diff options
Diffstat (limited to 'indra')
| -rw-r--r-- | indra/cmake/LLAddBuildTest.cmake | 283 | ||||
| -rw-r--r-- | indra/cmake/LLMath.cmake | 5 | ||||
| -rw-r--r-- | indra/integration_tests/llimage_libtest/CMakeLists.txt | 10 | ||||
| -rw-r--r-- | indra/integration_tests/llui_libtest/CMakeLists.txt | 17 | ||||
| -rw-r--r-- | indra/llcorehttp/CMakeLists.txt | 9 | ||||
| -rw-r--r-- | indra/llmessage/CMakeLists.txt | 2 | ||||
| -rw-r--r-- | indra/newview/CMakeLists.txt | 2 |
7 files changed, 148 insertions, 180 deletions
diff --git a/indra/cmake/LLAddBuildTest.cmake b/indra/cmake/LLAddBuildTest.cmake index fa95e08dcd..408280f0cc 100644 --- a/indra/cmake/LLAddBuildTest.cmake +++ b/indra/cmake/LLAddBuildTest.cmake @@ -19,89 +19,88 @@ MACRO(LL_ADD_PROJECT_UNIT_TESTS project sources) # # More info and examples at: https://wiki.secondlife.com/wiki/How_to_add_unit_tests_to_indra_code # - # WARNING: do NOT modify this code without working with poppy - + # WARNING: do NOT modify this code without working with poppy - (2022-09-17: ND, I did not talk to poppy, are we all doomed now?) # there is another branch that will conflict heavily with any changes here. -INCLUDE(GoogleMock) - IF(LL_TEST_VERBOSE) - MESSAGE("LL_ADD_PROJECT_UNIT_TESTS UNITTEST_PROJECT_${project} sources: ${sources}") - ENDIF(LL_TEST_VERBOSE) + # This here looks weird, but is needed. It will inject GoogleMock into projects that forgot to include `this` (LLAddBuildTest.cmake) + # But through some other means have access to this macro + include(GoogleMock) + + if(LL_TEST_VERBOSE) + message("LL_ADD_PROJECT_UNIT_TESTS UNITTEST_PROJECT_${project} sources: ${sources}") + endif() # Start with the header and project-wide setup before making targets #project(UNITTEST_PROJECT_${project}) # Setup includes, paths, etc - SET(alltest_SOURCE_FILES - ${CMAKE_SOURCE_DIR}/test/test.cpp - ${CMAKE_SOURCE_DIR}/test/lltut.cpp - ) - SET(alltest_DEP_TARGETS - # needed by the test harness itself - llcommon - ) - - SET(alltest_INCLUDE_DIRS - ${LIBS_OPEN_DIR}/test + set(alltest_SOURCE_FILES + ${CMAKE_SOURCE_DIR}/test/test.cpp + ${CMAKE_SOURCE_DIR}/test/lltut.cpp ) - SET(alltest_LIBRARIES + set(alltest_DEP_TARGETS + # needed by the test harness itself + llcommon + ) + + set(alltest_LIBRARIES llcommon ll::googlemock ) - IF(NOT "${project}" STREQUAL "llmath") + if(NOT "${project}" STREQUAL "llmath") # add llmath as a dep unless the tested module *is* llmath! - LIST(APPEND alltest_DEP_TARGETS - llmath - ) - LIST(APPEND alltest_LIBRARIES - llmath - ) - ENDIF(NOT "${project}" STREQUAL "llmath") + list(APPEND alltest_DEP_TARGETS llmath) + list(APPEND alltest_LIBRARIES llmath ) + endif() # Headers, for convenience in targets. - SET(alltest_HEADER_FILES - ${CMAKE_SOURCE_DIR}/test/test.h - ) + set(alltest_HEADER_FILES ${CMAKE_SOURCE_DIR}/test/test.h) # start the source test executable definitions - SET(${project}_TEST_OUTPUT "") - FOREACH (source ${sources}) - STRING( REGEX REPLACE "(.