Age | Commit message (Collapse) | Author |
|
fix for EXT-7500: Texture Jamming problems with http texture off;
|
|
Added a third visual param group VISUAL_PARAM_GROUP_TWEAKABLE_NO_TRANSMIT
to specify visual params that are user-tweakable, but should not be sent
over the network.
We should have this group *only* for new user-tweakable visual parameters
that should not be sent over the network. These should only be used for
*new* parameters that only contribute to the generation of baked textures.
Code reviewed by Richard
|
|
or outfit editor is exited.
reviewed and contributed to by Nyx
|
|
One step closer to full support of multi-wearables architecture
code will be reviewed before pushing.
|
|
Final fixes for:
EXT-7209 camera to enter appearance edit mode
EXT-7366 change camera to face front of avatar in previews
EXT-7213 kill old appearance editor
Partial fix for:
EXT-7392 alpha mask checkboxes are not hooked up
All changes code reviewed by vir. Following commits (plus this one) reviewed with this checkin:
425d4e960450
15d04b6464a7
e92ae606de12
adc94512ea9b
24577dbbf7a4
6f28b241eae2
(sorry dessie! :) )
|
|
Removed last remaining references to gFloaterCustomize.
Next step: kill the files themselves.
Will be reviewed when complete, before pushing
|
|
part 2 - correcting a few points that would have broken the build.
Final version will be reviewed before pushing.
|
|
First pass - eliminated all references to gFloaterCustomize except
those that call saveIfDirty. Haven't compiled, haven't reviewed.
Will clean up in further patches and get reviewed before pushing.
|
|
Added TextureDiscardLevel override for specifying texture discard levels.
Aesthetic change to add debug- flag to all avatar debug reporting metrics.
|
|
methodology
Had three different versions of the same function, one which didn't even have an implementation. Collapsed these down to two and use function overloading to have them use the same name.
|
|
for each component texture at each discard level, as well as baked texture
upload times, and reports the timing of each texture to the console when your
avatar sends out its appearance data to the server.
Reviewed by Seraph, will be removed before release.
-Nyx
|
|
Change enum naming to use WT_INVALID=255 instead of WT_NONE=255. Added WT_NONE as -1.
|
|
Refactored LLWearableDictionary to look more like LLAssetType/LLFolderType/etc. in terms of code design. This required a lot of superficial changes across many files. Overall functionality has not changed.
|
|
Superficial cleanup to replace all instances of "gAgentAvatar" with "gAgentAvatarp".
|
|
Superficial cleanup to replace all instances of "LLVOAvatarSelf *avatarp = gAgent.getAvatarObject" with "gAgentAvatar".
|
|
Superficial cleanup so that all instances of gAgent.getAvatarObject() use "LLVOAvatarSelf *avatarp = gAgent.getAvatarObject".
|
|
Lots of superficial cleanup, particularly around "if (" formatting.
Removed LLAgent as a friend of LLAgentCamera and refactored to use accessors.
|
|
Minor superficial cleanup to have all references to getAvatarObject use LLVOAvatarSelf *avatarp = gAgent.getAvatarObject()
|
|
Removing log spam before pushing to main branch. change is de minimis. -Nyx
|
|
Added code to suppress local composite updates while wearables are loaded. This
makes sure that we don't update your appearance until all your wearables are
added to gAgentWearables. Hackish for 2.0, but will be inherently better for 2.1
code reviewed by vir.
|
|
cross-wearable params are fun! Values were not being updated properly for
parameters that cross multiple wearables. Created a few functions to ensure
that these values get updated and made them called from
LLAgentWearables::wearableUpdated().
Also prevented cross-wearable params from writing back to the avatar, as they
are being driven by another wearable.
Code reviewed by Bigpapi
|
|
|
|
Checker: RESOURCE_LEAK
Function: LLAgentWearables::addLocalTextureObject(EWearableType, LLVOAvatarDefines::ETextureIndex, unsigned int)
File: /indra/newview/llagentwearables.cpp
|
|
following changes:
1) remove renderavatarinvisible - no longer need this debug setting
2) add showobjectrenderingcost (default:TRUE) so we can turn this feature off if necessary
3) add showdebugappearanceeditor (default:FALSE) so we can test the future appearance editor
code reviewed by vir and seraph
--HG--
branch : avatar-pipeline
|
|
The name stored in an LLWearable object is not always in sync with the
LLInventoryItem name. Since we reference these by asset id, which does not
change when you rename something (only the LLInventoryItem changes).
