diff options
Diffstat (limited to 'indra/newview')
122 files changed, 2113 insertions, 775 deletions
diff --git a/indra/newview/CMakeLists.txt b/indra/newview/CMakeLists.txt index 9e6cd48f21..6c976e3f2d 100644 --- a/indra/newview/CMakeLists.txt +++ b/indra/newview/CMakeLists.txt @@ -12,12 +12,14 @@ include(bugsplat) include(BuildPackagesInfo) include(BuildVersion) include(CMakeCopyIfDifferent) +include(CubemapToEquirectangularJS) include(DBusGlib) include(DragDrop) include(EXPAT) include(FMODSTUDIO) include(GLOD) include(Hunspell) +include(JPEGEncoderBasic) include(JsonCpp) include(LLAppearance) include(LLAudio) @@ -37,7 +39,7 @@ include(LLPlugin) include(LLPrimitive) include(LLRender) include(LLUI) -include(LLVFS) +include(LLFileSystem) include(LLWindow) include(LLXML) include(NDOF) @@ -47,6 +49,7 @@ include(OpenGL) include(OpenSSL) include(PNG) include(TemplateCheck) +include(ThreeJS) include(UI) include(UnixInstall) include(ViewerMiscLibs) @@ -82,7 +85,7 @@ include_directories( ${LLPRIMITIVE_INCLUDE_DIRS} ${LLRENDER_INCLUDE_DIRS} ${LLUI_INCLUDE_DIRS} - ${LLVFS_INCLUDE_DIRS} + ${LLFILESYSTEM_INCLUDE_DIRS} ${LLWINDOW_INCLUDE_DIRS} ${LLXML_INCLUDE_DIRS} ${LLLOGIN_INCLUDE_DIRS} @@ -205,6 +208,7 @@ set(viewer_SOURCE_FILES llfilteredwearablelist.cpp llfirstuse.cpp llflexibleobject.cpp + llfloater360capture.cpp llfloaterabout.cpp llfloaterbvhpreview.cpp llfloateraddpaymentmethod.cpp @@ -279,7 +283,7 @@ set(viewer_SOURCE_FILES llfloaternamedesc.cpp llfloaternotificationsconsole.cpp llfloaternotificationstabbed.cpp - llfloateroutfitphotopreview.cpp + llfloateroutfitphotopreview.cpp llfloateroutfitsnapshot.cpp llfloaterobjectweights.cpp llfloateropenobject.cpp @@ -845,6 +849,7 @@ set(viewer_HEADER_FILES llfilteredwearablelist.h llfirstuse.h llflexibleobject.h + llfloater360capture.h llfloaterabout.h llfloaterbvhpreview.h llfloateraddpaymentmethod.h @@ -1383,7 +1388,7 @@ file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/viewer_version.txt" "${VIEWER_SHORT_VERSION}.${VIEWER_VERSION_REVISION}\n") set_source_files_properties( - llversioninfo.cpp tests/llversioninfo_test.cpp + llversioninfo.cpp tests/llversioninfo_test.cpp PROPERTIES COMPILE_DEFINITIONS "${VIEWER_CHANNEL_VERSION_DEFINES}" # see BuildVersion.cmake ) @@ -2004,7 +2009,7 @@ endif (WINDOWS) # one of these being libz where you can find four or more versions in play # at once. On Linux, libz can be found at link and run time via a number # of paths: -# +# # => -lfreetype # => libz.so.1 (on install machine, not build) # => -lSDL @@ -2035,7 +2040,7 @@ target_link_libraries(${VIEWER_BINARY_NAME} ${LLRENDER_LIBRARIES} ${FREETYPE_LIBRARIES} ${LLUI_LIBRARIES} - ${LLVFS_LIBRARIES} + ${LLFILESYSTEM_LIBRARIES} ${LLWINDOW_LIBRARIES} ${LLXML_LIBRARIES} ${LLMATH_LIBRARIES} @@ -2175,7 +2180,7 @@ if (DARWIN) # https://blog.kitware.com/upcoming-in-cmake-2-8-12-osx-rpath-support/ set(CMAKE_MACOSX_RPATH 1) - + set_target_properties( ${VIEWER_BINARY_NAME} PROPERTIES @@ -2377,7 +2382,7 @@ if (LL_TESTS) llworldmap.cpp llworldmipmap.cpp PROPERTIES - LL_TEST_ADDITIONAL_SOURCE_FILES + LL_TEST_ADDITIONAL_SOURCE_FILES tests/llviewertexture_stub.cpp #llviewertexturelist.cpp ) @@ -2411,7 +2416,7 @@ if (LL_TESTS) llworldmap.cpp llworldmipmap.cpp PROPERTIES - LL_TEST_ADDITIONAL_SOURCE_FILES + LL_TEST_ADDITIONAL_SOURCE_FILES tests/llviewertexture_stub.cpp #llviewertexturelist.cpp LL_TEST_ADDITIONAL_LIBRARIES "${BOOST_SYSTEM_LIBRARY}" @@ -2458,7 +2463,7 @@ if (LL_TESTS) set(test_libs ${LLMESSAGE_LIBRARIES} ${WINDOWS_LIBRARIES} - ${LLVFS_LIBRARIES} + ${LLFILESYSTEM_LIBRARIES} ${LLMATH_LIBRARIES} ${LLCOMMON_LIBRARIES} ${GOOGLEMOCK_LIBRARIES} @@ -2473,7 +2478,7 @@ if (LL_TESTS) set(test_libs ${WINDOWS_LIBRARIES} - ${LLVFS_LIBRARIES} + ${LLFILESYSTEM_LIBRARIES} ${LLMATH_LIBRARIES} ${LLCOMMON_LIBRARIES} ${LLMESSAGE_LIBRARIES} diff --git a/indra/newview/VIEWER_VERSION.txt b/indra/newview/VIEWER_VERSION.txt index a194c18e86..5e3ec53ea6 100644 --- a/indra/newview/VIEWER_VERSION.txt +++ b/indra/newview/VIEWER_VERSION.txt @@ -1 +1 @@ -6.5.1 +6.5.2 diff --git a/indra/newview/app_settings/commands.xml b/indra/newview/app_settings/commands.xml index d0480ca47e..3dfe3f6634 100644 --- a/indra/newview/app_settings/commands.xml +++ b/indra/newview/app_settings/commands.xml @@ -276,4 +276,15 @@ is_running_function="Floater.IsOpen" is_running_parameters="my_environments" /> + <command name="360capture" + available_in_toybox="true" + is_flashing_allowed="true" + icon="Command_360_Capture_Icon" + label_ref="Command_360_Capture_Label" + tooltip_ref="Command_360_Capture_Tooltip" + execute_function="Floater.ToggleOrBringToFront" + execute_parameters="360capture" + is_running_function="Floater.IsOpen" + is_running_parameters="360capture" + /> </commands> diff --git a/indra/newview/app_settings/settings.xml b/indra/newview/app_settings/settings.xml index eeb7e6f0aa..12f435f931 100644 --- a/indra/newview/app_settings/settings.xml +++ b/indra/newview/app_settings/settings.xml @@ -1362,6 +1362,39 @@ <key>Value</key> <integer>23</integer> </map> + <key>EnableDiskCacheDebugInfo</key> + <map> + <key>Comment</key> + <string>When set, display additional cache debugging information</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>0</integer> + </map> + <key>DiskCachePercentOfTotal</key> + <map> + <key>Comment</key> + <string>The percent of total cache size (defined by CacheSize) to use for the disk cache</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>F32</string> + <key>Value</key> + <real>20.0</real> + </map> + <key>DiskCacheDirName</key> + <map> + <key>Comment</key> + <string>The name of the disk cache (within the standard Viewer disk cache directory)</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>String</string> + <key>Value</key> + <string>cache</string> + </map> <key>CacheLocation</key> <map> <key>Comment</key> @@ -2077,6 +2110,28 @@ <key>Value</key> <integer>1</integer> </map> + <key>BrowserFileAccessFromFileUrls</key> + <map> + <key>Comment</key> + <string>Allow access to local files via file urls in the embedded browser</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>1</integer> + </map> + <key>BrowserPluginsEnabled</key> + <map> + <key>Comment</key> + <string>Enable Web plugins in the built-in Web browser?</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>1</integer> + </map> <key>ChatBarCustomWidth</key> <map> <key>Comment</key> @@ -2826,17 +2881,6 @@ <key>Value</key> <integer>-1</integer> </map> - <key>DebugStatModeVFSPendingOps</key> - <map> - <key>Comment</key> - <string>Mode of stat in Statistics floater</string> - <key>Persist</key> - <integer>1</integer> - <key>Type</key> - <string>S32</string> - <key>Value</key> - <integer>-1</integer> - </map> <key>DebugStatModeTimeDialation</key> <map> <key>Comment</key> @@ -3541,7 +3585,7 @@ <key>Value</key> <integer>0</integer> </map> - <key>DoubleClickTeleport</key> + <key>DoubleClickTeleport</key> <map> <key>Comment</key> <string>Enable double-click to teleport where allowed (afects minimap and people panel)</string> @@ -3629,17 +3673,6 @@ <key>Value</key> <integer>4</integer> </map> - <key>DumpVFSCaches</key> - <map> - <key>Comment</key> - <string>Dump VFS caches on startup.</string> - <key>Persist</key> - <integer>1</integer> - <key>Type</key> - <string>Boolean</string> - <key>Value</key> - <integer>0</integer> - </map> <key>DynamicCameraStrength</key> <map> <key>Comment</key> @@ -8873,7 +8906,7 @@ <key>Value</key> <integer>0</integer> </map> - <key>RenderHiDPI</key> + <key>RenderHiDPI</key> <map> <key>Comment</key> <string>Enable support for HiDPI displays, like Retina (MacOS X ONLY, requires restart)</string> @@ -11595,7 +11628,7 @@ <string>Boolean</string> <key>Value</key> <integer>0</integer> - </map> + </map> <key>NearbyListShowMap</key> <map> <key>Comment</key> @@ -14285,28 +14318,6 @@ <key>Value</key> <string/> </map> - <key>VFSOldSize</key> - <map> - <key>Comment</key> - <string>[DO NOT MODIFY] Controls resizing of local file cache</string> - <key>Persist</key> - <integer>1</integer> - <key>Type</key> - <string>U32</string> - <key>Value</key> - <integer>0</integer> - </map> - <key>VFSSalt</key> - <map> - <key>Comment</key> - <string>[DO NOT MODIFY] Controls local file caching behavior</string> - <key>Persist</key> - <integer>1</integer> - <key>Type</key> - <string>U32</string> - <key>Value</key> - <integer>1</integer> - </map> <key>VelocityInterpolate</key> <map> <key>Comment</key> @@ -16681,9 +16692,95 @@ <key>Type</key> <string>Boolean</string> <key>Value</key> - <integer>1</integer> + <integer>1</integer> + </map> + <key>360CaptureUseInterestListCap</key> + <map> + <key>Comment</key> + <string>Flag