diff options
Diffstat (limited to 'indra/newview')
36 files changed, 564 insertions, 320 deletions
diff --git a/indra/newview/app_settings/cmd_line.xml b/indra/newview/app_settings/cmd_line.xml index 7ab7787d77..74117dbd85 100755 --- a/indra/newview/app_settings/cmd_line.xml +++ b/indra/newview/app_settings/cmd_line.xml @@ -22,7 +22,8 @@ <map> <key>count</key> <integer>1</integer> - <!-- Special case. Not mapped to a setting. --> + <key>map-to</key> + <string>CmdLineChannel</string> </map> <key>console</key> @@ -96,6 +97,8 @@ 0 - low, 1 - medium, 2 - high, 3 - ultra</string> <key>count</key> <integer>1</integer> + <key>map-to</key> + <string>RenderQualityPerformance</string> </map> <key>grid</key> @@ -370,7 +373,8 @@ <boolean>true</boolean> <key>last_option</key> <boolean>true</boolean> - <!-- Special case. Not mapped to a setting. --> + <key>map-to</key> + <string>CmdLineLoginLocation</string> </map> <key>url</key> @@ -381,7 +385,8 @@ <integer>1</integer> <key>last_option</key> <boolean>true</boolean> - <!-- Special case. Not mapped to a setting. --> + <key>map-to</key> + <string>CmdLineLoginLocation</string> </map> <key>usersessionsettings</key> diff --git a/indra/newview/app_settings/settings.xml b/indra/newview/app_settings/settings.xml index 344079b640..4c8860ffe7 100755 --- a/indra/newview/app_settings/settings.xml +++ b/indra/newview/app_settings/settings.xml @@ -126,6 +126,17 @@ <key>Value</key> <integer>1</integer> </map> + <key>AnalyzePerformance</key> + <map> + <key>Comment</key> + <string>Request performance analysis for a particular viewer run</string> + <key>Persist</key> + <integer>0</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>0</integer> + </map> <key>AnimateTextures</key> <map> <key>Comment</key> @@ -1738,6 +1749,17 @@ <key>Value</key> <integer>0</integer> </map> + <key>CmdLineChannel</key> + <map> + <key>Comment</key> + <string>Command line specified channel name</string> + <key>Persist</key> + <integer>0</integer> + <key>Type</key> + <string>String</string> + <key>Value</key> + <string /> + </map> <key>CmdLineDisableVoice</key> <map> <key>Comment</key> @@ -1784,6 +1806,17 @@ <string /> </array> </map> + <key>CmdLineLoginLocation</key> + <map> + <key>Comment</key> + <string>Startup destination requested on command line</string> + <key>Persist</key> + <integer>0</integer> + <key>Type</key> + <string>String</string> + <key>Value</key> + <string/> + </map> <key>ConnectAsGod</key> <map> <key>Comment</key> @@ -1916,6 +1949,17 @@ <key>Value</key> <integer>262144</integer> </map> + <key>CrashOnStartup</key> + <map> + <key>Comment</key> + <string>User-requested crash on viewer startup</string> + <key>Persist</key> + <integer>0</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>0</integer> + </map> <key>CreateToolCopyCenters</key> <map> <key>Comment</key> @@ -2158,6 +2202,17 @@ <key>Value</key> <integer>0</integer> </map> + <key>DebugSession</key> + <map> + <key>Comment</key> + <string>Request debugging for a particular viewer session</string> + <key>Persist</key> + <integer>0</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>0</integer> + </map> <key>DebugShowColor</key> <map> <key>Comment</key> @@ -2972,6 +3027,17 @@ <key>Value</key> <integer>0</integer> </map> + <key>DisableCrashLogger</key> + <map> + <key>Comment</key> + <string>Do not send crash report to Linden server</string> + <key>Persist</key> + <integer>0</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>0</integer> + </map> <key>DisableMouseWarp</key> <map> <key>Comment</key> @@ -5217,6 +5283,28 @@ <key>Value</key> <integer>0</integer> </map> + <key>LogMetrics</key> + <map> + <key>Comment</key> + <string>Log viewer metrics</string> + <key>Persist</key> + <integer>0</integer> + <key>Type</key> + <string>String</string> + <key>Value</key> + <string/> + </map> + <key>LogPerformance</key> + <map> + <key>Comment</key> + <string>Log performance analysis for a particular viewer run</string> + <key>Persist</key> + <integer>0</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>0</integer> + </map> <key>LogTextureNetworkTraffic</key> <map> <key>Comment</key> @@ -6394,6 +6482,17 @@ <key>Value</key> <integer>0</integer> </map> + <key>NoQuickTime</key> + <map> + <key>Comment</key> + <string>Disable QuickTime for a particular viewer run</string> + <key>Persist</key> + <integer>0</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>0</integer> + </map> <key>NoVerifySSLCert</key> <map> <key>Comment</key> @@ -9642,6 +9741,17 @@ <key>Value</key> <integer>1</integer> </map> + <key>ReplaySession</key> + <map> + <key>Comment</key> + <string>Request replay of previously-recorded pilot file</string> + <key>Persist</key> + <integer>0</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>0</integer> + </map> <key>RotateRight</key> <map> <key>Comment</key> @@ -12858,12 +12968,13 @@ <key>UserLoginInfo</key> <map> <key>Comment</key> - <string>Users loging data.</string> + <string>User login data.</string> <key>Persist</key> <integer>1</integer> <key>Type</key> <string>LLSD</string> <key>Value</key> + <string/> </map> <key>VFSOldSize</key> <map> diff --git a/indra/newview/app_settings/settings_files.xml b/indra/newview/app_settings/settings_files.xml index bfc09286e3..4a9e522a96 100755 --- a/indra/newview/app_settings/settings_files.xml +++ b/indra/newview/app_settings/settings_files.xml @@ -4,6 +4,9 @@ <file name="Global" file_name="settings.xml" required="true"/> + <file name="Global" + file_name="settings_install.xml" + required="false"/> <file name="PerAccount" file_name="settings_per_account.xml" required="true"/> diff --git a/indra/newview/linux_tools/wrapper.sh b/indra/newview/linux_tools/wrapper.sh index d8440eebf1..c23401d5a6 100755 --- a/indra/newview/linux_tools/wrapper.sh +++ b/indra/newview/linux_tools/wrapper.sh @@ -121,37 +121,21 @@ export SAVED_LD_LIBRARY_PATH="${LD_LIBRARY_PATH}" export LD_LIBRARY_PATH="$PWD/lib:${LD_LIBRARY_PATH}" -# Have to deal specially with gridargs.dat; typical contents look like: -# --channel "Second Life Test" --settings settings_test.xml -# Simply embedding $(<etc/gridargs.dat) into a command line treats each of -# Second, Life and Developer as separate args -- no good. We need bash to -# process quotes using eval. -# First, check if we have been instructed to skip reading in gridargs.dat: -skip_gridargs=false -argnum=0 +# Copy "$@" to ARGS array specifically to delete the --skip-gridargs switch. +# The gridargs.dat file is no more, but we still want to avoid breaking +# scripts that invoke this one with --skip-gridargs. +ARGS=() for ARG in "$@"; do - if [ "--skip-gridargs" == "$ARG" ]; then - skip_gridargs=true - else - ARGS[$argnum]="$ARG" - argnum=$(($argnum+1)) + if [ "--skip-gridargs" != "$ARG" ]; then + ARGS[${#ARGS[*]}]="$ARG" fi done -# Second, read it without scanning, then scan that string. Break quoted words -# into a bash array. Note that if gridargs.dat is empty, or contains only -# whitespace, the resulting gridargs array will be empty -- zero entries -- -# therefore "${gridargs[@]}" entirely vanishes from the command line below, -# just as we want. -if ! $skip_gridargs ; then - eval gridargs=("$(<etc/gridargs.dat)") -fi - # Run the program. # Don't quote $LL_WRAPPER because, if empty, it should simply vanish from the -# command line. But DO quote "$@": preserve separate args as individually -# quoted. Similar remarks about the contents of gridargs. -$LL_WRAPPER bin/do-not-directly-run-secondlife-bin "${gridargs[@]}" "${ARGS[@]}" +# command line. But DO quote "${ARGS[@]}": preserve separate args as +# individually quoted. +$LL_WRAPPER bin/do-not-directly-run-secondlife-bin "${ARGS[@]}" LL_RUN_ERR=$? # Handle any resulting errors diff --git a/indra/newview/llagent.cpp