| Age | Commit message (Collapse) | Author |
|---|
|
|
|
The LLURI::buildHTTP() overloads that take an LLSD 'path' accept 'undefined',
LLSD::String and (LLSD::Array of LLSD::String). A sequence of path components
passed in an Array is constructed into a slash-separated path. There are unit
tests in lluri_test.cpp to exercise that case.
To my amazement, there were NO unit tests covering the case of an LLSD::String
path. The code for that case escaped and appended the entire passed string.
While that might be fine for a 'path' consisting of a single undecorated path
component, the available documentation does not forbid one from passing a path
containing slashes as well. But this had the dubious effect of replacing every
slash with %2F.
In particular, decomposing a URL string with one LLURI instance and
constructing another like it using LLURI::buildHTTP() was not symmetrical.
Having consulted with Richard, I made the string-path logic a bit more nuanced:
- The passed path string is split on slashes. Every path component is
individually escaped, then recombined with slashes into the final path.
- Duplicate slashes are eliminated.
- The presence or absence of a trailing slash in the original path string is
carefully respected.
Now that we've nailed down how it ought to behave -- added unit tests to
ensure that it DOES behave that way!!
|
|
Big delta was converting the new texture debugger support code
to the new library. Viewer manifest should probably get an eyeball
before release.
|
|
|
|
That is, when the underlying LLError::Settings object is destroyed -- possibly
at termination, possibly on LLError::restoreSettings() -- the passed Recorder*
is deleted.
There was much existing code that seemed as unaware of this alarming fact as I
was myself. Passing to addRecorder() a pointer to a stack object, or to a
member of some other object, is just Bad. It might be preferable to make
addRecorder() accept std::auto_ptr<Recorder> to make the ownership transfer
more explicit -- or even boost::shared_ptr<Recorder> instead, which would
allow the caller to either forget or retain the passed Recorder.
This preliminary pass retains the Recorder* dumb pointer API, but documents
the ownership issue, and eliminates known instances of passing pointers to
anything but a standalone heap Recorder subclass object.
|
|
This test must not be subject to spurious environmental failures, else some
kind soul will disable it entirely. We observe that APR specifies a hard-coded
buffer size of 64Kbytes for pipe creation -- use that and cross fingers.
|
|
Sigh, the rejoicing was premature.
|
|
If in fact we've managed to fix the APR bug writing to a Windows named pipe,
it should no longer be necessary to try to work around it by testing with a
much smaller data volume on Windows!
|
|
Ideally we'd love to be able to nail the underlying bug, but log output
suggests it may actually go all the way down to the OS level. To move forward,
try to bypass it.
|
|
We want to write a robust test that consistently works. On Windows, that
appears to require constraining the max message size. I, the coder, could try
submitting test runs of varying sizes to TC until I found a size that works...
but that could take quite a while. If I were clever, I might even use a manual
binary search. But computers are good at binary searching; there are even
prepackaged algorithms in the STL. If I were cleverer still, I could make the
test program itself search for size that works.
|
|
Apparently, at least on Mac, there are circumstances in which the very-large-
message test can take several times longer than normal, yet still complete
successfully. This is always the problem with timeouts: does timeout
expiration mean that the code in question is actually hung, or would it
complete if given a bit longer?
If very-large-message test fails, retry a few times with smaller sizes to try
to find a size at which the test runs reliably. The default size, ca 1MB, is
intended to be substantially larger than anything we'll encounter in the wild.
Is that "unreasonably" large? Is there a "reasonable" size at which the test
could consistently pass? Is that "reasonable" size still larger than what we
expect to encounter in practice? Need more information, hence this code.
|
|
Otherwise, a stuck child process could potentially hang the test, and thus the
whole viewer build.
|
|
It seems that under certain circumstances, write logic was duplicating a chunk
of the data being streamed down our pipe. But as this condition is only driven
with a very large data stream, eyeballing that data stream is tedious. Add
code to compare the raw received data with the expected stream, reporting
where and how they first differ.
|
|
That lets us reliably declare the operator<<() free function inline, which
permits multiple translation units in the same executable to #include
"wrapllerrs.h".
|
|
While we're accumulating the 'length:' prefix, the present socket-based logic
reads 20 characters, then reads 'length' more, then discards any excess (in
case the whole 'length:data' packet ends up being less than 20 characters).