*)\\.[^.]+$" "\\1" name ${source} ) - STRING( REGEX REPLACE ".*\\.([^.]+)$" "\\1" extension ${source} ) - IF(LL_TEST_VERBOSE) - MESSAGE("LL_ADD_PROJECT_UNIT_TESTS UNITTEST_PROJECT_${project} individual source: ${source} (${name}.${extension})") - ENDIF(LL_TEST_VERBOSE) + set(${project}_TEST_OUTPUT "") + foreach (source ${sources}) + string( REGEX REPLACE "(.*)\\.[^.]+$" "\\1" name ${source} ) + string( REGEX REPLACE ".*\\.([^.]+)$" "\\1" extension ${source} ) + if(LL_TEST_VERBOSE) + message("LL_ADD_PROJECT_UNIT_TESTS UNITTEST_PROJECT_${project} individual source: ${source} (${name}.${extension})") + endif() # # Per-codefile additional / external source, header, and include dir property extraction # # Source GET_OPT_SOURCE_FILE_PROPERTY(${name}_test_additional_SOURCE_FILES ${source} LL_TEST_ADDITIONAL_SOURCE_FILES) - SET(${name}_test_SOURCE_FILES - ${source} - tests/${name}_test.${extension} - ${alltest_SOURCE_FILES} - ${${name}_test_additional_SOURCE_FILES} ) - IF(LL_TEST_VERBOSE) - MESSAGE("LL_ADD_PROJECT_UNIT_TESTS ${name}_test_SOURCE_FILES ${${name}_test_SOURCE_FILES}") - ENDIF(LL_TEST_VERBOSE) + set(${name}_test_SOURCE_FILES + ${source} + tests/${name}_test.${extension} + ${alltest_SOURCE_FILES} + ${${name}_test_additional_SOURCE_FILES} ) + if(LL_TEST_VERBOSE) + message("LL_ADD_PROJECT_UNIT_TESTS ${name}_test_SOURCE_FILES ${${name}_test_SOURCE_FILES}") + endif() # Headers GET_OPT_SOURCE_FILE_PROPERTY(${name}_test_additional_HEADER_FILES ${source} LL_TEST_ADDITIONAL_HEADER_FILES) - SET(${name}_test_HEADER_FILES ${name}.h ${${name}_test_additional_HEADER_FILES}) - LIST(APPEND ${name}_test_SOURCE_FILES ${${name}_test_HEADER_FILES}) - IF(LL_TEST_VERBOSE) - MESSAGE("LL_ADD_PROJECT_UNIT_TESTS ${name}_test_HEADER_FILES ${${name}_test_HEADER_FILES}") - ENDIF(LL_TEST_VERBOSE) - # Include dirs + set(${name}_test_HEADER_FILES ${name}.h ${${name}_test_additional_HEADER_FILES}) + list(APPEND ${name}_test_SOURCE_FILES ${${name}_test_HEADER_FILES}) + if(LL_TEST_VERBOSE) + message("LL_ADD_PROJECT_UNIT_TESTS ${name}_test_HEADER_FILES ${${name}_test_HEADER_FILES}") + endif() + + # Setup target + add_executable(PROJECT_${project}_TEST_${name} ${${name}_test_SOURCE_FILES}) + + # Cannot declare a dependency on ${project} because the executable create above will later declare + # add_dependencies( ${project} ${project}_tests) + # as such grab ${project}'s interface include dirs and inject them here + get_property( ${name}_test_additional_INCLUDE_DIRS TARGET ${project} PROPERTY INTERFACE_INCLUDE_DIRECTORIES ) + target_include_directories (PROJECT_${project}_TEST_${name} PRIVATE ${${name}_test_additional_INCLUDE_DIRS} ) + GET_OPT_SOURCE_FILE_PROPERTY(${name}_test_additional_INCLUDE_DIRS ${source} LL_TEST_ADDITIONAL_INCLUDE_DIRS) - INCLUDE_DIRECTORIES(${alltest_INCLUDE_DIRS} ${${name}_test_additional_INCLUDE_DIRS} ) - IF(LL_TEST_VERBOSE) - MESSAGE("LL_ADD_PROJECT_UNIT_TESTS ${name}_test_additional_INCLUDE_DIRS ${${name}_test_additional_INCLUDE_DIRS}") - ENDIF(LL_TEST_VERBOSE) + target_include_directories (PROJECT_${project}_TEST_${name} PRIVATE ${${name}_test_additional_INCLUDE_DIRS} ) + target_include_directories (PROJECT_${project}_TEST_${name} PRIVATE ${LIBS_OPEN_DIR}/test ) - # Setup target - ADD_EXECUTABLE(PROJECT_${project}_TEST_${name} ${${name}_test_SOURCE_FILES}) - SET_TARGET_PROPERTIES(PROJECT_${project}_TEST_${name} PROPERTIES RUNTIME_OUTPUT_DIRECTORY "${EXE_STAGING_DIR}") + set_target_properties(PROJECT_${project}_TEST_${name} PROPERTIES RUNTIME_OUTPUT_DIRECTORY "${EXE_STAGING_DIR}") # # Per-codefile additional / external project dep and lib dep property extraction @@ -111,92 +110,95 @@ INCLUDE(GoogleMock) GET_OPT_SOURCE_FILE_PROPERTY(${name}_test_additional_PROJECTS ${source} LL_TEST_ADDITIONAL_PROJECTS) # Libraries GET_OPT_SOURCE_FILE_PROPERTY(${name}_test_additional_LIBRARIES ${source} LL_TEST_ADDITIONAL_LIBRARIES) - IF(LL_TEST_VERBOSE) - MESSAGE("LL_ADD_PROJECT_UNIT_TESTS ${name}_test_additional_PROJECTS ${${name}_test_additional_PROJECTS}") - MESSAGE("LL_ADD_PROJECT_UNIT_TESTS ${name}_test_additional_LIBRARIES ${${name}_test_additional_LIBRARIES}") - ENDIF(LL_TEST_VERBOSE) + + if(LL_TEST_VERBOSE) + message("LL_ADD_PROJECT_UNIT_TESTS ${name}_test_additional_PROJECTS ${${name}_test_additional_PROJECTS}") + message("LL_ADD_PROJECT_UNIT_TESTS ${name}_test_additional_LIBRARIES ${${name}_test_additional_LIBRARIES}") + endif() + # Add to project - TARGET_LINK_LIBRARIES(PROJECT_${project}_TEST_${name} ${alltest_LIBRARIES} ${${name}_test_additional_PROJECTS} ${${name}_test_additional_LIBRARIES} ) + target_link_libraries(PROJECT_${project}_TEST_${name} ${alltest_LIBRARIES} ${${name}_test_additional_PROJECTS} ${${name}_test_additional_LIBRARIES} ) add_dependencies( PROJECT_${project}_TEST_${name} ${alltest_DEP_TARGETS}) # Compile-time Definitions GET_OPT_SOURCE_FILE_PROPERTY(${name}_test_additional_CFLAGS ${source} LL_TEST_ADDITIONAL_CFLAGS) - SET_TARGET_PROPERTIES(PROJECT_${project}_TEST_${name} - PROPERTIES - COMPILE_FLAGS "${${name}_test_additional_CFLAGS}" - COMPILE_DEFINITIONS "LL_TEST=${name};LL_TEST_${name}") - IF(LL_TEST_VERBOSE) - MESSAGE("LL_ADD_PROJECT_UNIT_TESTS ${name}_test_additional_CFLAGS ${${name}_test_additional_CFLAGS}") - ENDIF(LL_TEST_VERBOSE) - + set_target_properties(PROJECT_${project}_TEST_${name} + PROPERTIES + COMPILE_FLAGS "${${name}_test_additional_CFLAGS}" + COMPILE_DEFINITIONS "LL_TEST=${name};LL_TEST_${name}") + if(LL_TEST_VERBOSE) + message("LL_ADD_PROJECT_UNIT_TESTS ${name}_test_additional_CFLAGS ${${name}_test_additional_CFLAGS}") + endif() + # # Setup test targets # - SET(TEST_EXE $<TARGET_FILE:PROJECT_${project}_TEST_${name}>) - SET(TEST_OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/PROJECT_${project}_TEST_${name}_ok.txt) - SET(TEST_CMD ${TEST_EXE} --touch=${TEST_OUTPUT} --sourcedir=${CMAKE_CURRENT_SOURCE_DIR}) + set(TEST_EXE $<TARGET_FILE:PROJECT_${project}_TEST_${name}>) + set(TEST_OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/PROJECT_${project}_TEST_${name}_ok.txt) + set(TEST_CMD ${TEST_EXE} --touch=${TEST_OUTPUT} --sourcedir=${CMAKE_CURRENT_SOURCE_DIR}) # daveh - what configuration does this use? Debug? it's cmake-time, not build time. + poppy 2009-04-19 - IF(LL_TEST_VERBOSE) - MESSAGE(STATUS "LL_ADD_PROJECT_UNIT_TESTS ${name} test_cmd = ${TEST_CMD}") - ENDIF(LL_TEST_VERBOSE) + if(LL_TEST_VERBOSE) + message(STATUS "LL_ADD_PROJECT_UNIT_TESTS ${name} test_cmd = ${TEST_CMD}") + endif() SET_TEST_PATH(LD_LIBRARY_PATH) LL_TEST_COMMAND(TEST_SCRIPT_CMD "${LD_LIBRARY_PATH}" ${TEST_CMD}) - IF(LL_TEST_VERBOSE) - MESSAGE(STATUS "LL_ADD_PROJECT_UNIT_TESTS ${name} test_script = ${TEST_SCRIPT_CMD}") - ENDIF(LL_TEST_VERBOSE) - # Add test - ADD_CUSTOM_COMMAND( - OUTPUT ${TEST_OUTPUT} - COMMAND ${TEST_SCRIPT_CMD} - DEPENDS PROJECT_${project}_TEST_${name} - WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} - ) + if(LL_TEST_VERBOSE) + message(STATUS "LL_ADD_PROJECT_UNIT_TESTS ${name} test_script = ${TEST_SCRIPT_CMD}") + endif() + + # Add test + add_custom_command( + OUTPUT ${TEST_OUTPUT} + COMMAND ${TEST_SCRIPT_CMD} + DEPENDS PROJECT_${project}_TEST_${name} + WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR} + ) # Why not add custom target and add POST_BUILD command? # Slightly less uncertain behavior # (OUTPUT commands run non-deterministically AFAIK) + poppy 2009-04-19 - # > I did not use a post build step as I could not make it notify of a + # > I did not use a post build step as I could not make it notify of a # > failure after the first time you build and fail a test. - daveh 2009-04-20 - LIST(APPEND ${project}_TEST_OUTPUT ${TEST_OUTPUT}) - ENDFOREACH (source) + list(APPEND ${project}_TEST_OUTPUT ${TEST_OUTPUT}) + endforeach (source) # Add the test runner target per-project # (replaces old _test_ok targets all over the place) - ADD_CUSTOM_TARGET(${project}_tests ALL DEPENDS ${${project}_TEST_OUTPUT}) - ADD_DEPENDENCIES(${project} ${project}_tests) + add_custom_target(${project}_tests ALL DEPENDS ${${project}_TEST_OUTPUT}) + add_dependencies(${project} ${project}_tests) ENDMACRO(LL_ADD_PROJECT_UNIT_TESTS) #***************************************************************************** # GET_OPT_SOURCE_FILE_PROPERTY #***************************************************************************** MACRO(GET_OPT_SOURCE_FILE_PROPERTY