b/indra/newview/llagent.cpp index 3e94c5edf7..05f3824485 100755 --- a/indra/newview/llagent.cpp +++ b/indra/newview/llagent.cpp @@ -433,7 +433,7 @@ void LLAgent::init() { mMoveTimer.start(); - gSavedSettings.declareBOOL("SlowMotionAnimation", FALSE, "Declared in code", FALSE); + gSavedSettings.declareBOOL("SlowMotionAnimation", FALSE, "Declared in code", LLControlVariable::PERSIST_NO); gSavedSettings.getControl("SlowMotionAnimation")->getSignal()->connect(boost::bind(&handleSlowMotionAnimation, _2)); // *Note: this is where LLViewerCamera::getInstance() used to be constructed. diff --git a/indra/newview/llappviewer.cpp b/indra/newview/llappviewer.cpp index f92274dbbd..b2aadf9cc0 100755 --- a/indra/newview/llappviewer.cpp +++ b/indra/newview/llappviewer.cpp @@ -668,7 +668,6 @@ LLAppViewer::LLAppViewer() : mSecondInstance(false), mSavedFinalSnapshot(false), mSavePerAccountSettings(false), // don't save settings on logout unless login succeeded. - mForceGraphicsDetail(false), mQuitRequested(false), mLogoutRequestSent(false), mYieldTime(-1), @@ -2307,17 +2306,24 @@ void LLAppViewer::loadColorSettings() LLUIColorTable::instance().loadFromSettings(); } +namespace +{ + void handleCommandLineError(LLControlGroupCLP& clp) + { + llwarns << "Error parsing command line options. Command Line options ignored." << llendl; + + llinfos << "Command line usage:\n" << clp << llendl; + + OSMessageBox(STRINGIZE(LLTrans::getString("MBCmdLineError") << clp.getErrorMessage()), + LLStringUtil::null, + OSMB_OK); + } +} // anonymous namespace + bool LLAppViewer::initConfiguration() { //Load settings files list std::string settings_file_list = gDirUtilp->getExpandedFilename(LL_PATH_APP_SETTINGS, "settings_files.xml"); - //LLControlGroup settings_control("SettingsFiles"); - //llinfos << "Loading settings file list " << settings_file_list << llendl; - //if (0 == settings_control.loadFromFile(settings_file_list)) - //{ - // llerrs << "Cannot load default configuration file " << settings_file_list << llendl; - //} - LLXMLNodePtr root; BOOL success = LLXMLNode::parseFile(settings_file_list, root, NULL); if (!success) @@ -2376,9 +2382,7 @@ bool LLAppViewer::initConfiguration() { c->setValue(true, false); } -#endif -#ifndef LL_RELEASE_FOR_DOWNLOAD gSavedSettings.setBOOL("QAMode", TRUE ); gSavedSettings.setS32("WatchdogEnabled", 0); #endif @@ -2414,13 +2418,7 @@ bool LLAppViewer::initConfiguration() if(!initParseCommandLine(clp)) { - llwarns << "Error parsing command line options. Command Line options ignored." << llendl; - - llinfos << "Command line usage:\n" << clp << llendl; - - std::ostringstream msg; - msg << LLTrans::getString("MBCmdLineError") << clp.getErrorMessage(); - OSMessageBox(msg.str(),LLStringUtil::null,OSMB_OK); + handleCommandLineError(clp); return false; } @@ -2467,12 +2465,16 @@ bool LLAppViewer::initConfiguration() loadSettingsFromDirectory("UserSession"); // - apply command line settings - clp.notify(); + if (! clp.notify()) + { + handleCommandLineError(clp); + return false; + } // Register the core crash option as soon as we can // if we want gdb post-mortem on cores we need to be up and running // ASAP or we might miss init issue etc. - if(clp.hasOption("disablecrashlogger")) + if(gSavedSettings.getBOOL("DisableCrashLogger")) { llwarns << "Crashes will be handled by system, stack trace logs and crash logger are both disabled" << llendl; LLAppViewer::instance()->disableCrashlogger(); @@ -2545,91 +2547,52 @@ bool LLAppViewer::initConfiguration() } } - if(clp.hasOption("channel")) - { - LLVersionInfo::resetChannel(clp.getOption("channel")[0]); + std::string CmdLineChannel(gSavedSettings.getString("CmdLineChannel")); + if(! CmdLineChannel.empty()) + { + LLVersionInfo::resetChannel(CmdLineChannel); } // If we have specified crash on startup, set the global so we'll trigger the crash at the right time - if(clp.hasOption("crashonstartup")) - { - gCrashOnStartup = TRUE; - } + gCrashOnStartup = gSavedSettings.getBOOL("CrashOnStartup"); - if (clp.hasOption("logperformance")) + if (gSavedSettings.getBOOL("LogPerformance")) { LLFastTimer::sLog = TRUE; LLFastTimer::sLogName = std::string("performance"); } - - if (clp.hasOption("logmetrics")) - { - LLFastTimer::sMetricLog = TRUE ; - // '--logmetrics' can be specified with a named test metric argument so the data gathering is done only on that test - // In the absence of argument, every metric is gathered (makes for a rather slow run and hard to decipher report...) - std::string test_name = clp.getOption("logmetrics")[0]; + + std::string test_name(gSavedSettings.getString("LogMetrics")); + if (! test_name.empty()) + { + LLFastTimer::sMetricLog = TRUE ; + // '--logmetrics' is specified with a named test metric argument so the data gathering is done only on that test + // In the absence of argument, every metric would be gathered (makes for a rather slow run and hard to decipher report...) llinfos << "'--logmetrics' argument : " << test_name << llendl; - if (test_name == "") - { - llwarns << "No '--logmetrics' argument given, will output all metrics to " << DEFAULT_METRIC_NAME << llendl; - LLFastTimer::sLogName = DEFAULT_METRIC_NAME; - } - else - { - LLFastTimer::sLogName = test_name; - } + LLFastTimer::sLogName = test_name; } if (clp.hasOption("graphicslevel")) { - const LLCommandLineParser::token_vector_t& value = clp.getOption("graphicslevel"); - if(value.size() != 1) - { - llwarns << "Usage: -graphicslevel <0-3>" << llendl; - } - else - { - std::string detail = value.front(); - mForceGraphicsDetail = TRUE; - - switch (detail.c_str()[0]) - { - case '0': - gSavedSettings.setU32("RenderQualityPerformance", 0); - break; - case '1': - gSavedSettings.setU32("RenderQualityPerformance", 1); - break; - case '2': - gSavedSettings.setU32("RenderQualityPerformance", 2); - break; - case '3': - gSavedSettings.setU32("RenderQualityPerformance", 3); - break; - default: - mForceGraphicsDetail = FALSE; - llwarns << "Usage: -graphicslevel <0-3>" << llendl; - break; - } - } - } - - if (clp.hasOption("analyzeperformance")) - { - LLFastTimerView::sAnalyzePerformance = TRUE; + // User explicitly requested --graphicslevel on the command line. We + // expect this switch has already set RenderQualityPerformance. Check + // that value for validity. + U32 graphicslevel = gSavedSettings.getU32("RenderQualityPerformance"); + if (LLFeatureManager::instance().isValidGraphicsLevel(graphicslevel)) + { + // graphicslevel is valid: save it and engage it later. Capture + // the requested value separately from the settings variable + // because, if this is the first run, LLViewerWindow's constructor + // will call LLFeatureManager::applyRecommendedSettings(), which + // overwrites this settings variable! + mForceGraphicsLevel = graphicslevel; + } } - if (clp.hasOption("replaysession")) - { - gAgentPilot.setReplaySession(TRUE); - } + LLFastTimerView::sAnalyzePerformance = gSavedSettings.getBOOL("AnalyzePerformance"); + gAgentPilot.setReplaySession(gSavedSettings.getBOOL("ReplaySession")); - if (clp.hasOption("nonotifications")) - { - gSavedSettings.getControl("IgnoreAllNotifications")->setValue(true, false); - } - - if (clp.hasOption("debugsession")) + if (gSavedSettings.getBOOL("DebugSession")) { gDebugSession = TRUE; gDebugGL = TRUE; @@ -2654,20 +2617,16 @@ bool LLAppViewer::initConfiguration() // What can happen is that someone can use IE (or potentially // other browsers) and do the rough equivalent of command // injection and steal passwords. Phoenix. SL-55321 - if(clp.hasOption("url")) - { - LLStartUp::setStartSLURL(LLSLURL(clp.getOption("url")[0])); - if(LLStartUp::getStartSLURL().getType() == LLSLURL::LOCATION) - { - LLGridManager::getInstance()->setGridChoice(LLStartUp::getStartSLURL().getGrid()); - - } - } - else