That's probably a bug: whatever characters follow that packet, however short
it may be, are probably the 'length:' prefix of the next packet. We probably
only get away with it because we probably never send packets that short.
Earlier llleap_test.cpp plugin logic still read 20 characters, then, if there
were any left after the present packet, cached them as the start of the next
packet. This is probably more correct, but complicated. Easier just to read
individual characters until we've seen 'length:', then try for exactly the
specified length over however many reads that requires.
|
|
In load testing, we have observed intermittent failures on Windows in which
LLSDNotationStreamer into std::ostringstream seems to bump into a hard limit
of 1048590 bytes. ostringstream reports that much buffered data and returns
that much -- even though, on examination, the notation-serialized stream is
incomplete at that point. It's our intention to load-test LLLeap and
LLProcess, not the local iostream implementation; we hope that this kind of
data volume is comfortably greater than actual usage. Back off the
load-testing max size a bit.
|
|
New llleap_test.cpp load testing turned up Windows issue in which plugin
process received corrupt packet, producing LLSDParseError. Add code to dump
the bad packet in that case -- but if LLSDParseError is willing to state the
offset of the problem, not ALL of the packet.
Quiet MSVC warning about little internal base class needing virtual destructor.
|
|
|
|
|
|
These tests rule out corruption as we cross buffer boundaries in OS pipes and
the LLLeap implementation itself.
|
|
It only took a few examples of trying to wrangle notation LLSD as string data
to illustrate how clumsy that is. I'd forgotten that a couple other TUT tests
already invoke Python code that depends on the llsd module. The trick is to
recognize that at least as of now, there's still an obsolete version of the
module in the viewer's own source tree. Python code is careful to try
importing llbase.llsd before indra.base.llsd, so that if/when we finally do
clear indra/lib/python from the viewer repo, we need only require that llbase
be installed on every build machine.
|
|
Migrate logic from specific test to common reader module, notably parsing the
wakeup message containing the reply-pump name.
Make test script post to Result struct to communicate success/failure to C++
TUT test, rather than just writing to log.
Make test script insensitive to key order in serialized LLSD::Map.
|
|
|
|
Instantiating LLLeap with a command to execute a particular child process sets
up machinery to speak LLSD Event API Plugin protocol with that child process.
LLLeap is an LLInstanceTracker subclass, so the code that instantiates need
not hold the pointer. LLLeap monitors child-process termination and deletes
itself when done.
|
|
Of course, given the way the log machinery works, it's really "everything at
that level or stronger."
|
|
All known callers were using ensure(! withMessage(...).empty()). Centralize
that logic. Make failure message report the string being sought and the log
messages in which it wasn't found.
In case someone does want to permit the search to fail, add an optional
'required' parameter, default true.
Leverage new functionality in llprocess_test.cpp.
|
|
Giving more unit tests the ability to capture and examine log output is
generally useful. Renaming the class just makes it less ambiguous: what's a
TestRecorder? Something that records tests?
|
|
Previously one might get process-terminated notification but still have to
wait for the child process's final data to arrive on one or more ReadPipes.
That required complex consumer timing logic to handle incomplete pending
ReadPipe data, e.g. a partial last line with no terminating newline. New code
guarantees that by the time LLProcess sends process-terminated notification,
all pending pipe data will have been buffered in ReadPipes.
Document LLProcess::ReadPipe::getPump() notification event; add "eof" key.
Add LLProcess::ReadPipe::getline() and read() convenience methods.