var filename property) - GET_SOURCE_FILE_PROPERTY(${var} "${filename}" "${property}") - IF("${${var}}" MATCHES NOTFOUND) - SET(${var} "") - ENDIF("${${var}}" MATCHES NOTFOUND) + get_source_file_property(${var} "${filename}" "${property}") + if("${${var}}" MATCHES NOTFOUND) + set(${var} "") + endif() ENDMACRO(GET_OPT_SOURCE_FILE_PROPERTY) #***************************************************************************** # LL_ADD_INTEGRATION_TEST #***************************************************************************** -FUNCTION(LL_ADD_INTEGRATION_TEST - testname - additional_source_files - library_dependencies -# variable args - ) +FUNCTION(LL_ADD_INTEGRATION_TEST + testname + additional_source_files + library_dependencies + # variable args + ) if(TEST_DEBUG) message(STATUS "Adding INTEGRATION_TEST_${testname} - debug output is on") - endif(TEST_DEBUG) + endif() - SET(source_files - tests/${testname}_test.cpp - ${CMAKE_SOURCE_DIR}/test/test.cpp - ${CMAKE_SOURCE_DIR}/test/lltut.cpp - ${additional_source_files} - ) + set(source_files + tests/${testname}_test.cpp + ${CMAKE_SOURCE_DIR}/test/test.cpp + ${CMAKE_SOURCE_DIR}/test/lltut.cpp + ${additional_source_files} + ) - SET(libraries + set(libraries ${library_dependencies} ll::googlemock ) @@ -204,36 +206,37 @@ FUNCTION(LL_ADD_INTEGRATION_TEST # Add test executable build target if(TEST_DEBUG) message(STATUS "ADD_EXECUTABLE(INTEGRATION_TEST_${testname} ${source_files})") - endif(TEST_DEBUG) - ADD_EXECUTABLE(INTEGRATION_TEST_${testname} ${source_files}) - SET_TARGET_PROPERTIES(INTEGRATION_TEST_${testname} - PROPERTIES - RUNTIME_OUTPUT_DIRECTORY "${EXE_STAGING_DIR}" - COMPILE_DEFINITIONS "LL_TEST=${testname};LL_TEST_${testname}" - ) + endif() + + add_executable(INTEGRATION_TEST_${testname} ${source_files}) + set_target_properties(INTEGRATION_TEST_${testname} + PROPERTIES + RUNTIME_OUTPUT_DIRECTORY "${EXE_STAGING_DIR}" + COMPILE_DEFINITIONS "LL_TEST=${testname};LL_TEST_${testname}" + ) - # The following was copied to llcorehttp/CMakeLists.txt's texture_load target. + # The following was copied to llcorehttp/CMakeLists.txt's texture_load target. # Any changes made here should be replicated there. if (WINDOWS) - SET_TARGET_PROPERTIES(INTEGRATION_TEST_${testname} - PROPERTIES - LINK_FLAGS "/debug /NODEFAULTLIB:LIBCMT /SUBSYSTEM:CONSOLE" - LINK_FLAGS_DEBUG "/NODEFAULTLIB:\"LIBCMT;LIBCMTD;MSVCRT\" /INCREMENTAL:NO" - LINK_FLAGS_RELEASE "" - ) - endif (WINDOWS) + set_target_properties(INTEGRATION_TEST_${testname} + PROPERTIES + LINK_FLAGS "/debug /NODEFAULTLIB:LIBCMT /SUBSYSTEM:CONSOLE" + ) + endif () # Add link deps to the executable if(TEST_DEBUG) message(STATUS "TARGET_LINK_LIBRARIES(INTEGRATION_TEST_${testname} ${libraries})") - endif(TEST_DEBUG) - TARGET_LINK_LIBRARIES(INTEGRATION_TEST_${testname} ${libraries}) + endif() + + target_link_libraries(INTEGRATION_TEST_${testname} ${libraries}) + target_include_directories (INTEGRATION_TEST_${testname} PRIVATE ${LIBS_OPEN_DIR}/test ) # Create the test running command - SET(test_command ${ARGN}) - SET(TEST_EXE $<TARGET_FILE:INTEGRATION_TEST_${testname}>) - LIST(FIND test_command "{}" test_exe_pos) - IF(test_exe_pos LESS 0) + set(test_command ${ARGN}) + set(TEST_EXE $<TARGET_FILE:INTEGRATION_TEST_${testname}>) + list(FIND test_command "{}" test_exe_pos) + if(test_exe_pos LESS 0) # The {} marker means "the full pathname of the test executable." # test_exe_pos -1 means we didn't find it -- so append the test executable # name to $ARGN, the variable part of the arg list. This is convenient @@ -242,26 +245,26 @@ FUNCTION(LL_ADD_INTEGRATION_TEST # pathname of the test program as the last of its args. You need specify # {} only if the test program's pathname isn't the last argument in the # desired command line. - LIST(APPEND test_command "${TEST_EXE}") - ELSE (test_exe_pos LESS 0) + list(APPEND test_command "${TEST_EXE}") + else (test_exe_pos LESS 0) # Found {} marker at test_exe_pos. Remove the {}... - LIST(REMOVE_AT test_command test_exe_pos) + list(REMOVE_AT test_command test_exe_pos) # ...and replace it with the actual name of the test executable. - LIST(INSERT test_command test_exe_pos "${TEST_EXE}") - ENDIF (test_exe_pos LESS 0) + list(INSERT test_command test_exe_pos "${TEST_EXE}") + endif() SET_TEST_PATH(LD_LIBRARY_PATH) LL_TEST_COMMAND(TEST_SCRIPT_CMD "${LD_LIBRARY_PATH}" ${test_command}) if(TEST_DEBUG) message(STATUS "TEST_SCRIPT_CMD: ${TEST_SCRIPT_CMD}") - endif(TEST_DEBUG) + endif() - ADD_CUSTOM_COMMAND( - TARGET INTEGRATION_TEST_${testname} - POST_BUILD - COMMAND ${TEST_SCRIPT_CMD} - ) + add_custom_command( + TARGET INTEGRATION_TEST_${testname} + POST_BUILD + COMMAND ${TEST_SCRIPT_CMD} + ) # Use CTEST? Not sure how to yet... # ADD_TEST(INTEGRATION_TEST_RUNNER_${testname} ${TEST_SCRIPT_CMD}) diff --git a/indra/cmake/LLMath.cmake b/indra/cmake/LLMath.cmake index 893920ae6f..a707c75bc4 100644 --- a/indra/cmake/LLMath.cmake +++ b/indra/cmake/LLMath.cmake @@ -1,7 +1,2 @@ # -*- cmake -*- -set(LLMATH_INCLUDE_DIRS - ${LIBS_OPEN_DIR}/llmath - ) - -set(LLMATH_LIBRARIES llmath) diff --git a/indra/integration_tests/llimage_libtest/CMakeLists.txt b/indra/integration_tests/llimage_libtest/CMakeLists.txt index cf43292922..ee2890778b 100644 --- a/indra/integration_tests/llimage_libtest/CMakeLists.txt +++ b/indra/integration_tests/llimage_libtest/CMakeLists.txt @@ -12,16 +12,6 @@ include(LLImageJ2COJ) include(LLKDU) include(LLFileSystem) -include_directories( - ${LLCOMMON_INCLUDE_DIRS} - ${LLFILESYSTEM_INCLUDE_DIRS} - ${LLIMAGE_INCLUDE_DIRS} - ${LLMATH_INCLUDE_DIRS} - ) -include_directories(SYSTEM - ${LLCOMMON_SYSTEM_INCLUDE_DIRS} - ) - set(llimage_libtest_SOURCE_FILES llimage_libtest.cpp ) diff --git a/indra/integration_tests/llui_libtest/CMakeLists.txt b/indra/integration_tests/llui_libtest/CMakeLists.txt index 849eda1acf..a6ce657f4f 100644 --- a/indra/integration_tests/llui_libtest/CMakeLists.txt +++ b/indra/integration_tests/llui_libtest/CMakeLists.txt @@ -22,23 +22,6 @@ include(Hunspell) include(Linking) # include(Tut) -include_directories( - ${FREETYPE_INCLUDE_DIRS} - ${LLCOMMON_INCLUDE_DIRS} - ${LLIMAGE_INCLUDE_DIRS} - ${LLMATH_INCLUDE_DIRS} - ${LLRENDER_INCLUDE_DIRS} - ${LLUI_INCLUDE_DIRS} - ${LLFILESYSTEM_INCLUDE_DIRS} - ${LLWINDOW_INCLUDE_DIRS} - ${LLXML_INCLUDE_DIRS} - ${LIBS_PREBUILD_DIR}/include/hunspell - ) -include_directories(SYSTEM - ${LLCOMMON_SYSTEM_INCLUDE_DIRS} - ${LLXML_SYSTEM_INCLUDE_DIRS} - ) - set(llui_libtest_SOURCE_FILES llui_libtest.cpp llwidgetreg.cpp diff --git a/indra/llcorehttp/CMakeLists.txt b/indra/llcorehttp/CMakeLists.txt index 08139910d3..87796abd3c 100644 --- a/indra/llcorehttp/CMakeLists.txt +++ b/indra/llcorehttp/CMakeLists.txt @@ -14,8 +14,6 @@ include(LLCommon) include(Tut) include(bugsplat) -include_directories (${CMAKE_CURRENT_SOURCE_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/../llmessage ) - set(llcorehttp_SOURCE_FILES bufferarray.cpp bufferstream.cpp @@ -89,8 +87,11 @@ target_link_libraries( ll::openssl ll::nghttp2 ) -target_include_directories( llcorehttp INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}) - +target_include_directories( llcorehttp INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}) +# llmessage depends on llcorehttp, yet llcorehttp also depends on llmessage (at least for includes). +# Cannot/Should not use target_link_libraries here to add llmessage to the dependencies, as that would +# lead to circular dependencies (or in case of cmake, the first project declaring it's dependencies wins) +target_include_directories( llcorehttp PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/../llmessage) # tests set(LLCOREHTTP_TESTS ON CACHE BOOL diff --git a/indra/llmessage/CMakeLists.txt b/indra/llmessage/CMakeLists.txt index 7340752fb2..4786956e85 100644 --- a/indra/llmessage/CMakeLists.txt +++ b/indra/llmessage/CMakeLists.txt @@ -13,8 +13,6 @@ include(Tut) include(Python) include(JsonCpp) -include_directories (${CMAKE_CURRENT_SOURCE_DIR}) - set(llmessage_SOURCE_FILES llassetstorage.cpp llavatarname.cpp diff --git a/indra/newview/CMakeLists.txt b/indra/newview/CMakeLists.txt index 74faf3d1b6..eef7ee8aae 100644 --- a/indra/newview/CMakeLists.txt +++ b/indra/newview/CMakeLists.txt @@ -47,8 +47,6 @@ include(ZLIBNG) include(URIPARSER) include(LLPrimitive) -include_directories( ${CMAKE_CURRENT_SOURCE_DIR} ) - if (NOT HAVOK_TPV) # When using HAVOK_TPV, the library is precompiled, so no need for this |