| Age | Commit message (Collapse) | Author |
|---|
|
LLSDNotationFormatter (also LLSDNotationStreamer that uses it, plus
operator<<(std::ostream&, const LLSD&) that uses LLSDNotationStreamer) is most
useful for displaying LLSD to a human, e.g. for logging. Having the default
dump raw binary bytes into the log file is not only suboptimal, it can
truncate the output if one of those bytes is '\0'. (This is a problem with the
logging subsystem, but that's a story for another day.)
Use OPTIONS_PRETTY_BINARY wherever there is a default LLSDFormatter
::EFormatterOptions argument.
Also, allow setting LLSDFormatter subclass boolalpha(), realFormat() and
format(options) using optional constructor arguments. Naturally, each subclass
that supports this must accept and forward these constructor arguments to its
LLSDFormatter base class constructor.
Fix a couple bugs in LLSDNotationFormatter::format_impl() for an LLSD::Binary
value with OPTIONS_PRETTY_BINARY:
- The code unconditionally emitted a b(len) type prefix followed by either raw
binary or hex, depending on the option flag. OPTIONS_PRETTY_BINARY caused it
to emit "0x" before the hex representation of the data. This is wrong in
that it can't be read back by either the C++ or the Python LLSD parser.
Correct OPTIONS_PRETTY_BINARY formatting consists of b16"hex digits" rather
than b(len)"raw bytes".
- Although the code did set hex mode, it didn't set either the field width or
the fill character, so that a byte value less than 16 would emit a single
digit rather than two.
Instead of having one LLSDFormatter::format() method with an optional options
argument, declare two overloads. The format() overload without options passes
the mOptions data member to the overload accepting options.
Refactor the LLSDFormatter family, hoisting the recursive format_impl() method
(accepting level) to a pure virtual method at LLSDFormatter base-class level.
Most subclasses therefore need not override either base-class format() method,
only format_impl(). In fact the short format() overload isn't even virtual.
Consistently use LLSDFormatter::EFormatterOptions enum as the options
parameter wherever such options are accepted.
|
|
Use LLStringUtil::getenv() or getoptenv() whenever we fetch a string that will
be used as a pathname.
Use LLFile::tmpdir() instead of getenv("TEMP").
As an added extra-special bonus, finally clean up $TMP/llcontrol-test-zzzzzz
directories that have been accumulating every time we run a local build!
|
|
|
|
These are mostly things that were in fact erroneous, but accepted by older
compilers.
This changeset has not yet been built with Visual Studio 2013 or Linux gcc,
even with -std=c++11.
This changeset has not been built *without* -std=c++11. It should be used in
conjunction with a corresponding change to LL_BUILD_DARWIN_BASE_SWITCHES in
viewer-build-variables/variables.
This is a work in progress. We do not assert that this changeset completes the
work needed to turn on -std=c++11, even on the Mac.
|
|
|
|
|
|
We use boost::phoenix::placeholders::arg1 to imply a whole lambda expression,
replacing boost::lambda. But to bind a plain function in a more
straightforward way, seems classic boost::bind() works while
boost::phoenix::bind() does not.
|
|
https://svn.boost.org/trac/boost/ticket/10864
I've used boost::lambda with boost::function in a number of creative ways over
the years. But the clang 6 shipped with Xcode 6 seems to have somehow broken
lambda + function in Boost 1.57. boost::phoenix is a partial workaround.
Sadly, lambda's comma-operator overload doesn't seem to be supported,
necessitating a couple ugly workarounds.
With real lambdas now supported by current compilers, I'm sure the Boost
community has little incentive to repair the lambda + function problem.
Presumably we'll be able to use such features ourselves Real Soon Now...
|
|
|
|
|
|
|
|
bounces once per second
SH-4346 FIX: Interesting: some integer Statistics are displayed as floating point after crossing region boundary
made llerrs/infos/etc properly variadic wrt tags
LL_INFOS("A", "B", "C") works, for example
fixed unit tests
remove llsimplestat
|
|
|
|
|
|
from this tree
|
|
Using a Params block gives compile-time checking against attribute typos. One
might inadvertently set myLLSD["autofill"] = false and only discover it when
things behave strangely at runtime; but trying to set myParams.autofill will
produce a compile error.
However, it's excellent that the same LLProcess::create() method can accept
either LLProcess::Params or a properly-constructed LLSD block.
|
|
LLProcessLauncher had the somewhat fuzzy mandate of (1) accumulating
parameters with which to launch a child process and (2) sometimes tracking the
lifespan of the ensuing child process. But a valid LLProcessLauncher object
might or might not have ever been associated with an actual child process.