Add static LLProcess::getline() and basename() convenience methods, publishing
logic already present elsewhere.
Use ReadPipe::getline() and read() in unit tests.
Add unit test for "eof" event on ReadPipe::getPump().
Add unit test verifying that final data have been buffered by termination
notification event.
|
|
|
|
|
|
We want to verify the sequence:
LLInstanceTracker constructor adds instance to underlying container
Subclass constructor throws exception
LLInstanceTracker destructor removes instance from underlying container.
|
|
|
|
For the T* specialization (no string, or whatever, key), the original
getInstance() method simply returned the passed-in T* value. It was defined,
as the comments noted, for completeness of the analogy with the keyed
LLInstanceTracker specialization.
It turns out, though, that getInstance(T*) can still be useful to ask whether
the T* you have in hand still references a valid T instance. Support that
usage.
|
|
This is an important differentiator between getTokens() and the present
LLCommandLineParser::parseCommandLineString() logic: you cannot currently
--set SomeVar to an empty string value because parseCommandLineString()
discards empty strings.
|
|
run_build_test.py already has the capability to set environment variables, and
we may as well direct it to set PYTHON to the running Python interpreter. That
completely eliminates one level of process wrapper.
|
|
We didn't have any tokenizer suitable for scanning something like a bash
command line. We do have a couple hacks, e.g. LLExternalEditor::tokenize() and
LLCommandLineParser::parseCommandLineString(). Both try to work around
boost::tokenizer limitations; but existing boost::tokenizer support just
doesn't address this case. Neither of the above is available as a general
scanner anyway, and parseCommandLineString() fails outright when passed "".
New getTokens() also distinguishes between "drop delimiters" (e.g. space,
return, newline) to be discarded from the token stream, versus "keep
delimiters" (e.g. "+-*/") to be returned as tokens in their own right.
There's an overload that honors escapes and a more efficient one that doesn't;
each has a convenience overload that returns the scanned string vector rather
than requiring a separate declaration.
Tweak and comment older getTokens() implementation.
Add unit tests for both old and new getTokens() implementations.
Break out StringVec and std::ostream << StringVec from
indra/llcommon/tests/listener.h to StringVec.h: that's coming in handy for a
number of different TUT test sources.
|
|
Clarify wording in some of the doc comments; be a bit more explicit about some
of the parameter fields.
Make some query methods 'const'.
Change default LLProcess::ReadPipe::getLimit() value to 0: don't post any
incoming data with notification event unless caller requests it. But do post
pertinent FILESLOT in case caller reuses same listener for both stdout and
stderr.
Use more idiomatic, readable syntax for accessing LLProcess::Params data.
|
|
If caller runs (e.g.) a Python script, it's not very helpful to a human log
reader to keep seeing LLProcess instances logged as /pathname/to/python (pid).
If caller is aware, the code can at least use the script name as the desc --
or maybe even a hint as to the script's purpose.
If caller doesn't explicitly pass a desc, at least shorten to just the
basename of the executable.
|
|
This way a caller need not spin on isRunning(); we can just listen for the
requested termination event.
Post a similar event containing error message if for any reason
LLProcess::create() failed to launch the child.
Add unit tests for both cases.
|
|
The typos didn't make for invalid tests, but they made a few tests redundant
while leaving other (subtly different) cases untested.
|
|
Add unit tests for peek() with substring args, reimplemented contains(),
various forms of find().
(yay unit tests)
|
|
|
|
If it's useful to have contains() to tell you whether incoming data contains a
particular substring, and if it's useful for contains() and peek() to accept
an offset within that data, then it's useful to allow you to get the offset of
a desired substring within that data. But of course a find() returning offset
needs something like std::string::npos for "not found"; borrow that
convention.
Support both find(const std::string&) and find(char); the latter permits a
more efficient implementation. In fact, make find(string) recognize a string
of length 1 and leverage the find(char) implementation.