Fixed by refreshing the name from the LLInventoryItem every time we wear the
object. If we are already wearing the object, the wearable's name is already
explicitly updated.
Code reviewed by Bigpapi
--HG--
branch : avatar-pipeline
|
|
--HG--
branch : avatar-pipeline
|
|
llviewermessages.cpp
|
|
Apparently none of the texture pickers were invalidating the baked textures
causing selected textures to not appear on the avatar until you actually saved
the wearable. This patch forces the composites to update when you change any
texture or color (or invisibility flag).
Code reviewed by Seraph
--HG--
branch : avatar-pipeline
|
|
Cuts number of includes of llnotifications.h from 300+ to 40.
|
|
Fixed many other includes related to this file.
Cleaned out llfloatertestlistview to be an empty test floater.
|
|
Re-opening issue for a second pass at it. This pass updates the code that was
intended to make all loaded wearables auto-save themselves back to wearable
version 22 (from 24). Code was not being hit, so relocated it to after wearable
had been added to llagentwearables to ensure the save succeeded.
Will be post-reviewed before push.
--HG--
branch : avatar-pipeline
|
|
Added gInventory.notifyObservers to idle callbacks so it gets triggered without explicit notifyObservers synchronization.
Added more state tracking for attachments, wearables, and links of those types, so that they're marked as changed properly.
|
|
Incrementing wearable version number was a bad thing here - we want to
keep all wearables reporting as version 22 until we make a breaking change.
Reverted the version number and put in a hack to force any version 24 wearables
to be re-saved as version 22. The hack can be removed before release, as it
should only affect internal testers.
Code reviewed by Seraph
--HG--
branch : avatar-pipeline
|
|
Visual param definitions weren't working properly when the wearable being
loaded had fewer visual parameters than the current definition of the wearable.
This occurred when you were loading wearables that had been created in older
versions of the client (or from the library).
Added missing parameters to mSavedVisualParamMap, and modified revertValues()
to ensure that the two maps are kept fully in sync on finishing loading the
wearable and when reverting the values.
Code reviewed by Vir
--HG--
branch : avatar-pipeline
|
|
removed ambiguous parameter "set_by_user" from many places in codebase,
renaming it to be upload_bake, which is a more accurate descriptor.
This allowed me to see several inconsistencies in how this variable was
being set - these errors were also fixed. User-visible result should be
that baked textures are not reuploaded on changing avatar sex until the
save button is pressed. primary win here is code clarity.
Code reviewed by Bigpapi.
|
|
problem was caused by triggering updateMeshTextures() every time visual params
or textures were changed on your base avatar object. The latest structure
makes the parameters and textures in the wearables authoritative, causing them
to be copied to the avatar on a regular basis. This resulted in way too many callbacks
to be registered while waiting for baked textures to be uploaded.
Fixed by removing many calls to updateMeshTextures() and ensuring that it gets called
every time an appropriate param or texture actually changes, or a wearable gets
added/removed. This appears to cut the number of callbacks to a reasonable level.
Code reviewed by Bigpapi.
|
|
|
|
|
|
|
|
|
|
Several fixes here:
1) minor rename in argument of setIsDummy
2) corrected parameter set_by_user to calls of setVisualParamWeight where we
shouldn't be animating
3) ensured finally that mIsDummy is set properly for all wearable parameters
4) ensured that mIsDUmmy is set properly for non-wearable based parameters on
your own avatar
Code reviewed by Bigpapi
|
|
cloned visual params were picking up the mIsDummy flag from their
parents. modified the createVisualParams function to reset this flag.
code reviewed by Seraph
|
|
First round of fixes for trying to fix the visual param animations
Code reviewed by Seraph
|
|
Visual param sliders were not being updated to affect the new wearable created
after a save was performed. Created a reset() function to do this which gets called
after the new object is created.
Code reviewed by Seraph
|
|
|
|
issue was in the isDirty() function - one case where images in the wearable get added caused
the function to return FALSE when it should have returned TRUE. Now wearables that you change
the images of will be detected as dirty and will save properly.
Code reviewed by Bigpapi.
|
|
|
|
Texture changes in appearance editor were not taking effect immediately. Changed texture setting code to refresh local bake of textures.
Code reviewed by Vir
|
|
|
|
an explicit include for LLViewerFetchedTexture because it's used for
a template specialization, and fixed LLLocalTextureObject constructor
to take a const LLUUID reference so locals can be passed.
|