if(clp.hasOption("slurl")) - { - LLSLURL start_slurl(clp.getOption("slurl")[0]); + std::string CmdLineLoginLocation(gSavedSettings.getString("CmdLineLoginLocation")); + if(! CmdLineLoginLocation.empty()) + { + LLSLURL start_slurl(CmdLineLoginLocation); LLStartUp::setStartSLURL(start_slurl); - } + if(start_slurl.getType() == LLSLURL::LOCATION) + { + LLGridManager::getInstance()->setGridChoice(start_slurl.getGrid()); + } + } const LLControlVariable* skinfolder = gSavedSettings.getControl("SkinCurrent"); if(skinfolder && LLStringUtil::null != skinfolder->getValue().asString()) @@ -2810,9 +2769,8 @@ bool LLAppViewer::initConfiguration() LL_DEBUGS("AppInit")<<"set start from NextLoginLocation: "<<nextLoginLocation<<LL_ENDL; LLStartUp::setStartSLURL(LLSLURL(nextLoginLocation)); } - else if ( ( clp.hasOption("login") || clp.hasOption("autologin")) - && !clp.hasOption("url") - && !clp.hasOption("slurl")) + else if ((clp.hasOption("login") || clp.hasOption("autologin")) + && gSavedSettings.getString("CmdLineLoginLocation").empty()) { // If automatic login from command line with --login switch // init StartSLURL location. @@ -3186,11 +3144,12 @@ bool LLAppViewer::initWindow() // Initialize GL stuff // - if (mForceGraphicsDetail) + if (mForceGraphicsLevel) { - LLFeatureManager::getInstance()->setGraphicsLevel(gSavedSettings.getU32("RenderQualityPerformance"), false); + LLFeatureManager::getInstance()->setGraphicsLevel(*mForceGraphicsLevel, false); + gSavedSettings.setU32("RenderQualityPerformance", *mForceGraphicsLevel); } - + // Set this flag in case we crash while initializing GL gSavedSettings.setBOOL("RenderInitError", TRUE); gSavedSettings.saveToFile( gSavedSettings.getString("ClientSettingsFile"), TRUE ); diff --git a/indra/newview/llappviewer.h b/indra/newview/llappviewer.h index cd91ae8b2b..3af360b529 100755 --- a/indra/newview/llappviewer.h +++ b/indra/newview/llappviewer.h @@ -32,6 +32,7 @@ #include "llsys.h" // for LLOSInfo #include "lltimer.h" #include "llappcorehttp.h" +#include <boost/optional.hpp> class LLCommandLineParser; class LLFrameTimer; @@ -258,7 +259,7 @@ private: bool mSavedFinalSnapshot; bool mSavePerAccountSettings; // only save per account settings if login succeeded - bool mForceGraphicsDetail; + boost::optional<U32> mForceGraphicsLevel; bool mQuitRequested; // User wants to quit, may have modified documents open. bool mLogoutRequestSent; // Disconnect message sent to simulator, no longer safe to send messages to the sim. diff --git a/indra/newview/llappviewermacosx.cpp b/indra/newview/llappviewermacosx.cpp index 4d340cafa9..c7b437598c 100755 --- a/indra/newview/llappviewermacosx.cpp +++ b/indra/newview/llappviewermacosx.cpp @@ -148,28 +148,13 @@ bool LLAppViewerMacOSX::initParseCommandLine(LLCommandLineParser& clp) // The next two lines add the support for parsing the mac -psn_XXX arg. clp.addOptionDesc("psn", NULL, 1, "MacOSX process serial number"); clp.setCustomParser(parse_psn); - - // First read in the args from arguments txt. - const char* filename = "arguments.txt"; - llifstream ifs(filename, llifstream::binary); - if (!ifs.is_open()) - { - llwarns << "Unable to open file" << filename << llendl; - return false; - } - - if(clp.parseCommandLineFile(ifs) == false) - { - return false; - } - // Then parse the user's command line, so that any --url arg can appear last - // Succesive calls to clp.parse... will NOT override earlier options. + // parse the user's command line if(clp.parseCommandLine(gArgC, gArgV) == false) { return false; } - + // Get the user's preferred language string based on the Mac OS localization mechanism. // To add a new localization: // go to the "Resources" section of the project diff --git a/indra/newview/llcommandlineparser.cpp b/indra/newview/llcommandlineparser.cpp index 17d403bbe1..a6384ded12 100755 --- a/indra/newview/llcommandlineparser.cpp +++ b/indra/newview/llcommandlineparser.cpp @@ -38,16 +38,23 @@ #endif #include <boost/program_options.hpp> +#include <boost/lexical_cast.hpp> #include <boost/bind.hpp> -#include<boost/tokenizer.hpp> +#include <boost/tokenizer.hpp> +#include <boost/assign/list_of.hpp> #if _MSC_VER # pragma warning(pop) #endif #include "llsdserialize.h" +#include "llerror.h" +#include "stringize.h" +#include <string> +#include <set> #include <iostream> #include <sstream> +#include <typeinfo> #include "llcontrol.h" @@ -63,10 +70,22 @@ namespace po = boost::program_options; // This could be good or bad, and probably won't matter for most use cases. namespace { + // List of command-line switches that can't map-to settings variables. + // Going forward, we want every new command-line switch to map-to some + // settings variable. This list is used to validate that. + const std::set<std::string> unmapped_options = boost::assign::list_of + ("help") + ("set") + ("setdefault") + ("settings") + ("sessionsettings") + ("usersessionsettings") + ; + po::options_description gOptionsDesc; po::positional_options_description gPositionalOptions; po::variables_map gVariableMap; - + const LLCommandLineParser::token_vector_t gEmptyValue; void read_file_into_string(std::string& str, const std::basic_istream < char >& file) @@ -384,9 +403,19 @@ bool LLCommandLineParser::parseCommandLineFile(const std::basic_istream < char > return parseCommandLineString(args); } -void LLCommandLineParser::notify() +bool LLCommandLineParser::notify() { - po::notify(gVariableMap); + try + { + po::notify(gVariableMap); + return true; + } + catch (const LLCLPError& e) + { + llwarns << "Caught Error: " << e.what() << llendl; + mErrorMsg = e.what(); + return false; + } } void LLCommandLineParser::printOptions() const @@ -428,43 +457,129 @@ const LLCommandLineParser::token_vector_t& LLCommandLineParser::getOption(const //---------------------------------------------------------------------------- // LLControlGroupCLP defintions //---------------------------------------------------------------------------- +namespace { +LLCommandLineParser::token_vector_t::value_type +onevalue(const std::string& option, + const LLCommandLineParser::token_vector_t& value) +{ + if (value.empty()) + { + // What does it mean when the user specifies a command-line switch + // that requires a value, but omits the value? Complain. + throw LLCLPError(STRINGIZE("No value specified for --" << option << "!")); + } + else if (value.size() > 1) + { + llwarns << "Ignoring extra tokens specified for --" + << option << "." << llendl; + } + return value[0]; +} + +void badvalue(const std::string& option, + const std::string& varname, + const std::string& type, + const std::string& value) +{ + // If the user passes an unusable value for a command-line switch, it + // seems like a really bad idea to just ignore it, even with a log + // warning. + throw LLCLPError(STRINGIZE("Invalid value specified by command-line switch '" << option + << "' for variable '" << varname << "' of type " << type + << ": '" << value << "'")); +} + +template <typename T> +T convertTo(const std::string& option, + const std::string& varname, + const LLCommandLineParser::token_vector_t::value_type& value) +{ + try + { + return boost::lexical_cast<T>(value); + } + catch (const boost::bad_lexical_cast&) + { + badvalue(option, varname, typeid(T).name(), value); + // bogus return; compiler unaware that badvalue() won't return + return T(); + } +} + void setControlValueCB(const LLCommandLineParser::token_vector_t& value, - const std::string& opt_name, - LLControlGroup* ctrlGroup) + const std::string& option, + LLControlVariable* ctrl) { - // *FIX: Do sematic conversion here. + // *FIX: Do semantic conversion here. // LLSD (ImplString) Is no good for doing string to type conversion for... // booleans // compound types // ?... - LLControlVariable* ctrl = ctrlGroup->getControl(opt_name); if(NULL != ctrl) { switch(ctrl->type()) { case TYPE_BOOLEAN: - if(value.size() > 1) + if (value.empty()) { - llwarns << "Ignoring extra tokens." << llendl; + // Boolean-valued command-line switches are unusual. If you + // simply specify the switch without an explicit value, we can + // infer you mean 'true'. + ctrl->setValue(LLSD(true), false); } - - if(value.size() > 0) + else { + // Only call onevalue() AFTER handling value.empty() case! + std::string token(onevalue(option, value)); + // There's a token. check the string for true/false/1/0 etc. BOOL result = false; - BOOL gotSet = LLStringUtil::convertToBOOL(value[0], result); - if(gotSet) + BOOL gotSet = LLStringUtil::convertToBOOL(token, result); + if (gotSet) { ctrl->setValue(LLSD(result), false); } + else + { + badvalue(option, ctrl->getName(), "bool", token); + } + } + break; + + case TYPE_U32: + { + std::string token(onevalue(option, value)); + // To my surprise, for an unsigned target, lexical_cast() doesn't + // complain about an input string such as "-17". In that case, you + // get a very large positive result. So for U32, make sure there's + // no minus sign! + if (token.find('-') == std::string::npos) + { + ctrl->setValue(LLSD::Integer(convertTo<U32>(option, ctrl->getName(), token)), + false); } else { - ctrl->setValue(LLSD(true), false); + badvalue(option, ctrl->getName(), "unsigned", token); } break; + } + + case TYPE_S32: + ctrl->setValue(convertTo<S32>(option, ctrl->getName(), + onevalue(option, value)), false); + break; + + case TYPE_F32: + ctrl->setValue(convertTo<F32>(option, ctrl->getName(), + onevalue(option, value)), false); + break; + // It appears that no one has yet tried to define a command-line + // switch mapped to a settings variable of TYPE_VEC3, TYPE_VEC3D, + // TYPE_RECT, TYPE_COL4, TYPE_COL3. Such types would certainly seem to + // call for a bit of special handling here... default: { // For the default types, let llsd do the conversion. @@ -481,16 +596,9 @@ void setControlValueCB(const LLCommandLineParser::token_vector_t& value, ctrl->setValue(llsdArray, false); } - else if(value.size() > 0) + else { - if(value.size() > 1) - { - llwarns << "Ignoring extra tokens mapped to the setting: " << opt_name << "." << llendl; - } - - LLSD llsdValue; - llsdValue.assign(LLSD::String(value[0])); - ctrl->setValue(llsdValue, false); + ctrl->setValue(onevalue(option, value), false); } } break; @@ -498,12 +606,14 @@ void setControlValueCB(const LLCommandLineParser::token_vector_t& value, } else { - llwarns << "Command Line option mapping '" - << opt_name - << "' not found! Ignoring." - << llendl; + // This isn't anything a user can affect -- it's a misconfiguration on + // the part of the coder. Rub the coder's nose in the problem right + // away so even preliminary testing will surface it. + llerrs << "Command Line option --" << option + << " maps to unknown setting!" << llendl; } } +} // anonymous namespace void LLControlGroupCLP::configure(const std::string& config_filename, LLControlGroup* controlGroup) { @@ -561,11 +671,37 @@ void LLControlGroupCLP::configure(const std::string& config_filename, LLControlG } boost::function1<void, const token_vector_t&> callback; - if(option_params.has("map-to") && (NULL != controlGroup)) + if (! option_params.has("map-to")) + { + // If this option isn't mapped to a settings variable, is it + // one of the ones for which that's unreasonable, or did + // someone carelessly add a new option? (Make all these + // configuration errors fatal so a maintainer will catch them + // right away.) + std::set<std::string>::const_iterator found = unmapped_options.find(long_name); + if (found == unmapped_options.end()) + { + llerrs << "New command-line option " << long_name + << " should map-to a variable in settings.xml" << llendl; + } + } + else // option specifies map-to { std::string controlName = option_params["map-to"].asString(); - callback = boost::bind(setControlValueCB, _1, - controlName, controlGroup); + if (! controlGroup) + { + llerrs << "Must pass gSavedSettings to LLControlGroupCLP::configure() for " + << long_name << " (map-to " << controlName << ")" << llendl; + } + + LLControlVariable* ctrl = controlGroup->getControl(controlName); + if (! ctrl) + { + llerrs << "Option " << long_name << " specifies map-to " << controlName + << " which does not exist" << llendl; + } + + callback = boost::bind(setControlValueCB, _1, long_name, ctrl); } this->addOptionDesc( diff --git a/indra/newview/llcommandlineparser.h b/indra/newview/llcommandlineparser.h index 44f2a26843..71388b8217 100755 --- a/indra/newview/llcommandlineparser.h +++ b/indra/newview/llcommandlineparser.h @@ -86,7 +86,7 @@ public: * * Use this to handle the results of parsing. */ - void notify(); + bool notify(); /** @brief Print a description of the configured options. * diff --git a/indra/newview/llfeaturemanager.cpp b/indra/newview/llfeaturemanager.cpp index ddb9d3bc43..9d292ce7bb 100755 --- a/indra/newview/llfeaturemanager.cpp +++ b/indra/newview/llfeaturemanager.cpp @@ -30,6 +30,7 @@ #include <fstream> #include <boost/regex.hpp> +#include <boost/assign/list_of.hpp> #include "llfeaturemanager.h" #include "lldir.h" @@ -52,6 +53,8 @@ #include "llboost.h" #include "llweb.h" #include "llviewershadermgr.h" +#include "llstring.h" +#include "stringize.h" #if LL_WINDOWS #include "lldxhardware.h" @@ -187,6 +190,55 @@ void LLFeatureList::dump() LL_DEBUGS("RenderInit") << LL_ENDL; } +static const std::vector<std::string> sGraphicsLevelNames = boost::assign::list_of + ("Low") + ("LowMid") + ("Mid") + ("MidHigh") + ("High") + ("HighUltra") + ("Ultra") +; + +U32 LLFeatureManager::getMaxGraphicsLevel() const +{ + return sGraphicsLevelNames.size() - 1; +} + +bool LLFeatureManager::isValidGraphicsLevel(U32 level) const +{ + return (level <= getMaxGraphicsLevel()); +} + +std::string LLFeatureManager::getNameForGraphicsLevel(U32 level) const +{ + if (isValidGraphicsLevel(level)) + { + return sGraphicsLevelNames[level]; + } + return STRINGIZE("Invalid graphics level " << level << ", valid are 0 .. " + << getMaxGraphicsLevel()); +} + +S32 LLFeatureManager::getGraphicsLevelForName(const std::string& name) const +{ + const std::string FixedFunction("FixedFunction"); + std::string rname(name); + if (LLStringUtil::endsWith(rname, FixedFunction)) + { + // chop off any "FixedFunction" suffix + rname = rname.substr(0, rname.length() - FixedFunction.length()); + } + for (S32 i(0), iend(getMaxGraphicsLevel()); i <= iend; ++i) + { + if (sGraphicsLevelNames[i] == rname) + { + return i; + } + } + return -1; +} + LLFeatureList *LLFeatureManager::findMask(const std::string& name) { if (mMaskList.count(name)) @@ -620,7 +672,7 @@ void LLFeatureManager::applyRecommendedSettings() { // apply saved settings // cap the level at 2 (high) - S32 level = llmax(GPU_CLASS_0, llmin(mGPUClass, GPU_CLASS_5)); + U32 level = llmax(GPU_CLASS_0, llmin(mGPUClass, GPU_CLASS_5)); llinfos << "Applying Recommended Features" << llendl; @@ -696,62 +748,33 @@ void LLFeatureManager::applyFeatures(bool skipFeatures) } } -void LLFeatureManager::setGraphicsLevel(S32 level, bool skipFeatures) +void LLFeatureManager::setGraphicsLevel(U32 level, bool skipFeatures) { LLViewerShaderMgr::sSkipReload = true; applyBaseMasks(); - - switch (level) + + // if we're passed an invalid level, default to "Low" + std::string features(isValidGraphicsLevel(level)? getNameForGraphicsLevel(level) : "Low"); + if (features == "Low") { - case 0: #if LL_DARWIN - // This Mac-specific change is to insure that we force 'Basic Shaders' for all Mac - // systems which support them instead of falling back to fixed-function unnecessarily - // MAINT-2157 - // - if (gGLManager.mGLVersion < 