Given that, reimplement contains(mumble) as shorthand for find(mumble) != npos.
Implement find() overloads using std::search() and std::find() on
boost::asio::streambuf character iterators, rather than copying to std::string
and then using string search like previous contains() implementation.
Reimplement WritePipeImpl::tick() and ReadPipeImpl::tick() to write/read
directly from/to boost::asio::streambuf data, instead of copying to/from a
temporary flat buffer.
As long as ReadPipeImpl::tick() keeps successfully filling buffers, keep
reading. Previous implementation would only handle a long child write over
successive tick() calls. Stop on read error or when we come up short.
|
|
|
|
These are all very well when we just want to dump the output to a log, or
whatever, but in a unit-test context it matters for comparison.
|
|
Also add "len" key to event data on LLProcess::getPump(). If you've used
setLimit(), event["data"].length() may not reflect the length of the
accumulated data in the ReadPipe.
Add unit test with stdin/stdout handshake with child process.
|
|
In the course of re-enabling the indra/test tests last year, Log generalized a
workaround I'd introduced in llsdmessage_test.cpp. In Linux viewer land, a
test program trying to catch an expected exception can't seem to catch it by
its specific class (across the libllcommon.so boundary), but must instead
catch std::runtime_error and validate the typeid().name() string. Log added a
macro for this idiom in llevents_tut.cpp. Generalize that macro further for
normal-case processing as well, move it to a header file of its own and use it
in all known places -- plus the new exception-catching tests in
llprocess_test.cpp.
|
|
|
|
Add LLProcess::FileParam to specify how to construct each child's standard
file slot, with lots of comments about features designed but not yet
implemented. The point is to design it with enough flexibility to be able to
extend to foreseeable use cases.
Add LLProcess::Params::files to collect up to 3 FileParam items. Naturally
this extends the accepted LLSD syntax as well.
Implement type="" (child inherits parent file descriptor) and "pipe" (parent
constructs anonymous pipe to pass to child).
Add LLProcess::FILESLOT enum, plus methods:
getReadPipe(FILESLOT), getOptReadPipe(FILESLOT)
getWritePipe(), getOptWritePipe()
getPipeName(FILESLOT): placeholder implementation for now
Add LLProcess::ReadPipe and WritePipe classes, as returned by get*Pipe().
WritePipe supports get_ostream() method for streaming to child stdin.
ReadPipe supports get_istream() method for reading from child stdout/stderr.
It also provides getPump() returning LLEventPump& so interested parties can
listen for arrival of new data on the aforementioned std::istream.
For "pipe" slots, instantiate appropriate *Pipe class.
ReadPipe and WritePipe classes are pure virtual bases for ReadPipeImpl and
WritePipeImpl, respectively: all implementation data are hidden in the latter
classes, visible only in llprocess.cpp. In fact each *PipeImpl class registers
itself for "mainloop" ticks, attempting nonblocking I/O to the underlying
apr_file_t on each tick. Data are buffered in a boost::asio::streambuf, which
bridges between std::[io]stream and the APR I/O calls.
Sanity-test ReadPipeImpl by using a pipe to absorb the Python "SyntaxError"
output from the successful syntax_error test, rather than alarming the user.
Add first few unit tests for validating FileParam. More tests coming!
|
|
When we reimplemented LLProcess on APR, necessitating APR's funny callback
mechanism to sense child-process status, every isRunning() or getStatus() call
called the APR poll function that calls ALL registered LLProcess callbacks. In
other words, every time any consumer called any LLProcess::isRunning() method,
all LLProcess callbacks were redundantly fired. Change that so that the single
APR poll function is called once per frame, courtesy of the "mainloop"
LLEventPump. Once per viewer frame should be well within the realtime duration
in which it's reasonable to expect child-process status to change.
In effect, this changes LLProcess's public API to introduce a dependency on
"mainloop" ticks. Add such ticks to llprocess_test.cpp as well.
|
