEAR_QUANTA;
    params->setShear( shear_x, shear_y );

    dp.unpackU8(value, "Twist");
    svalue = *(S8 *)&value;
    params->setTwist((F32)(svalue * SCALE_QUANTA));

    dp.unpackU8(value, "TwistBegin");
    svalue = *(S8 *)&value;
    params->setTwistBegin((F32)(svalue * SCALE_QUANTA));

    dp.unpackU8(value, "RadiusOffset");
    svalue = *(S8 *)&value;
    params->setRadiusOffset((F32)(svalue * SCALE_QUANTA));

    dp.unpackU8(value, "TaperX");
    svalue = *(S8 *)&value;
    params->setTaperX((F32)(svalue * TAPER_QUANTA));

    dp.unpackU8(value, "TaperY");
    svalue = *(S8 *)&value;
    params->setTaperY((F32)(svalue * TAPER_QUANTA));

    dp.unpackU8(value, "Revolutions");
    params->setRevolutions((F32)(value * REV_QUANTA + 1.0f));

    dp.unpackU8(value, "Skew");
    svalue = *(S8 *)&value;
    params->setSkew((F32)(svalue * SCALE_QUANTA));

    return true;
}

//============================================================================

// static
bool LLVolumeMessage::constrainVolumeParams(LLVolumeParams& params)
{
    U32 bad = 0;

    // This is called immediately after an unpack. feed the raw data
    // through the checked setters to constraint it to a valid set of
    // volume params.
    bad |= params.setType(params.getProfileParams().getCurveType(),
                         params.getPathParams().getCurveType()) ? 0 : 1;
    bad |= params.setBeginAndEndS(params.getProfileParams().getBegin(),
                                  params.getProfileParams().getEnd()) ? 0 : 2;
    bad |= params.setBeginAndEndT(params.getPathParams().getBegin(),
                                  params.getPathParams().getEnd()) ? 0 : 4;
    bad |= params.setHollow(params.getProfileParams().getHollow()) ? 0 : 8;
    bad |= params.setTwistBegin(params.getPathParams().getTwistBegin()) ? 0 : 0x10;
    bad |= params.setTwistEnd(params.getPathParams().getTwistEnd()) ? 0 : 0x20;
    bad |= params.setRatio(params.getPathParams().getScaleX(),
                           params.getPathParams().getScaleY()) ? 0 : 0x40;
    bad |= params.setShear(params.getPathParams().getShearX(),
                           params.getPathParams().getShearY()) ? 0 : 0x80;
    bad |= params.setTaper(params.getPathParams().getTaperX(),
                           params.getPathParams().getTaperY()) ? 0 : 0x100;
    bad |= params.setRevolutions(params.getPathParams().getRevolutions()) ? 0 : 0x200;
    bad |= params.setRadiusOffset(params.getPathParams().getRadiusOffset()) ? 0 : 0x400;
    bad |= params.setSkew(params.getPathParams().getSkew()) ? 0 : 0x800;

    if (bad)
    {
        LL_WARNS() << "LLVolumeMessage::constrainVolumeParams() - "
                << "forced to constrain incoming volume params: "
                << llformat("0x%04x", bad) << LL_ENDL;
    }

    return bad == 0;
}

bool LLVolumeMessage::packVolumeParams(const LLVolumeParams* params, LLMessageSystem *mesgsys)
{
    // LL_INFOS() << "pack volume" << LL_ENDL;
    if (params)
    {
        packPathParams(&params->getPathParams(), mesgsys);
        packProfileParams(&params->getProfileParams(), mesgsys);
    }
    else
    {
        packPathParams(0, mesgsys);
        packProfileParams(0, mesgsys);
    }
    return true;
}

bool LLVolumeMessage::packVolumeParams(const LLVolumeParams* params, LLDataPacker &dp)
{
    // LL_INFOS() << "pack volume" << LL_ENDL;
    if (params)
    {
        packPathParams(&params->getPathParams(), dp);
        packProfileParams(&params->getProfileParams(), dp);
    }
    else
    {
        packPathParams(0, dp);
        packProfileParams(0, dp);
    }
    return true;
}

bool LLVolumeMessage::unpackVolumeParams(
    LLVolumeParams* params,
    LLMessageSystem* mesgsys,
    char const* block_name,
    S32 block_num)
{
    bool ok = true;
    ok &= unpackPathParams(
        &params->getPathParams(),
        mesgsys,
        block_name,
        block_num);
    ok &= unpackProfileParams(
        &params->getProfileParams(),
        mesgsys,
        block_name,
        block_num);
    ok &= constrainVolumeParams(*params);

    return ok;
}

bool LLVolumeMessage::unpackVolumeParams(
    LLVolumeParams* params,
    LLDataPacker &dp)
{
    bool ok = true;
    ok &= unpackPathParams(&params->getPathParams(), dp);
    ok &= unpackProfileParams(&params->getProfileParams(), dp);
    ok &= constrainVolumeParams(*params);
    return ok;
}

//============================================================================