if set, uses the new InterestList cap to ask the simulator for full content</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>1</integer> + </map> + <key>360CaptureJPEGEncodeQuality</key> + <map> + <key>Comment</key> + <string>Quality value to use in the JPEG encoder (0..100)</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>U32</string> + <key>Value</key> + <integer>95</integer> + </map> + <key>360CaptureDebugSaveImage</key> + <map> + <key>Comment</key> + <string>Flag if set, saves off each cube map as an image, as well as the JavaScript data URL, for debugging purposes</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>0</integer> + </map> + <key>360CaptureOutputImageWidth</key> + <map> + <key>Comment</key> + <string>Width of the output 360 equirectangular image</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>U32</string> + <key>Value</key> + <integer>4096</integer> + </map> + <key>360CaptureHideAvatars</key> + <map> + <key>Comment</key> + <string>Flag if set, removes all the avatars from the 360 snapshot</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>0</integer> </map> + <key>360CaptureCameraFOV</key> + <map> + <key>Comment</key> + <string>Field of view of the WebGL camera that converts the cubemap to an equirectangular image</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>U32</string> + <key>Value</key> + <integer>75</integer> + </map> + <key>360CaptureNumRenderPasses</key> + <map> + <key>Comment</key> + <string>Number of times to render the scene while taking a snapshot</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>U32</string> + <key>Value</key> + <integer>3</integer> + </map> + <key>ResetUIScaleOnFirstRun</key> + <map> + <key>Comment</key> + <string>Resets the UI scale factor on first run due to changed display scaling behavior</string> + <key>Persist</key> + <integer>1</integer> + <key>Type</key> + <string>Boolean</string> + <key>Value</key> + <integer>1</integer> + </map> </map> </llsd> - - diff --git a/indra/newview/app_settings/static_data.db2 b/indra/newview/app_settings/static_data.db2 Binary files differdeleted file mode 100644 index f85aa81601..0000000000 --- a/indra/newview/app_settings/static_data.db2 +++ /dev/null diff --git a/indra/newview/app_settings/static_index.db2 b/indra/newview/app_settings/static_index.db2 Binary files differdeleted file mode 100644 index a5440f96f2..0000000000 --- a/indra/newview/app_settings/static_index.db2 +++ /dev/null diff --git a/indra/newview/llagent.cpp b/indra/newview/llagent.cpp index 389448654a..50e0d1d935 100644 --- a/indra/newview/llagent.cpp +++ b/indra/newview/llagent.cpp @@ -2895,7 +2895,7 @@ bool LLAgent::requestGetCapability(const std::string &capName, httpCallback_t cb { std::string url; - url = getRegion()->getCapability(capName); + url = getRegionCapability(capName); if (url.empty()) { @@ -4636,23 +4636,19 @@ void LLAgent::requestAgentUserInfoCoro(std::string capurl) return; } - bool im_via_email; - bool is_verified_email; std::string email; std::string dir_visibility; - im_via_email = result["im_via_email"].asBoolean(); - is_verified_email = result["is_verified"].asBoolean(); email = result["email"].asString(); dir_visibility = result["directory_visibility"].asString(); // TODO: This should probably be changed. I'm not entirely comfortable // having LLAgent interact directly with the UI in this way. - LLFloaterPreference::updateUserInfo(dir_visibility, im_via_email, is_verified_email); + LLFloaterPreference::updateUserInfo(dir_visibility); LLFloaterSnapshot::setAgentEmail(email); } -void LLAgent::sendAgentUpdateUserInfo(bool im_via_email, const std::string& directory_visibility) +void LLAgent::sendAgentUpdateUserInfo(const std::string& directory_visibility) { std::string cap; @@ -4665,16 +4661,16 @@ void LLAgent::sendAgentUpdateUserInfo(bool im_via_email, const std::string& dire if (!cap.empty()) { LLCoros::instance().launch("updateAgentUserInfoCoro", - boost::bind(&LLAgent::updateAgentUserInfoCoro, this, cap, im_via_email, directory_visibility)); + boost::bind(&LLAgent::updateAgentUserInfoCoro, this, cap, directory_visibility)); } else { - sendAgentUpdateUserInfoMessage(im_via_email, directory_visibility); + sendAgentUpdateUserInfoMessage(directory_visibility); } } -void LLAgent::updateAgentUserInfoCoro(std::string capurl, bool im_via_email, std::string directory_visibility) +void LLAgent::updateAgentUserInfoCoro(std::string capurl, std::string directory_visibility) { LLCore::HttpRequest::policy_t httpPolicy(LLCore::HttpRequest::DEFAULT_POLICY_ID); LLCoreHttpUtil::HttpCoroutineAdapter::ptr_t @@ -4685,8 +4681,8 @@ void LLAgent::updateAgentUserInfoCoro(std::string capurl, bool im_via_email, std httpOpts->setFollowRedirects(true); LLSD body(LLSDMap - ("dir_visibility", LLSD::String(directory_visibility)) - ("im_via_email", LLSD::Boolean(im_via_email))); + ("dir_visibility", LLSD::String(directory_visibility))); + LLSD result = httpAdapter->postAndSuspend(httpRequest, capurl, body, httpOpts, httpHeaders); @@ -4714,14 +4710,13 @@ void LLAgent::sendAgentUserInfoRequestMessage() sendReliableMessage(); } -void LLAgent::sendAgentUpdateUserInfoMessage(bool im_via_email, const std::string& directory_visibility) +void LLAgent::sendAgentUpdateUserInfoMessage(const std::string& directory_visibility) { gMessageSystem->newMessageFast(_PREHASH_UpdateUserInfo); gMessageSystem->nextBlockFast(_PREHASH_AgentData); gMessageSystem->addUUIDFast(_PREHASH_AgentID, getID()); gMessageSystem->addUUIDFast(_PREHASH_SessionID, getSessionID()); gMessageSystem->nextBlockFast(_PREHASH_UserData); - gMessageSystem->addBOOLFast(_PREHASH_IMViaEMail, im_via_email); gMessageSystem->addString("DirectoryVisibility", directory_visibility); gAgent.sendReliableMessage(); diff --git a/indra/newview/llagent.h b/indra/newview/llagent.h index 134540c6b3..498bea3c07 100644 --- a/indra/newview/llagent.h +++ b/indra/newview/llagent.h @@ -928,14 +928,14 @@ public: void sendAgentUserInfoRequest(); // IM to Email and Online visibility - void sendAgentUpdateUserInfo(bool im_to_email, const std::string& directory_visibility); + void sendAgentUpdateUserInfo(const std::string& directory_visibility); private: void requestAgentUserInfoCoro(std::string capurl); - void updateAgentUserInfoCoro(std::string capurl, bool im_via_email, std::string directory_visibility); + void updateAgentUserInfoCoro(std::string capurl, std::string directory_visibility); // DEPRECATED: may be removed when User Info cap propagates void sendAgentUserInfoRequestMessage(); - void sendAgentUpdateUserInfoMessage(bool im_via_email, const std::string& directory_visibility); + void sendAgentUpdateUserInfoMessage(const std::string& directory_visibility); //-------------------------------------------------------------------- // Receive diff --git a/indra/newview/llappviewer.cpp b/indra/newview/llappviewer.cpp index f668dc754d..c9d852686e 100644 --- a/indra/newview/llappviewer.cpp +++ b/indra/newview/llappviewer.cpp @@ -101,6 +101,7 @@ #include "lllogininstance.h" #include "llprogressview.h" #include "llvocache.h" +#include "lldiskcache.h" #include "llvopartgroup.h" #include "llweb.h" #include "llfloatertexturefetchdebugger.h" @@ -118,8 +119,6 @@ #include "llprimitive.h" #include "llurlaction.h" #include "llurlentry.h" -#include "llvfile.h" -#include "llvfsthread.h" #include "llvolumemgr.h" #include "llxfermanager.h" #include "llphysicsextensions.h" @@ -343,9 +342,6 @@ bool gUseWireframe = FALSE; //use for remember deferred mode in wireframe switch bool gInitialDeferredModeForWireframe = FALSE; -// VFS globals - see llappviewer.h -LLVFS* gStaticVFS = NULL; - LLMemoryInfo gSysMemory; U64Bytes gMemoryAllocated(0); // updated in display_stats() in llviewerdisplay.cpp @@ -434,12 +430,6 @@ void init_default_trans_args() default_trans_args.insert("create_account_url"); } -//---------------------------------------------------------------------------- -// File scope definitons -const char *VFS_DATA_FILE_BASE = "data.db2.x."; -const char *VFS_INDEX_FILE_BASE = "index.db2.x."; - - struct SettingsFile : public LLInitParam::Block<SettingsFile> { Mandatory<std::string> name; @@ -608,10 +598,10 @@ static void settings_to_globals() static void settings_modify() { - LLRenderTarget::sUseFBO = gSavedSettings.getBOOL("RenderDeferred"); LLPipeline::sRenderTransparentWater = gSavedSettings.getBOOL("RenderTransparentWater"); LLPipeline::sRenderBump = gSavedSettings.getBOOL("RenderObjectBump"); - LLPipeline::sRenderDeferred = LLPipeline::sRenderTransparentWater && LLPipeline::sRenderBump && gSavedSettings.getBOOL("RenderDeferred"); + LLPipeline::sRenderDeferred = LLPipeline::sRenderTransparentWater && LLPipeline::sRenderBump && gSavedSettings.getBOOL("RenderDeferred"); + LLRenderTarget::sUseFBO = LLPipeline::sRenderDeferred && gSavedSettings.getBOOL("RenderAvatarVP"); LLVOSurfacePatch::sLODFactor = gSavedSettings.getF32("RenderTerrainLODFactor"); LLVOSurfacePatch::sLODFactor *= LLVOSurfacePatch::sLODFactor; //square lod factor to get exponential range of [1,4] gDebugGL = gSavedSettings.getBOOL("RenderDebugGL") || gDebugSession; @@ -667,6 +657,7 @@ LLAppViewer* LLAppViewer::sInstance = NULL; LLTextureCache* LLAppViewer::sTextureCache = NULL; LLImageDecodeThread* LLAppViewer::sImageDecodeThread = NULL; LLTextureFetch* LLAppViewer::sTextureFetch = NULL; +LLPurgeDiskCacheThread* LLAppViewer::sPurgeDiskCacheThread = NULL; std::string getRuntime() { @@ -963,10 +954,6 @@ bool LLAppViewer::init() // *Note: this is where gViewerStats used to be created. - // - // Initialize the VFS, and gracefully handle initialization errors - // - if (!initCache()) { LL_WARNS("InitInfo") << "Failed to init cache" << LL_ENDL; @@ -1380,7 +1367,6 @@ static LLTrace::BlockTimerStatHandle FTM_TEXTURE_CACHE("Texture Cache"); static LLTrace::BlockTimerStatHandle FTM_DECODE("Image Decode"); static LLTrace::BlockTimerStatHandle FTM_FETCH("Image Fetch"); -static LLTrace::BlockTimerStatHandle FTM_VFS("VFS Thread"); static LLTrace::BlockTimerStatHandle FTM_LFS("LFS Thread"); static LLTrace::BlockTimerStatHandle FTM_PAUSE_THREADS("Pause Threads"); static LLTrace::BlockTimerStatHandle FTM_IDLE("Idle"); @@ -1619,17 +1605,13 @@ bool LLAppViewer::doFrame() work_pending += updateTextureThreads(max_time); { - LL_RECORD_BLOCK_TIME(FTM_VFS); - io_pending += LLVFSThread::updateClass(1); - } - { LL_RECORD_BLOCK_TIME(FTM_LFS); io_pending += LLLFSThread::updateClass(1); } if (io_pending > 1000) { - ms_sleep(llmin(io_pending/100,100)); // give the vfs some time to catch up + ms_sleep(llmin(io_pending/100,100)); // give the lfs some time to catch up } total_work_pending += work_pending ; @@ -1646,7 +1628,6 @@ bool LLAppViewer::doFrame() } if(!total_io_pending) //pause file threads if nothing to process. { - LLVFSThread::sLocal->pause(); LLLFSThread::sLocal->pause(); } @@ -1711,12 +1692,11 @@ S32 LLAppViewer::updateTextureThreads(F32 max_time) return work_pending; } -void LLAppViewer::flushVFSIO() +void LLAppViewer::flushLFSIO() { while (1) { - S32 pending = LLVFSThread::updateClass(0); - pending += LLLFSThread::updateClass(0); + S32 pending = LLLFSThread::updateClass(0); if (!pending) { break; @@ -1808,7 +1788,7 @@ bool LLAppViewer::cleanup() LLKeyframeDataCache::clear(); - // End TransferManager before deleting systems it depends on (Audio, VFS, AssetStorage) + // End TransferManager before deleting systems it depends on (Audio, AssetStorage) #if 0 // this seems to get us stuck in an infinite loop... gTransferManager.cleanup(); #endif @@ -1875,8 +1855,8 @@ bool LLAppViewer::cleanup() LL_INFOS() << "Cache files removed" << LL_ENDL; - // Wait for any pending VFS IO - flushVFSIO(); + // Wait for any pending LFS IO + flushLFSIO(); LL_INFOS() << "Shutting down Views" << LL_ENDL; // Destroy the UI @@ -1960,15 +1940,6 @@ bool LLAppViewer::cleanup() SUBSYSTEM_CLEANUP(LLWorldMapView); SUBSYSTEM_CLEANUP(LLFolderViewItem); - // - // Shut down the VFS's AFTER the decode manager cleans up (since it cleans up vfiles). - // Also after viewerwindow is deleted, since it may have image pointers (which have vfiles) - // Also after shutting down the messaging system since it has VFS dependencies - - // - LL_INFOS() << "Cleaning up VFS" << LL_ENDL; - SUBSYSTEM_CLEANUP(LLVFile); - LL_INFOS() << "Saving Data" << LL_ENDL; // Store the time of our current logoff @@ -2057,7 +2028,6 @@ bool LLAppViewer::cleanup() pending += LLAppViewer::getTextureCache()->update(1); // unpauses the worker thread pending += LLAppViewer::getImageDecodeThread()->update(1); // unpauses the image thread pending += LLAppViewer::getTextureFetch()->update(1); // unpauses the texture fetch thread - pending += LLVFSThread::updateClass(0); pending += LLLFSThread::updateClass(0); F64 idle_time = idleTimer.getElapsedTimeF64(); if(!pending) @@ -2085,6 +2055,7 @@ bool LLAppViewer::cleanup() sTextureFetch->shutdown(); sTextureCache->shutdown(); sImageDecodeThread->shutdown(); + sPurgeDiskCacheThread->shutdown(); sTextureFetch->shutDownTextureCacheThread() ; sTextureFetch->shutDownImageDecodeThread() ; @@ -2107,6 +2078,8 @@ bool LLAppViewer::cleanup() sImageDecodeThread = NULL; delete mFastTimerLogThread; mFastTimerLogThread = NULL; + delete sPurgeDiskCacheThread; + sPurgeDiskCacheThread = NULL; if (LLFastTimerView::sAnalyzePerformance) { @@ -2132,28 +2105,11 @@ bool LLAppViewer::cleanup() gTextureList.shutdown(); // shutdown again in case a callback added something LLUIImageList::getInstance()->cleanUp(); - // This should eventually be done in LLAppViewer SUBSYSTEM_CLEANUP(LLImage); - SUBSYSTEM_CLEANUP(LLVFSThread); SUBSYSTEM_CLEANUP(LLLFSThread); -#ifndef LL_RELEASE_FOR_DOWNLOAD - LL_INFOS() << "Auditing VFS" << LL_ENDL; - if(gVFS) - { - gVFS->audit(); - } -#endif - LL_INFOS() << "Misc Cleanup" << LL_ENDL; - // For safety, the LLVFS has to be deleted *after* LLVFSThread. This should be cleaned up. - // (LLVFS doesn't know about LLVFSThread so can't kill pending requests) -Steve - delete gStaticVFS; - gStaticVFS = NULL; - delete gVFS; - gVFS = NULL; - gSavedSettings.cleanup(); LLUIColorTable::instance().clear(); @@ -2213,7 +2169,6 @@ bool LLAppViewer::initThreads() LLImage::initClass(gSavedSettings.getBOOL("TextureNewByteRange"),gSavedSettings.getS32("TextureReverseByteRange")); - LLVFSThread::initClass(enable_threads && false); LLLFSThread::initClass(enable_threads && false); // Image decoding @@ -2223,6 +2178,7 @@ bool LLAppViewer::initThreads() sImageDecodeThread, enable_threads && true, app_metrics_qa_mode); + LLAppViewer::sPurgeDiskCacheThread = new LLPurgeDiskCacheThread(); if (LLTrace::BlockTimer::sLog || LLTrace::BlockTimer::sMetricLog) { @@ -3240,10 +3196,6 @@ LLSD LLAppViewer::getViewerInfo() const info["GPU_SHADERS"] = gSavedSettings.getBOOL("RenderDeferred") ? "Enabled" : "Disabled"; info["TEXTURE_MEMORY"] = gSavedSettings.getS32("TextureMemory"); - LLSD substitution; - substitution["datetime"] = (S32)(gVFS ? gVFS->creationTime() : 0); - info["VFS_TIME"] = LLTrans::getString("AboutTime", substitution); - #if LL_DARWIN info["HIDPI"] = gHiDPISupport; #endif @@ -3335,6 +3287,9 @@ LLSD LLAppViewer::getViewerInfo() const info["SERVER_RELEASE_NOTES_URL"] = mServerReleaseNotesURL; } + // populate field for new local disk cache with some details + info["DISK_CACHE_INFO"] = LLDiskCache::getInstance()->getCacheInfo(); + return info; } @@ -4013,7 +3968,7 @@ void LLAppViewer::forceQuit() void LLAppViewer::fastQuit(S32 error_code) { // finish pending transfers - flushVFSIO(); + flushLFSIO(); // let sim know we're logging out sendLogoutRequest(); // flush network buffers by shutting down messaging system @@ -4202,44 +4157,14 @@ void LLAppViewer::migrateCacheDirectory() #endif // LL_WINDOWS || LL_DARWIN } -void dumpVFSCaches() -{ - LL_INFOS() << "======= Static VFS ========" << LL_ENDL; - gStaticVFS->listFiles(); -#if LL_WINDOWS - LL_INFOS() << "======= Dumping static VFS to StaticVFSDump ========" << LL_ENDL; - WCHAR w_str[MAX_PATH]; - GetCurrentDirectory(MAX_PATH, w_str); - S32 res = LLFile::mkdir("StaticVFSDump"); - if (res == -1) - { - LL_WARNS() << "Couldn't create dir StaticVFSDump" << LL_ENDL; - } - SetCurrentDirectory(utf8str_to_utf16str("StaticVFSDump").c_str()); - gStaticVFS->dumpFiles(); - SetCurrentDirectory(w_str); -#endif - - LL_INFOS() << "========= Dynamic VFS ====" << LL_ENDL; - gVFS->listFiles(); -#if LL_WINDOWS - LL_INFOS() << "========= Dumping dynamic VFS to VFSDump ====" << LL_ENDL; - res = LLFile::mkdir("VFSDump"); - if (res == -1) - { - LL_WARNS() << "Couldn't create dir VFSDump" << LL_ENDL; - } - SetCurrentDirectory(utf8str_to_utf16str("VFSDump").c_str()); - gVFS->dumpFiles(); - SetCurrentDirectory(w_str); -#endif -} - //static U32 LLAppViewer::getTextureCacheVersion() { - //viewer texture cache version, change if the texture cache format changes. - const U32 TEXTURE_CACHE_VERSION = 8; + // Viewer texture cache version, change if the texture cache format changes. + // 2021-03-10 Bumping up by one to help obviate texture cache issues with + // Simple Cache Viewer - see SL-14985 for more information + //const U32 TEXTURE_CACHE_VERSION = 8; + const U32 TEXTURE_CACHE_VERSION = 9; return TEXTURE_CACHE_VERSION ; } @@ -4261,6 +4186,17 @@ bool