From 1b68f71348ecf3983b76b40d7940da8377f049b7 Mon Sep 17 00:00:00 2001 From: Andrey Lihatskiy Date: Mon, 29 Apr 2024 07:43:28 +0300 Subject: #824 Process source files in bulk: replace tabs with spaces, convert CRLF to LF, and trim trailing whitespaces as needed --- indra/newview/llpanelobject.cpp | 3554 +++++++++++++++++++-------------------- 1 file changed, 1777 insertions(+), 1777 deletions(-) (limited to 'indra/newview/llpanelobject.cpp') diff --git a/indra/newview/llpanelobject.cpp b/indra/newview/llpanelobject.cpp index 0704fc881d..e06333205f 100644 --- a/indra/newview/llpanelobject.cpp +++ b/indra/newview/llpanelobject.cpp @@ -1,25 +1,25 @@ -/** +/** * @file llpanelobject.cpp * @brief Object editing (position, scale, etc.) in the tools floater * * $LicenseInfo:firstyear=2001&license=viewerlgpl$ * Second Life Viewer Source Code * Copyright (C) 2010, Linden Research, Inc. - * + * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; * version 2.1 of the License only. - * + * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. - * + * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - * + * * Linden Research, Inc., 945 Battery Street, San Francisco, CA 94111 USA * $/LicenseInfo$ */ @@ -73,228 +73,228 @@ // Constants // enum { - MI_BOX, - MI_CYLINDER, - MI_PRISM, - MI_SPHERE, - MI_TORUS, - MI_TUBE, - MI_RING, - MI_SCULPT, - MI_NONE, - MI_VOLUME_COUNT + MI_BOX, + MI_CYLINDER, + MI_PRISM, + MI_SPHERE, + MI_TORUS, + MI_TUBE, + MI_RING, + MI_SCULPT, + MI_NONE, + MI_VOLUME_COUNT }; enum { - MI_HOLE_SAME, - MI_HOLE_CIRCLE, - MI_HOLE_SQUARE, - MI_HOLE_TRIANGLE, - MI_HOLE_COUNT + MI_HOLE_SAME, + MI_HOLE_CIRCLE, + MI_HOLE_SQUARE, + MI_HOLE_TRIANGLE, + MI_HOLE_COUNT }; const F32 MAX_ATTACHMENT_DIST = 3.5f; // meters //static const std::string LEGACY_FULLBRIGHT_DESC =LLTrans::getString("Fullbright"); -BOOL LLPanelObject::postBuild() +BOOL LLPanelObject::postBuild() { - setMouseOpaque(FALSE); - - //-------------------------------------------------------- - // Top - //-------------------------------------------------------- - - // Lock checkbox - mCheckLock = getChild("checkbox locked"); - childSetCommitCallback("checkbox locked",onCommitLock,this); - - // Physical checkbox - mCheckPhysics = getChild("Physical Checkbox Ctrl"); - childSetCommitCallback("Physical Checkbox Ctrl",onCommitPhysics,this); - - // Temporary checkbox - mCheckTemporary = getChild("Temporary Checkbox Ctrl"); - childSetCommitCallback("Temporary Checkbox Ctrl",onCommitTemporary,this); - - // Phantom checkbox - mCheckPhantom = getChild("Phantom Checkbox Ctrl"); - childSetCommitCallback("Phantom Checkbox Ctrl",onCommitPhantom,this); - - // Position - mMenuClipboardPos = getChild("clipboard_pos_btn"); - mLabelPosition = getChild("label position"); - mCtrlPosX = getChild("Pos X"); - childSetCommitCallback("Pos X",onCommitPosition,this); - mCtrlPosY = getChild("Pos Y"); - childSetCommitCallback("Pos Y",onCommitPosition,this); - mCtrlPosZ = getChild("Pos Z"); - childSetCommitCallback("Pos Z",onCommitPosition,this); - - // Scale - mMenuClipboardSize = getChild("clipboard_size_btn"); - mLabelSize = getChild("label size"); - mCtrlScaleX = getChild("Scale X"); - childSetCommitCallback("Scale X",onCommitScale,this); - - // Scale Y - mCtrlScaleY = getChild("Scale Y"); - childSetCommitCallback("Scale Y",onCommitScale,this); - - // Scale Z - mCtrlScaleZ = getChild("Scale Z"); - childSetCommitCallback("Scale Z",onCommitScale,this); - - // Rotation - mMenuClipboardRot = getChild("clipboard_rot_btn"); - mLabelRotation = getChild("label rotation"); - mCtrlRotX = getChild("Rot X"); - childSetCommitCallback("Rot X",onCommitRotation,this); - mCtrlRotY = getChild("Rot Y"); - childSetCommitCallback("Rot Y",onCommitRotation,this); - mCtrlRotZ = getChild("Rot Z"); - childSetCommitCallback("Rot Z",onCommitRotation,this); - - //-------------------------------------------------------- - - // Base Type - mComboBaseType = getChild("comboBaseType"); - childSetCommitCallback("comboBaseType",onCommitParametric,this); - - mMenuClipboardParams = getChild("clipboard_obj_params_btn"); - - // Cut - mLabelCut = getChild("text cut"); - mSpinCutBegin = getChild("cut begin"); - childSetCommitCallback("cut begin",onCommitParametric,this); - mSpinCutBegin->setValidateBeforeCommit( precommitValidate ); - mSpinCutEnd = getChild("cut end"); - childSetCommitCallback("cut end",onCommitParametric,this); - mSpinCutEnd->setValidateBeforeCommit( &precommitValidate ); - - // Hollow / Skew - mLabelHollow = getChild("text hollow"); - mLabelSkew = getChild("text skew"); - mSpinHollow = getChild("Scale 1"); - childSetCommitCallback("Scale 1",onCommitParametric,this); - mSpinHollow->setValidateBeforeCommit( &precommitValidate ); - mSpinSkew = getChild("Skew"); - childSetCommitCallback("Skew",onCommitParametric,this); - mSpinSkew->setValidateBeforeCommit( &precommitValidate ); - mLabelHoleType = getChild("Hollow Shape"); - - // Hole Type - mComboHoleType = getChild("hole"); - childSetCommitCallback("hole",onCommitParametric,this); - - // Twist - mLabelTwist = getChild("text twist"); - mSpinTwistBegin = getChild("Twist Begin"); - childSetCommitCallback("Twist Begin",onCommitParametric,this); - mSpinTwistBegin->setValidateBeforeCommit( precommitValidate ); - mSpinTwist = getChild("Twist End"); - childSetCommitCallback("Twist End",onCommitParametric,this); - mSpinTwist->setValidateBeforeCommit( &precommitValidate ); - - // Scale - mSpinScaleX = getChild("Taper Scale X"); - childSetCommitCallback("Taper Scale X",onCommitParametric,this); - mSpinScaleX->setValidateBeforeCommit( &precommitValidate ); - mSpinScaleY = getChild("Taper Scale Y"); - childSetCommitCallback("Taper Scale Y",onCommitParametric,this); - mSpinScaleY->setValidateBeforeCommit( &precommitValidate ); - - // Shear - mLabelShear = getChild("text topshear"); - mSpinShearX = getChild("Shear X"); - childSetCommitCallback("Shear X",onCommitParametric,this); - mSpinShearX->setValidateBeforeCommit( &precommitValidate ); - mSpinShearY = getChild("Shear Y"); - childSetCommitCallback("Shear Y",onCommitParametric,this); - mSpinShearY->setValidateBeforeCommit( &precommitValidate ); - - // Path / Profile - mCtrlPathBegin = getChild("Path Limit Begin"); - childSetCommitCallback("Path Limit Begin",onCommitParametric,this); - mCtrlPathBegin->setValidateBeforeCommit( &precommitValidate ); - mCtrlPathEnd = getChild("Path Limit End"); - childSetCommitCallback("Path Limit End",onCommitParametric,this); - mCtrlPathEnd->setValidateBeforeCommit( &precommitValidate ); - - // Taper - mLabelTaper = getChild("text taper2"); - mSpinTaperX = getChild("Taper X"); - childSetCommitCallback("Taper X",onCommitParametric,this); - mSpinTaperX->setValidateBeforeCommit( precommitValidate ); - mSpinTaperY = getChild("Taper Y"); - childSetCommitCallback("Taper Y",onCommitParametric,this); - mSpinTaperY->setValidateBeforeCommit( precommitValidate ); - - // Radius Offset / Revolutions - mLabelRadiusOffset = getChild("text radius delta"); - mLabelRevolutions = getChild("text revolutions"); - mSpinRadiusOffset = getChild("Radius Offset"); - childSetCommitCallback("Radius Offset",onCommitParametric,this); - mSpinRadiusOffset->setValidateBeforeCommit( &precommitValidate ); - mSpinRevolutions = getChild("Revolutions"); - childSetCommitCallback("Revolutions",onCommitParametric,this); - mSpinRevolutions->setValidateBeforeCommit( &precommitValidate ); - - // Sculpt - mCtrlSculptTexture = getChild("sculpt texture control"); - if (mCtrlSculptTexture) - { - mCtrlSculptTexture->setDefaultImageAssetID(LLUUID(SCULPT_DEFAULT_TEXTURE)); - mCtrlSculptTexture->setCommitCallback( boost::bind(&LLPanelObject::onCommitSculpt, this, _2 )); - mCtrlSculptTexture->setOnCancelCallback( boost::bind(&LLPanelObject::onCancelSculpt, this, _2 )); - mCtrlSculptTexture->setOnSelectCallback( boost::bind(&LLPanelObject::onSelectSculpt, this, _2 )); - mCtrlSculptTexture->setDropCallback( boost::bind(&LLPanelObject::onDropSculpt, this, _2 )); - // Don't allow (no copy) or (no transfer) textures to be selected during immediate mode - mCtrlSculptTexture->setImmediateFilterPermMask(PERM_COPY | PERM_TRANSFER); - mCtrlSculptTexture->setDnDFilterPermMask(PERM_COPY | PERM_TRANSFER); - LLAggregatePermissions texture_perms; - if (LLSelectMgr::getInstance()->selectGetAggregateTexturePermissions(texture_perms)) - { - BOOL can_copy = - texture_perms.getValue(PERM_COPY) == LLAggregatePermissions::AP_EMPTY || - texture_perms.getValue(PERM_COPY) == LLAggregatePermissions::AP_ALL; - BOOL can_transfer = - texture_perms.getValue(PERM_TRANSFER) == LLAggregatePermissions::AP_EMPTY || - texture_perms.getValue(PERM_TRANSFER) == LLAggregatePermissions::AP_ALL; - mCtrlSculptTexture->setCanApplyImmediately(can_copy && can_transfer); - } - else - { - mCtrlSculptTexture->setCanApplyImmediately(FALSE); - } - } - - mLabelSculptType = getChild("label sculpt type"); - mCtrlSculptType = getChild("sculpt type control"); - childSetCommitCallback("sculpt type control", onCommitSculptType, this); - mCtrlSculptMirror = getChild("sculpt mirror control"); - childSetCommitCallback("sculpt mirror control", onCommitSculptType, this); - mCtrlSculptInvert = getChild("sculpt invert control"); - childSetCommitCallback("sculpt invert control", onCommitSculptType, this); - - // Start with everyone disabled - clearCtrls(); - - return TRUE; + setMouseOpaque(FALSE); + + //-------------------------------------------------------- + // Top + //-------------------------------------------------------- + + // Lock checkbox + mCheckLock = getChild("checkbox locked"); + childSetCommitCallback("checkbox locked",onCommitLock,this); + + // Physical checkbox + mCheckPhysics = getChild("Physical Checkbox Ctrl"); + childSetCommitCallback("Physical Checkbox Ctrl",onCommitPhysics,this); + + // Temporary checkbox + mCheckTemporary = getChild("Temporary Checkbox Ctrl"); + childSetCommitCallback("Temporary Checkbox Ctrl",onCommitTemporary,this); + + // Phantom checkbox + mCheckPhantom = getChild("Phantom Checkbox Ctrl"); + childSetCommitCallback("Phantom Checkbox Ctrl",onCommitPhantom,this); + + // Position + mMenuClipboardPos = getChild("clipboard_pos_btn"); + mLabelPosition = getChild("label position"); + mCtrlPosX = getChild("Pos X"); + childSetCommitCallback("Pos X",onCommitPosition,this); + mCtrlPosY = getChild("Pos Y"); + childSetCommitCallback("Pos Y",onCommitPosition,this); + mCtrlPosZ = getChild("Pos Z"); + childSetCommitCallback("Pos Z",onCommitPosition,this); + + // Scale + mMenuClipboardSize = getChild("clipboard_size_btn"); + mLabelSize = getChild("label size"); + mCtrlScaleX = getChild("Scale X"); + childSetCommitCallback("Scale X",onCommitScale,this); + + // Scale Y + mCtrlScaleY = getChild("Scale Y"); + childSetCommitCallback("Scale Y",onCommitScale,this); + + // Scale Z + mCtrlScaleZ = getChild("Scale Z"); + childSetCommitCallback("Scale Z",onCommitScale,this); + + // Rotation + mMenuClipboardRot = getChild("clipboard_rot_btn"); + mLabelRotation = getChild("label rotation"); + mCtrlRotX = getChild("Rot X"); + childSetCommitCallback("Rot X",onCommitRotation,this); + mCtrlRotY = getChild("Rot Y"); + childSetCommitCallback("Rot Y",onCommitRotation,this); + mCtrlRotZ = getChild("Rot Z"); + childSetCommitCallback("Rot Z",onCommitRotation,this); + + //-------------------------------------------------------- + + // Base Type + mComboBaseType = getChild("comboBaseType"); + childSetCommitCallback("comboBaseType",onCommitParametric,this); + + mMenuClipboardParams = getChild("clipboard_obj_params_btn"); + + // Cut + mLabelCut = getChild("text cut"); + mSpinCutBegin = getChild("cut begin"); + childSetCommitCallback("cut begin",onCommitParametric,this); + mSpinCutBegin->setValidateBeforeCommit( precommitValidate ); + mSpinCutEnd = getChild("cut end"); + childSetCommitCallback("cut end",onCommitParametric,this); + mSpinCutEnd->setValidateBeforeCommit( &precommitValidate ); + + // Hollow / Skew + mLabelHollow = getChild("text hollow"); + mLabelSkew = getChild("text skew"); + mSpinHollow = getChild("Scale 1"); + childSetCommitCallback("Scale 1",onCommitParametric,this); + mSpinHollow->setValidateBeforeCommit( &precommitValidate ); + mSpinSkew = getChild("Skew"); + childSetCommitCallback("Skew",onCommitParametric,this); + mSpinSkew->setValidateBeforeCommit( &precommitValidate ); + mLabelHoleType = getChild("Hollow Shape"); + + // Hole Type + mComboHoleType = getChild("hole"); + childSetCommitCallback("hole",onCommitParametric,this); + + // Twist + mLabelTwist = getChild("text twist"); + mSpinTwistBegin = getChild("Twist Begin"); + childSetCommitCallback("Twist Begin",onCommitParametric,this); + mSpinTwistBegin->setValidateBeforeCommit( precommitValidate ); + mSpinTwist = getChild("Twist End"); + childSetCommitCallback("Twist End",onCommitParametric,this); + mSpinTwist->setValidateBeforeCommit( &precommitValidate ); + + // Scale + mSpinScaleX = getChild("Taper Scale X"); + childSetCommitCallback("Taper Scale X",onCommitParametric,this); + mSpinScaleX->setValidateBeforeCommit( &precommitValidate ); + mSpinScaleY = getChild("Taper Scale Y"); + childSetCommitCallback("Taper Scale Y",onCommitParametric,this); + mSpinScaleY->setValidateBeforeCommit( &precommitValidate ); + + // Shear + mLabelShear = getChild("text topshear"); + mSpinShearX = getChild("Shear X"); + childSetCommitCallback("Shear X",onCommitParametric,this); + mSpinShearX->setValidateBeforeCommit( &precommitValidate ); + mSpinShearY = getChild("Shear