LLProcess specifically tracks a child process. In effect, it's a fairly thin
wrapper around a process HANDLE (on Windows) or pid_t (elsewhere), with
lifespan management thrown in. A static LLProcess::create() method launches a
new child; create() accepts an LLSD bundle with child parameters. So building
up a parameter bundle is deferred to LLSD rather than conflated with the
process management object.
Reconcile all known LLProcessLauncher consumers in the viewer code base,
notably the class unit tests.
|
|
Specifically:
Introduce ManageAPR class in indra/test/manageapr.h. This is useful for a
simple test program without lots of static constructors.
Extract NamedTempFile from llsdserialize_test.cpp to indra/test/
namedtempfile.h. Refactor to use APR file operations rather than platform-
dependent APIs.
Use NamedTempFile for llprocesslauncher_test.cpp.
|
|
|
|
|
|
Instead of low-level open(O_CREAT | O_EXCL) loop on all platforms, use
GetTempFileName() on Windows and mkstemp() elsewhere.
Don't append a final newline to NamedTempFile: use caller's data literally.
Tweak a couple comments.
|
|
|
|
Consider this pathname for llsdserialize_test.cpp:
C:\nats\indra\llcommon\tests\llsdserialize_test.cpp
Embed that in a Python string literal:
'C:\nats\indra\llcommon\tests\llsdserialize_test.cpp'
and you get a string containing:
C:
ats\indra\llcommon ests\llsdserialize_test.cpp
where the \n became a newline and the \t became a tab character.
Hopefully Python raw-string syntax r'C:\etc\etc' works better.
|
|
In this case, the Python code in question is being written from a C++ string
literal to a temp script file in a platform-dependent temp directory -- so the
Python __file__ value tells you nothing about the location of the repository
checkout. Embedding __FILE__ from the containing C++ source file works better.
|
|
And at that point, the Python logic needed to bring in the llsd module is big
enough to warrant capturing it in a separate string variable common to
multiple tests.
|
|
|
|
|
|
|
|
Verify that an LLSD::String containing newlines works; verify that newlines
between items are accepted.
|
|
Write a sequence of LLSDSerialize::toNotation() calls separated by newlines to
a data file, then read lines and parse using llbase.llsd.parse(). Verify that
this produces expected data even when one item is a string containing newlines.
Generalize python() helper function to allow using any of the NamedTempFile
constructor forms.
Allow specifying expected Python rc (default 0) and use this to verify an
intentional sys.exit(17). This is better than previous sys.exit(0) test
because when, at one point, NamedTempFile failed to write file data, running
Python on an empty script file still terminates with rc 0. A nonzero rc
verifies that we've written the file, that Python is running it and that we're
retrieving its rc.
|
|
The only thing about NamedTempScript that was specific to script files was the
hardcoded ".py" extension. Renaming it to NamedTempFile with an explicit
extension argument addresses that.
Allow constructing NamedTempFile with either a std::string, as before, or an
expression of the form (lambda::_1 << some << stuff). If Linden's Boost
package included the Boost.Iostreams lib, we could even stream such an
expression directly to an ostream constructed around the fd. But oh well.
|
|
|
|
Also mollify Linux build, which gets alarmed when you implicitly ignore
write()'s return value. Ignore it explicitly.
|
|
Seems Linden's Boost package and the viewer build might use different
settings of the /Zc:wchar_t switch.
Anyway, this implementation using open(O_CREAT | O_EXCL) should be more
robust. I'm surprised Boost.Filesystem doesn't seem to offer "create a unique
file"; all I found was "generate a random filename fairly likely to be unique."
|
|
|
|
On Windows, calling boost::filesystem::path::string() implicitly requests
code conversion between std::wstring (the boost::filesystem::path::string_type
selected on Windows) and std::string. At least for integration-test program,
that produces link errors. Use Linden's wstring_to_utf8str() instead.
|
|
|
|
|
|
It's wonderful that the Python interpreter will accept a whole multi-line
script as a composite -c argument... but because Windows command-line
processing is fundamentally flawed, we simply can't count on it for Windows.
Instead, accept script text, write a temporary script file in a system-
dependent temp directory, ask Python to run that script and delete the file.
Also, on Windows, use _spawnl(), much simpler than adding bizarre Windows wait
logic to LLProcessLauncher. Use LLProcessLauncher only on Mac & Linux, with
waitpid() to capture rc.
|
|
|
|
|
|
This is in its infancy; tested on Mac; needs to be ironed out on Windows and
Linux. Goal is to test at least some cross-language LLSD serialization.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* turn llnamevalue_tut into a llmessage unit test
* turn llsdserialize_tut into a llcommon integration test
* re-enable the (quite slow) llsdserialize test on win32 now that it doesn't have to run on every recompile
* re-enable all llmessage unit tests on linux viewer builds
|