LLAppViewer::initCache() LLAppViewer::getTextureCache()->setReadOnly(read_only) ; LLVOCache::initParamSingleton(read_only); + // initialize the new disk cache using saved settings + const std::string cache_dir_name = gSavedSettings.getString("DiskCacheDirName"); + + // note that the maximum size of this cache is defined as a percentage of the + // total cache size - the 'CacheSize' pref - for all caches. + const unsigned int cache_total_size_mb = gSavedSettings.getU32("CacheSize"); + const double disk_cache_percent = gSavedSettings.getF32("DiskCachePercentOfTotal"); + const unsigned int disk_cache_mb = cache_total_size_mb * disk_cache_percent / 100; + const uintmax_t disk_cache_bytes = disk_cache_mb * 1024 * 1024; + const bool enable_cache_debug_info = gSavedSettings.getBOOL("EnableDiskCacheDebugInfo"); + bool texture_cache_mismatch = false; if (gSavedSettings.getS32("LocalCacheVersion") != LLAppViewer::getTextureCacheVersion()) { @@ -4295,6 +4231,7 @@ bool LLAppViewer::initCache() LL_INFOS("AppCache") << "Cache location changed, cache needs purging" << LL_ENDL; gDirUtilp->setCacheDir(gSavedSettings.getString("CacheLocation")); purgeCache(); // purge old cache + gDirUtilp->deleteDirAndContents(gDirUtilp->getExpandedFilename(LL_PATH_CACHE, cache_dir_name)); gSavedSettings.setString("CacheLocation", new_cache_location); gSavedSettings.setString("CacheLocationTopFolder", gDirUtilp->getBaseFileName(new_cache_location)); } @@ -4307,11 +4244,26 @@ bool LLAppViewer::initCache() gSavedSettings.setString("CacheLocationTopFolder", ""); } - if (mPurgeCache && !read_only) + const std::string cache_dir = gDirUtilp->getExpandedFilename(LL_PATH_CACHE, cache_dir_name); + LLDiskCache::initParamSingleton(cache_dir, disk_cache_bytes, enable_cache_debug_info); + + if (!read_only) { - LLSplashScreen::update(LLTrans::getString("StartupClearingCache")); - purgeCache(); + if (mPurgeCache) + { + LLSplashScreen::update(LLTrans::getString("StartupClearingCache")); + purgeCache(); + + // clear the new C++ file system based cache + LLDiskCache::getInstance()->clearCache(); + } + else + { + // purge excessive files from the new file system based cache + LLDiskCache::getInstance()->purge(); + } } + LLAppViewer::getPurgeDiskCacheThread()->start(); LLSplashScreen::update(LLTrans::getString("StartupInitializingTextureCache")); @@ -4320,172 +4272,18 @@ bool LLAppViewer::initCache() const S32 MB = 1024 * 1024; const S64 MIN_CACHE_SIZE = 256 * MB; const S64 MAX_CACHE_SIZE = 9984ll * MB; - const S64 MAX_VFS_SIZE = 1024 * MB; // 1 GB S64 cache_size = (S64)(gSavedSettings.getU32("CacheSize")) * MB; cache_size = llclamp(cache_size, MIN_CACHE_SIZE, MAX_CACHE_SIZE); - S64 vfs_size = llmin((S64)((cache_size * 2) / 10), MAX_VFS_SIZE); - S64 texture_cache_size = cache_size - vfs_size; + S64 texture_cache_size = cache_size; S64 extra = LLAppViewer::getTextureCache()->initCache(LL_PATH_CACHE, texture_cache_size, texture_cache_mismatch); texture_cache_size -= extra; - LLVOCache::getInstance()->initCache(LL_PATH_CACHE, gSavedSettings.getU32("CacheNumberOfRegionsForObjects"), getObjectCacheVersion()); - LLSplashScreen::update(LLTrans::getString("StartupInitializingVFS")); - - // Init the VFS - vfs_size = llmin(vfs_size + extra, MAX_VFS_SIZE); - vfs_size = (vfs_size / MB) * MB; // make sure it is MB aligned - U32 vfs_size_u32 = (U32)vfs_size; - U32 old_vfs_size = gSavedSettings.getU32("VFSOldSize") * MB; - bool resize_vfs = (vfs_size_u32 != old_vfs_size); - if (resize_vfs) - { - gSavedSettings.setU32("VFSOldSize", vfs_size_u32 / MB); - } - LL_INFOS("AppCache") << "VFS CACHE SIZE: " << vfs_size / (1024*1024) << " MB" << LL_ENDL; - - // This has to happen BEFORE starting the vfs - // time_t ltime; - srand(time(NULL)); // Flawfinder: ignore - U32 old_salt = gSavedSettings.getU32("VFSSalt"); - U32 new_salt; - std::string old_vfs_data_file; - std::string old_vfs_index_file; - std::string new_vfs_data_file; - std::string new_vfs_index_file; - std::string static_vfs_index_file; - std::string static_vfs_data_file; - - if (gSavedSettings.getBOOL("AllowMultipleViewers")) - { - // don't mess with renaming the VFS in this case - new_salt = old_salt; - } - else - { - do - { - new_salt = rand(); - } while(new_salt == old_salt); - } - - old_vfs_data_file = gDirUtilp->getExpandedFilename(LL_PATH_CACHE, VFS_DATA_FILE_BASE) + llformat("%u", old_salt); - - // make sure this file exists - llstat s; - S32 stat_result = LLFile::stat(old_vfs_data_file, &s); - if (stat_result) - { - // doesn't exist, look for a data file - std::string mask; - mask = VFS_DATA_FILE_BASE; - mask += "*"; - - std::string dir; - dir = gDirUtilp->getExpandedFilename(LL_PATH_CACHE, ""); - - std::string found_file; - LLDirIterator iter(dir, mask); - if (iter.next(found_file)) - { - old_vfs_data_file = gDirUtilp->add(dir, found_file); - - S32 start_pos = found_file.find_last_of('.'); - if (start_pos > 0) - { - sscanf(found_file.substr(start_pos+1).c_str(), "%d", &old_salt); - } - LL_DEBUGS("AppCache") << "Default vfs data file not present, found: " << old_vfs_data_file << " Old salt: " << old_salt << LL_ENDL; - } - } - - old_vfs_index_file = gDirUtilp->getExpandedFilename(LL_PATH_CACHE, VFS_INDEX_FILE_BASE) + llformat("%u", old_salt); - - stat_result = LLFile::stat(old_vfs_index_file, &s); - if (stat_result) - { - // We've got a bad/missing index file, nukem! - LL_WARNS("AppCache") << "Bad or missing vfx index file " << old_vfs_index_file << LL_ENDL; - LL_WARNS("AppCache") << "Removing old vfs data file " << old_vfs_data_file << LL_ENDL; - LLFile::remove(old_vfs_data_file); - LLFile::remove(old_vfs_index_file); - - // Just in case, nuke any other old cache files in the directory. - std::string dir; - dir = gDirUtilp->getExpandedFilename(LL_PATH_CACHE, ""); - - std::string mask; - mask = VFS_DATA_FILE_BASE; - mask += "*"; - - gDirUtilp->deleteFilesInDir(dir, mask); - - mask = VFS_INDEX_FILE_BASE; - mask += "*"; - - gDirUtilp->deleteFilesInDir(dir, mask); - } - - new_vfs_data_file = gDirUtilp->getExpandedFilename(LL_PATH_CACHE, VFS_DATA_FILE_BASE) + llformat("%u", new_salt); - new_vfs_index_file = gDirUtilp->getExpandedFilename(LL_PATH_CACHE, VFS_INDEX_FILE_BASE) + llformat("%u", new_salt); - - static_vfs_data_file = gDirUtilp->getExpandedFilename(LL_PATH_APP_SETTINGS, "static_data.db2"); - static_vfs_index_file = gDirUtilp->getExpandedFilename(LL_PATH_APP_SETTINGS, "static_index.db2"); - - if (resize_vfs) - { - LL_DEBUGS("AppCache") << "Removing old vfs and re-sizing" << LL_ENDL; - - LLFile::remove(old_vfs_data_file); - LLFile::remove(old_vfs_index_file); - } - else if (old_salt != new_salt) - { - // move the vfs files to a new name before opening - LL_DEBUGS("AppCache") << "Renaming " << old_vfs_data_file << " to " << new_vfs_data_file << LL_ENDL; - LL_DEBUGS("AppCache") << "Renaming " << old_vfs_index_file << " to " << new_vfs_index_file << LL_ENDL; - LLFile::rename(old_vfs_data_file, new_vfs_data_file); - LLFile::rename(old_vfs_index_file, new_vfs_index_file); - } - - // Startup the VFS... - gSavedSettings.setU32("VFSSalt", new_salt); - - // Don't remove VFS after viewer crashes. If user has corrupt data, they can reinstall. JC - gVFS = LLVFS::createLLVFS(new_vfs_index_file, new_vfs_data_file, false, vfs_size_u32, false); - if (!gVFS) - { - return false; - } - - gStaticVFS = LLVFS::createLLVFS(static_vfs_index_file, static_vfs_data_file, true, 0, false); - if (!gStaticVFS) - { - return false; - } - - BOOL success = gVFS->isValid() && gStaticVFS->isValid(); - if (!success) - { - return false; - } - else - { - LLVFile::initClass(); - -#ifndef LL_RELEASE_FOR_DOWNLOAD - if (gSavedSettings.getBOOL("DumpVFSCaches")) - { - dumpVFSCaches(); - } -#endif - - return true; - } + return true; } void LLAppViewer::addOnIdleCallback(const boost::function<void()>& cb) diff --git a/indra/newview/llappviewer.h b/indra/newview/llappviewer.h index 95f6efa29a..0f06889d20 100644 --- a/indra/newview/llappviewer.h +++ b/indra/newview/llappviewer.h @@ -1,5 +1,6 @@ /** * @mainpage + * @mainpage * * This is the sources for the Second Life Viewer; * information on the open source project is at @@ -57,6 +58,7 @@ class LLImageDecodeThread; class LLTextureFetch; class LLWatchdogTimeout; class LLViewerJoystick; +class LLPurgeDiskCacheThread; class LLViewerRegion; extern LLTrace::BlockTimerStatHandle FTM_FRAME; @@ -83,7 +85,7 @@ public: virtual bool frame(); // Override for application body logic // Application control - void flushVFSIO(); // waits for vfs transfers to complete + void flushLFSIO(); // waits for lfs transfers to complete void forceQuit(); // Puts the viewer into 'shutting down without error' mode. void fastQuit(S32 