Y"); + childSetCommitCallback("Shear Y",onCommitParametric,this); + mSpinShearY->setValidateBeforeCommit( &precommitValidate ); + + // Path / Profile + mCtrlPathBegin = getChild("Path Limit Begin"); + childSetCommitCallback("Path Limit Begin",onCommitParametric,this); + mCtrlPathBegin->setValidateBeforeCommit( &precommitValidate ); + mCtrlPathEnd = getChild("Path Limit End"); + childSetCommitCallback("Path Limit End",onCommitParametric,this); + mCtrlPathEnd->setValidateBeforeCommit( &precommitValidate ); + + // Taper + mLabelTaper = getChild("text taper2"); + mSpinTaperX = getChild("Taper X"); + childSetCommitCallback("Taper X",onCommitParametric,this); + mSpinTaperX->setValidateBeforeCommit( precommitValidate ); + mSpinTaperY = getChild("Taper Y"); + childSetCommitCallback("Taper Y",onCommitParametric,this); + mSpinTaperY->setValidateBeforeCommit( precommitValidate ); + + // Radius Offset / Revolutions + mLabelRadiusOffset = getChild("text radius delta"); + mLabelRevolutions = getChild("text revolutions"); + mSpinRadiusOffset = getChild("Radius Offset"); + childSetCommitCallback("Radius Offset",onCommitParametric,this); + mSpinRadiusOffset->setValidateBeforeCommit( &precommitValidate ); + mSpinRevolutions = getChild("Revolutions"); + childSetCommitCallback("Revolutions",onCommitParametric,this); + mSpinRevolutions->setValidateBeforeCommit( &precommitValidate ); + + // Sculpt + mCtrlSculptTexture = getChild("sculpt texture control"); + if (mCtrlSculptTexture) + { + mCtrlSculptTexture->setDefaultImageAssetID(LLUUID(SCULPT_DEFAULT_TEXTURE)); + mCtrlSculptTexture->setCommitCallback( boost::bind(&LLPanelObject::onCommitSculpt, this, _2 )); + mCtrlSculptTexture->setOnCancelCallback( boost::bind(&LLPanelObject::onCancelSculpt, this, _2 )); + mCtrlSculptTexture->setOnSelectCallback( boost::bind(&LLPanelObject::onSelectSculpt, this, _2 )); + mCtrlSculptTexture->setDropCallback( boost::bind(&LLPanelObject::onDropSculpt, this, _2 )); + // Don't allow (no copy) or (no transfer) textures to be selected during immediate mode + mCtrlSculptTexture->setImmediateFilterPermMask(PERM_COPY | PERM_TRANSFER); + mCtrlSculptTexture->setDnDFilterPermMask(PERM_COPY | PERM_TRANSFER); + LLAggregatePermissions texture_perms; + if (LLSelectMgr::getInstance()->selectGetAggregateTexturePermissions(texture_perms)) + { + BOOL can_copy = + texture_perms.getValue(PERM_COPY) == LLAggregatePermissions::AP_EMPTY || + texture_perms.getValue(PERM_COPY) == LLAggregatePermissions::AP_ALL; + BOOL can_transfer = + texture_perms.getValue(PERM_TRANSFER) == LLAggregatePermissions::AP_EMPTY || + texture_perms.getValue(PERM_TRANSFER) == LLAggregatePermissions::AP_ALL; + mCtrlSculptTexture->setCanApplyImmediately(can_copy && can_transfer); + } + else + { + mCtrlSculptTexture->setCanApplyImmediately(FALSE); + } + } + + mLabelSculptType = getChild("label sculpt type"); + mCtrlSculptType = getChild("sculpt type control"); + childSetCommitCallback("sculpt type control", onCommitSculptType, this); + mCtrlSculptMirror = getChild("sculpt mirror control"); + childSetCommitCallback("sculpt mirror control", onCommitSculptType, this); + mCtrlSculptInvert = getChild("sculpt invert control"); + childSetCommitCallback("sculpt invert control", onCommitSculptType, this); + + // Start with everyone disabled + clearCtrls(); + + return TRUE; } LLPanelObject::LLPanelObject() -: LLPanel(), - mIsPhysical(FALSE), - mIsTemporary(FALSE), - mIsPhantom(FALSE), - mSelectedType(MI_BOX), - mSculptTextureRevert(LLUUID::null), - mSculptTypeRevert(0), +: LLPanel(), + mIsPhysical(FALSE), + mIsTemporary(FALSE), + mIsPhantom(FALSE), + mSelectedType(MI_BOX), + mSculptTextureRevert(LLUUID::null), + mSculptTypeRevert(0), mHasClipboardPos(false), mHasClipboardSize(false), mHasClipboardRot(false), - mSizeChanged(FALSE) + mSizeChanged(FALSE) { mCommitCallbackRegistrar.add("PanelObject.menuDoToSelected", boost::bind(&LLPanelObject::menuDoToSelected, this, _2)); mEnableCallbackRegistrar.add("PanelObject.menuEnable", boost::bind(&LLPanelObject::menuEnableItem, this, _2)); @@ -303,1388 +303,1388 @@ LLPanelObject::LLPanelObject() LLPanelObject::~LLPanelObject() { - // Children all cleaned up by default view destructor. + // Children all cleaned up by default view destructor. } void LLPanelObject::getState( ) { - LLViewerObject* objectp = LLSelectMgr::getInstance()->getSelection()->getFirstRootObject(); - LLViewerObject* root_objectp = objectp; - if(!objectp) - { - objectp = LLSelectMgr::getInstance()->getSelection()->getFirstObject(); - // *FIX: shouldn't we just keep the child? - if (objectp) - { - LLViewerObject* parentp = objectp->getRootEdit(); - - if (parentp) - { - root_objectp = parentp; - } - else - { - root_objectp = objectp; - } - } - } - - LLCalc* calcp = LLCalc::getInstance(); - - LLVOVolume *volobjp = NULL; - if ( objectp && (objectp->getPCode() == LL_PCODE_VOLUME)) - { - volobjp = (LLVOVolume *)objectp; - } - - if( !objectp ) - { - //forfeit focus - if (gFocusMgr.childHasKeyboardFocus(this)) - { - gFocusMgr.setKeyboardFocus(NULL); - } - - // Disable all text input fields - clearCtrls(); - calcp->clearAllVariables(); - return; - } - - S32 selected_count = LLSelectMgr::getInstance()->getSelection()->getObjectCount(); - BOOL single_volume = (LLSelectMgr::getInstance()->selectionAllPCode( LL_PCODE_VOLUME )) - && (selected_count == 1); - - bool enable_move; - bool enable_modify; - - LLSelectMgr::getInstance()->selectGetEditMoveLinksetPermissions(enable_move, enable_modify); - - BOOL enable_scale = enable_modify; - BOOL enable_rotate = enable_move; // already accounts for a case of children, which needs permModify() as well - - LLVector3 vec; - if (enable_move) - { - vec = objectp->getPositionEdit(); - mCtrlPosX->set( vec.mV[VX] ); - mCtrlPosY->set( vec.mV[VY] ); - mCtrlPosZ->set( vec.mV[VZ] ); - calcp->setVar(LLCalc::X_POS, vec.mV[VX]); - calcp->setVar(LLCalc::Y_POS, vec.mV[VY]); - calcp->setVar(LLCalc::Z_POS, vec.mV[VZ]); - } - else - { - mCtrlPosX->clear(); - mCtrlPosY->clear(); - mCtrlPosZ->clear(); - calcp->clearVar(LLCalc::X_POS); - calcp->clearVar(LLCalc::Y_POS); - calcp->clearVar(LLCalc::Z_POS); - } - - mMenuClipboardPos->setEnabled(enable_move); - mLabelPosition->setEnabled( enable_move ); - mCtrlPosX->setEnabled(enable_move); - mCtrlPosY->setEnabled(enable_move); - mCtrlPosZ->setEnabled(enable_move); - - if (enable_scale) - { - vec = objectp->getScale(); - mCtrlScaleX->set( vec.mV[VX] ); - mCtrlScaleY->set( vec.mV[VY] ); - mCtrlScaleZ->set( vec.mV[VZ] ); - calcp->setVar(LLCalc::X_SCALE, vec.mV[VX]); - calcp->setVar(LLCalc::Y_SCALE, vec.mV[VY]); - calcp->setVar(LLCalc::Z_SCALE, vec.mV[VZ]); - } - else - { - mCtrlScaleX->clear(); - mCtrlScaleY->clear(); - mCtrlScaleZ->clear(); - calcp->setVar(LLCalc::X_SCALE, 0.f); - calcp->setVar(LLCalc::Y_SCALE, 0.f); - calcp->setVar(LLCalc::Z_SCALE, 0.f); - } - - mMenuClipboardSize->setEnabled(enable_scale); - mLabelSize->setEnabled( enable_scale ); - mCtrlScaleX->setEnabled( enable_scale ); - mCtrlScaleY->setEnabled( enable_scale ); - mCtrlScaleZ->setEnabled( enable_scale ); - - LLQuaternion object_rot = objectp->getRotationEdit(); - object_rot.getEulerAngles(&(mCurEulerDegrees.mV[VX]), &(mCurEulerDegrees.mV[VY]), &(mCurEulerDegrees.mV[VZ])); - mCurEulerDegrees *= RAD_TO_DEG; - mCurEulerDegrees.mV[VX] = fmod(ll_round(mCurEulerDegrees.mV[VX], OBJECT_ROTATION_PRECISION) + 360.f, 360.f); - mCurEulerDegrees.mV[VY] = fmod(ll_round(mCurEulerDegrees.mV[VY], OBJECT_ROTATION_PRECISION) + 360.f, 360.f); - mCurEulerDegrees.mV[VZ] = fmod(ll_round(mCurEulerDegrees.mV[VZ], OBJECT_ROTATION_PRECISION) + 360.f, 360.f); - - if (enable_rotate) - { - mCtrlRotX->set( mCurEulerDegrees.mV[VX] ); - mCtrlRotY->set( mCurEulerDegrees.mV[VY] ); - mCtrlRotZ->set( mCurEulerDegrees.mV[VZ] ); - calcp->setVar(LLCalc::X_ROT, mCurEulerDegrees.mV[VX]); - calcp->setVar(LLCalc::Y_ROT, mCurEulerDegrees.mV[VY]); - calcp->setVar(LLCalc::Z_ROT, mCurEulerDegrees.mV[VZ]); - } - else - { - mCtrlRotX->clear(); - mCtrlRotY->clear(); - mCtrlRotZ->clear(); - calcp->clearVar(LLCalc::X_ROT); - calcp->clearVar(LLCalc::Y_ROT); - calcp->clearVar(LLCalc::Z_ROT); - } - - mMenuClipboardRot->setEnabled(enable_rotate); - mLabelRotation->setEnabled( enable_rotate ); - mCtrlRotX->setEnabled( enable_rotate ); - mCtrlRotY->setEnabled( enable_rotate ); - mCtrlRotZ->setEnabled( enable_rotate ); - - LLUUID owner_id; - std::string owner_name; - LLSelectMgr::getInstance()->selectGetOwner(owner_id, owner_name); - - // BUG? Check for all objects being editable? - S32 roots_selected = LLSelectMgr::getInstance()->getSelection()->getRootObjectCount(); - BOOL editable = root_objectp->permModify(); - - BOOL is_flexible = volobjp && volobjp->isFlexible(); - BOOL is_permanent = root_objectp->flagObjectPermanent(); - BOOL is_permanent_enforced = root_objectp->isPermanentEnforced(); - BOOL is_character = root_objectp->flagCharacter(); - llassert(!is_permanent || !is_character); // should never have a permanent object that is also a character - - // Lock checkbox - only modifiable if you own the object. - BOOL self_owned = (gAgent.getID() == owner_id); - mCheckLock->setEnabled( roots_selected > 0 && self_owned && !is_permanent_enforced); - - // More lock and debit checkbox - get the values - BOOL valid; - U32 owner_mask_on; - U32 owner_mask_off; - valid = LLSelectMgr::getInstance()->selectGetPerm(PERM_OWNER, &owner_mask_on, &owner_mask_off); - - if(valid) - { - if(owner_mask_on & PERM_MOVE) - { - // owner can move, so not locked - mCheckLock->set(FALSE); - mCheckLock->setTentative(FALSE); - } - else if(owner_mask_off & PERM_MOVE) - { - // owner can't move, so locked - mCheckLock->set(TRUE); - mCheckLock->setTentative(FALSE); - } - else - { - // some locked, some not locked - mCheckLock->set(FALSE); - mCheckLock->setTentative(TRUE); - } - } - - // Physics checkbox - mIsPhysical = root_objectp->flagUsePhysics(); - llassert(!is_permanent || !mIsPhysical); // should never have a permanent object that is also physical - - mCheckPhysics->set( mIsPhysical ); - mCheckPhysics->setEnabled( roots_selected>0 - && (editable || gAgent.isGodlike()) - && !is_flexible && !is_permanent); - - mIsTemporary = root_objectp->flagTemporaryOnRez(); - llassert(!is_permanent || !mIsTemporary); // should never has a permanent object that is also temporary - - mCheckTemporary->set( mIsTemporary ); - mCheckTemporary->setEnabled( roots_selected>0 && editable && !is_permanent); - - mIsPhantom = root_objectp->flagPhantom(); - BOOL is_volume_detect = root_objectp->flagVolumeDetect(); - llassert(!is_character || !mIsPhantom); // should never have a character that is also a phantom - mCheckPhantom->set( mIsPhantom ); - mCheckPhantom->setEnabled( roots_selected>0 && editable && !is_flexible && !is_permanent_enforced && !is_character && !is_volume_detect); - - //---------------------------------------------------------------------------- - - S32 selected_item = MI_BOX; - S32 selected_hole = MI_HOLE_SAME; - BOOL enabled = FALSE; - BOOL hole_enabled = FALSE; - F32 scale_x=1.f, scale_y=1.f; - BOOL isMesh = FALSE; - - if( !objectp || !objectp->getVolume() || !editable || !single_volume) - { - // Clear out all geometry fields. - mComboBaseType->clear(); - mSpinHollow->clear(); - mSpinCutBegin->clear(); - mSpinCutEnd->clear(); - mCtrlPathBegin->clear(); - mCtrlPathEnd->clear(); - mSpinScaleX->clear(); - mSpinScaleY->clear(); - mSpinTwist->clear(); - mSpinTwistBegin->clear(); - mComboHoleType->clear(); - mSpinShearX->clear(); - mSpinShearY->clear(); - mSpinTaperX->clear(); - mSpinTaperY->clear(); - mSpinRadiusOffset->clear(); - mSpinRevolutions->clear(); - mSpinSkew->clear(); - - mSelectedType = MI_NONE; - } - else - { - // Only allowed to change these parameters for objects - // that you have permissions on AND are not attachments. - enabled = root_objectp->permModify() && !root_objectp->isPermanentEnforced(); - - // Volume type - const LLVolumeParams &volume_params = objectp->getVolume()->getParams(); - U8 path = volume_params.getPathParams().getCurveType(); - U8 profile_and_hole = volume_params.getProfileParams().getCurveType(); - U8 profile = profile_and_hole & LL_PCODE_PROFILE_MASK; - U8 hole = profile_and_hole & LL_PCODE_HOLE_MASK; - - // Scale goes first so we can differentiate between a sphere and a torus, - // which have the same profile and path types. - - // Scale - scale_x = volume_params.getRatioX(); - scale_y = volume_params.getRatioY(); - - BOOL linear_path = (path == LL_PCODE_PATH_LINE) || (path == LL_PCODE_PATH_FLEXIBLE); - if ( linear_path && profile == LL_PCODE_PROFILE_CIRCLE ) - { - selected_item = MI_CYLINDER; - } - else if ( linear_path && profile == LL_PCODE_PROFILE_SQUARE ) - { - selected_item = MI_BOX; - } - else if ( linear_path && profile == LL_PCODE_PROFILE_ISOTRI ) - { - selected_item = MI_PRISM; - } - else if ( linear_path && profile == LL_PCODE_PROFILE_EQUALTRI ) - { - selected_item = MI_PRISM; - } - else if ( linear_path && profile == LL_PCODE_PROFILE_RIGHTTRI ) - { - selected_item = MI_PRISM; - } - else if (path == LL_PCODE_PATH_FLEXIBLE) // shouldn't happen - { - selected_item = MI_CYLINDER; // reasonable default - } - else if ( path == LL_PCODE_PATH_CIRCLE && profile == LL_PCODE_PROFILE_CIRCLE && scale_y > 0.75f) - { - selected_item = MI_SPHERE; - } - else if ( path == LL_PCODE_PATH_CIRCLE && profile == LL_PCODE_PROFILE_CIRCLE && scale_y <= 0.75f) - { - selected_item = MI_TORUS; - } - else if ( path == LL_PCODE_PATH_CIRCLE && profile == LL_PCODE_PROFILE_CIRCLE_HALF) - { - selected_item = MI_SPHERE; - } - else if ( path == LL_PCODE_PATH_CIRCLE2 && profile == LL_PCODE_PROFILE_CIRCLE ) - { - // Spirals aren't supported. Make it into a sphere. JC - selected_item = MI_SPHERE; - } - else if ( path == LL_PCODE_PATH_CIRCLE && profile == LL_PCODE_PROFILE_EQUALTRI ) - { - selected_item = MI_RING; - } - else if ( path == LL_PCODE_PATH_CIRCLE && profile == LL_PCODE_PROFILE_SQUARE && scale_y <= 0.75f) - { - selected_item = MI_TUBE; - } - else - { - LL_INFOS("FloaterTools") << "Unknown path " << (S32) path << " profile " << (S32) profile << " in getState" << LL_ENDL; - selected_item = MI_BOX; - } - - - if (objectp->getParameterEntryInUse(LLNetworkData::PARAMS_SCULPT)) - { - selected_item = MI_SCULPT; - //LLFirstUse::useSculptedPrim(); - } - - - mComboBaseType ->setCurrentByIndex( selected_item ); - mSelectedType = selected_item; - - // Grab S path - F32 begin_s = volume_params.getBeginS(); - F32 end_s = volume_params.getEndS(); - - // Compute cut and advanced cut from S and T - F32 begin_t = volume_params.getBeginT(); - F32 end_t = volume_params.getEndT(); - - // Hollowness - F32 hollow = 100.f * volume_params.getHollow(); - mSpinHollow->set( hollow ); - calcp->setVar(LLCalc::HOLLOW, hollow); - // All hollow objects allow a shape to be selected. - if (hollow > 0.f) - { - switch (hole) - { - case LL_PCODE_HOLE_CIRCLE: - selected_hole = MI_HOLE_CIRCLE; - break; - case LL_PCODE_HOLE_SQUARE: - selected_hole = MI_HOLE_SQUARE; - break; - case LL_PCODE_HOLE_TRIANGLE: - selected_hole = MI_HOLE_TRIANGLE; - break; - case LL_PCODE_HOLE_SAME: - default: - selected_hole = MI_HOLE_SAME; - break; - } - mComboHoleType->setCurrentByIndex( selected_hole ); - hole_enabled = enabled; - } - else - { - mComboHoleType->setCurrentByIndex( MI_HOLE_SAME ); - hole_enabled = FALSE; - } - - // Cut interpretation varies based on base object type - F32 cut_begin, cut_end, adv_cut_begin, adv_cut_end; - - if ( selected_item == MI_SPHERE || selected_item == MI_TORUS || - selected_item == MI_TUBE || selected_item == MI_RING ) - { - cut_begin = begin_t; - cut_end = end_t; - adv_cut_begin = begin_s; - adv_cut_end = end_s; - } - else - { - cut_begin = begin_s; - cut_end = end_s; - adv_cut_begin = begin_t; - adv_cut_end = end_t; - } - - mSpinCutBegin ->set( cut_begin ); - mSpinCutEnd ->set( cut_end ); - mCtrlPathBegin ->set( adv_cut_begin ); - mCtrlPathEnd ->set( adv_cut_end ); - calcp->setVar(LLCalc::CUT_BEGIN, cut_begin); - calcp->setVar(LLCalc::CUT_END, cut_end); - calcp->setVar(LLCalc::PATH_BEGIN, adv_cut_begin); - calcp->setVar(LLCalc::PATH_END, adv_cut_end); - - // Twist - F32 twist = volume_params.getTwist(); - F32 twist_begin = volume_params.getTwistBegin(); - // Check the path type for conversion. - if (path == LL_PCODE_PATH_LINE || path == LL_PCODE_PATH_FLEXIBLE) - { - twist *= OBJECT_TWIST_LINEAR_MAX; - twist_begin *= OBJECT_TWIST_LINEAR_MAX; - } - else - { - twist *= OBJECT_TWIST_MAX; - twist_begin *= OBJECT_TWIST_MAX; - } - - mSpinTwist ->set( twist ); - mSpinTwistBegin ->set( twist_begin ); - calcp->setVar(LLCalc::TWIST_END, twist); - calcp->setVar(LLCalc::TWIST_BEGIN, twist_begin); - - // Shear - F32 shear_x = volume_params.getShearX(); - F32 shear_y = volume_params.getShearY(); - mSpinShearX->set( shear_x ); - mSpinShearY->set( shear_y ); - calcp->setVar(LLCalc::X_SHEAR, shear_x); - calcp->setVar(LLCalc::Y_SHEAR, shear_y); - - // Taper - F32 taper_x = volume_params.getTaperX(); - F32 taper_y = volume_params.getTaperY(); - mSpinTaperX->set( taper_x ); - mSpinTaperY->set( taper_y ); - calcp->setVar(LLCalc::X_TAPER, taper_x); - calcp->setVar(LLCalc::Y_TAPER, taper_y); - - // Radius offset. - F32 radius_offset = volume_params.getRadiusOffset(); - // Limit radius offset, based on taper and hole size y. - F32 radius_mag = fabs(radius_offset); - F32 hole_y_mag = fabs(scale_y); - F32 taper_y_mag = fabs(taper_y); - // Check to see if the taper effects us. - if ( (radius_offset > 0.f && taper_y < 0.f) || - (radius_offset < 0.f && taper_y > 0.f) ) - { - // The taper does not help increase the radius offset range. - taper_y_mag = 0.f; - } - F32 max_radius_mag = 1.f - hole_y_mag * (1.f - taper_y_mag) / (1.f - hole_y_mag); - // Enforce the maximum magnitude. - if (radius_mag > max_radius_mag) - { - // Check radius offset sign. - if (radius_offset < 0.f) - { - radius_offset = -max_radius_mag; - } - else - { - radius_offset = max_radius_mag; - } - } - mSpinRadiusOffset->set( radius_offset); - calcp->setVar(LLCalc::RADIUS_OFFSET, radius_offset); - - // Revolutions - F32 revolutions = volume_params.getRevolutions(); - mSpinRevolutions->set( revolutions ); - calcp->setVar(LLCalc::REVOLUTIONS, revolutions); - - // Skew - F32 skew = volume_params.getSkew(); - // Limit skew, based on revolutions hole size x. - F32 skew_mag= fabs(skew); - F32 min_skew_mag = 1.0f - 1.0f / (revolutions * scale_x + 1.0f); - // Discontinuity; A revolution of 1 allows skews below 0.5. - if ( fabs(revolutions - 1.0f) < 0.001) - min_skew_mag = 0.0f; - - // Clip skew. - if (skew_mag < min_skew_mag) - { - // Check skew sign. - if (skew < 0.0f) - { - skew = -min_skew_mag; - } - else - { - skew = min_skew_mag; - } - } - mSpinSkew->set( skew ); - calcp->setVar(LLCalc::SKEW, skew); - } - - // Compute control visibility, label names, and twist range. - // Start with defaults. - BOOL cut_visible = TRUE; - BOOL hollow_visible = TRUE; - BOOL top_size_x_visible = TRUE; - BOOL top_size_y_visible = TRUE; - BOOL top_shear_x_visible = TRUE; - BOOL top_shear_y_visible = TRUE; - BOOL twist_visible = TRUE; - BOOL advanced_cut_visible = FALSE; - BOOL taper_visible = FALSE; - BOOL skew_visible = FALSE; - BOOL radius_offset_visible = FALSE; - BOOL revolutions_visible = FALSE; - BOOL sculpt_texture_visible = FALSE; - F32 twist_min = OBJECT_TWIST_LINEAR_MIN; - F32 twist_max = OBJECT_TWIST_LINEAR_MAX; - F32 twist_inc = OBJECT_TWIST_LINEAR_INC; - - BOOL advanced_is_dimple = FALSE; - BOOL advanced_is_slice = FALSE; - BOOL size_is_hole = FALSE; - - // Tune based on overall volume type - switch (selected_item) - { - case MI_SPHERE: - top_size_x_visible = FALSE; - top_size_y_visible = FALSE; - top_shear_x_visible = FALSE; - top_shear_y_visible = FALSE; - //twist_visible = FALSE; - advanced_cut_visible = TRUE; - advanced_is_dimple = TRUE; - twist_min = OBJECT_TWIST_MIN; - twist_max = OBJECT_TWIST_MAX; - twist_inc = OBJECT_TWIST_INC; - break; - - case MI_TORUS: - case MI_TUBE: - case MI_RING: - //top_size_x_visible = FALSE; - //top_size_y_visible = FALSE; - size_is_hole = TRUE; - skew_visible = TRUE; - advanced_cut_visible = TRUE; - taper_visible = TRUE; - radius_offset_visible = TRUE; - revolutions_visible = TRUE; - twist_min = OBJECT_TWIST_MIN; - twist_max = OBJECT_TWIST_MAX; - twist_inc = OBJECT_TWIST_INC; - - break; - - case MI_SCULPT: - cut_visible = FALSE; - hollow_visible = FALSE; - twist_visible = FALSE; - top_size_x_visible = FALSE; - top_size_y_visible = FALSE; - top_shear_x_visible = FALSE; - top_shear_y_visible = FALSE; - skew_visible = FALSE; - advanced_cut_visible = FALSE; - taper_visible = FALSE; - radius_offset_visible = FALSE; - revolutions_visible = FALSE; - sculpt_texture_visible = TRUE; - - break; - - case MI_BOX: - advanced_cut_visible = TRUE; - advanced_is_slice = TRUE; - break; - - case MI_CYLINDER: - advanced_cut_visible = TRUE; - advanced_is_slice = TRUE; - break; - - case MI_PRISM: - advanced_cut_visible = TRUE; - advanced_is_slice = TRUE; - break; - - default: - break; - } - - // Check if we need to change top size/hole size params. - switch (selected_item) - { - case MI_SPHERE: - case MI_TORUS: - case MI_TUBE: - case MI_RING: - mSpinScaleX->set( scale_x ); - mSpinScaleY->set( scale_y ); - calcp->setVar(LLCalc::X_HOLE, scale_x); - calcp->setVar(LLCalc::Y_HOLE, scale_y); - mSpinScaleX->setMinValue(OBJECT_MIN_HOLE_SIZE); - mSpinScaleX->setMaxValue(OBJECT_MAX_HOLE_SIZE_X); - mSpinScaleY->setMinValue(OBJECT_MIN_HOLE_SIZE); - mSpinScaleY->setMaxValue(OBJECT_MAX_HOLE_SIZE_Y); - break; - default: - if (editable && single_volume) - { - mSpinScaleX->set( 1.f - scale_x ); - mSpinScaleY->set( 1.f - scale_y ); - mSpinScaleX->setMinValue(-1.f); - mSpinScaleX->setMaxValue(1.f); - mSpinScaleY->setMinValue(-1.f); - mSpinScaleY->setMaxValue(1.f); - - // Torus' Hole Size is Box/Cyl/Prism's Taper - calcp->setVar(LLCalc::X_TAPER, 1.f - scale_x); - calcp->setVar(LLCalc::Y_TAPER, 1.f - scale_y); - - // Box/Cyl/Prism have no hole size - calcp->setVar(LLCalc::X_HOLE, 0.f); - calcp->setVar(LLCalc::Y_HOLE, 0.f); - } - break; - } - - // Check if we need to limit the hollow based on the hole type. - if ( selected_hole == MI_HOLE_SQUARE && - ( selected_item == MI_CYLINDER || selected_item == MI_TORUS || - selected_item == MI_PRISM || selected_item == MI_RING || - selected_item == MI_SPHERE ) ) - { - mSpinHollow->setMinValue(0.f); - mSpinHollow->setMaxValue(70.f); - } - else - { - mSpinHollow->setMinValue(0.f); - mSpinHollow->setMaxValue(95.f); - } - - // Update field enablement - mComboBaseType ->setEnabled( enabled ); - mMenuClipboardParams->setEnabled(enabled); - - mLabelCut ->setEnabled( enabled ); - mSpinCutBegin ->setEnabled( enabled ); - mSpinCutEnd ->setEnabled( enabled ); - - mLabelHollow ->setEnabled( enabled ); - mSpinHollow ->setEnabled( enabled ); - mLabelHoleType ->setEnabled( hole_enabled ); - mComboHoleType ->setEnabled( hole_enabled ); - - mLabelTwist ->setEnabled( enabled ); - mSpinTwist ->setEnabled( enabled ); - mSpinTwistBegin ->setEnabled( enabled ); - - mLabelSkew ->setEnabled( enabled ); - mSpinSkew ->setEnabled( enabled ); - - getChildView("scale_hole")->setVisible( FALSE); - getChildView("scale_taper")->setVisible( FALSE); - if (top_size_x_visible || top_size_y_visible) - { - if (size_is_hole) - { - getChildView("scale_hole")->setVisible( TRUE); - getChildView("scale_hole")->setEnabled(enabled); - } - else - { - getChildView("scale_taper")->setVisible( TRUE); - getChildView("scale_taper")->setEnabled(enabled); - } - } - - mSpinScaleX ->setEnabled( enabled ); - mSpinScaleY ->setEnabled( enabled ); - - mLabelShear ->setEnabled( enabled ); - mSpinShearX ->setEnabled( enabled ); - mSpinShearY ->setEnabled( enabled ); - - getChildView("advanced_cut")->setVisible( FALSE); - getChildView("advanced_dimple")->setVisible( FALSE); - getChildView("advanced_slice")->setVisible( FALSE); - - if (advanced_cut_visible) - { - if (advanced_is_dimple) - { - getChildView("advanced_dimple")->setVisible( TRUE); - getChildView("advanced_dimple")->setEnabled(enabled); - } - - else if (advanced_is_slice) - { - getChildView("advanced_slice")->setVisible( TRUE); - getChildView("advanced_slice")->setEnabled(enabled); - } - else - { - getChildView("advanced_cut")->setVisible( TRUE); - getChildView("advanced_cut")->setEnabled(enabled); - } - } - - mCtrlPathBegin ->setEnabled( enabled ); - mCtrlPathEnd ->setEnabled( enabled ); - - mLabelTaper ->setEnabled( enabled ); - mSpinTaperX ->setEnabled( enabled ); - mSpinTaperY ->setEnabled( enabled ); - - mLabelRadiusOffset->setEnabled( enabled ); - mSpinRadiusOffset ->setEnabled( enabled ); - - mLabelRevolutions->setEnabled( enabled ); - mSpinRevolutions ->setEnabled( enabled ); - - // Update field visibility - mLabelCut ->setVisible( cut_visible ); - mSpinCutBegin ->setVisible( cut_visible ); - mSpinCutEnd ->setVisible( cut_visible ); - - mLabelHollow ->setVisible( hollow_visible ); - mSpinHollow ->setVisible( hollow_visible ); - mLabelHoleType ->setVisible( hollow_visible ); - mComboHoleType ->setVisible( hollow_visible ); - - mLabelTwist ->setVisible( twist_visible ); - mSpinTwist ->setVisible( twist_visible ); - mSpinTwistBegin ->setVisible( twist_visible ); - mSpinTwist ->setMinValue( twist_min ); - mSpinTwist ->setMaxValue( twist_max ); - mSpinTwist ->setIncrement( twist_inc ); - mSpinTwistBegin ->setMinValue( twist_min ); - mSpinTwistBegin ->setMaxValue( twist_max ); - mSpinTwistBegin ->setIncrement( twist_inc ); - - mSpinScaleX ->setVisible( top_size_x_visible ); - mSpinScaleY ->setVisible( top_size_y_visible ); - - mLabelSkew ->setVisible( skew_visible ); - mSpinSkew ->setVisible( skew_visible ); - - mLabelShear ->setVisible( top_shear_x_visible || top_shear_y_visible ); - mSpinShearX ->setVisible( top_shear_x_visible ); - mSpinShearY ->setVisible( top_shear_y_visible ); - - mCtrlPathBegin ->setVisible( advanced_cut_visible ); - mCtrlPathEnd ->setVisible( advanced_cut_visible ); - - mLabelTaper ->setVisible( taper_visible ); - mSpinTaperX ->setVisible( taper_visible ); - mSpinTaperY ->setVisible( taper_visible ); - - mLabelRadiusOffset->setVisible( radius_offset_visible ); - mSpinRadiusOffset ->setVisible( radius_offset_visible ); - - mLabelRevolutions->setVisible( revolutions_visible ); - mSpinRevolutions ->setVisible( revolutions_visible ); - - mCtrlSculptTexture->setVisible(sculpt_texture_visible); - mLabelSculptType->setVisible(sculpt_texture_visible); - mCtrlSculptType->setVisible(sculpt_texture_visible); - - - // sculpt texture - if (selected_item == MI_SCULPT) - { - - - LLUUID id; - LLSculptParams *sculpt_params = (LLSculptParams *)objectp->getParameterEntry(LLNetworkData::PARAMS_SCULPT); - - - if (sculpt_params) // if we have a legal sculpt param block for this object: - { - if (mObject != objectp) // we've just selected a new object, so save for undo - { - mSculptTextureRevert = sculpt_params->getSculptTexture(); - mSculptTypeRevert = sculpt_params->getSculptType(); - } - - U8 sculpt_type = sculpt_params->getSculptType(); - U8 sculpt_stitching = sculpt_type & LL_SCULPT_TYPE_MASK; - BOOL sculpt_invert = sculpt_type & LL_SCULPT_FLAG_INVERT; - BOOL sculpt_mirror = sculpt_type & LL_SCULPT_FLAG_MIRROR; - isMesh = (sculpt_stitching == LL_SCULPT_TYPE_MESH); - - LLTextureCtrl* mTextureCtrl = getChild("sculpt texture control"); - if(mTextureCtrl) - { - mTextureCtrl->setTentative(FALSE); - mTextureCtrl->setEnabled(editable && !isMesh); - if (editable) - mTextureCtrl->setImageAssetID(sculpt_params->getSculptTexture()); - else - mTextureCtrl->setImageAssetID(LLUUID::null); - } - - mComboBaseType->setEnabled(!isMesh); - mMenuClipboardParams->setEnabled(!isMesh); - - if (mCtrlSculptType) - { - if (sculpt_stitching == LL_SCULPT_TYPE_NONE) - { - // since 'None' is no longer an option in the combo box - // use 'Plane' as an equivalent sculpt type - mCtrlSculptType->setSelectedByValue(LLSD(LL_SCULPT_TYPE_PLANE), true); - } - else - { - mCtrlSculptType->setSelectedByValue(LLSD(sculpt_stitching), true); - } - mCtrlSculptType->setEnabled(editable && !isMesh); - } - - if (mCtrlSculptMirror) - { - mCtrlSculptMirror->set(sculpt_mirror); - mCtrlSculptMirror->setEnabled(editable && !isMesh); - } - - if (mCtrlSculptInvert) - { - mCtrlSculptInvert->set(sculpt_invert); - mCtrlSculptInvert->setEnabled(editable); - } - - if (mLabelSculptType) - { - mLabelSculptType->setEnabled(TRUE); - } - - } - } - else - { - mSculptTextureRevert = LLUUID::null; - } - - mCtrlSculptMirror->setVisible(sculpt_texture_visible && !isMesh); - mCtrlSculptInvert->setVisible(sculpt_texture_visible && !isMesh); - - //---------------------------------------------------------------------------- - - mObject = objectp; - mRootObject = root_objectp; + LLViewerObject* objectp = LLSelectMgr::getInstance()->getSelection()->getFirstRootObject(); + LLViewerObject* root_objectp = objectp; + if(!objectp) + { + objectp = LLSelectMgr::getInstance()->getSelection()->getFirstObject(); + // *FIX: shouldn't we just keep the child? + if (objectp) + { + LLViewerObject* parentp = objectp->getRootEdit(); + + if (parentp) + { + root_objectp = parentp; + } + else + { + root_objectp = objectp; + } + } + } + + LLCalc* calcp = LLCalc::getInstance(); + + LLVOVolume *volobjp = NULL; + if ( objectp && (objectp->getPCode() == LL_PCODE_VOLUME)) + { + volobjp = (LLVOVolume *)objectp; + } + + if( !objectp ) + { + //forfeit focus + if (gFocusMgr.childHasKeyboardFocus(this)) + { + gFocusMgr.setKeyboardFocus(NULL); + } + + // Disable all text input fields + clearCtrls(); + calcp->clearAllVariables(); + return; + } + + S32 selected_count = LLSelectMgr::getInstance()->getSelection()->getObjectCount(); + BOOL single_volume = (LLSelectMgr::getInstance()->selectionAllPCode( LL_PCODE_VOLUME )) + && (selected_count == 1); + + bool enable_move; + bool enable_modify; + + LLSelectMgr::getInstance()->selectGetEditMoveLinksetPermissions(enable_move, enable_modify); + + BOOL enable_scale = enable_modify; + BOOL enable_rotate = enable_move; // already accounts for a case of children, which needs permModify() as well + + LLVector3 vec; + if (enable_move) + { + vec = objectp->getPositionEdit(); + mCtrlPosX->set( vec.mV[VX] ); + mCtrlPosY->set( vec.mV[VY] ); + mCtrlPosZ->set( vec.mV[VZ] ); + calcp->setVar(LLCalc::X_POS, vec.mV[VX]); + calcp->setVar(LLCalc::Y_POS, vec.mV[VY]); + calcp->setVar(LLCalc::Z_POS, vec.mV[VZ]); + } + else + { + mCtrlPosX->clear(); + mCtrlPosY->clear(); + mCtrlPosZ->clear(); + calcp->clearVar(LLCalc::X_POS); + calcp->clearVar(LLCalc::Y_POS); + calcp->clearVar(LLCalc::Z_POS); + } + + mMenuClipboardPos->setEnabled(enable_move); + mLabelPosition->setEnabled( enable_move ); + mCtrlPosX->setEnabled(enable_move); + mCtrlPosY->setEnabled(enable_move); + mCtrlPosZ->setEnabled(enable_move); + + if (enable_scale) + { + vec = objectp->getScale(); + mCtrlScaleX->set( vec.mV[VX] ); + mCtrlScaleY->set( vec.mV[VY] ); + mCtrlScaleZ->set( vec.mV[VZ] ); + calcp->setVar(LLCalc::X_SCALE, vec.mV[VX]); + calcp->setVar(LLCalc::Y_SCALE, vec.mV[VY]); + calcp->setVar(LLCalc::Z_SCALE, vec.mV[VZ]); + } + else + { + mCtrlScaleX->clear(); + mCtrlScaleY->clear(); + mCtrlScaleZ->clear(); + calcp->setVar(LLCalc::X_SCALE, 0.f); + calcp->setVar(LLCalc::Y_SCALE, 0.f); + calcp->setVar(LLCalc::Z_SCALE, 0.f); + } + + mMenuClipboardSize->setEnabled(enable_scale); + mLabelSize->setEnabled( enable_scale ); + mCtrlScaleX->setEnabled( enable_scale ); + mCtrlScaleY->setEnabled( enable_scale ); + mCtrlScaleZ->setEnabled( enable_scale ); + + LLQuaternion object_rot = objectp->getRotationEdit(); + object_rot.getEulerAngles(&(mCurEulerDegrees.mV[VX]), &(mCurEulerDegrees.mV[VY]), &(mCurEulerDegrees.mV[VZ])); + mCurEulerDegrees *= RAD_TO_DEG; + mCurEulerDegrees.mV[VX] = fmod(ll_round(mCurEulerDegrees.mV[VX], OBJECT_ROTATION_PRECISION) + 360.f, 360.f); + mCurEulerDegrees.mV[VY] = fmod(ll_round(mCurEulerDegrees.mV[VY], OBJECT_ROTATION_PRECISION) + 360.f, 360.f); + mCurEulerDegrees.mV[VZ] = fmod(ll_round(mCurEulerDegrees.mV[VZ], OBJECT_ROTATION_PRECISION) + 360.f, 360.f); + + if (enable_rotate) + { + mCtrlRotX->set( mCurEulerDegrees.mV[VX] ); + mCtrlRotY->set( mCurEulerDegrees.mV[VY] ); + mCtrlRotZ->set( mCurEulerDegrees.mV[VZ] ); + calcp->setVar(LLCalc::X_ROT, mCurEulerDegrees.mV[VX]); + calcp->setVar(LLCalc::Y_ROT, mCurEulerDegrees.mV[VY]); + calcp->setVar(LLCalc::Z_ROT, mCurEulerDegrees.mV[VZ]); + } + else + { + mCtrlRotX->clear(); + mCtrlRotY->clear(); + mCtrlRotZ->clear(); + calcp->clearVar(LLCalc::X_ROT); + calcp->clearVar(LLCalc::Y_ROT); + calcp->clearVar(LLCalc::Z_ROT); + } + + mMenuClipboardRot->setEnabled(enable_rotate); + mLabelRotation->setEnabled( enable_rotate ); + mCtrlRotX->setEnabled( enable_rotate ); + mCtrlRotY->setEnabled( enable_rotate ); + mCtrlRotZ->setEnabled( enable_rotate ); + + LLUUID owner_id; + std::string owner_name; + LLSelectMgr::getInstance()->selectGetOwner(owner_id, owner_name); + + // BUG? Check for all objects being editable? + S32 roots_selected = LLSelectMgr::getInstance()->getSelection()->getRootObjectCount(); + BOOL editable = root_objectp->permModify(); + + BOOL is_flexible = volobjp && volobjp->isFlexible(); + BOOL is_permanent = root_objectp->flagObjectPermanent(); + BOOL is_permanent_enforced = root_objectp->isPermanentEnforced(); + BOOL is_character = root_objectp->flagCharacter(); + llassert(!is_permanent || !is_character); // should never have a permanent object that is also a character + + // Lock checkbox - only modifiable if you own the object. + BOOL self_owned = (gAgent.getID() == owner_id); + mCheckLock->setEnabled( roots_selected > 0 && self_owned && !is_permanent_enforced); + + // More lock and debit checkbox - get the values + BOOL valid; + U32 owner_mask_on; + U32 owner_mask_off; + valid = LLSelectMgr::getInstance()->selectGetPerm(PERM_OWNER, &owner_mask_on, &owner_mask_off); + + if(valid) + { + if(owner_mask_on & PERM_MOVE) + { + // owner can move, so not locked + mCheckLock->set(FALSE); + mCheckLock->setTentative(FALSE); + } + else if(owner_mask_off & PERM_MOVE) + { + // owner can't move, so locked + mCheckLock->set(TRUE); + mCheckLock->setTentative(FALSE); + } + else + { + // some locked, some not locked + mCheckLock->set(FALSE); + mCheckLock->setTentative(TRUE); + } + } + + // Physics checkbox + mIsPhysical = root_objectp->flagUsePhysics(); + llassert(!is_permanent || !mIsPhysical); // should never have a permanent object that is also physical + + mCheckPhysics->set( mIsPhysical ); + mCheckPhysics->setEnabled( roots_selected>0 + && (editable || gAgent.isGodlike()) + && !is_flexible && !is_permanent); + + mIsTemporary = root_objectp->flagTemporaryOnRez(); + llassert(!is_permanent || !mIsTemporary); // should never has a permanent object that is also temporary + + mCheckTemporary->set( mIsTemporary ); + mCheckTemporary->setEnabled( roots_selected>0 && editable && !is_permanent); + + mIsPhantom = root_objectp->flagPhantom(); + BOOL is_volume_detect = root_objectp->flagVolumeDetect(); + llassert(!is_character || !mIsPhantom); // should never have a character that is also a phantom + mCheckPhantom->set( mIsPhantom ); + mCheckPhantom->setEnabled( roots_selected>0 && editable && !is_flexible && !is_permanent_enforced && !is_character && !is_volume_detect); + + //---------------------------------------------------------------------------- + + S32 selected_item = MI_BOX; + S32 selected_hole = MI_HOLE_SAME; + BOOL enabled = FALSE; + BOOL hole_enabled = FALSE; + F32 scale_x=1.f, scale_y=1.f; + BOOL isMesh = FALSE; + + if( !objectp || !objectp->getVolume() || !editable || !single_volume) + { + // Clear out all geometry fields. + mComboBaseType->clear(); + mSpinHollow->clear(); + mSpinCutBegin->clear(); + mSpinCutEnd->clear(); + mCtrlPathBegin->clear(); + mCtrlPathEnd->clear(); + mSpinScaleX->clear(); + mSpinScaleY->clear(); + mSpinTwist->clear(); + mSpinTwistBegin->clear(); + mComboHoleType->clear(); + mSpinShearX->clear(); + mSpinShearY->clear(); + mSpinTaperX->clear(); + mSpinTaperY->clear(); + mSpinRadiusOffset->clear(); + mSpinRevolutions->clear(); + mSpinSkew->clear(); + + mSelectedType = MI_NONE; + } + else + { + // Only allowed to change these parameters for objects + // that you have permissions on AND are not attachments. + enabled = root_objectp->permModify() && !root_objectp->isPermanentEnforced(); + + // Volume type + const LLVolumeParams &volume_params = objectp->getVolume()->getParams(); + U8 path = volume_params.getPathParams().getCurveType(); + U8 profile_and_hole = volume_params.getProfileParams().getCurveType(); + U8 profile = profile_and_hole & LL_PCODE_PROFILE_MASK; + U8 hole = profile_and_hole & LL_PCODE_HOLE_MASK; + + // Scale goes first so we can differentiate between a sphere and a torus, + // which have the same profile and path types. + + // Scale + scale_x = volume_params.getRatioX(); + scale_y = volume_params.getRatioY(); + + BOOL linear_path = (path == LL_PCODE_PATH_LINE) || (path == LL_PCODE_PATH_FLEXIBLE); + if ( linear_path && profile == LL_PCODE_PROFILE_CIRCLE ) + { + selected_item = MI_CYLINDER; + } + else if ( linear_path && profile == LL_PCODE_PROFILE_SQUARE ) + { + selected_item = MI_BOX; + } + else if ( linear_path && profile == LL_PCODE_PROFILE_ISOTRI ) + { + selected_item = MI_PRISM; + } + else if ( linear_path && profile == LL_PCODE_PROFILE_EQUALTRI ) + { + selected_item = MI_PRISM; + } + else if ( linear_path && profile == LL_PCODE_PROFILE_RIGHTTRI ) + { + selected_item = MI_PRISM; + } + else if (path == LL_PCODE_PATH_FLEXIBLE) // shouldn't happen + { + selected_item = MI_CYLINDER; // reasonable default + } + else if ( path == LL_PCODE_PATH_CIRCLE && profile == LL_PCODE_PROFILE_CIRCLE && scale_y > 0.75f) + { + selected_item = MI_SPHERE; + } + else if ( path == LL_PCODE_PATH_CIRCLE && profile == LL_PCODE_PROFILE_CIRCLE && scale_y <= 0.75f) + { + selected_item = MI_TORUS; + } + else if ( path == LL_PCODE_PATH_CIRCLE && profile == LL_PCODE_PROFILE_CIRCLE_HALF) + { + selected_item = MI_SPHERE; + } + else if ( path == LL_PCODE_PATH_CIRCLE2 && profile == LL_PCODE_PROFILE_CIRCLE ) + { + // Spirals aren't supported. Make it into a sphere. JC + selected_item = MI_SPHERE; + } + else if ( path == LL_PCODE_PATH_CIRCLE && profile == LL_PCODE_PROFILE_EQUALTRI ) + { + selected_item = MI_RING; + } + else if ( path == LL_PCODE_PATH_CIRCLE && profile == LL_PCODE_PROFILE_SQUARE && scale_y <= 0.75f) + { + selected_item = MI_TUBE; + } + else + { + LL_INFOS("FloaterTools") << "Unknown path " << (S32) path << " profile " << (S32) profile << " in getState" << LL_ENDL; + selected_item = MI_BOX; + } + + + if (objectp->getParameterEntryInUse(LLNetworkData::PARAMS_SCULPT)) + { + selected_item = MI_SCULPT; + //LLFirstUse::useSculptedPrim(); + } + + + mComboBaseType ->setCurrentByIndex( selected_item ); + mSelectedType = selected_item; + + // Grab S path + F32 begin_s = volume_params.getBeginS(); + F32 end_s = volume_params.getEndS(); + + // Compute cut and advanced cut from S and T + F32 begin_t = volume_params.getBeginT(); + F32 end_t = volume_params.getEndT(); + + // Hollowness + F32 hollow = 100.f * volume_params.getHollow(); + mSpinHollow->set( hollow ); + calcp->setVar(LLCalc::HOLLOW, hollow); + // All hollow objects allow a shape to be selected. + if (hollow > 0.f) + { + switch (hole) + { + case LL_PCODE_HOLE_CIRCLE: + selected_hole = MI_HOLE_CIRCLE; + break; + case LL_PCODE_HOLE_SQUARE: + selected_hole = MI_HOLE_SQUARE; + break; + case LL_PCODE_HOLE_TRIANGLE: + selected_hole = MI_HOLE_TRIANGLE; + break; + case LL_PCODE_HOLE_SAME: + default: + selected_hole = MI_HOLE_SAME; + break; + } + mComboHoleType->setCurrentByIndex( selected_hole ); + hole_enabled = enabled; + } + else + { + mComboHoleType->setCurrentByIndex( MI_HOLE_SAME ); + hole_enabled = FALSE; + } + + // Cut interpretation varies based on base object type + F32 cut_begin, cut_end, adv_cut_begin, adv_cut_end; + + if ( selected_item == MI_SPHERE || selected_item == MI_TORUS || + selected_item == MI_TUBE || selected_item == MI_RING ) + { + cut_begin = begin_t; + cut_end = end_t; + adv_cut_begin = begin_s; + adv_cut_end = end_s; + } + else + { + cut_begin = begin_s; + cut_end = end_s; + adv_cut_begin = begin_t; + adv_cut_end = end_t; + } + + mSpinCutBegin ->set( cut_begin ); + mSpinCutEnd ->set( cut_end ); + mCtrlPathBegin ->set( adv_cut_begin ); + mCtrlPathEnd ->set( adv_cut_end ); + calcp->setVar(LLCalc::CUT_BEGIN, cut_begin); + calcp->setVar(LLCalc::CUT_END, cut_end); + calcp->setVar(LLCalc::PATH_BEGIN, adv_cut_begin); + calcp->setVar(LLCalc::PATH_END, adv_cut_end); + + // Twist + F32 twist = volume_params.getTwist(); + F32 twist_begin = volume_params.getTwistBegin(); + // Check the path type for conversion. + if (path == LL_PCODE_PATH_LINE || path == LL_PCODE_PATH_FLEXIBLE) + { + twist *= OBJECT_TWIST_LINEAR_MAX; + twist_begin *= OBJECT_TWIST_LINEAR_MAX; + } + else + { + twist *= OBJECT_TWIST_MAX; + twist_begin *= OBJECT_TWIST_MAX; + } + + mSpinTwist ->set( twist ); + mSpinTwistBegin ->set( twist_begin ); + calcp->setVar(LLCalc::TWIST_END, twist); + calcp->setVar(LLCalc::TWIST_BEGIN, twist_begin); + + // Shear + F32 shear_x = volume_params.getShearX(); + F32 shear_y = volume_params.getShearY(); + mSpinShearX->set( shear_x ); + mSpinShearY->set( shear_y ); + calcp->setVar(LLCalc::X_SHEAR, shear_x); + calcp->setVar(LLCalc::Y_SHEAR, shear_y); + + // Taper + F32 taper_x = volume_params.getTaperX(); + F32 taper_y = volume_params.getTaperY(); + mSpinTaperX->set( taper_x ); + mSpinTaperY->set( taper_y ); + calcp->setVar(LLCalc::X_TAPER, taper_x); + calcp->setVar(LLCalc::Y_TAPER, taper_y); + + // Radius offset. + F32 radius_offset = volume_params.getRadiusOffset(); + // Limit radius offset, based on taper and hole size y. + F32 radius_mag = fabs(radius_offset); + F32 hole_y_mag = fabs(scale_y); + F32 taper_y_mag = fabs(taper_y); + // Check to see if the taper effects us. + if ( (radius_offset > 0.f && taper_y < 0.f) || + (radius_offset < 0.f && taper_y > 0.f) ) + { + // The taper does not help increase the radius offset range. + taper_y_mag = 0.f; + } + F32 max_radius_mag = 1.f - hole_y_mag * (1.f - taper_y_mag) / (1.f - hole_y_mag); + // Enforce the maximum magnitude. + if (radius_mag > max_radius_mag) + { + // Check radius offset sign. + if (radius_offset < 0.f) + { + radius_offset = -max_radius_mag; + } + else + { + radius_offset = max_radius_mag; + } + } + mSpinRadiusOffset->set( radius_offset); + calcp->setVar(LLCalc::RADIUS_OFFSET, radius_offset); + + // Revolutions + F32 revolutions = volume_params.getRevolutions(); + mSpinRevolutions->set( revolutions ); + calcp->setVar(LLCalc::REVOLUTIONS, revolutions); + + // Skew + F32 skew = volume_params.getSkew(); + // Limit skew, based on revolutions hole size x. + F32 skew_mag= fabs(skew); + F32 min_skew_mag = 1.0f - 1.0f / (revolutions * scale_x + 1.0f); + // Discontinuity; A revolution of 1 allows skews below 0.5. + if ( fabs(revolutions - 1.0f) < 0.001) + min_skew_mag = 0.0f; + + // Clip skew. + if (skew_mag < min_skew_mag) + { + // Check skew sign. + if (skew < 0.0f) + { + skew = -min_skew_mag; + } + else + { + skew = min_skew_mag; + } + } + mSpinSkew->set( skew ); + calcp->setVar(LLCalc::SKEW, skew); + } + + // Compute control visibility, label names, and twist range. + // Start with defaults. + BOOL cut_visible = TRUE; + BOOL hollow_visible = TRUE; + BOOL top_size_x_visible = TRUE; + BOOL top_size_y_visible = TRUE; + BOOL top_shear_x_visible = TRUE; + BOOL top_shear_y_visible = TRUE; + BOOL twist_visible = TRUE; + BOOL advanced_cut_visible = FALSE; + BOOL taper_visible = FALSE; + BOOL skew_visible = FALSE; + BOOL radius_offset_visible = FALSE; + BOOL revolutions_visible = FALSE; + BOOL sculpt_texture_visible = FALSE; + F32 twist_min = OBJECT_TWIST_LINEAR_MIN; + F32 twist_max = OBJECT_TWIST_LINEAR_MAX; + F32 twist_inc = OBJECT_TWIST_LINEAR_INC; + + BOOL advanced_is_dimple = FALSE; + BOOL advanced_is_slice = FALSE; + BOOL size_is_hole = FALSE; + + // Tune based on overall volume type + switch (selected_item) + { + case MI_SPHERE: + top_size_x_visible = FALSE; + top_size_y_visible = FALSE; + top_shear_x_visible = FALSE; + top_shear_y_visible = FALSE; + //twist_visible = FALSE; + advanced_cut_visible = TRUE; + advanced_is_dimple = TRUE; + twist_min = OBJECT_TWIST_MIN; + twist_max = OBJECT_TWIST_MAX; + twist_inc = OBJECT_TWIST_INC; + break; + + case MI_TORUS: + case MI_TUBE: + case MI_RING: + //top_size_x_visible = FALSE; + //top_size_y_visible = FALSE; + size_is_hole = TRUE; + skew_visible = TRUE; + advanced_cut_visible = TRUE; + taper_visible = TRUE; + radius_offset_visible = TRUE; + revolutions_visible = TRUE; + twist_min = OBJECT_TWIST_MIN; + twist_max = OBJECT_TWIST_MAX; + twist_inc = OBJECT_TWIST_INC; + + break; + + case MI_SCULPT: + cut_visible = FALSE; + hollow_visible = FALSE; + twist_visible = FALSE; + top_size_x_visible = FALSE; + top_size_y_visible = FALSE; + top_shear_x_visible = FALSE; + top_shear_y_visible = FALSE; + skew_visible = FALSE; + advanced_cut_visible = FALSE; + taper_visible = FALSE; + radius_offset_visible = FALSE; + revolutions_visible = FALSE; + sculpt_texture_visible = TRUE; + + break; + + case MI_BOX: + advanced_cut_visible = TRUE; + advanced_is_slice = TRUE; + break; + + case MI_CYLINDER: + advanced_cut_visible = TRUE; + advanced_is_slice = TRUE; + break; + + case MI_PRISM: + advanced_cut_visible = TRUE; + advanced_is_slice = TRUE; + break; + + default: + break; + } + + // Check if we need to change top size/hole size params. + switch (selected_item) + { + case MI_SPHERE: + case MI_TORUS: + case MI_TUBE: + case MI_RING: + mSpinScaleX->set( scale_x ); + mSpinScaleY->set( scale_y ); + calcp->setVar(LLCalc::X_HOLE, scale_x); + calcp->setVar(LLCalc::Y_HOLE, scale_y); + mSpinScaleX->setMinValue(OBJECT_MIN_HOLE_SIZE); + mSpinScaleX->setMaxValue(OBJECT_MAX_HOLE_SIZE_X); + mSpinScaleY->setMinValue(OBJECT_MIN_HOLE_SIZE); + mSpinScaleY->setMaxValue(OBJECT_MAX_HOLE_SIZE_Y); + break; + default: + if (editable && single_volume) + { + mSpinScaleX->set( 1.f - scale_x ); + mSpinScaleY->set( 1.f - scale_y ); + mSpinScaleX->setMinValue(-1.f); + mSpinScaleX->setMaxValue(1.f); + mSpinScaleY->setMinValue(-1.f); + mSpinScaleY->setMaxValue(1.f); + + // Torus' Hole Size is Box/Cyl/Prism's Taper + calcp->setVar(LLCalc::X_TAPER, 1.f - scale_x); + calcp->setVar(LLCalc::Y_TAPER, 1.f - scale_y); + + // Box/Cyl/Prism have no hole size + calcp->setVar(LLCalc::X_HOLE, 0.f); + calcp->setVar(LLCalc::Y_HOLE, 0.f); + } + break; + } + + // Check if we need to limit the hollow based on the hole type. + if ( selected_hole == MI_HOLE_SQUARE && + ( selected_item == MI_CYLINDER || selected_item == MI_TORUS || + selected_item == MI_PRISM || selected_item == MI_RING || + selected_item == MI_SPHERE ) ) + { + mSpinHollow->setMinValue(0.f); + mSpinHollow->setMaxValue(70.f); + } + else + { + mSpinHollow->setMinValue(0.f); + mSpinHollow->setMaxValue(95.f); + } + + // Update field enablement + mComboBaseType ->setEnabled( enabled ); + mMenuClipboardParams->setEnabled(enabled); + + mLabelCut ->setEnabled( enabled ); + mSpinCutBegin ->setEnabled( enabled ); + mSpinCutEnd ->setEnabled( enabled ); + + mLabelHollow ->setEnabled( enabled ); + mSpinHollow ->setEnabled( enabled ); + mLabelHoleType ->setEnabled( hole_enabled ); + mComboHoleType ->setEnabled( hole_enabled ); + + mLabelTwist ->setEnabled( enabled ); + mSpinTwist ->setEnabled( enabled ); + mSpinTwistBegin ->setEnabled( enabled ); + + mLabelSkew ->setEnabled( enabled ); + mSpinSkew ->setEnabled( enabled ); + + getChildView("scale_hole")->setVisible( FALSE); + getChildView("scale_taper")->setVisible( FALSE); + if (top_size_x_visible || top_size_y_visible) + { + if (size_is_hole) + { + getChildView("scale_hole")->setVisible( TRUE); + getChildView("scale_hole")->setEnabled(enabled); + } + else + { + getChildView("scale_taper")->setVisible( TRUE); + getChildView("scale_taper")->setEnabled(enabled); + } + } + + mSpinScaleX ->setEnabled( enabled ); + mSpinScaleY ->setEnabled( enabled ); + + mLabelShear ->setEnabled( enabled ); + mSpinShearX ->setEnabled( enabled ); + mSpinShearY ->setEnabled( enabled ); + + getChildView("advanced_cut")->setVisible( FALSE); + getChildView("advanced_dimple")->setVisible( FALSE); + getChildView("advanced_slice")->setVisible( FALSE); + + if (advanced_cut_visible) + { + if (advanced_is_dimple) + { + getChildView("advanced_dimple")->setVisible( TRUE); + getChildView("advanced_dimple")->setEnabled(enabled); + } + + else if (advanced_is_slice) + { + getChildView("advanced_slice")->setVisible( TRUE); + getChildView("advanced_slice")->setEnabled(enabled); + } + else + { + getChildView("advanced_cut")->setVisible( TRUE); + getChildView("advanced_cut")->setEnabled(enabled); + } + } + + mCtrlPathBegin ->setEnabled( enabled ); + mCtrlPathEnd ->setEnabled( enabled ); + + mLabelTaper ->setEnabled( enabled ); + mSpinTaperX ->setEnabled( enabled ); + mSpinTaperY ->setEnabled( enabled ); + + mLabelRadiusOffset->setEnabled( enabled ); + mSpinRadiusOffset ->setEnabled( enabled ); + + mLabelRevolutions->setEnabled( enabled ); + mSpinRevolutions ->setEnabled( enabled ); + + // Update field visibility + mLabelCut ->setVisible( cut_visible ); + mSpinCutBegin ->setVisible( cut_visible ); + mSpinCutEnd ->setVisible( cut_visible ); + + mLabelHollow ->setVisible( hollow_visible ); + mSpinHollow ->setVisible( hollow_visible ); + mLabelHoleType ->setVisible( hollow_visible ); + mComboHoleType ->setVisible( hollow_visible ); + + mLabelTwist ->setVisible( twist_visible ); + mSpinTwist ->setVisible( twist_visible ); + mSpinTwistBegin ->setVisible( twist_visible ); + mSpinTwist ->setMinValue( twist_min ); + mSpinTwist ->setMaxValue( twist_max ); + mSpinTwist ->setIncrement( twist_inc ); + mSpinTwistBegin ->setMinValue( twist_min ); + mSpinTwistBegin ->setMaxValue( twist_max ); + mSpinTwistBegin ->setIncrement( twist_inc ); + + mSpinScaleX ->setVisible( top_size_x_visible ); + mSpinScaleY ->setVisible( top_size_y_visible ); + + mLabelSkew ->setVisible( skew_visible ); + mSpinSkew ->setVisible( skew_visible ); + + mLabelShear ->setVisible( top_shear_x_visible || top_shear_y_visible ); + mSpinShearX ->setVisible( top_shear_x_visible ); + mSpinShearY ->setVisible( top_shear_y_visible ); + + mCtrlPathBegin ->setVisible( advanced_cut_visible ); + mCtrlPathEnd ->setVisible( advanced_cut_visible ); + + mLabelTaper ->setVisible( taper_visible ); + mSpinTaperX ->setVisible( taper_visible ); + mSpinTaperY ->setVisible( taper_visible ); + + mLabelRadiusOffset->setVisible( radius_offset_visible ); + mSpinRadiusOffset ->setVisible( radius_offset_visible ); + + mLabelRevolutions->setVisible( revolutions_visible ); + mSpinRevolutions ->setVisible( revolutions_visible ); + + mCtrlSculptTexture->setVisible(sculpt_texture_visible); + mLabelSculptType->setVisible(sculpt_texture_visible); + mCtrlSculptType->setVisible(sculpt_texture_visible); + + + // sculpt texture + if (selected_item == MI_SCULPT) + { + + + LLUUID id; + LLSculptParams *sculpt_params = (LLSculptParams *)objectp->getParameterEntry(LLNetworkData::PARAMS_SCULPT); + + + if (sculpt_params) // if we have a legal sculpt param block for this object: + { + if (mObject != objectp) // we've just selected a new object, so save for undo + { + mSculptTextureRevert = sculpt_params->getSculptTexture(); + mSculptTypeRevert = sculpt_params->getSculptType(); + } + + U8 sculpt_type = sculpt_params->getSculptType(); + U8 sculpt_stitching = sculpt_type & LL_SCULPT_TYPE_MASK; + BOOL sculpt_invert = sculpt_type & LL_SCULPT_FLAG_INVERT; + BOOL sculpt_mirror = sculpt_type & LL_SCULPT_FLAG_MIRROR; + isMesh = (sculpt_stitching == LL_SCULPT_TYPE_MESH); + + LLTextureCtrl* mTextureCtrl = getChild("sculpt texture control"); + if(mTextureCtrl) + { + mTextureCtrl->setTentative(FALSE); + mTextureCtrl->setEnabled(editable && !isMesh); + if (editable) + mTextureCtrl->setImageAssetID(sculpt_params->getSculptTexture()); + else + mTextureCtrl->setImageAssetID(LLUUID::null); + } + + mComboBaseType->setEnabled(!isMesh); + mMenuClipboardParams->setEnabled(!isMesh); + + if (mCtrlSculptType) + { + if (sculpt_stitching == LL_SCULPT_TYPE_NONE) + { + // since 'None' is no longer an option in the combo box + // use 'Plane' as an equivalent sculpt type + mCtrlSculptType->setSelectedByValue(LLSD(LL_SCULPT_TYPE_PLANE), true); + } + else + { + mCtrlSculptType->setSelectedByValue(LLSD(sculpt_stitching), true); + } + mCtrlSculptType->setEnabled(editable && !isMesh); + } + + if (mCtrlSculptMirror) + { + mCtrlSculptMirror->set(sculpt_mirror); + mCtrlSculptMirror->setEnabled(editable && !isMesh); + } + + if (mCtrlSculptInvert) + { + mCtrlSculptInvert->set(sculpt_invert); + mCtrlSculptInvert->setEnabled(editable); + } + + if (mLabelSculptType) + { + mLabelSculptType->setEnabled(TRUE); + } + + } + } + else + { + mSculptTextureRevert = LLUUID::null; + } + + mCtrlSculptMirror->setVisible(sculpt_texture_visible && !isMesh); + mCtrlSculptInvert->setVisible(sculpt_texture_visible && !isMesh); + + //---------------------------------------------------------------------------- + + mObject = objectp; + mRootObject = root_objectp; } // static bool LLPanelObject::precommitValidate( const LLSD& data ) { - // TODO: Richard will fill this in later. - return TRUE; // FALSE means that validation failed and new value should not be commited. + // TODO: Richard will fill this in later. + return TRUE; // FALSE means that validation failed and new value should not be commited. } void LLPanelObject::sendIsPhysical() { - BOOL value = mCheckPhysics->get(); - if( mIsPhysical != value ) - { - LLSelectMgr::getInstance()->selectionUpdatePhysics(value); - mIsPhysical = value; - - LL_INFOS("FloaterTools") << "update physics sent" << LL_ENDL; - } - else - { - LL_INFOS("FloaterTools") << "update physics not changed" << LL_ENDL; - } + BOOL value = mCheckPhysics->get(); + if( mIsPhysical != value ) + { + LLSelectMgr::getInstance()->selectionUpdatePhysics(value); + mIsPhysical = value; + + LL_INFOS("FloaterTools") << "update physics sent" << LL_ENDL; + } + else + { + LL_INFOS("FloaterTools") << "update physics