2.1f) - { - maskFeatures("LowFixedFunction"); - } - else - { //same as low, but with "Basic Shaders" enabled - maskFeatures("Low"); - } + // This Mac-specific change is to insure that we force 'Basic Shaders' for all Mac + // systems which support them instead of falling back to fixed-function unnecessarily + // MAINT-2157 + if (gGLManager.mGLVersion < 2.1f) #else - if (gGLManager.mGLVersion < 3.f || gGLManager.mIsIntel) - { //only use fixed function by default if GL version < 3.0 or this is an intel graphics chip - maskFeatures("LowFixedFunction"); - } - else - { //same as low, but with "Basic Shaders" enabled - maskFeatures("Low"); - } + // only use fixed function by default if GL version < 3.0 or this is an intel graphics chip + if (gGLManager.mGLVersion < 3.f || gGLManager.mIsIntel) #endif - break; - case 1: - maskFeatures("LowMid"); - break; - case 2: - maskFeatures("Mid"); - break; - case 3: - maskFeatures("MidHigh"); - break; - case 4: - maskFeatures("High"); - break; - case 5: - maskFeatures("HighUltra"); - break; - case 6: - maskFeatures("Ultra"); - break; - default: - maskFeatures("Low"); - break; + { + // same as Low, but with "Basic Shaders" disabled + features = "LowFixedFunction"; + } } + maskFeatures(features); + applyFeatures(skipFeatures); LLViewerShaderMgr::sSkipReload = false; diff --git a/indra/newview/llfeaturemanager.h b/indra/newview/llfeaturemanager.h index ad72c16743..3b8d251236 100755 --- a/indra/newview/llfeaturemanager.h +++ b/indra/newview/llfeaturemanager.h @@ -134,8 +134,18 @@ public: // skipFeatures forces skipping of mostly hardware settings // that we don't want to change when we change graphics // settings - void setGraphicsLevel(S32 level, bool skipFeatures); - + void setGraphicsLevel(U32 level, bool skipFeatures); + + // What 'level' values are valid to pass to setGraphicsLevel()? + // 0 is the low end... + U32 getMaxGraphicsLevel() const; + bool isValidGraphicsLevel(U32 level) const; + + // setGraphicsLevel() levels have names. + std::string getNameForGraphicsLevel(U32 level) const; + // returns -1 for unrecognized name (hence S32 rather than U32) + S32 getGraphicsLevelForName(const std::string& name) const; + void applyBaseMasks(); void applyRecommendedSettings(); diff --git a/indra/newview/llfloaterabout.cpp b/indra/newview/llfloaterabout.cpp index 83fb887d81..163f294d2a 100755 --- a/indra/newview/llfloaterabout.cpp +++ b/indra/newview/llfloaterabout.cpp @@ -33,8 +33,10 @@ // Viewer includes #include "llagent.h" +#include "llagentui.h" #include "llappviewer.h" #include "llsecondlifeurls.h" +#include "llslurl.h" #include "llvoiceclient.h" #include "lluictrlfactory.h" #include "llviewertexteditor.h" @@ -250,12 +252,16 @@ LLSD LLFloaterAbout::getInfo() LLViewerRegion* region = gAgent.getRegion(); if (region) { - const LLVector3d &pos = gAgent.getPositionGlobal(); + LLVector3d pos = gAgent.getPositionGlobal(); info["POSITION"] = ll_sd_from_vector3d(pos); + info["POSITION_LOCAL"] = ll_sd_from_vector3(gAgent.getPosAgentFromGlobal(pos)); info["REGION"] = gAgent.getRegion()->getName(); info["HOSTNAME"] = gAgent.getRegion()->getHost().getHostName(); info["HOSTIP"] = gAgent.getRegion()->getHost().getString(); info["SERVER_VERSION"] = gLastVersionChannel; + LLSLURL slurl; + LLAgentUI::buildSLURL(slurl); + info["SLURL"] = slurl.getSLURLString(); } // CPU diff --git a/indra/newview/llfloaterimnearbychat.cpp b/indra/newview/llfloaterimnearbychat.cpp index 56b0c15cb9..38592b3f65 100755 --- a/indra/newview/llfloaterimnearbychat.cpp +++ b/indra/newview/llfloaterimnearbychat.cpp @@ -125,7 +125,7 @@ BOOL LLFloaterIMNearbyChat::postBuild() setTitle(LLTrans::getString("NearbyChatTitle")); // obsolete, but may be needed for backward compatibility? - gSavedSettings.declareS32("nearbychat_showicons_and_names", 2, "NearByChat header settings", true); + gSavedSettings.declareS32("nearbychat_showicons_and_names", 2, "NearByChat header settings", LLControlVariable::PERSIST_NONDFT); if (gSavedPerAccountSettings.getBOOL("LogShowHistory")) { diff --git a/indra/newview/llviewercontrol.cpp b/indra/newview/llviewercontrol.cpp index afbb59e723..744ec4de2b 100755 --- a/indra/newview/llviewercontrol.cpp +++ b/indra/newview/llviewercontrol.cpp @@ -83,7 +83,9 @@ BOOL gHackGodmode = FALSE; #endif - +// Should you contemplate changing the name "Global", please first grep for +// that string literal. There are at least a couple other places in the C++ +// code that assume the LLControlGroup named "Global" is gSavedSettings. LLControlGroup gSavedSettings("Global"); // saved at end of session LLControlGroup gSavedPerAccountSettings("PerAccount"); // saved at end of session LLControlGroup gCrashSettings("CrashSettings"); // saved at end of session diff --git a/indra/newview/skins/default/xui/da/floater_about.xml b/indra/newview/skins/default/xui/da/floater_about.xml index fc8bc33096..9206690c8f 100755 --- a/indra/newview/skins/default/xui/da/floater_about.xml +++ b/indra/newview/skins/default/xui/da/floater_about.xml @@ -8,7 +8,7 @@ Bygget med [COMPILER] version [COMPILER_VERSION] </floater.string> <floater.string name="AboutPosition"> - Du er ved [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1] i regionen [REGION] lokaliseret ved <nolink>[HOSTNAME]</nolink> ([HOSTIP]) + Du er ved [POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1] i regionen [REGION] lokaliseret ved <nolink>[HOSTNAME]</nolink> ([HOSTIP]) [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] </floater.string> diff --git a/indra/newview/skins/default/xui/de/floater_about.xml b/indra/newview/skins/default/xui/de/floater_about.xml index 4387a61963..5245467183 100755 --- a/indra/newview/skins/default/xui/de/floater_about.xml +++ b/indra/newview/skins/default/xui/de/floater_about.xml @@ -8,7 +8,7 @@ Kompiliert mit [COMPILER] version [COMPILER_VERSION] </floater.string> <floater.string name="AboutPosition"> - Sie befinden sich in [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1] in [REGION] auf <nolink>[HOSTNAME]</nolink> ([HOSTIP]) + Sie befinden sich in [POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1] in [REGION] auf <nolink>[HOSTNAME]</nolink> ([HOSTIP]) [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] </floater.string> diff --git a/indra/newview/skins/default/xui/en/floater_about.xml b/indra/newview/skins/default/xui/en/floater_about.xml index 63eb87f27a..703015af20 100755 --- a/indra/newview/skins/default/xui/en/floater_about.xml +++ b/indra/newview/skins/default/xui/en/floater_about.xml @@ -22,7 +22,9 @@ Built with [COMPILER] version [COMPILER_VERSION] </floater.string> <floater.string name="AboutPosition"> -You are at [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1] in [REGION] located at <nolink>[HOSTNAME]</nolink> ([HOSTIP]) +You are at [POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1] in [REGION] located at <nolink>[HOSTNAME]</nolink> ([HOSTIP]) +SLURL: <nolink>[SLURL]</nolink> +(global coordinates [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1]) [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] diff --git a/indra/newview/skins/default/xui/es/floater_about.xml b/indra/newview/skins/default/xui/es/floater_about.xml index 3696c7e12c..7ca1e3721f 100755 --- a/indra/newview/skins/default/xui/es/floater_about.xml +++ b/indra/newview/skins/default/xui/es/floater_about.xml @@ -8,7 +8,7 @@ Compilado con [COMPILER], versión [COMPILER_VERSION] </floater.string> <floater.string name="AboutPosition"> - Estás en la posición [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1], de [REGION], alojada en <nolink>[HOSTNAME]</nolink> ([HOSTIP]) + Estás en la posición [POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1], de [REGION], alojada en <nolink>[HOSTNAME]</nolink> ([HOSTIP]) [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] </floater.string> diff --git a/indra/newview/skins/default/xui/fr/floater_about.xml b/indra/newview/skins/default/xui/fr/floater_about.xml index a659cb4245..d45bdccf3e 100755 --- a/indra/newview/skins/default/xui/fr/floater_about.xml +++ b/indra/newview/skins/default/xui/fr/floater_about.xml @@ -8,7 +8,7 @@ Compilé avec [COMPILER] version [COMPILER_VERSION] </floater.string> <floater.string name="AboutPosition"> - Vous êtes à [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1] dans [REGION], se trouvant à <nolink>[HOSTNAME]</nolink> ([HOSTIP]) + Vous êtes à [POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1] dans [REGION], se trouvant à <nolink>[HOSTNAME]</nolink> ([HOSTIP]) [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] </floater.string> diff --git a/indra/newview/skins/default/xui/it/floater_about.xml b/indra/newview/skins/default/xui/it/floater_about.xml index c672511fc5..b0fb585fa2 100755 --- a/indra/newview/skins/default/xui/it/floater_about.xml +++ b/indra/newview/skins/default/xui/it/floater_about.xml @@ -8,7 +8,7 @@ Generato con [COMPILER] versione [COMPILER_VERSION] </floater.string> <floater.string name="AboutPosition"> - Tu sei [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1] in [REGION] che si trova a <nolink>[HOSTNAME]</nolink> ([HOSTIP]) + Tu sei [POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1] in [REGION] che si trova a <nolink>[HOSTNAME]</nolink> ([HOSTIP]) [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] </floater.string> diff --git a/indra/newview/skins/default/xui/ja/floater_about.xml b/indra/newview/skins/default/xui/ja/floater_about.xml index 6d5df75645..eae52c98ec 100755 --- a/indra/newview/skins/default/xui/ja/floater_about.xml +++ b/indra/newview/skins/default/xui/ja/floater_about.xml @@ -8,7 +8,7 @@ コンパイラー [COMPILER] [COMPILER_VERSION] バージョン </floater.string> <floater.string name="AboutPosition"> - あなたの現在地は、[POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1] の [REGION] です。位置は <nolink>[HOSTNAME]</nolink> です。（[HOSTIP]） + あなたの現在地は、[POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1] の [REGION] です。位置は <nolink>[HOSTNAME]</nolink> です。（[HOSTIP]） [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] </floater.string> diff --git a/indra/newview/skins/default/xui/pl/floater_about.xml b/indra/newview/skins/default/xui/pl/floater_about.xml index 409429ffaa..61a72ff27d 100755 --- a/indra/newview/skins/default/xui/pl/floater_about.xml +++ b/indra/newview/skins/default/xui/pl/floater_about.xml @@ -8,7 +8,7 @@ Buduj z [COMPILER] wersją [COMPILER_VERSION] </floater.string> <floater.string name="AboutPosition"> - Położenie [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1] w [REGION] zlokalizowanym w <nolink>[HOSTNAME]</nolink> ([HOSTIP]) + Położenie [POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1] w [REGION] zlokalizowanym w <nolink>[HOSTNAME]</nolink> ([HOSTIP]) [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] </floater.string> diff --git a/indra/newview/skins/default/xui/pt/floater_about.xml b/indra/newview/skins/default/xui/pt/floater_about.xml index 299f88b22a..d089266342 100755 --- a/indra/newview/skins/default/xui/pt/floater_about.xml +++ b/indra/newview/skins/default/xui/pt/floater_about.xml @@ -7,7 +7,7 @@ Construído com [COMPILER] versão [COMPILER_VERSION] </floater.string> <floater.string name="AboutPosition"> - Você está em [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1] em [REGION] localizado em [HOSTNAME]</nolink>([HOSTIP]) + Você está em [POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1] em [REGION] localizado em [HOSTNAME]</nolink>([HOSTIP]) [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] </floater.string> diff --git a/indra/newview/skins/default/xui/ru/floater_about.xml b/indra/newview/skins/default/xui/ru/floater_about.xml index bb6266ac9a..2b2b3cf453 100755 --- a/indra/newview/skins/default/xui/ru/floater_about.xml +++ b/indra/newview/skins/default/xui/ru/floater_about.xml @@ -8,7 +8,7 @@ Использован компилятор [COMPILER], версия [COMPILER_VERSION] </floater.string> <floater.string name="AboutPosition"> - Вы в точке [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1] в регионе «[REGION]», расположенном на <nolink>[HOSTNAME]</nolink> ([HOSTIP]) + Вы в точке [POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1] в регионе «[REGION]», расположенном на <nolink>[HOSTNAME]</nolink> ([HOSTIP]) [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] </floater.string> diff --git a/indra/newview/skins/default/xui/tr/floater_about.xml b/indra/newview/skins/default/xui/tr/floater_about.xml index 9cc9c7a220..4dcf6200c6 100755 --- a/indra/newview/skins/default/xui/tr/floater_about.xml +++ b/indra/newview/skins/default/xui/tr/floater_about.xml @@ -8,7 +8,7 @@ [COMPILER] [COMPILER_VERSION] sürümü ile oluşturuldu </floater.string> <floater.string name="AboutPosition"> - <nolink>[HOSTNAME]</nolink> ([HOSTIP]) üzerinde bulunan [REGION] içerisinde [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1] konumundasınız + <nolink>[HOSTNAME]</nolink> ([HOSTIP]) üzerinde bulunan [REGION] içerisinde [POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1] konumundasınız [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] </floater.string> diff --git a/indra/newview/skins/default/xui/zh/floater_about.xml b/indra/newview/skins/default/xui/zh/floater_about.xml index 643881e416..1193243c7e 100755 --- a/indra/newview/skins/default/xui/zh/floater_about.xml +++ b/indra/newview/skins/default/xui/zh/floater_about.xml @@ -8,7 +8,7 @@ 以 [COMPILER_VERSION] 版本 [COMPILER] 建置 </floater.string> <floater.string name="AboutPosition"> - 你的方位是 [POSITION_0,number,1], [POSITION_1,number,1], [POSITION_2,number,1]，地區名：[REGION]，主機：<nolink>[HOSTNAME]</nolink> ([HOSTIP]) + 你的方位是 [POSITION_LOCAL_0,number,1], [POSITION_LOCAL_1,number,1], [POSITION_LOCAL_2,number,1]，地區名：[REGION]，主機：<nolink>[HOSTNAME]</nolink> ([HOSTIP]) [SERVER_VERSION] [SERVER_RELEASE_NOTES_URL] </floater.string> diff --git a/indra/newview/tests/llagentaccess_test.cpp b/indra/newview/tests/llagentaccess_test.cpp index 3ba25f3c10..a40b5c9a3d 100755 --- a/indra/newview/tests/llagentaccess_test.cpp +++ b/indra/newview/tests/llagentaccess_test.cpp @@ -49,10 +49,10 @@ LLControlGroup::~LLControlGroup() } // Implementation of just the LLControlGroup methods we requre -BOOL LLControlGroup::declareU32(const std::string& name, U32 initial_val, const std::string& comment, BOOL persist) +LLControlVariable* LLControlGroup::declareU32(const std::string& name, U32 initial_val, const std::string& comment, LLControlVariable::ePersist persist) { test_preferred_maturity = initial_val; - return true; + return NULL; } void LLControlGroup::setU32(const std::string& name, U32 val) @@ -80,7 +80,7 @@ namespace tut void agentaccess_object_t::test<1>() { LLControlGroup cgr("test"); - cgr.declareU32("PreferredMaturity", SIM_ACCESS_PG, "declared_for_test", FALSE); + cgr.declareU32("PreferredMaturity", SIM_ACCESS_PG, "declared_for_test", LLControlVariable::PERSIST_NO); LLAgentAccess aa(cgr); cgr.setU32("PreferredMaturity", SIM_ACCESS_PG); @@ -109,7 +109,7 @@ namespace tut void agentaccess_object_t::test<2>() { LLControlGroup cgr("test"); - cgr.declareU32("PreferredMaturity", SIM_ACCESS_PG, "declared_for_test", FALSE); + cgr.declareU32("PreferredMaturity", SIM_ACCESS_PG, "declared_for_test", LLControlVariable::PERSIST_NO); LLAgentAccess aa(cgr); // make sure default is PG @@ -157,7 +157,7 @@ namespace tut void agentaccess_object_t::test<3>() { LLControlGroup cgr("test"); - cgr.declareU32("PreferredMaturity", SIM_ACCESS_PG, "declared_for_test", FALSE); + cgr.declareU32("PreferredMaturity", SIM_ACCESS_PG, "declared_for_test", LLControlVariable::PERSIST_NO); LLAgentAccess