| Age | Commit message (Collapse) | Author |
|---|
|
it more clear which header strings should be used for incoming vs outgoing situations.
Using constants for commonly used llhttpnode context strings.
|
|
changes to common libraries from the server codebase:
* Additional error checking in http handlers.
* Uniform log spam for http errors.
* Switch to using constants for http heads and status codes.
* Fixed bugs in incorrectly checking if parsing LLSD xml resulted in an error.
* Reduced spam regarding LLSD parsing errors in the default completedRaw http handler. It should not longer be necessary to short-circuit completedRaw to avoid spam.
* Ported over a few bug fixes from the server code.
* Switch mode http status codes to use S32 instead of U32.
* Ported LLSD::asStringRef from server code; avoids copying strings all over the place.
* Ported server change to LLSD::asBinary; this always returns a reference now instead of copying the entire binary blob.
* Ported server pretty notation format (and pretty binary format) to llsd serialization.
* The new LLCurl::Responder API no longer has two error handlers to choose from. Overriding the following methods have been deprecated:
** error - use httpFailure
** errorWithContent - use httpFailure
** result - use httpSuccess
** completed - use httpCompleted
** completedHeader - no longer necessary; call getResponseHeaders() from a completion method to obtain these headers.
* In order to 'catch' a completed http request, override one of these methods:
** httpSuccess - Called for any 2xx status code.
** httpFailure - Called for any non-2xx status code.
** httpComplete - Called for all status codes. Default implementation is to call either httpSuccess or httpFailure.
* It is recommended to keep these methods protected/private in order to avoid triggering of these methods without using a 'push' method (see below).
* Uniform error handling should followed whenever possible by calling a variant of this during httpFailure:
** llwarns << dumpResponse() << llendl;
* Be sure to include LOG_CLASS(your_class_name) in your class in order for the log entry to give more context.
* In order to 'push' a result into the responder, you should no longer call error, errorWithContent, result, or completed.
* Nor should you directly call httpSuccess/Failure/Completed (unless passing a message up to a parent class).
* Instead, you can set the internal content of a responder and trigger a corresponding method using the following methods:
** successResult - Sets results and calls httpSuccess
** failureResult - Sets results and calls httpFailure
** completedResult - Sets results and calls httpCompleted
* To obtain information about a the response from a reponder method, use the following getters:
** getStatus - HTTP status code
** getReason - Reason string
** getContent - Content (Parsed body LLSD)
** getResponseHeaders - Response Headers (LLSD map)
** getHTTPMethod - HTTP method of the request
** getURL - URL of the request
* It is still possible to override completeRaw if you want to manipulate data directly out of LLPumpIO.
* See indra/llmessage/llcurl.h for more information.
|
|
|
|
reviewed with Simon
|
|
In a number of different places, for different reasons, the viewer wants to
load a UI-related file that might be overridden by a non-default skin; and
within that skin, might further be overridden by a non-default language.
Apparently, for each of those use cases, every individual developer approached
it as an entirely new problem, solving it idiosyncratically for that one case.
Not only is this a maintenance problem, but it rubs one's nose in the fact
that most such solutions consider only a subset of the relevant skin
directories.
Richard and I evolved an API intended to address all such cases: a central
LLDir method returning a list of relevant pathnames, from most general to most
localized, filtered to present only existing files; plus a couple of
convenience methods to specifically obtain the most general and most localized
available file.
There were several load-skinned-file methods (LLFloater::buildFromFile(),
LLPanel::buildFromFile() and LLUICtrlFactory::createFromFile() -- apparently
cloned-and-modified from each other) that contained funky bolted-on logic to
output the loaded data to an optional passed LLXMLNodePtr param. The trouble
is that passing that param forced each of these methods to subvert its normal
search: specifically for that case, it needed to find the baseline XML file
instead of the localized one. Richard agreed that for the intended usage
(reformatting XML files) we should use XML schema instead, and that the hacky
functionality should be removed. Remove it. Also remove
LLUICtrlFactory::getLocalizedXMLNode(), only used for those three special cases.
Some callers explicitly passed the optional LLXMLNodePtr param as NULL. Remove
that.
Remove LLFloaterUIPreview::displayFloater(save) param, which relied on the
optional output LLXMLNodePtr param. Make onClickSaveFloater() and
onClickSaveAll() emit popupAndPrintWarning() about discontinued functionality.
Recast LLFloater::buildFromFile(), LLPanel::buildFromFile(),
LLUICtrlFactory::createFromFile(), LLNotifications::loadTemplates(),
LLUI::locateSkin(), LLFontRegistry::parseFontInfo(),
LLUIColorTable::loadFromSettings(), LLUICtrlFactory::loadWidgetTemplate(),
LLUICtrlFactory::getLayeredXMLNode(), LLUIImageList::initFromFile(),
LLAppViewer::launchUpdater() and LLMediaCtrl::navigateToLocalPage() to use
findSkinnedFilenames(). (Is LLAppViewer::launchUpdater() ever called any more?