not changed" << LL_ENDL; + } } void LLPanelObject::sendIsTemporary() { - BOOL value = mCheckTemporary->get(); - if( mIsTemporary != value ) - { - LLSelectMgr::getInstance()->selectionUpdateTemporary(value); - mIsTemporary = value; - - LL_INFOS("FloaterTools") << "update temporary sent" << LL_ENDL; - } - else - { - LL_INFOS("FloaterTools") << "update temporary not changed" << LL_ENDL; - } + BOOL value = mCheckTemporary->get(); + if( mIsTemporary != value ) + { + LLSelectMgr::getInstance()->selectionUpdateTemporary(value); + mIsTemporary = value; + + LL_INFOS("FloaterTools") << "update temporary sent" << LL_ENDL; + } + else + { + LL_INFOS("FloaterTools") << "update temporary not changed" << LL_ENDL; + } } void LLPanelObject::sendIsPhantom() { - BOOL value = mCheckPhantom->get(); - if( mIsPhantom != value ) - { - LLSelectMgr::getInstance()->selectionUpdatePhantom(value); - mIsPhantom = value; - - LL_INFOS("FloaterTools") << "update phantom sent" << LL_ENDL; - } - else - { - LL_INFOS("FloaterTools") << "update phantom not changed" << LL_ENDL; - } + BOOL value = mCheckPhantom->get(); + if( mIsPhantom != value ) + { + LLSelectMgr::getInstance()->selectionUpdatePhantom(value); + mIsPhantom = value; + + LL_INFOS("FloaterTools") << "update phantom sent" << LL_ENDL; + } + else + { + LL_INFOS("FloaterTools") << "update phantom not changed" << LL_ENDL; + } } // static void LLPanelObject::onCommitParametric( LLUICtrl* ctrl, void* userdata ) { - LLPanelObject* self = (LLPanelObject*) userdata; - - if (self->mObject.isNull()) - { - return; - } - - if (self->mObject->getPCode() != LL_PCODE_VOLUME) - { - // Don't allow modification of non-volume objects. - return; - } - - LLVolume *volume = self->mObject->getVolume(); - if (!volume) - { - return; - } - - LLVolumeParams volume_params; - self->getVolumeParams(volume_params); - - - - // set sculpting - S32 selected_type = self->mComboBaseType->getCurrentIndex(); - - if (selected_type == MI_SCULPT) - { - self->mObject->setParameterEntryInUse(LLNetworkData::PARAMS_SCULPT, TRUE, TRUE); - LLSculptParams *sculpt_params = (LLSculptParams *)self->mObject->getParameterEntry(LLNetworkData::PARAMS_SCULPT); - if (sculpt_params) - volume_params.setSculptID(sculpt_params->getSculptTexture(), sculpt_params->getSculptType()); - } - else - { - LLSculptParams *sculpt_params = (LLSculptParams *)self->mObject->getParameterEntry(LLNetworkData::PARAMS_SCULPT); - if (sculpt_params) - self->mObject->setParameterEntryInUse(LLNetworkData::PARAMS_SCULPT, FALSE, TRUE); - } - - // Update the volume, if necessary. - self->mObject->updateVolume(volume_params); - - - // This was added to make sure thate when changes are made, the UI - // adjusts to present valid options. - // *FIX: only some changes, ie, hollow or primitive type changes, - // require a refresh. - self->refresh(); + LLPanelObject* self = (LLPanelObject*) userdata; + + if (self->mObject.isNull()) + { + return; + } + + if (self->mObject->getPCode() != LL_PCODE_VOLUME) + { + // Don't allow modification of non-volume objects. + return; + } + + LLVolume *volume = self->mObject->getVolume(); + if (!volume) + { + return; + } + + LLVolumeParams volume_params; + self->getVolumeParams(volume_params); + + + + // set sculpting + S32 selected_type = self->mComboBaseType->getCurrentIndex(); + + if (selected_type == MI_SCULPT) + { + self->mObject->setParameterEntryInUse(LLNetworkData::PARAMS_SCULPT, TRUE, TRUE); + LLSculptParams *sculpt_params = (LLSculptParams *)self->mObject->getParameterEntry(LLNetworkData::PARAMS_SCULPT); + if (sculpt_params) + volume_params.setSculptID(sculpt_params->getSculptTexture(), sculpt_params->getSculptType()); + } + else + { + LLSculptParams *sculpt_params = (LLSculptParams *)self->mObject->getParameterEntry(LLNetworkData::PARAMS_SCULPT); + if (sculpt_params) + self->mObject->setParameterEntryInUse(LLNetworkData::PARAMS_SCULPT, FALSE, TRUE); + } + + // Update the volume, if necessary. + self->mObject->updateVolume(volume_params); + + + // This was added to make sure thate when changes are made, the UI + // adjusts to present valid options. + // *FIX: only some changes, ie, hollow or primitive type changes, + // require a refresh. + self->refresh(); } void LLPanelObject::getVolumeParams(LLVolumeParams& volume_params) { - // Figure out what type of volume to make - S32 was_selected_type = mSelectedType; - S32 selected_type = mComboBaseType->getCurrentIndex(); - U8 profile; - U8 path; - switch ( selected_type ) - { - case MI_CYLINDER: - profile = LL_PCODE_PROFILE_CIRCLE; - path = LL_PCODE_PATH_LINE; - break; - - case MI_BOX: - profile = LL_PCODE_PROFILE_SQUARE; - path = LL_PCODE_PATH_LINE; - break; - - case MI_PRISM: - profile = LL_PCODE_PROFILE_EQUALTRI; - path = LL_PCODE_PATH_LINE; - break; - - case MI_SPHERE: - profile = LL_PCODE_PROFILE_CIRCLE_HALF; - path = LL_PCODE_PATH_CIRCLE; - break; - - case MI_TORUS: - profile = LL_PCODE_PROFILE_CIRCLE; - path = LL_PCODE_PATH_CIRCLE; - break; - - case MI_TUBE: - profile = LL_PCODE_PROFILE_SQUARE; - path = LL_PCODE_PATH_CIRCLE; - break; - - case MI_RING: - profile = LL_PCODE_PROFILE_EQUALTRI; - path = LL_PCODE_PATH_CIRCLE; - break; - - case MI_SCULPT: - profile = LL_PCODE_PROFILE_CIRCLE; - path = LL_PCODE_PATH_CIRCLE; - break; - - default: - LL_WARNS("FloaterTools") << "Unknown base type " << selected_type - << " in getVolumeParams()" << LL_ENDL; - // assume a box - selected_type = MI_BOX; - profile = LL_PCODE_PROFILE_SQUARE; - path = LL_PCODE_PATH_LINE; - break; - } - - - if (path == LL_PCODE_PATH_LINE) - { - LLVOVolume *volobjp = (LLVOVolume *)(LLViewerObject*)(mObject); - if (volobjp->isFlexible()) - { - path = LL_PCODE_PATH_FLEXIBLE; - } - } - - S32 selected_hole = mComboHoleType->getCurrentIndex(); - U8 hole; - switch (selected_hole) - { - case MI_HOLE_CIRCLE: - hole = LL_PCODE_HOLE_CIRCLE; - break; - case MI_HOLE_SQUARE: - hole = LL_PCODE_HOLE_SQUARE; - break; - case MI_HOLE_TRIANGLE: - hole = LL_PCODE_HOLE_TRIANGLE; - break; - case MI_HOLE_SAME: - default: - hole = LL_PCODE_HOLE_SAME; - break; - } - - volume_params.setType(profile | hole, path); - mSelectedType = selected_type; - - // Compute cut start/end - F32 cut_begin = mSpinCutBegin->get(); - F32 cut_end = mSpinCutEnd->get(); - - // Make sure at least OBJECT_CUT_INC of the object survives - if (cut_begin > cut_end - OBJECT_MIN_CUT_INC) - { - cut_begin = cut_end - OBJECT_MIN_CUT_INC; - mSpinCutBegin->set(cut_begin); - } - - F32 adv_cut_begin = mCtrlPathBegin->get(); - F32 adv_cut_end = mCtrlPathEnd->get(); - - // Make sure at least OBJECT_CUT_INC of the object survives - if (adv_cut_begin > adv_cut_end - OBJECT_MIN_CUT_INC) - { - adv_cut_begin = adv_cut_end - OBJECT_MIN_CUT_INC; - mCtrlPathBegin->set(adv_cut_begin); - } - - F32 begin_s, end_s; - F32 begin_t, end_t; - - if (selected_type == MI_SPHERE || selected_type == MI_TORUS || - selected_type == MI_TUBE || selected_type == MI_RING) - { - begin_s = adv_cut_begin; - end_s = adv_cut_end; - - begin_t = cut_begin; - end_t = cut_end; - } - else - { - begin_s = cut_begin; - end_s = cut_end; - - begin_t = adv_cut_begin; - end_t = adv_cut_end; - } - - volume_params.setBeginAndEndS(begin_s, end_s); - volume_params.setBeginAndEndT(begin_t, end_t); - - // Hollowness - F32 hollow = mSpinHollow->get() / 100.f; - - if ( selected_hole == MI_HOLE_SQUARE && - ( selected_type == MI_CYLINDER || selected_type == MI_TORUS || - selected_type == MI_PRISM || selected_type == MI_RING || - selected_type == MI_SPHERE ) ) - { - if (hollow > 0.7f) hollow = 0.7f; - } - - volume_params.setHollow( hollow ); - - // Twist Begin,End - F32 twist_begin = mSpinTwistBegin->get(); - F32 twist = mSpinTwist->get(); - // Check the path type for twist conversion. - if (path == LL_PCODE_PATH_LINE || path == LL_PCODE_PATH_FLEXIBLE) - { - twist_begin /= OBJECT_TWIST_LINEAR_MAX; - twist /= OBJECT_TWIST_LINEAR_MAX; - } - else - { - twist_begin /= OBJECT_TWIST_MAX; - twist /= OBJECT_TWIST_MAX; - } - - volume_params.setTwistBegin(twist_begin); - volume_params.setTwist(twist); - - // Scale X,Y - F32 scale_x = mSpinScaleX->get(); - F32 scale_y = mSpinScaleY->get(); - if ( was_selected_type == MI_BOX || was_selected_type == MI_CYLINDER || was_selected_type == MI_PRISM) - { - scale_x = 1.f - scale_x; - scale_y = 1.f - scale_y; - } - - // Skew - F32 skew = mSpinSkew->get(); - - // Taper X,Y - F32 taper_x = mSpinTaperX->get(); - F32 taper_y = mSpinTaperY->get(); - - // Radius offset - F32 radius_offset = mSpinRadiusOffset->get(); - - // Revolutions - F32 revolutions = mSpinRevolutions->get(); - - if ( selected_type == MI_SPHERE ) - { - // Snap values to valid sphere parameters. - scale_x = 1.0f; - scale_y = 1.0f; - skew = 0.0f; - taper_x = 0.0f; - taper_y = 0.0f; - radius_offset = 0.0f; - revolutions = 1.0f; - } - else if ( selected_type == MI_TORUS || selected_type == MI_TUBE || - selected_type == MI_RING ) - { - scale_x = llclamp( - scale_x, - OBJECT_MIN_HOLE_SIZE, - OBJECT_MAX_HOLE_SIZE_X); - scale_y = llclamp( - scale_y, - OBJECT_MIN_HOLE_SIZE, - OBJECT_MAX_HOLE_SIZE_Y); - - // Limit radius offset, based on taper and hole size y. - F32 radius_mag = fabs(radius_offset); - F32 hole_y_mag = fabs(scale_y); - F32 taper_y_mag = fabs(taper_y); - // Check to see if the taper effects us. - if ( (radius_offset > 0.f && taper_y < 0.f) || - (radius_offset < 0.f && taper_y > 0.f) ) - { - // The taper does not help increase the radius offset range. - taper_y_mag = 0.f; - } - F32 max_radius_mag = 1.f - hole_y_mag * (1.f - taper_y_mag) / (1.f - hole_y_mag); - // Enforce the maximum magnitude. - if (radius_mag > max_radius_mag) - { - // Check radius offset sign. - if (radius_offset < 0.f) - { - radius_offset = -max_radius_mag; - } - else - { - radius_offset = max_radius_mag; - } - } - - // Check the skew value against the revolutions. - F32 skew_mag= fabs(skew); - F32 min_skew_mag = 1.0f - 1.0f / (revolutions * scale_x + 1.0f); - // Discontinuity; A revolution of 1 allows skews below 0.5. - if ( fabs(revolutions - 1.0f) < 0.001) - min_skew_mag = 0.0f; - - // Clip skew. - if (skew_mag < min_skew_mag) - { - // Check skew sign. - if (skew < 0.0f) - { - skew = -min_skew_mag; - } - else - { - skew = min_skew_mag; - } - } - } - - volume_params.setRatio( scale_x, scale_y ); - volume_params.setSkew(skew); - volume_params.setTaper( taper_x, taper_y ); - volume_params.setRadiusOffset(radius_offset); - volume_params.setRevolutions(revolutions); - - // Shear X,Y - F32 shear_x = mSpinShearX->get(); - F32 shear_y = mSpinShearY->get(); - volume_params.setShear( shear_x, shear_y ); - - if (selected_type == MI_SCULPT) - { - volume_params.setSculptID(LLUUID::null, 0); - volume_params.setBeginAndEndT (0, 1); - volume_params.setBeginAndEndS (0, 1); - volume_params.setHollow (0); - volume_params.setTwistBegin (0); - volume_params.setTwistEnd (0); - volume_params.setRatio (1, 0.5); - volume_params.setShear (0, 0); - volume_params.setTaper (0, 0); - volume_params.setRevolutions (1); - volume_params.setRadiusOffset (0); - volume_params.setSkew (0); - } + // Figure out what type of volume to make + S32 was_selected_type = mSelectedType; + S32 selected_type = mComboBaseType->getCurrentIndex(); + U8 profile; + U8 path; + switch ( selected_type ) + { + case MI_CYLINDER: + profile = LL_PCODE_PROFILE_CIRCLE; + path = LL_PCODE_PATH_LINE; + break; + + case MI_BOX: + profile = LL_PCODE_PROFILE_SQUARE; + path = LL_PCODE_PATH_LINE; + break; + + case MI_PRISM: + profile = LL_PCODE_PROFILE_EQUALTRI; + path = LL_PCODE_PATH_LINE; + break; + + case MI_SPHERE: + profile = LL_PCODE_PROFILE_CIRCLE_HALF; + path = LL_PCODE_PATH_CIRCLE; + break; + + case MI_TORUS: + profile = LL_PCODE_PROFILE_CIRCLE; + path = LL_PCODE_PATH_CIRCLE; + break; + + case MI_TUBE: + profile = LL_PCODE_PROFILE_SQUARE; + path = LL_PCODE_PATH_CIRCLE; + break; + + case MI_RING: + profile = LL_PCODE_PROFILE_EQUALTRI; + path = LL_PCODE_PATH_CIRCLE; + break; + + case MI_SCULPT: + profile = LL_PCODE_PROFILE_CIRCLE; + path = LL_PCODE_PATH_CIRCLE; + break; + + default: + LL_WARNS("FloaterTools") << "Unknown base type " << selected_type + << " in getVolumeParams()" << LL_ENDL; + // assume a box + selected_type = MI_BOX; + profile = LL_PCODE_PROFILE_SQUARE; + path = LL_PCODE_PATH_LINE; + break; + } + + + if (path == LL_PCODE_PATH_LINE) + { + LLVOVolume *volobjp = (LLVOVolume *)(LLViewerObject*)(mObject); + if (volobjp->isFlexible()) + { + path = LL_PCODE_PATH_FLEXIBLE; + } + } + + S32 selected_hole = mComboHoleType->getCurrentIndex(); + U8 hole; + switch (selected_hole) + { + case MI_HOLE_CIRCLE: + hole = LL_PCODE_HOLE_CIRCLE; + break; + case MI_HOLE_SQUARE: + hole = LL_PCODE_HOLE_SQUARE; + break; + case MI_HOLE_TRIANGLE: + hole = LL_PCODE_HOLE_TRIANGLE; + break; + case MI_HOLE_SAME: + default: + hole = LL_PCODE_HOLE_SAME; + break; + } + + volume_params.setType(profile | hole, path); + mSelectedType = selected_type; + + // Compute cut start/end + F32 cut_begin = mSpinCutBegin->get(); + F32 cut_end = mSpinCutEnd->get(); + + // Make sure at least OBJECT_CUT_INC of the object survives + if (cut_begin > cut_end - OBJECT_MIN_CUT_INC) + { + cut_begin = cut_end - OBJECT_MIN_CUT_INC; + mSpinCutBegin->set(cut_begin); + } + + F32 adv_cut_begin = mCtrlPathBegin->get(); + F32 adv_cut_end = mCtrlPathEnd->get(); + + // Make sure at least OBJECT_CUT_INC of the object survives + if (adv_cut_begin > adv_cut_end - OBJECT_MIN_CUT_INC) + { + adv_cut_begin = adv_cut_end - OBJECT_MIN_CUT_INC; + mCtrlPathBegin->set(adv_cut_begin); + } + + F32 begin_s, end_s; + F32 