error_code = 0); // Shuts down the viewer immediately after sending a logout message void requestQuit(); // Request a quit. A kinder, gentler quit. @@ -116,6 +118,7 @@ public: static LLTextureCache* getTextureCache() { return sTextureCache; } static LLImageDecodeThread* getImageDecodeThread() { return sImageDecodeThread; } static LLTextureFetch* getTextureFetch() { return sTextureFetch; } + static LLPurgeDiskCacheThread* getPurgeDiskCacheThread() { return sPurgeDiskCacheThread; } static U32 getTextureCacheVersion() ; static U32 getObjectCacheVersion() ; @@ -284,6 +287,7 @@ private: static LLTextureCache* sTextureCache; static LLImageDecodeThread* sImageDecodeThread; static LLTextureFetch* sTextureFetch; + static LLPurgeDiskCacheThread* sPurgeDiskCacheThread; S32 mNumSessions; @@ -382,12 +386,6 @@ extern BOOL gRestoreGL; extern bool gUseWireframe; extern bool gInitialDeferredModeForWireframe; -// VFS globals - gVFS is for general use -// gStaticVFS is read-only and is shipped w/ the viewer -// it has pre-cache data like the UI .TGAs -class LLVFS; -extern LLVFS *gStaticVFS; - extern LLMemoryInfo gSysMemory; extern U64Bytes gMemoryAllocated; diff --git a/indra/newview/llappviewerwin32.cpp b/indra/newview/llappviewerwin32.cpp index 5556ec8f76..ee533875b6 100644 --- a/indra/newview/llappviewerwin32.cpp +++ b/indra/newview/llappviewerwin32.cpp @@ -504,7 +504,7 @@ void LLAppViewerWin32::disableWinErrorReporting() } } -const S32 MAX_CONSOLE_LINES = 500; +const S32 MAX_CONSOLE_LINES = 7500; // Only defined in newer SDKs than we currently use #ifndef ENABLE_VIRTUAL_TERMINAL_PROCESSING #define ENABLE_VIRTUAL_TERMINAL_PROCESSING 4 diff --git a/indra/newview/llcompilequeue.cpp b/indra/newview/llcompilequeue.cpp index bf10a9f2b4..9031ea5b1b 100644 --- a/indra/newview/llcompilequeue.cpp +++ b/indra/newview/llcompilequeue.cpp @@ -52,7 +52,7 @@ #include "lldir.h" #include "llnotificationsutil.h" #include "llviewerstats.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "lluictrlfactory.h" #include "lltrans.h" @@ -116,7 +116,7 @@ namespace } // *NOTE$: A minor specialization of LLScriptAssetUpload, it does not require a buffer -// (and does not save a buffer to the vFS) and it finds the compile queue window and +// (and does not save a buffer to the cache) and it finds the compile queue window and // displays a compiling message. class LLQueuedScriptAssetUpload : public LLScriptAssetUpload { @@ -134,8 +134,8 @@ public: virtual LLSD prepareUpload() { /* *NOTE$: The parent class (LLScriptAssetUpload will attempt to save - * the script buffer into to the VFS. Since the resource is already in - * the VFS we don't want to do that. Just put a compiling message in + * the script buffer into to the cache. Since the resource is already in + * the cache we don't want to do that. Just put a compiling message in * the window and move on */ LLFloaterCompileQueue* queue = LLFloaterReg::findTypedInstance<LLFloaterCompileQueue>("compile_queue", LLSD(mQueueId)); @@ -283,11 +283,11 @@ void LLFloaterCompileQueue::handleHTTPResponse(std::string pumpName, const LLSD LLEventPumps::instance().post(pumpName, expresult); } -// *TODO: handleSCriptRetrieval is passed into the VFS via a legacy C function pointer +// *TODO: handleSCriptRetrieval is passed into the cache via a legacy C function pointer // future project would be to convert these to C++ callables (std::function<>) so that // we can use bind and remove the userData parameter. // -void LLFloaterCompileQueue::handleScriptRetrieval(LLVFS *vfs, const LLUUID& assetId, +void LLFloaterCompileQueue::handleScriptRetrieval(const LLUUID& assetId, LLAssetType::EType type, void* userData, S32 status, LLExtStat extStatus) { LLSD result(LLSD::emptyMap()); diff --git a/indra/newview/llcompilequeue.h b/indra/newview/llcompilequeue.h index adb854875a..a9bac345b5 100644 --- a/indra/newview/llcompilequeue.h +++ b/indra/newview/llcompilequeue.h @@ -135,7 +135,7 @@ protected: //bool checkAssetId(const LLUUID &assetId); static void handleHTTPResponse(std::string pumpName, const LLSD &expresult); - static void handleScriptRetrieval(LLVFS *vfs, const LLUUID& assetId, LLAssetType::EType type, void* userData, S32 status, LLExtStat extStatus); + static void handleScriptRetrieval(const LLUUID& assetId, LLAssetType::EType type, void* userData, S32 status, LLExtStat extStatus); private: static void processExperienceIdResults(LLSD result, LLUUID parent); diff --git a/indra/newview/lldrawpoolavatar.cpp b/indra/newview/lldrawpoolavatar.cpp index 687b13d2c8..eb0bd0de4e 100644 --- a/indra/newview/lldrawpoolavatar.cpp +++ b/indra/newview/lldrawpoolavatar.cpp @@ -1526,7 +1526,7 @@ void LLDrawPoolAvatar::renderAvatars(LLVOAvatar* single_avatar, S32 pass) } LLVOAvatar *attached_av = avatarp->getAttachedAvatar(); - if (attached_av && LLVOAvatar::AOA_NORMAL != attached_av->getOverallAppearance()) + if (attached_av && (LLVOAvatar::AOA_NORMAL != attached_av->getOverallAppearance() || !gPipeline.hasRenderType(LLPipeline::RENDER_TYPE_AVATAR))) { // Animesh attachment of a jellydolled or invisible parent - don't show return; diff --git a/indra/newview/llfilepicker.h b/indra/newview/llfilepicker.h index 2fc496a144..04ba4416d7 100644 --- a/indra/newview/llfilepicker.h +++ b/indra/newview/llfilepicker.h @@ -136,7 +136,7 @@ public: S32 getFileCount() const { return (S32)mFiles.size(); } - // See llvfs/lldir.h : getBaseFileName and getDirName to extract base or directory names + // see lldir.h : getBaseFileName and getDirName to extract base or directory names // clear any lists of buffers or whatever, and make sure the file // picker isn't locked. diff --git a/indra/newview/llfloater360capture.cpp b/indra/newview/llfloater360capture.cpp new file mode 100644 index 0000000000..745f154535 --- /dev/null +++ b/indra/newview/llfloater360capture.cpp @@ -0,0 +1,930 @@ +/** + * @file llfloater360capture.cpp + * @author Callum Prentice (callum@lindenlab.com) + * @brief Floater code for the 360 Capture feature + * + * $LicenseInfo:firstyear=2011&license=viewerlgpl$ + * Second Life Viewer Source Code + * Copyright (C) 2011, Linden Research, Inc. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; + * version 2.1 of the License only. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + * + * Linden Research, Inc., 945 Battery Street, San Francisco, CA 94111 USA + * $/LicenseInfo$ + */ + +#include "llviewerprecompiledheaders.h" + +#include "llfloater360capture.h" + +#include "llagent.h" +#include "llagentui.h" +#include "llbase64.h" +#include "llcallbacklist.h" +#include "llenvironment.h" +#include "llimagejpeg.h" +#include "llmediactrl.h" +#include "llradiogroup.h" +#include "llslurl.h" +#include "lltextbox.h" +#include "lltrans.h" +#include "lluictrlfactory.h" +#include "llversioninfo.h" +#include "llviewercamera.h" +#include "llviewercontrol.h" +#include "llviewerpartsim.h" +#include "llviewerregion.h" +#include "llviewerwindow.h" +#include "pipeline.h" + +#include <iterator> + +LLFloater360Capture::LLFloater360Capture(const LLSD& key) + : LLFloater(key) +{ + // The handle to embedded browser that we use to + // render the WebGL preview as we as host the + // Cube Map to Equirectangular image code + mWebBrowser = nullptr; + + // Ask the simulator to send us everything (and not just + // what it thinks the connected Viewer can see) until + // such time as we ask it not to (the dtor). If we crash or + // otherwise, exit before this is turned off, the Simulator + // will take care of cleaning up for us. + if (gSavedSettings.getBOOL("360CaptureUseInterestListCap")) + { + // send everything to us for as long as this floater is open + const bool send_everything = true; + changeInterestListMode(send_everything); + } +} + +LLFloater360Capture::~LLFloater360Capture() +{ + if (mWebBrowser) + { + mWebBrowser->navigateStop(); + mWebBrowser->clearCache(); + mWebBrowser->unloadMediaSource(); + } + + // Tell the Simulator not to send us everything anymore + // and revert to the regular "keyhole" frustum of interest + // list updates. + if (gSavedSettings.getBOOL("360CaptureUseInterestListCap")) + { + const bool send_everything = false; + changeInterestListMode(send_everything); + } +} + +BOOL LLFloater360Capture::postBuild() +{ + mCaptureBtn = getChild<LLUICtrl>("capture_button"); + mCaptureBtn->setCommitCallback(boost::bind(&LLFloater360Capture::onCapture360ImagesBtn, this)); + + mSaveLocalBtn = getChild<LLUICtrl>("save_local_button"); + mSaveLocalBtn->setCommitCallback(boost::bind(&LLFloater360Capture::onSaveLocalBtn, this)); + mSaveLocalBtn->setEnabled(false); + + mWebBrowser = getChild<LLMediaCtrl>("360capture_contents"); + mWebBrowser->addObserver(this); + + // There is a group of radio buttons that define the quality + // by each having a 'value' that is returns equal to the pixel + // size (width == height) + mQualityRadioGroup = getChild<LLRadioGroup>("360_quality_selection"); + mQualityRadioGroup->setCommitCallback(boost::bind(&LLFloater360Capture::onChooseQualityRadioGroup, this)); + + // UX/UI called for preview mode (always the first index/option) + // by default each time vs restoring the last value + mQualityRadioGroup->setSelectedIndex(0); + + // Construct a URL pointing to the first page to load. Although + // we do not use this page for anything (after some significant + // design changes), we retain the code to load the start page + // in case that changes again one day. It also makes sure the + // embedded browser is active and ready to go for when the real + // page with the 360 preview is navigated to. + std::string url = STRINGIZE( + "file:///" << + getHTMLBaseFolder() << + mDefaultHTML + ); + mWebBrowser->navigateTo(url); + + // initial pass at determining what size (width == height since + // the cube map images are square) we should capture at. + setSourceImageSize(); + + // the size of the output equirectangular image. The height of an EQR image + // is always 1/2 of the width so we should not store it but rather, + // calculate it from the width directly + mOutputImageWidth = gSavedSettings.getU32("360CaptureOutputImageWidth"); + mOutputImageHeight = mOutputImageWidth / 2; + + // enable resizing and enable for width and for height + enableResizeCtrls(true, true, true); + + // initial heading that consumers of the equirectangular image + // (such as Facebook or Flickr) use to position initial view - + // we set during capture - stored as degrees (0..359) + mInitialHeadingDeg = 0.0; + + // save directory in which to store the images (must obliviously be + // writable by the viewer). Also create it for users who haven't + // used the 360 feature before. + mImageSaveDir = gDirUtilp->getLindenUserDir() + gDirUtilp->getDirDelimiter() + "eqrimg"; + LLFile::mkdir(mImageSaveDir); + + // We do an initial capture when the floater is opened, albeit at a 'preview' + // quality level (really low resolution, but really fast) + onCapture360ImagesBtn(); + + return true; +} + +// called when the user choose a quality level using +// the buttons in the radio group +void LLFloater360Capture::onChooseQualityRadioGroup() +{ + // set the size of the captured cube map images based + // on the quality level chosen + setSourceImageSize(); +} + +// Using a new capability, tell the simulator that we want it to send everything +// it knows about and not just what is in front of the camera, in its view +// frustum. We need this feature so that the contents of the region that appears +// in the 6 snapshots which we cannot see and is normally not "considered", is +// also rendered. Typically, this is turned on when the 360 capture floater is +// opened and turned off when it is closed. +// Note: for this version, we do not have a way to determine when "everything" +// has arrived and has been rendered so for now, the proposal is that users +// will need to experiment with the low resolution version and wait for some +// (hopefully) small period of time while the full contents resolves. +// Pass in a flag to ask the simulator/interest list to "send everything" or +// not (the default mode) +void LLFloater360Capture::changeInterestListMode(bool send_everything) +{ + LLSD body; + + if (send_everything) + { + body["mode"] = LLSD::String("360"); + } + else + { + body["mode"] = LLSD::String("default"); + } + + if (gAgent.requestPostCapability("InterestList", body, [](const LLSD & response) + { + LL_INFOS("360Capture") << + "InterestList capability responded: \n" << + ll_pretty_print_sd(response) << + LL_ENDL; + })) + { + LL_INFOS("360Capture") << + "Successfully posted an InterestList capability request with payload: \n" << + ll_pretty_print_sd(body) << + LL_ENDL; + } + else + { + LL_INFOS("360Capture") << + "Unable to post an InterestList capability request with payload: \n" << + ll_pretty_print_sd(body) << + LL_ENDL; + } +} + +// There is is a setting (360CaptureSourceImageSize) that holds the size +// (width == height since it's a square) of each of the 6 source snapshots. +// However there are some known (and I dare say, some more unknown conditions +// where the specified size is not possible and this function tries to figure it +// out and change that setting to the optimal value for the current conditions. +void LLFloater360Capture::setSourceImageSize() +{ + mSourceImageSize = mQualityRadioGroup->getSelectedValue().asInteger(); + + // If deferred rendering is off, we need to shrink the window we capture + // until it's smaller than the Viewer window dimensions. + if (!LLPipeline::sRenderDeferred) + { + LLRect window_rect = gViewerWindow->getWindowRectRaw(); + S32 window_width = window_rect.getWidth(); + S32 window_height = window_rect.getHeight(); + + // It's not possible (as I had hoped) to always render to an off screen + // buffer regardless of deferred rendering status so the next best + // option is to render to a buffer that is the size of the users app + // window. Note, this was changed - before it chose the smallest + // power of 2 less than the window size - but since that meant a + // 1023 height app window would result in a 512 pixel capture, Maxim + // tried this and it does indeed appear to work. Mayb need to revisit + // after the project viewer pass if people on low end graphics systems + // after having issues. + if (mSourceImageSize > window_width || mSourceImageSize > window_height) + { + mSourceImageSize = llmin(window_width, window_height, mSourceImageSize); + LL_INFOS("360Capture") << "Deferred rendering is forcing a smaller capture size: " << mSourceImageSize << LL_ENDL; + } + + // there has to be an easier way than this to get the value + // from the radio group item at index 0. Why doesn't + // LLRadioGroup::getSelectedValue(int index) exist? + int index = mQualityRadioGroup->getSelectedIndex(); + mQualityRadioGroup->setSelectedIndex(0); + int min_size = mQualityRadioGroup->getSelectedValue().asInteger(); + mQualityRadioGroup->setSelectedIndex(index); + + // If the maximum size we can support falls below a threshold then + // we should display a message in the log so we can try to debug + // why this is happening + if (mSourceImageSize < min_size) + { + LL_INFOS("360Capture") << "Small snapshot size due to deferred rendering and small app window" << LL_ENDL; + } + } +} + +// This function shouldn't exist! We use the tooltip text from +// the corresponding XUI file (floater_360capture.xml) as the +// overlay text for the final web page to inform the user +// about the quality level in play. There ought to be a +// UI function like LLView* getSelectedItemView() or similar +// but as far as I can tell, there isn't so we have to resort +// to finding it ourselves with this icky code.. +const std::string LLFloater360Capture::getSelectedQualityTooltip() +{ + // safey (or bravery?) + if (mQualityRadioGroup != nullptr) + { + // for all the child widgets for the radio group + // (just the radio buttons themselves I think) + for (child_list_const_reverse_iter_t iter = mQualityRadioGroup->getChildList()->rbegin(); + iter != mQualityRadioGroup->getChildList()->rend(); + ++iter) + { + // if we match the selected index (which we can get easily) + // with our position in the list of children + if (mQualityRadioGroup->getSelectedIndex() == + std::distance(mQualityRadioGroup->getChildList()->rend(), iter) - 1) + { + // return the plain old tooltip text + return (*iter)->getToolTip(); + } + } + } + + // if it's not found or not available, return an empty string + return std::string(); +} + +// Some of the 'magic' happens via a web page in an HTML directory +// and this code provides a single point of reference for its' location +const std::string LLFloater360Capture::getHTMLBaseFolder() +{ + std::string folder_name = gDirUtilp->getSkinDir(); + folder_name += gDirUtilp->getDirDelimiter(); + folder_name += "html"; + folder_name += gDirUtilp->getDirDelimiter(); + folder_name += "common"; + folder_name += gDirUtilp->getDirDelimiter(); + folder_name += "equirectangular"; + folder_name += gDirUtilp->getDirDelimiter(); + + return folder_name; +} + +// triggered when the 'capture' button in the UI is pressed +void LLFloater360Capture::onCapture360ImagesBtn() +{ + // launch the main capture code in a coroutine so we can + // yield/suspend at some points to give