Apparently so -- though the linux-updater.bin logic to process the relevant
command-line switch has been disabled. Shrug.) (Is
LLMediaCtrl::navigateToLocalPage() ever used?? If so, why?)
Remove LLUI::setupPaths(), getXUIPaths(), getSkinPath() and
getLocalizedSkinPath(). Remove the skins/paths.xml file read by setupPaths().
The only configuration it contained was the pair of partial paths "xui/en" and
"xui/[LANGUAGE]" -- hardly likely to change. getSkinPath() specifically
returned the first of these, while getLocalizedSkinPath() specifically
returned the second. This knowledge is now embedded in findSkinnedFilenames().
Also remove paths.xml from viewer_manifest.py.
Remove injected xui_paths from LLFontGL::initClass() and
LLFontRegistry::LLFontRegistry(). These are no longer needed since
LLFontRegistry can now directly consult LLDir for its path search. Stop
passing LLUI::getXUIPaths() to LLFontGL::initClass() in LLViewerWindow's
constructor and initFonts() method.
Add LLDir::append() and add() methods for the simple task of combining two
path components separated by getDirDelimiter() -- but only if they're both
non-empty. Amazing how often that logic is replicated. Replace some existing
concatenations with add() or append().
New LLDir::findSkinnedFilenames() method must know current language. Allow
injecting current language by adding an LLDir::setSkinFolder(language) param,
and pass it where LLAppViewer::init() and initConfiguration() currently call
setSkinFolder(). Also add LLDir::getSkinFolder() and getLanguage() methods.
Change LLFLoaterUIPreview's LLLocalizationResetForcer helper to "forcibly
reset language" using LLDir::setSkinFolder() instead of LLUI::setupPaths().
Update LLDir stubs in lldir_stub.cpp and llupdaterservice_test.cpp.
Add LLDir::getUserDefaultSkinDir() to obtain often-overlooked possible skin
directory -- like getUserSkinDir() but with "default" in place of the current
skin name as the last path component. (However, we hope findSkinnedFilenames()
obviates most explicit use of such individual skin directory pathnames.)
Add LLDir unit tests for new findSkinnedFilenames() and add() methods -- the
latter exercises append() as well.
Tweak indra/integration_tests/llui_libtest/llui_libtest.cpp for all the above.
Notably, comment out its export_test_floaters() function, since the essential
LLFloater::buildFromFile(optional LLXMLNodePtr) functionality has been
removed. This may mean that llui_libtest.cpp has little remaining value, not
sure.
|
|
|
|
|
|
EXP-1854 FIX Text positioning in mini inspector a couple pixels too low
|
|
|
|
|
|
|
|
|
|
outbox panel created.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
discussed and reviewed by callum.
|
|
|
|
|
|
increased
Co-written with Robin Cornelius
|
|
|
|
|
|
|
|
|
|
* Fixed setting to always display the inbox inventory panel.
|
|
not exist
* Moved marketplace URL related functions into a new file llmarketplacefunctions.cpp/h.
This will the future home of more marketplace-related functions.
* Disabled sync button when the marketplace API is unavailable.
|
|
|
|
|
|
|
|
|
|
progress etc. to make debugging problems easier
|
|
marketplace and to indicate drag and drop targets.
EXP-858 PROGRESS -- Outbox sync failure error handling
EXP-908 FIX -- Hide outbox when appropriate
EXP-1062 FIX -- Add modal dialog for outbox sync complete
EXP-1096 FIX -- Extra space below Received Items panel for an account that does not have a Merchant Account setup, no outbox display
EXP-1104 FIX -- User can activate Merchant Outbox synch button when outbox is empty
* Added separate class for outbox view to support error tag rendering
* Added confirmation for sync complete.
* Added different outbox messages for empty outbox, non-merchant and error: merchant but no outbox
* Progress on a bunch of other fronts.
|
|
* Added outbox item count to outbox button title
* Updated sync loading indicator to keep moving until http request complete
* Updated outbox panel display to use user_status http get response
* Removed inbox/outbox folder name hack from LLInventoryPanel
|
|
|
|
or loading screen instead of using a hard cut
EXP-938 Turn off in-world audio until fade from intro/loading page complete
EXP-939 Fade from intro/loading page to world, not to image of last login
|
|
The presence of the inbox folder now forces the "Received Items" folder to be visible.
The same logic applies to the outbox as well.
Reviewed by Richard.
|
|
showing on linux viewer
|
|
|
|
|
|
current state of the SL client, such as avatar location
|
|
|