begin_t, end_t; + + if (selected_type == MI_SPHERE || selected_type == MI_TORUS || + selected_type == MI_TUBE || selected_type == MI_RING) + { + begin_s = adv_cut_begin; + end_s = adv_cut_end; + + begin_t = cut_begin; + end_t = cut_end; + } + else + { + begin_s = cut_begin; + end_s = cut_end; + + begin_t = adv_cut_begin; + end_t = adv_cut_end; + } + + volume_params.setBeginAndEndS(begin_s, end_s); + volume_params.setBeginAndEndT(begin_t, end_t); + + // Hollowness + F32 hollow = mSpinHollow->get() / 100.f; + + if ( selected_hole == MI_HOLE_SQUARE && + ( selected_type == MI_CYLINDER || selected_type == MI_TORUS || + selected_type == MI_PRISM || selected_type == MI_RING || + selected_type == MI_SPHERE ) ) + { + if (hollow > 0.7f) hollow = 0.7f; + } + + volume_params.setHollow( hollow ); + + // Twist Begin,End + F32 twist_begin = mSpinTwistBegin->get(); + F32 twist = mSpinTwist->get(); + // Check the path type for twist conversion. + if (path == LL_PCODE_PATH_LINE || path == LL_PCODE_PATH_FLEXIBLE) + { + twist_begin /= OBJECT_TWIST_LINEAR_MAX; + twist /= OBJECT_TWIST_LINEAR_MAX; + } + else + { + twist_begin /= OBJECT_TWIST_MAX; + twist /= OBJECT_TWIST_MAX; + } + + volume_params.setTwistBegin(twist_begin); + volume_params.setTwist(twist); + + // Scale X,Y + F32 scale_x = mSpinScaleX->get(); + F32 scale_y = mSpinScaleY->get(); + if ( was_selected_type == MI_BOX || was_selected_type == MI_CYLINDER || was_selected_type == MI_PRISM) + { + scale_x = 1.f - scale_x; + scale_y = 1.f - scale_y; + } + + // Skew + F32 skew = mSpinSkew->get(); + + // Taper X,Y + F32 taper_x = mSpinTaperX->get(); + F32 taper_y = mSpinTaperY->get(); + + // Radius offset + F32 radius_offset = mSpinRadiusOffset->get(); + + // Revolutions + F32 revolutions = mSpinRevolutions->get(); + + if ( selected_type == MI_SPHERE ) + { + // Snap values to valid sphere parameters. + scale_x = 1.0f; + scale_y = 1.0f; + skew = 0.0f; + taper_x = 0.0f; + taper_y = 0.0f; + radius_offset = 0.0f; + revolutions = 1.0f; + } + else if ( selected_type == MI_TORUS || selected_type == MI_TUBE || + selected_type == MI_RING ) + { + scale_x = llclamp( + scale_x, + OBJECT_MIN_HOLE_SIZE, + OBJECT_MAX_HOLE_SIZE_X); + scale_y = llclamp( + scale_y, + OBJECT_MIN_HOLE_SIZE, + OBJECT_MAX_HOLE_SIZE_Y); + + // Limit radius offset, based on taper and hole size y. + F32 radius_mag = fabs(radius_offset); + F32 hole_y_mag = fabs(scale_y); + F32 taper_y_mag = fabs(taper_y); + // Check to see if the taper effects us. + if ( (radius_offset > 0.f && taper_y < 0.f) || + (radius_offset < 0.f && taper_y > 0.f) ) + { + // The taper does not help increase the radius offset range. + taper_y_mag = 0.f; + } + F32 max_radius_mag = 1.f - hole_y_mag * (1.f - taper_y_mag) / (1.f - hole_y_mag); + // Enforce the maximum magnitude. + if (radius_mag > max_radius_mag) + { + // Check radius offset sign. + if (radius_offset < 0.f) + { + radius_offset = -max_radius_mag; + } + else + { + radius_offset = max_radius_mag; + } + } + + // Check the skew value against the revolutions. + F32 skew_mag= fabs(skew); + F32 min_skew_mag = 1.0f - 1.0f / (revolutions * scale_x + 1.0f); + // Discontinuity; A revolution of 1 allows skews below 0.5. + if ( fabs(revolutions - 1.0f) < 0.001) + min_skew_mag = 0.0f; + + // Clip skew. + if (skew_mag < min_skew_mag) + { + // Check skew sign. + if (skew < 0.0f) + { + skew = -min_skew_mag; + } + else + { + skew = min_skew_mag; + } + } + } + + volume_params.setRatio( scale_x, scale_y ); + volume_params.setSkew(skew); + volume_params.setTaper( taper_x, taper_y ); + volume_params.setRadiusOffset(radius_offset); + volume_params.setRevolutions(revolutions); + + // Shear X,Y + F32 shear_x = mSpinShearX->get(); + F32 shear_y = mSpinShearY->get(); + volume_params.setShear( shear_x, shear_y ); + + if (selected_type == MI_SCULPT) + { + volume_params.setSculptID(LLUUID::null, 0); + volume_params.setBeginAndEndT (0, 1); + volume_params.setBeginAndEndS (0, 1); + volume_params.setHollow (0); + volume_params.setTwistBegin (0); + volume_params.setTwistEnd (0); + volume_params.setRatio (1, 0.5); + volume_params.setShear (0, 0); + volume_params.setTaper (0, 0); + volume_params.setRevolutions (1); + volume_params.setRadiusOffset (0); + volume_params.setSkew (0); + } } // BUG: Make work with multiple objects void LLPanelObject::sendRotation(BOOL btn_down) { - if (mObject.isNull()) return; - - LLVector3 new_rot(mCtrlRotX->get(), mCtrlRotY->get(), mCtrlRotZ->get()); - new_rot.mV[VX] = ll_round(new_rot.mV[VX], OBJECT_ROTATION_PRECISION); - new_rot.mV[VY] = ll_round(new_rot.mV[VY], OBJECT_ROTATION_PRECISION); - new_rot.mV[VZ] = ll_round(new_rot.mV[VZ], OBJECT_ROTATION_PRECISION); - - // Note: must compare before conversion to radians - LLVector3 delta = new_rot - mCurEulerDegrees; - - if (delta.magVec() >= 0.0005f) - { - mCurEulerDegrees = new_rot; - new_rot *= DEG_TO_RAD; - - LLQuaternion rotation; - rotation.setQuat(new_rot.mV[VX], new_rot.mV[VY], new_rot.mV[VZ]); - - if (mRootObject != mObject) - { - rotation = rotation * ~mRootObject->getRotationRegion(); - } - - // To include avatars into movements and rotation - // If false, all children are selected anyway - move avatar - // If true, not all children are selected - save positions - bool individual_selection = gSavedSettings.getBOOL("EditLinkedParts"); - std::vector& child_positions = mObject->mUnselectedChildrenPositions ; - std::vector child_rotations; - if (mObject->isRootEdit() && individual_selection) - { - mObject->saveUnselectedChildrenRotation(child_rotations) ; - mObject->saveUnselectedChildrenPosition(child_positions) ; - } - - mObject->setRotation(rotation); - LLManip::rebuild(mObject) ; - - // for individually selected roots, we need to counterrotate all the children - if (mObject->isRootEdit() && individual_selection) - { - mObject->resetChildrenRotationAndPosition(child_rotations, child_positions) ; - } - - if(!btn_down) - { - child_positions.clear() ; - LLSelectMgr::getInstance()->sendMultipleUpdate(UPD_ROTATION | UPD_POSITION); - } - } + if (mObject.isNull()) return; + + LLVector3 new_rot(mCtrlRotX->get(), mCtrlRotY->get(), mCtrlRotZ->get()); + new_rot.mV[VX] = ll_round(new_rot.mV[VX], OBJECT_ROTATION_PRECISION); + new_rot.mV[VY] = ll_round(new_rot.mV[VY], OBJECT_ROTATION_PRECISION); + new_rot.mV[VZ] = ll_round(new_rot.mV[VZ], OBJECT_ROTATION_PRECISION); + + // Note: must compare before conversion to radians + LLVector3 delta = new_rot - mCurEulerDegrees; + + if (delta.magVec() >= 0.0005f) + { + mCurEulerDegrees = new_rot; + new_rot *= DEG_TO_RAD; + + LLQuaternion rotation; + rotation.setQuat(new_rot.mV[VX], new_rot.mV[VY], new_rot.mV[VZ]); + + if (mRootObject != mObject) + { + rotation = rotation * ~mRootObject->getRotationRegion(); + } + + // To include avatars into movements and rotation + // If false, all children are selected anyway - move avatar + // If true, not all children are selected - save positions + bool individual_selection = gSavedSettings.getBOOL("EditLinkedParts"); + std::vector& child_positions = mObject->mUnselectedChildrenPositions ; + std::vector child_rotations; + if (mObject->isRootEdit() && individual_selection) + { + mObject->saveUnselectedChildrenRotation(child_rotations) ; + mObject->saveUnselectedChildrenPosition(child_positions) ; + } + + mObject->setRotation(rotation); + LLManip::rebuild(mObject) ; + + // for individually selected roots, we need to counterrotate all the children + if (mObject->isRootEdit() && individual_selection) + { + mObject->resetChildrenRotationAndPosition(child_rotations, child_positions) ; + } + + if(!btn_down) + { + child_positions.clear() ; + LLSelectMgr::getInstance()->sendMultipleUpdate(UPD_ROTATION | UPD_POSITION); + } + } } // BUG: Make work with multiple objects void LLPanelObject::sendScale(BOOL btn_down) { - if (mObject.isNull()) return; - - LLVector3 newscale(mCtrlScaleX->get(), mCtrlScaleY->get(), mCtrlScaleZ->get()); - - LLVector3 delta = newscale - mObject->getScale(); - if (delta.magVec() >= 0.0005f || (mSizeChanged && !btn_down)) - { - // scale changed by more than 1/2 millimeter - mSizeChanged = btn_down; - - // check to see if we aren't scaling the textures - // (in which case the tex coord's need to be recomputed) - BOOL dont_stretch_textures = !LLManipScale::getStretchTextures(); - if (dont_stretch_textures) - { - LLSelectMgr::getInstance()->saveSelectedObjectTransform(SELECT_ACTION_TYPE_SCALE); - } - - mObject->setScale(newscale, TRUE); - - if(!btn_down) - { - LLSelectMgr::getInstance()->sendMultipleUpdate(UPD_SCALE | UPD_POSITION); - } - - LLSelectMgr::getInstance()->adjustTexturesByScale(TRUE, !dont_stretch_textures); -// LL_INFOS() << "scale sent" << LL_ENDL; - } - else - { -// LL_INFOS() << "scale not changed" << LL_ENDL; - } + if (mObject.isNull()) return; + + LLVector3 newscale(mCtrlScaleX->get(), mCtrlScaleY->get(), mCtrlScaleZ->get()); + + LLVector3 delta = newscale - mObject->getScale(); + if (delta.magVec() >= 0.0005f || (mSizeChanged && !btn_down)) + { + // scale changed by more than 1/2 millimeter + mSizeChanged = btn_down; + + // check to see if we aren't scaling the textures + // (in which case the tex coord's need to be recomputed) + BOOL dont_stretch_textures = !LLManipScale::getStretchTextures(); + if (dont_stretch_textures) + { + LLSelectMgr::getInstance()->saveSelectedObjectTransform(SELECT_ACTION_TYPE_SCALE); + } + + mObject->setScale(newscale, TRUE); + + if(!btn_down) + { + LLSelectMgr::getInstance()->sendMultipleUpdate(UPD_SCALE | UPD_POSITION); + } + + LLSelectMgr::getInstance()->adjustTexturesByScale(TRUE, !dont_stretch_textures); +// LL_INFOS() << "scale sent" << LL_ENDL; + } + else + { +// LL_INFOS() << "scale not changed" << LL_ENDL; + } } void LLPanelObject::sendPosition(BOOL btn_down) -{ - if (mObject.isNull()) return; +{ + if (mObject.isNull()) return; - LLVector3 newpos(mCtrlPosX->get(), mCtrlPosY->get(), mCtrlPosZ->get()); - LLViewerRegion* regionp = mObject->getRegion(); + LLVector3 newpos(mCtrlPosX->get(), mCtrlPosY->get(), mCtrlPosZ->get()); + LLViewerRegion* regionp = mObject->getRegion(); - if (!regionp) return; + if (!regionp) return; - if (!mObject->isAttachment()) - { + if (!mObject->isAttachment()) + { // Clamp the Z height const F32 height = newpos.mV[VZ]; const F32 min_height = LLWorld::getInstance()->getMinAllowedZ(mObject, mObject->getPositionGlobal()); const F32 max_height = LLWorld::getInstance()->getRegionMaxHeight(); - if ( height < min_height) - { - newpos.mV[VZ] = min_height; - mCtrlPosZ->set( min_height ); - } - else if ( height > max_height ) - { - newpos.mV[VZ] = max_height; - mCtrlPosZ->set( max_height ); - } - - // Grass is always drawn on the ground, so clamp its position to the ground - if (mObject->getPCode() == LL_PCODE_LEGACY_GRASS) - { - mCtrlPosZ->set(LLWorld::getInstance()->resolveLandHeightAgent(newpos) + 1.f); - } - } + if ( height < min_height) + { + newpos.mV[VZ] = min_height; + mCtrlPosZ->set( min_height ); + } + else if ( height > max_height ) + { + newpos.mV[VZ] = max_height; + mCtrlPosZ->set( max_height ); + } + + // Grass is always drawn on the ground, so clamp its position to the ground + if (mObject->getPCode() == LL_PCODE_LEGACY_GRASS) + { + mCtrlPosZ->set(LLWorld::getInstance()->resolveLandHeightAgent(newpos) + 1.f); + } + } else { if (newpos.length() > MAX_ATTACHMENT_DIST) @@ -1696,9 +1696,9 @@ void LLPanelObject::sendPosition(BOOL btn_down) } } - // Make sure new position is in a valid region, so the object - // won't get dumped by the simulator. - LLVector3d new_pos_global = regionp->getPosGlobalFromRegion(newpos); + // Make sure new position is in a valid region, so the object + // won't get dumped by the simulator. + LLVector3d new_pos_global = regionp->getPosGlobalFromRegion(newpos); bool is_valid_pos = true; if (mObject->isAttachment()) { @@ -1711,213 +1711,213 @@ void LLPanelObject::sendPosition(BOOL btn_down) is_valid_pos = LLWorld::getInstance()->positionRegionValidGlobal(new_pos_global); } - if (is_valid_pos) - { - // send only if the position is changed, that is, the delta vector is not zero - LLVector3d old_pos_global = mObject->getPositionGlobal(); - LLVector3d delta = new_pos_global - old_pos_global; - // moved more than 1/2 millimeter - if (delta.magVec() >= 0.0005f) - { - if (mRootObject != mObject) - { - newpos = newpos - mRootObject->getPositionRegion(); - newpos = newpos * ~mRootObject->getRotationRegion(); - mObject->setPositionParent(newpos); - } - else - { - mObject->setPositionEdit(newpos); - } - - LLManip::rebuild(mObject) ; - - // for individually selected roots, we need to counter-translate all unselected children - if (mObject->isRootEdit()) - { - // only offset by parent's translation - mObject->resetChildrenPosition(LLVector3(-delta), TRUE, TRUE) ; - } - - if(!btn_down) - { - LLSelectMgr::getInstance()->sendMultipleUpdate(UPD_POSITION); - } - - LLSelectMgr::getInstance()->updateSelectionCenter(); - } - } - else - { - // move failed, so we update the UI with the correct values - LLVector3 vec = mRootObject->getPositionRegion(); - mCtrlPosX->set(vec.mV[VX]); - mCtrlPosY->set(vec.mV[VY]); - mCtrlPosZ->set(vec.mV[VZ]); - } + if (is_valid_pos) + { + // send only if the position is changed, that is, the delta vector is not zero + LLVector3d old_pos_global = mObject->getPositionGlobal(); + LLVector3d delta = new_pos_global - old_pos_global; + // moved more than 1/2 millimeter + if (delta.magVec() >= 0.0005f) + { + if (mRootObject != mObject) + { + newpos = newpos - mRootObject->getPositionRegion(); + newpos = newpos * ~mRootObject->getRotationRegion(); + mObject->setPositionParent(newpos); + } + else + { + mObject->setPositionEdit(newpos); + } + + LLManip::rebuild(mObject) ; + + // for individually selected roots, we need to counter-translate all unselected children + if (mObject->isRootEdit()) + { + // only offset by parent's translation + mObject->resetChildrenPosition(LLVector3(-delta), TRUE, TRUE) ; + } + + if(!btn_down) + { + LLSelectMgr::getInstance()->sendMultipleUpdate(UPD_POSITION); + } + + LLSelectMgr::getInstance()->updateSelectionCenter(); + } + } + else + { + // move failed, so we update the UI with the correct values + LLVector3 vec = mRootObject->getPositionRegion(); + mCtrlPosX->set(vec.mV[VX]); + mCtrlPosY->set(vec.mV[VY]); + mCtrlPosZ->set(vec.mV[VZ]); + } } void LLPanelObject::sendSculpt() { - if (mObject.isNull()) - return; - - LLSculptParams sculpt_params; - LLUUID sculpt_id = LLUUID::null; - - if (mCtrlSculptTexture) - sculpt_id = mCtrlSculptTexture->getImageAssetID(); - - U8 sculpt_type = 0; - - if (mCtrlSculptType) - sculpt_type |= mCtrlSculptType->getValue().asInteger(); - - bool enabled = sculpt_type != LL_SCULPT_TYPE_MESH; - - if (mCtrlSculptMirror) - { - mCtrlSculptMirror->setEnabled(enabled ? TRUE : FALSE); - } - if (mCtrlSculptInvert) - { - mCtrlSculptInvert->setEnabled(enabled ? TRUE : FALSE); - } - - if ((mCtrlSculptMirror) && (mCtrlSculptMirror->get())) - sculpt_type |= LL_SCULPT_FLAG_MIRROR; - - if ((mCtrlSculptInvert) && (mCtrlSculptInvert->get())) - sculpt_type |= LL_SCULPT_FLAG_INVERT; - - sculpt_params.setSculptTexture(sculpt_id, sculpt_type); - mObject->setParameterEntry(LLNetworkData::PARAMS_SCULPT, sculpt_params, TRUE); + if (mObject.isNull()) + return; + + LLSculptParams sculpt_params; + LLUUID sculpt_id = LLUUID::null; + + if (mCtrlSculptTexture) + sculpt_id = mCtrlSculptTexture->getImageAssetID(); + + U8 sculpt_type = 0; + + if (mCtrlSculptType) + sculpt_type |= mCtrlSculptType->getValue().asInteger(); + + bool enabled = sculpt_type != LL_SCULPT_TYPE_MESH; + + if (mCtrlSculptMirror) + { + mCtrlSculptMirror->setEnabled(enabled ? TRUE : FALSE); + } + if (mCtrlSculptInvert) + { + mCtrlSculptInvert->setEnabled(enabled ? TRUE : FALSE); + } + + if ((mCtrlSculptMirror) && (mCtrlSculptMirror->get())) + sculpt_type |= LL_SCULPT_FLAG_MIRROR; + + if ((mCtrlSculptInvert) && (mCtrlSculptInvert->get())) + sculpt_type |= LL_SCULPT_FLAG_INVERT; + + sculpt_params.setSculptTexture(sculpt_id, sculpt_type); + mObject->setParameterEntry(LLNetworkData::PARAMS_SCULPT, sculpt_params, TRUE); } void LLPanelObject::refresh() { - getState(); - if (mObject.notNull() && mObject->isDead()) - { - mObject = NULL; - } - - if (mRootObject.notNull() && mRootObject->isDead()) - { - mRootObject = NULL; - } - - F32 max_scale = get_default_max_prim_scale(LLPickInfo::isFlora(mObject)); - - getChild("Scale X")->setMaxValue(max_scale); - getChild("Scale Y")->setMaxValue(max_scale); - getChild("Scale Z")->setMaxValue(max_scale); + getState(); + if (mObject.notNull() && mObject->isDead()) + { + mObject = NULL; + } + + if (mRootObject.notNull() && mRootObject->isDead()) + { + mRootObject = NULL; + } + + F32 max_scale = get_default_max_prim_scale(LLPickInfo::isFlora(mObject)); + + getChild("Scale X")->setMaxValue(max_scale); + getChild("Scale Y")->setMaxValue(max_scale); + getChild("Scale Z")->setMaxValue(max_scale); } void LLPanelObject::draw() { - const LLColor4 white( 1.0f, 1.0f, 1.0f, 1); - const LLColor4 red( 1.0f, 0.25f, 0.f, 1); - const LLColor4 green( 0.f, 1.0f, 0.f, 1); - const LLColor4 blue( 0.f, 0.5f, 1.0f, 1); - - // Tune the colors of the labels - LLTool* tool = LLToolMgr::getInstance()->getCurrentTool(); - - if (tool == LLToolCompTranslate::getInstance()) - { - mCtrlPosX ->setLabelColor(red); - mCtrlPosY ->setLabelColor(green); - mCtrlPosZ ->setLabelColor(blue); - - mCtrlScaleX ->setLabelColor(white); - mCtrlScaleY ->setLabelColor(white); - mCtrlScaleZ ->setLabelColor(white); - - mCtrlRotX ->setLabelColor(white); - mCtrlRotY ->setLabelColor(white); - mCtrlRotZ ->setLabelColor(white); - } - else if ( tool == LLToolCompScale::getInstance() ) - { - mCtrlPosX ->setLabelColor(white); - mCtrlPosY ->setLabelColor(white); - mCtrlPosZ ->setLabelColor(white); - - mCtrlScaleX ->setLabelColor(red); - mCtrlScaleY ->setLabelColor(green); - mCtrlScaleZ ->setLabelColor(blue); - - mCtrlRotX ->setLabelColor(white); - mCtrlRotY ->setLabelColor(white); - mCtrlRotZ ->setLabelColor(white); - } - else if ( tool == LLToolCompRotate::getInstance() ) - { - mCtrlPosX ->setLabelColor(white); - mCtrlPosY ->setLabelColor(white); - mCtrlPosZ ->setLabelColor(white); - - mCtrlScaleX ->setLabelColor(white); - mCtrlScaleY ->setLabelColor(white); - mCtrlScaleZ ->setLabelColor(white); - - mCtrlRotX ->setLabelColor(red); - mCtrlRotY ->setLabelColor(green); - mCtrlRotZ ->setLabelColor(blue); - } - else - { - mCtrlPosX ->setLabelColor(white); - mCtrlPosY ->setLabelColor(white); - mCtrlPosZ ->setLabelColor(white); - - mCtrlScaleX ->setLabelColor(white); - mCtrlScaleY ->setLabelColor(white); - mCtrlScaleZ ->setLabelColor(white); - - mCtrlRotX ->setLabelColor(white); - mCtrlRotY ->setLabelColor(white); - mCtrlRotZ ->setLabelColor(white); - } - - LLPanel::draw(); + const LLColor4 white( 1.0f, 1.0f, 1.0f, 1); + const LLColor4 red( 1.0f, 0.25f, 0.f, 1); + const LLColor4 green( 0.f, 1.0f, 0.f, 1); + const LLColor4 blue( 0.f, 0.5f, 1.0f, 1); + + // Tune the colors of the labels + LLTool* tool = LLToolMgr::getInstance()->getCurrentTool(); + + if (tool == LLToolCompTranslate::getInstance()) + { + mCtrlPosX ->setLabelColor(red); + mCtrlPosY ->setLabelColor(green); + mCtrlPosZ ->setLabelColor(blue); + + mCtrlScaleX ->setLabelColor(white); + mCtrlScaleY ->setLabelColor(white); + mCtrlScaleZ ->setLabelColor(white); + + mCtrlRotX ->setLabelColor(white); + mCtrlRotY ->setLabelColor(white); + mCtrlRotZ ->setLabelColor(white); + } + else if ( tool == LLToolCompScale::getInstance() ) + { + mCtrlPosX ->setLabelColor(white); + mCtrlPosY ->setLabelColor(white); + mCtrlPosZ ->setLabelColor(white); + + mCtrlScaleX ->setLabelColor(red); + mCtrlScaleY ->setLabelColor(green); + mCtrlScaleZ ->setLabelColor(blue); + + mCtrlRotX ->setLabelColor(white); + mCtrlRotY ->setLabelColor(white); + mCtrlRotZ ->setLabelColor(white); + } + else if ( tool == LLToolCompRotate::getInstance() ) + { + mCtrlPosX ->setLabelColor(white); + mCtrlPosY ->setLabelColor(white); + mCtrlPosZ ->setLabelColor(white); + + mCtrlScaleX ->setLabelColor(white); + mCtrlScaleY ->setLabelColor(white); + mCtrlScaleZ ->setLabelColor(white); + + mCtrlRotX ->setLabelColor(red); + mCtrlRotY ->setLabelColor(green); + mCtrlRotZ ->setLabelColor(blue); + } + else + { + mCtrlPosX ->setLabelColor(white); + mCtrlPosY ->setLabelColor(white); + mCtrlPosZ ->setLabelColor(white); + + mCtrlScaleX ->setLabelColor(white); + mCtrlScaleY ->setLabelColor(white); + mCtrlScaleZ ->setLabelColor(white); + + mCtrlRotX ->setLabelColor(white); + mCtrlRotY ->setLabelColor(white); + mCtrlRotZ ->setLabelColor(white); + } + + LLPanel::draw(); } // virtual void LLPanelObject::clearCtrls() { - LLPanel::clearCtrls(); - - mCheckLock ->set(FALSE); - mCheckLock ->setEnabled( FALSE ); - mCheckPhysics ->set(FALSE); - mCheckPhysics ->setEnabled( FALSE ); - mCheckTemporary ->set(FALSE); - mCheckTemporary ->setEnabled( FALSE ); - mCheckPhantom ->set(FALSE); - mCheckPhantom ->setEnabled( FALSE ); - - // Disable text labels - mLabelPosition ->setEnabled( FALSE ); - mLabelSize ->setEnabled( FALSE ); - mLabelRotation ->setEnabled( FALSE ); - mLabelCut ->setEnabled( FALSE ); - mLabelHollow ->setEnabled( FALSE ); - mLabelHoleType ->setEnabled( FALSE ); - mLabelTwist ->setEnabled( FALSE ); - mLabelSkew ->setEnabled( FALSE ); - mLabelShear ->setEnabled( FALSE ); - mLabelTaper ->setEnabled( FALSE ); - mLabelRadiusOffset->setEnabled( FALSE ); - mLabelRevolutions->setEnabled( FALSE ); - - getChildView("scale_hole")->setEnabled(FALSE); - getChildView("scale_taper")->setEnabled(FALSE); - getChildView("advanced_cut")->setEnabled(FALSE); - getChildView("advanced_dimple")->setEnabled(FALSE); - getChildView("advanced_slice")->setVisible( FALSE); + LLPanel::clearCtrls(); + + mCheckLock ->set(FALSE); + mCheckLock ->setEnabled( FALSE ); + mCheckPhysics ->set(FALSE); + mCheckPhysics ->setEnabled( FALSE ); + mCheckTemporary ->set(FALSE); + mCheckTemporary ->setEnabled( FALSE ); + mCheckPhantom ->set(FALSE); + mCheckPhantom ->setEnabled( FALSE ); + + // Disable text labels + mLabelPosition ->setEnabled( FALSE ); + mLabelSize ->setEnabled( FALSE ); + mLabelRotation ->setEnabled( FALSE ); + mLabelCut ->setEnabled( FALSE ); + mLabelHollow ->setEnabled( FALSE ); + mLabelHoleType ->setEnabled( FALSE ); + mLabelTwist ->setEnabled( FALSE ); + mLabelSkew ->setEnabled( FALSE ); + mLabelShear ->setEnabled( FALSE ); + mLabelTaper ->setEnabled( FALSE ); + mLabelRadiusOffset->setEnabled( FALSE ); + mLabelRevolutions->setEnabled( FALSE ); + + getChildView("scale_hole")->setEnabled(FALSE); + getChildView("scale_taper")->setEnabled(FALSE); + getChildView("advanced_cut")->setEnabled(FALSE); + getChildView("advanced_dimple")->setEnabled(FALSE); + getChildView("advanced_slice")->setVisible( FALSE); } // @@ -1927,116 +1927,116 @@ void LLPanelObject::clearCtrls() // static void LLPanelObject::onCommitLock(LLUICtrl *ctrl, void *data) { - // Checkbox will have toggled itself - LLPanelObject *self = (LLPanelObject *)data; + // Checkbox will have toggled itself + LLPanelObject *self = (LLPanelObject *)data; + + if(self->mRootObject.isNull()) return; - if(self->mRootObject.isNull()) return; + BOOL new_state = self->mCheckLock->get(); - BOOL new_state = self->mCheckLock->get(); - - LLSelectMgr::getInstance()->selectionSetObjectPermissions(PERM_OWNER, !new_state, PERM_MOVE | PERM_MODIFY); + LLSelectMgr::getInstance()->selectionSetObjectPermissions(PERM_OWNER, !new_state, PERM_MOVE | PERM_MODIFY); } // static void LLPanelObject::onCommitPosition( LLUICtrl* ctrl, void* userdata ) { - LLPanelObject* self = (LLPanelObject*) userdata; - BOOL btn_down = ((LLSpinCtrl*)ctrl)->isMouseHeldDown() ; - self->sendPosition(btn_down); + LLPanelObject* self = (LLPanelObject*) userdata; + BOOL btn_down = ((LLSpinCtrl*)ctrl)->isMouseHeldDown() ; + self->sendPosition(btn_down); } // static void LLPanelObject::onCommitScale( LLUICtrl* ctrl, void* userdata ) { - LLPanelObject* self = (LLPanelObject*) userdata; - BOOL btn_down = ((LLSpinCtrl*)ctrl)->isMouseHeldDown() ; - self->sendScale(btn_down); + LLPanelObject* self = (LLPanelObject*) userdata; + BOOL btn_down = ((LLSpinCtrl*)ctrl)->isMouseHeldDown() ; + self->sendScale(btn_down); } // static void LLPanelObject::onCommitRotation( LLUICtrl* ctrl, void* userdata ) { - LLPanelObject* self = (LLPanelObject*) userdata; - BOOL btn_down = ((LLSpinCtrl*)ctrl)->isMouseHeldDown() ; - self->sendRotation(btn_down); + LLPanelObject* self = (LLPanelObject*) userdata; + BOOL btn_down = ((LLSpinCtrl*)ctrl)->isMouseHeldDown() ; + self->sendRotation(btn_down); } // static void LLPanelObject::onCommitPhysics( LLUICtrl* ctrl, void* userdata ) { - LLPanelObject* self = (LLPanelObject*) userdata; - self->sendIsPhysical(); + LLPanelObject* self = (LLPanelObject*) userdata; + self->sendIsPhysical(); } // static void LLPanelObject::onCommitTemporary( LLUICtrl* ctrl, void* userdata ) { - LLPanelObject* self = (LLPanelObject*) userdata; - self->sendIsTemporary(); + LLPanelObject* self = (LLPanelObject*) userdata; + self->sendIsTemporary(); } // static void LLPanelObject::onCommitPhantom( LLUICtrl* ctrl, void* userdata ) { - LLPanelObject* self = (LLPanelObject*) userdata; - self->sendIsPhantom(); + LLPanelObject* self = (LLPanelObject*) userdata; + self->sendIsPhantom(); } void LLPanelObject::onSelectSculpt(const LLSD& data) { LLTextureCtrl* mTextureCtrl = getChild("sculpt texture control"); - if (mTextureCtrl) - { - mSculptTextureRevert = mTextureCtrl->getImageAssetID(); - } - - sendSculpt(); + if (mTextureCtrl) + { + mSculptTextureRevert = mTextureCtrl->getImageAssetID(); + } + + sendSculpt(); } void LLPanelObject::onCommitSculpt( const LLSD& data ) { - sendSculpt(); + sendSculpt(); } BOOL LLPanelObject::onDropSculpt(LLInventoryItem* item) { LLTextureCtrl* mTextureCtrl = getChild("sculpt texture control"); - if (mTextureCtrl) - { - LLUUID asset = item->getAssetUUID(); + if (mTextureCtrl) + { + LLUUID asset = item->getAssetUUID(); - mTextureCtrl->setImageAssetID(asset); - mSculptTextureRevert = asset; - } + mTextureCtrl->setImageAssetID(asset); + mSculptTextureRevert = asset; + } - return TRUE; + return TRUE; } void LLPanelObject::onCancelSculpt(const LLSD& data) { - LLTextureCtrl* mTextureCtrl = getChild("sculpt texture control"); - if(!mTextureCtrl) - return; - - if(mSculptTextureRevert == LLUUID::null) - { - mSculptTextureRevert = LLUUID(SCULPT_DEFAULT_TEXTURE); - } - mTextureCtrl->setImageAssetID(mSculptTextureRevert); - - sendSculpt(); + LLTextureCtrl* mTextureCtrl = getChild("sculpt texture control"); + if(!mTextureCtrl) + return; + + if(mSculptTextureRevert == LLUUID::null) + { + mSculptTextureRevert = LLUUID(SCULPT_DEFAULT_TEXTURE); + } + mTextureCtrl->setImageAssetID(mSculptTextureRevert); + + sendSculpt(); } // static void LLPanelObject::onCommitSculptType(LLUICtrl *ctrl, void* userdata) { - LLPanelObject* self = (LLPanelObject*) userdata; + LLPanelObject* self = (LLPanelObject*) userdata; - self->sendSculpt(); + self->sendSculpt(); } void LLPanelObject::menuDoToSelected(const LLSD& userdata) -- cgit v1.2.3