aa(cgr); #ifndef HACKED_GODLIKE_VIEWER @@ -195,7 +195,7 @@ namespace tut void agentaccess_object_t::test<4>() { LLControlGroup cgr("test"); - cgr.declareU32("PreferredMaturity", SIM_ACCESS_PG, "declared_for_test", FALSE); + cgr.declareU32("PreferredMaturity", SIM_ACCESS_PG, "declared_for_test", LLControlVariable::PERSIST_NO); LLAgentAccess aa(cgr); #ifndef HACKED_GODLIKE_VIEWER @@ -272,7 +272,7 @@ namespace tut void agentaccess_object_t::test<5>() { LLControlGroup cgr("test"); - cgr.declareU32("PreferredMaturity", SIM_ACCESS_PG, "declared_for_test", FALSE); + cgr.declareU32("PreferredMaturity", SIM_ACCESS_PG, "declared_for_test", LLControlVariable::PERSIST_NO); LLAgentAccess aa(cgr); cgr.setU32("PreferredMaturity", SIM_ACCESS_ADULT); diff --git a/indra/newview/tests/lllogininstance_test.cpp b/indra/newview/tests/lllogininstance_test.cpp index f038112fd0..272a46aa8d 100755 --- a/indra/newview/tests/lllogininstance_test.cpp +++ b/indra/newview/tests/lllogininstance_test.cpp @@ -175,8 +175,8 @@ F32 LLControlGroup::getF32(const std::string& name) { return 0.0f; } U32 LLControlGroup::saveToFile(const std::string& filename, BOOL nondefault_only) { return 1; } void LLControlGroup::setString(const std::string& name, const std::string& val) {} std::string LLControlGroup::getString(const std::string& name) { return "test_string"; } -BOOL LLControlGroup::declareBOOL(const std::string& name, BOOL initial_val, const std::string& comment, BOOL persist) { return TRUE; } -BOOL LLControlGroup::declareString(const std::string& name, const std::string &initial_val, const std::string& comment, BOOL persist) { return TRUE; } +LLControlVariable* LLControlGroup::declareBOOL(const std::string& name, BOOL initial_val, const std::string& comment, LLControlVariable::ePersist persist) { return NULL; } +LLControlVariable* LLControlGroup::declareString(const std::string& name, const std::string &initial_val, const std::string& comment, LLControlVariable::ePersist persist) { return NULL; } #include "lluicolortable.h" void LLUIColorTable::saveUserSettings(void)const {} @@ -344,13 +344,13 @@ namespace tut gTOSReplyPump = 0; // clear the callback. - gSavedSettings.declareBOOL("NoInventoryLibrary", FALSE, "", FALSE); - gSavedSettings.declareBOOL("ConnectAsGod", FALSE, "", FALSE); - gSavedSettings.declareBOOL("UseDebugMenus", FALSE, "", FALSE); - gSavedSettings.declareBOOL("ForceMandatoryUpdate", FALSE, "", FALSE); - gSavedSettings.declareString("ClientSettingsFile", "test_settings.xml", "", FALSE); - gSavedSettings.declareString("NextLoginLocation", "", "", FALSE); - gSavedSettings.declareBOOL("LoginLastLocation", FALSE, "", FALSE); + gSavedSettings.declareBOOL("NoInventoryLibrary", FALSE, "", LLControlVariable::PERSIST_NO); + gSavedSettings.declareBOOL("ConnectAsGod", FALSE, "", LLControlVariable::PERSIST_NO); + gSavedSettings.declareBOOL("UseDebugMenus", FALSE, "", LLControlVariable::PERSIST_NO); + gSavedSettings.declareBOOL("ForceMandatoryUpdate", FALSE, "", LLControlVariable::PERSIST_NO); + gSavedSettings.declareString("ClientSettingsFile", "test_settings.xml", "", LLControlVariable::PERSIST_NO); + gSavedSettings.declareString("NextLoginLocation", "", "", LLControlVariable::PERSIST_NO); + gSavedSettings.declareBOOL("LoginLastLocation", FALSE, "", LLControlVariable::PERSIST_NO); LLSD authenticator = LLSD::emptyMap(); LLSD identifier = LLSD::emptyMap(); diff --git a/indra/newview/tests/llsecapi_test.cpp b/indra/newview/tests/llsecapi_test.cpp index 703603e2db..d7e87ed52e 100755 --- a/indra/newview/tests/llsecapi_test.cpp +++ b/indra/newview/tests/llsecapi_test.cpp @@ -39,10 +39,10 @@ LLControlGroup::LLControlGroup(const std::string& name) : LLInstanceTracker<LLControlGroup, std::string>(name) {} LLControlGroup::~LLControlGroup() {} -BOOL LLControlGroup::declareString(const std::string& name, +LLControlVariable* LLControlGroup::declareString(const std::string& name, const std::string& initial_val, const std::string& comment, - BOOL persist) {return TRUE;} + LLControlVariable::ePersist persist) {return NULL;} void LLControlGroup::setString(const std::string& name, const std::string& val){} std::string LLControlGroup::getString(const std::string& name) { diff --git a/indra/newview/tests/llsechandler_basic_test.cpp b/indra/newview/tests/llsechandler_basic_test.cpp index 0235400976..2a8dc15346 100755 --- a/indra/newview/tests/llsechandler_basic_test.cpp +++ b/indra/newview/tests/llsechandler_basic_test.cpp @@ -71,10 +71,10 @@ std::string gLastName; LLControlGroup::LLControlGroup(const std::string& name) : LLInstanceTracker<LLControlGroup, std::string>(name) {} LLControlGroup::~LLControlGroup() {} -BOOL LLControlGroup::declareString(const std::string& name, +LLControlVariable* LLControlGroup::declareString(const std::string& name, const std::string& initial_val, const std::string& comment, - BOOL persist) {return TRUE;} + LLControlVariable::ePersist persist) {return NULL;} void LLControlGroup::setString(const std::string& name, const std::string& val){} std::string LLControlGroup::getString(const std::string& name) { diff --git a/indra/newview/tests/llslurl_test.cpp b/indra/newview/tests/llslurl_test.cpp index 09343ef227..86229ad636 100755 --- a/indra/newview/tests/llslurl_test.cpp +++ b/indra/newview/tests/llslurl_test.cpp @@ -37,10 +37,10 @@ LLControlGroup::LLControlGroup(const std::string& name) : LLInstanceTracker<LLControlGroup, std::string>(name) {} LLControlGroup::~LLControlGroup() {} -BOOL LLControlGroup::declareString(const std::string& name, +LLControlVariable* LLControlGroup::declareString(const std::string& name, const std::string& initial_val, const std::string& comment, - BOOL persist) {return TRUE;} + LLControlVariable::ePersist persist) {return NULL;} void LLControlGroup::setString(const std::string& name, const std::string& val){} std::string gCmdLineLoginURI; diff --git a/indra/newview/tests/llviewerhelputil_test.cpp b/indra/newview/tests/llviewerhelputil_test.cpp index 710881d811..f6456a2839 100755 --- a/indra/newview/tests/llviewerhelputil_test.cpp +++ b/indra/newview/tests/llviewerhelputil_test.cpp @@ -49,10 +49,10 @@ static std::string gOS; LLControlGroup::LLControlGroup(const std::string& name) : LLInstanceTracker<LLControlGroup, std::string>(name) {} LLControlGroup::~LLControlGroup() {} -BOOL LLControlGroup::declareString(const std::string& name, +LLControlVariable* LLControlGroup::declareString(const std::string& name, const std::string& initial_val, const std::string& comment, - BOOL persist) {return TRUE;} + LLControlVariable::ePersist persist) {return NULL;} void LLControlGroup::setString(const std::string& name, const std::string& val){} std::string LLControlGroup::getString(const std::string& name) { diff --git a/indra/newview/tests/llviewernetwork_test.cpp b/indra/newview/tests/llviewernetwork_test.cpp index a1e97ea17e..06de1cbfa2 100755 --- a/indra/newview/tests/llviewernetwork_test.cpp +++ b/indra/newview/tests/llviewernetwork_test.cpp @@ -37,10 +37,10 @@ LLControlGroup::LLControlGroup(const std::string& name) : LLInstanceTracker<LLControlGroup, std::string>(name) {} LLControlGroup::~LLControlGroup() {} -BOOL LLControlGroup::declareString(const std::string& name, +LLControlVariable* LLControlGroup::declareString(const std::string& name, const std::string& initial_val, const std::string& comment, - BOOL persist) {return TRUE;} + LLControlVariable::ePersist persist) {return NULL;} void LLControlGroup::setString(const std::string& name, const std::string& val){} std::string gCmdLineLoginURI; diff --git a/indra/newview/tests/llxmlrpclistener_test.cpp b/indra/newview/tests/llxmlrpclistener_test.cpp index 711c2a3d51..20f913b670 100755 --- a/indra/newview/tests/llxmlrpclistener_test.cpp +++ b/indra/newview/tests/llxmlrpclistener_test.cpp @@ -62,8 +62,8 @@ namespace tut // These variables are required by machinery used by // LLXMLRPCTransaction. The values reflect reality for this test // executable; hopefully these values are correct. - gSavedSettings.declareBOOL("BrowserProxyEnabled", FALSE, "", FALSE); // don't persist - gSavedSettings.declareBOOL("NoVerifySSLCert", TRUE, "", FALSE); // don't persist + gSavedSettings.declareBOOL("BrowserProxyEnabled", FALSE, "", LLControlVariable::PERSIST_NO); // don't persist + gSavedSettings.declareBOOL("NoVerifySSLCert", TRUE, "", LLControlVariable::PERSIST_NO); // don't persist } // LLEventPump listener signature diff --git a/indra/newview/viewer_manifest.py b/indra/newview/viewer_manifest.py index 5e08e54b7c..19863dd845 100755 --- a/indra/newview/viewer_manifest.py +++ b/indra/newview/viewer_manifest.py @@ -34,9 +34,15 @@ import tarfile import time import random viewer_dir = os.path.dirname(__file__) -# add llmanifest library to our path so we don't have to muck with PYTHONPATH -sys.path.append(os.path.join(viewer_dir, '../lib/python/indra/util')) -from llmanifest import LLManifest, main, proper_windows_path, path_ancestors +# Add indra/lib/python to our path so we don't have to muck with PYTHONPATH. +# Put it FIRST because some of our build hosts have an ancient install of +# indra.util.llmanifest under their system Python! +sys.path.insert(0, os.path.join(viewer_dir, os.pardir, "lib", "python")) +from indra.util.llmanifest import LLManifest, main, proper_windows_path, path_ancestors +try: + from llbase import llsd +except ImportError: + from indra.base import llsd class ViewerManifest(LLManifest): def is_packaging_viewer(self): @@ -65,13 +71,13 @@ class ViewerManifest(LLManifest): # include the entire shaders directory recursively self.path("shaders") # include the extracted list of contributors - contributor_names = self.extract_names("../../doc/contributions.txt") - self.put_in_file(contributor_names, "contributors.txt") - self.file_list.append(["../../doc/contributions.txt",self.dst_path_of("contributors.txt")]) + contributions_path = "../../doc/contributions.txt" + contributor_names = self.extract_names(contributions_path) + self.put_in_file(contributor_names, "contributors.txt", src=contributions_path) # include the extracted list of translators - translator_names = self.extract_names("../../doc/translations.txt") - self.put_in_file(translator_names, "translators.txt") - self.file_list.append(["../../doc/translations.txt",self.dst_path_of("translators.txt")]) + translations_path = "../../doc/translations.txt" + translator_names = self.extract_names(translations_path) + self.put_in_file(translator_names, "translators.txt", src=translations_path) # include the list of Lindens (if any) # see https://wiki.lindenlab.com/wiki/Generated_Linden_Credits linden_names_path = os.getenv("LINDEN_CREDITS") @@ -85,10 +91,9 @@ class ViewerManifest(LLManifest): else: # all names should be one line, but the join below also converts to a string linden_names = ', '.join(linden_file.readlines()) - self.put_in_file(linden_names, "lindens.txt") + self.put_in_file(linden_names, "lindens.txt", src=linden_names_path) linden_file.close() print "Linden names extracted from '%s'" % linden_names_path - self.file_list.append([linden_names_path,self.dst_path_of("lindens.txt")]) # ... and the entire windlight directory self.path("windlight") @@ -99,6 +104,27 @@ class ViewerManifest(LLManifest): self.path("dictionaries") self.end_prefix(pkgdir) + # CHOP-955: If we have "sourceid" in the build process + # environment, generate it into settings_install.xml. + try: + sourceid = os.environ["sourceid"] + except KeyError: + # no sourceid, no settings_install.xml file + pass + else: + if sourceid: + # Single-entry subset of the LLSD content of settings.xml + content = dict(sourceid=dict(Comment='Identify referring agency to Linden web servers', + Persist=1, + Type='String', + Value=sourceid)) + # put_in_file(src=) need not be an actual pathname; it + # only needs to be non-empty + settings_install = self.put_in_file(llsd.format_pretty_xml(content), + "settings_install.xml", + src="environment") + print "Put sourceid '%s' in %s" % (sourceid, settings_install) + self.end_prefix("app_settings") if self.prefix(src="character"): @@ -196,24 +222,26 @@ class ViewerManifest(LLManifest): """ Convenience function that returns the command-line flags for the grid""" - # Set command line flags relating to the target grid - grid_flags = '' - if not self.default_grid(): - grid_flags = "--grid %(grid)s "\ - "--helperuri http://preview-%(grid)s.secondlife.com/helpers/" %\ - {'grid':self.grid()} - - # Deal with settings - setting_flags = '' - if not self.default_channel() or not self.default_grid(): - if self.default_grid(): - setting_flags = '--settings settings_%s.xml'\ - % self.channel_lowerword() - else: - setting_flags = '--settings settings_%s_%s.xml'\ - % (self.grid(), self.channel_lowerword()) - - return " ".join((grid_flags, setting_flags)).strip() + # The original role of this method seems to have been to build a + # grid-specific viewer: one that would, on launch, preselect a + # particular grid. (Apparently that dates back to when the protocol + # between viewer and simulator required them to be updated in + # lockstep, so that "the beta grid" required "a beta viewer.") But + # those viewer command-line switches no longer work without tweaking + # user_settings/grids.xml. In fact, going forward, it's unclear what + # use case that would address. + + # This method also set a channel-specific (or grid-and-channel- + # specific) user_settings/settings_something.xml file. It has become + # clear that saving user settings in a channel-specific file causes + # more problems (confusion) than it solves, so we've discontinued that. + + # In fact we now avoid forcing viewer command-line switches at all, + # instead introducing a settings_install.xml file. Command-line + # switches don't aggregate well; for instance the generated --channel + # switch actually prevented the user specifying --channel on the + # command line. Settings files have well-defined override semantics. + return None def extract_names(self,src): try: @@ -530,8 +558,7 @@ class WindowsManifest(ViewerManifest): 'final_exe' : self.final_exe(), 'grid':self.args['grid'], 'grid_caps':self.args['grid'].upper(), - # escape quotes becase NSIS doesn't handle them well - 'flags':self.flags_list().replace('"', '$\\"'), + 'flags':'', 'channel':self.channel(), 'channel_oneword':self.channel_oneword(), 'channel_unique':self.channel_unique(), @@ -759,9 +786,6 @@ class DarwinManifest(ViewerManifest): self.end_prefix("llplugin") - # command line arguments for connecting to the proper grid - self.put_in_file(self.flags_list(), 'arguments.txt') - self.end_prefix("Resources") self.end_prefix("Contents") @@ -807,10 +831,6 @@ class DarwinManifest(ViewerManifest): 'bundle': self.get_dst_prefix() }) - channel_standin = 'Second Life Viewer' # hah, our default channel is not usable on its own - if not self.default_channel(): - channel_standin = self.channel() - imagename="SecondLife_" + '_'.join(self.args['version']) # MBW -- If the mounted volume name changes, it breaks the .DS_Store's background image and icon positioning. @@ -928,9 +948,6 @@ class LinuxManifest(ViewerManifest): self.path("install.sh") self.end_prefix("linux_tools") - # Create an appropriate gridargs.dat for this package, denoting required grid. - self.put_in_file(self.flags_list(), 'etc/gridargs.dat') - if self.prefix(src="", dst="bin"): self.path("secondlife-bin","do-not-directly-run-secondlife-bin") self.path("../linux_crash_logger/linux-crash-logger","linux-crash-logger.bin") |