the main UI + // thread a look-in occasionally. + LLCoros::instance().launch("capture360cap", [this]() + { + capture360Images(); + }); +} + +// Gets the full path name for a given JavaScript file in the HTML folder. We +// use this ultimately as a parameter to the main web app so it knows where to find +// the JavaScript array containing the 6 cube map images, stored as data URLs +const std::string LLFloater360Capture::makeFullPathToJS(const std::string filename) +{ + std::string full_js_path = mImageSaveDir; + full_js_path += gDirUtilp->getDirDelimiter(); + full_js_path += filename; + + return full_js_path; +} + +// Write the header/prequel portion of the JavaScript array of data urls +// that we use to store the cube map images in (so the web code can load +// them without tweaking browser security - we'd have to do this if they +// we stored as plain old images) This deliberately overwrites the old +// one, if it exists +void LLFloater360Capture::writeDataURLHeader(const std::string filename) +{ + llofstream file_handle(filename.c_str()); + if (file_handle.is_open()) + { + file_handle << "// cube map images for Second Life Viewer panorama 360 images" << std::endl; + file_handle.close(); + } +} + +// Write the footer/sequel portion of the JavaScript image code. When this is +// called, the current file on disk will contain the header and the 6 data +// URLs, each with a well specified name. This final piece of JavaScript code +// creates an array from those data URLs that the main application can +// reference and read. +void LLFloater360Capture::writeDataURLFooter(const std::string filename) +{ + llofstream file_handle(filename.c_str(), std::ios_base::app); + if (file_handle.is_open()) + { + file_handle << "var cubemap_img_js = [" << std::endl; + file_handle << " img_posx, img_negx," << std::endl; + file_handle << " img_posy, img_negy," << std::endl; + file_handle << " img_posz, img_negz," << std::endl; + file_handle << "];" << std::endl; + + file_handle.close(); + } +} + +// Given a filename, a chunk of data (representing an image file) and the size +// of the buffer, we create a BASE64 encoded string and use it to build a JavaScript +// data URL that represents the image in a web browser environment +bool LLFloater360Capture::writeDataURL(const std::string filename, const std::string prefix, U8* data, unsigned int data_len) +{ + LL_INFOS("360Capture") << "Writing data URL for " << prefix << " to " << filename << LL_ENDL; + + const std::string data_url = LLBase64::encode(data, data_len); + + llofstream file_handle(filename.c_str(), std::ios_base::app); + if (file_handle.is_open()) + { + file_handle << "var img_"; + file_handle << prefix; + file_handle << " = '"; + file_handle << "data:image/jpeg; base64,"; + file_handle << data_url; + file_handle << "'"; + file_handle << std::endl; + file_handle.close(); + + return true; + } + + return false; +} + +// Encode the image from each of the 6 snapshots and save it out to +// the JavaScript array of data URLs +void LLFloater360Capture::encodeAndSave(LLPointer<LLImageRaw> raw_image, const std::string filename, const std::string prefix) +{ + // the default quality for the JPEG encoding is set quite high + // but this still seems to be a reasonable compromise for + // quality/size and is still much smaller than equivalent PNGs + int jpeg_encode_quality = gSavedSettings.getU32("360CaptureJPEGEncodeQuality"); + LLPointer<LLImageJPEG> jpeg_image = new LLImageJPEG(jpeg_encode_quality); + + // Actually encode the JPEG image. This is where a lot of time + // is spent now that the snapshot capture process has been + // optimized. The encode_time parameter doesn't appear to be + // used anymore. + const int encode_time = 0; + bool resultjpeg = jpeg_image->encode(raw_image, encode_time); + + if (resultjpeg) + { + // save individual cube map images as real JPEG files + // for debugging or curiosity) based on debug settings + if (gSavedSettings.getBOOL("360CaptureDebugSaveImage")) + { + const std::string jpeg_filename = STRINGIZE( + gDirUtilp->getLindenUserDir() << + gDirUtilp->getDirDelimiter() << + "eqrimg" << + gDirUtilp->getDirDelimiter() << + prefix << + "." << + jpeg_image->getExtension() + ); + + LL_INFOS("360Capture") << "Saving debug JPEG image as " << jpeg_filename << LL_ENDL; + jpeg_image->save(jpeg_filename); + } + + // actually write the JPEG image to disk as a data URL + writeDataURL(filename, prefix, jpeg_image->getData(), jpeg_image->getDataSize()); + } +} + +// Defer back to the main loop for a single rendered frame to give +// the renderer a chance to update the UI if it is needed +void LLFloater360Capture::suspendForAFrame() +{ + const U32 frame_count_delta = 1; + U32 curr_frame_count = LLFrameTimer::getFrameCount(); + while (LLFrameTimer::getFrameCount() <= curr_frame_count + frame_count_delta) + { + llcoro::suspend(); + } +} + +// A debug version of the snapshot code that simply fills the +// buffer with a pattern that can be used to investigate +// issues with encoding and saving off each RAW image. +// Probably not needed anymore but saving here just in case. +void LLFloater360Capture::mockSnapShot(LLImageRaw* raw) +{ + unsigned int width = raw->getWidth(); + unsigned int height = raw->getHeight(); + unsigned int depth = raw->getComponents(); + unsigned char* pixels = raw->getData(); + + for (int y = 0; y < height; y++) + { + for (int x = 0; x < width; x++) + { + unsigned long offset = y * width * depth + x * depth; + unsigned char red = x * 256 / width; + unsigned char green = y * 256 / height; + unsigned char blue = ((x + y) / 2) * 256 / (width + height) / 2; + pixels[offset + 0] = red; + pixels[offset + 1] = green; + pixels[offset + 2] = blue; + } + } +} + +// The main code that actually captures all 6 images and then saves them out to +// disk before navigating the embedded web browser to the page with the WebGL +// application that consumes them and creates an EQR image. This code runs as a +// coroutine so it can be suspended at certain points. +void LLFloater360Capture::capture360Images() +{ + // recheck the size of the cube map source images in case it changed + // since it was set when we opened the floater + setSourceImageSize(); + + // disable buttons while we are capturing + mCaptureBtn->setEnabled(false); + mSaveLocalBtn->setEnabled(false); + + bool render_attached_lights = LLPipeline::sRenderAttachedLights; + // determine whether or not to include avatar in the scene as we capture the 360 panorama + if (gSavedSettings.getBOOL("360CaptureHideAvatars")) + { + // Turn off the avatar if UI tells us to hide it. + // Note: the original call to gAvatar.hide(FALSE) did *not* hide + // attachments and so for most residents, there would be some debris + // left behind in the snapshot. + // Note: this toggles so if it set to on, this will turn it off and + // the subsequent call to the same thing after capture is finished + // will turn it back on again. Similarly, for the case where it + // was set to off - I think this is what we need + LLPipeline::toggleRenderTypeControl(LLPipeline::RENDER_TYPE_AVATAR); + LLPipeline::toggleRenderTypeControl(LLPipeline::RENDER_TYPE_PARTICLES); + LLPipeline::sRenderAttachedLights = FALSE; + } + + // these are the 6 directions we will point the camera - essentially, + // North, South, East, West, Up, Down + LLVector3 look_dirs[6] = { LLVector3(1, 0, 0), LLVector3(0, 1, 0), LLVector3(0, 0, 1), LLVector3(-1, 0, 0), LLVector3(0, -1, 0), LLVector3(0, 0, -1) }; + LLVector3 look_upvecs[6] = { LLVector3(0, 0, 1), LLVector3(0, 0, 1), LLVector3(0, -1, 0), LLVector3(0, 0, 1), LLVector3(0, 0, 1), LLVector3(0, 1, 0) }; + + // save current view/camera settings so we can restore them afterwards + S32 old_occlusion = LLPipeline::sUseOcclusion; + + // set new parameters specific to the 360 requirements + LLPipeline::sUseOcclusion = 0; + LLViewerCamera* camera = LLViewerCamera::getInstance(); + F32 old_fov = camera->getView(); + F32 old_aspect = camera->getAspect(); + F32 old_yaw = camera->getYaw(); + + // stop the motion of as much of the world moving as much as we can + freezeWorld(true); + + // Save the direction (in degrees) the camera is looking when we + // take the shot since that is what we write to image metadata + // 'GPano:InitialViewHeadingDegrees' field. + // We need to convert from the angle getYaw() gives us into something + // the XMP data field wants (N=0, E=90, S=180, W= 270 etc.) + mInitialHeadingDeg = (360 + 90 - (int)(camera->getYaw() * RAD_TO_DEG)) % 360; + LL_INFOS("360Capture") << "Recording a heading of " << (int)(mInitialHeadingDeg) << LL_ENDL; + + // camera constants for the square, cube map capture image + camera->setAspect(1.0); // must set aspect ratio first to avoid undesirable clamping of vertical FoV + camera->setView(F_PI_BY_TWO); + camera->yaw(0.0); + + // record how many times we changed camera to try to understand the "all shots are the same issue" + unsigned int camera_changed_times = 0; + + // the name of the JavaScript file written out that contains the 6 cube map images + // stored as a JavaScript array of data URLs. If you change this filename, you must + // also change the corresponding entry in the HTML file that uses it - + // (newview/skins/default/html/common/equirectangular/display_eqr.html) + const std::string cumemap_js_filename("cubemap_img.js"); + + // construct the full path to this file - typically stored in the users' + // Second Life settings / username / eqrimg folder. + const std::string cubemap_js_full_path = makeFullPathToJS(cumemap_js_filename); + + // Write the JavaScript file header (the top of the file before the + // declarations of the actual data URLs array). In practice, all this writes + // is a comment - it's main purpose is to reset the file from the last time + // it was written + writeDataURLHeader(cubemap_js_full_path); + + // the names of the prefixes we assign as the name to each data URL and are then + // consumed by the WebGL application. Nominally, they stand for positive and + // negative in the X/Y/Z directions. + static const std::string prefixes[6] = + { + "posx", "posz", "posy", + "negx", "negz", "negy", + }; + + // number of times to render the scene (display(..) inside + // the simple snapshot function in llViewerWindow. + // Note: rendering even just 1 more time (for a total of 2) + // has a dramatic effect on the scene contents and *much* + // less of it is missing. More investigation required + // but for the moment, this helps with missing content + // because of interest list issues. + int num_render_passes = gSavedSettings.getU32("360CaptureNumRenderPasses"); + + // time the encode process for later optimization + auto encode_time_total = 0.0; + + // for each of the 6 directions we shoot... + for (int i = 0; i < 6; i++) + { + // these buffers are where the raw, captured pixels are stored and + // the first time we use them, we have to make a new one + if (mRawImages[i] == nullptr) + { + mRawImages[i] = new LLImageRaw(mSourceImageSize, mSourceImageSize, 3); + } + else + // subsequent capture with floater open so we resize the buffer from + // the previous run + { + // LLImageRaw deletes the old one via operator= but just to be + // sure, we delete its' large data member first... + mRawImages[i]->deleteData(); + mRawImages[i] = new LLImageRaw(mSourceImageSize, mSourceImageSize, 3); + } + + // set up camera to look in each direction + camera->lookDir(look_dirs[i], look_upvecs[i]); + + // record if camera changed to try to understand the "all shots are the same issue" + if (camera->isChanged()) + { + ++camera_changed_times; + } + + // call the (very) simplified snapshot code that simply deals + // with a single image, no sub-images etc. but is very fast + gViewerWindow->simpleSnapshot(mRawImages[i], + mSourceImageSize, mSourceImageSize, num_render_passes); + + // encode each image and write to disk while saving how long it took to do so + auto t_start = std::chrono::high_resolution_clock::now(); + encodeAndSave(mRawImages[i], cubemap_js_full_path, prefixes[i]); + auto t_end = std::chrono::high_resolution_clock::now(); + auto duration = std::chrono::duration_cast<std::chrono::duration<double>>(t_end - t_start); + encode_time_total += duration.count(); + + // ping the main loop in case the snapshot process takes a really long + // time and we get disconnected + LLAppViewer::instance()->pingMainloopTimeout("LLFloater360Capture::capture360Images"); + } + + // display time to encode all 6 images. It tends to be a fairly linear + // time for each so we don't need to worry about displaying the time + // for each - this gives us plenty to use for optimizing + LL_INFOS("360Capture") << + "Time to encode and save 6 images was " << + encode_time_total << + " seconds" << + LL_ENDL; + + // Write the JavaScript file footer (the bottom of the file after the + // declarations of the actual data URLs array). The footer comprises of + // a JavaScript array declaration that references the 6 data URLs generated + // previously and is what is referred to in the display HTML file + // (newview/skins/default/html/common/equirectangular/display_eqr.html) + writeDataURLFooter(cubemap_js_full_path); + + // unfreeze the world now we have our shots + freezeWorld(false); + + // restore original view/camera/avatar settings settings + camera->setAspect(old_aspect); + camera->setView(old_fov); + camera->yaw(old_yaw); + LLPipeline::sUseOcclusion = old_occlusion; + + // if we toggled off the avatar because the Hide check box was ticked, + // we should toggle it back to where it was before we started the capture + if (gSavedSettings.getBOOL("360CaptureHideAvatars")) + { + LLPipeline::toggleRenderTypeControl(LLPipeline::RENDER_TYPE_AVATAR); + LLPipeline::toggleRenderTypeControl(LLPipeline::RENDER_TYPE_PARTICLES); + LLPipeline::sRenderAttachedLights = render_attached_lights; + } + + // record that we missed some shots in the log for later debugging + // note: we use 5 and not 6 because the first shot isn't regarded + // as a change - only the subsequent 5 are + if (camera_changed_times < 5) + { + LL_INFOS("360Capture") << "Warning: we only captured " << camera_changed_times << " images." << LL_ENDL; + } + + // now we have the 6 shots saved in a well specified location, + // we can load the web content that uses them + std::string url = "file:///" + getHTMLBaseFolder() + mEqrGenHTML; + mWebBrowser->navigateTo(url); + + // page is loaded and ready so we can turn on the buttons again + mCaptureBtn->setEnabled(true); + mSaveLocalBtn->setEnabled(true); + + // allow the UI to update by suspending and waiting for the + // main render loop to update the UI + suspendForAFrame(); +} + +// once the request is made to navigate to the web page containing the code +// to process the 6 images into an EQR one, we have to wait for it to finish +// loaded - we get a "navigate complete" event when that happens that we can act on +void LLFloater360Capture::handleMediaEvent(LLPluginClassMedia* self, EMediaEvent event) +{ + switch (event) + { + // not used right now but retaining because this event might + // be useful for a feature I am hoping to add + case MEDIA_EVENT_LOCATION_CHANGED: + break; + + // navigation in the browser completed + case MEDIA_EVENT_NAVIGATE_COMPLETE: + { + // Confirm that the navigation event does indeed apply to the + // page we are looking for. At the moment, this is the only + // one we care about so the test is superfluous but that might change. + std::string navigate_url = self->getNavigateURI(); + if (navigate_url.find(mEqrGenHTML) != std::string::npos) + { + // this string is being passed across to the web so replace all the windows backslash + // characters with forward slashes or (I think) the backslashes are treated as escapes + std::replace(mImageSaveDir.begin(), mImageSaveDir.end(), '\\', '/'); + + // we store the camera FOV (field of view) in a saved setting since this feels + // like something it would be interesting to change and experiment with + int camera_fov = gSavedSettings.getU32("360CaptureCameraFOV"); + + // compose the overlay for the final web page that tells the user + // what level of quality the capture was taken with + std::string overlay_label = "'" + getSelectedQualityTooltip() + "'"; + + // so now our page is loaded and images are in place - call + // the JavaScript init script with some parameters to initialize + // the WebGL based preview + const std::string cmd = STRINGIZE( + "init(" + << mOutputImageWidth + << ", " + << mOutputImageHeight + << ", " + << "'" + << mImageSaveDir + << "'" + << ", " + << camera_fov + << ", " + << LLViewerCamera::getInstance()->getYaw() + << ", " + << overlay_label + << ")" + ); + + // execute the command on the page + mWebBrowser->getMediaPlugin()->executeJavaScript(cmd); + } + } + break; + + default: + break; + } +} + +// called when the user wants to save the cube maps off to the final EQR image +void LLFloater360Capture::onSaveLocalBtn() +{ + // region name and URL + std::string region_name; // no sensible default + std::string region_url("http://secondlife.com"); + LLViewerRegion* region = gAgent.getRegion(); + if (region) + { + // region names can (and do) contain characters that would make passing + // them into a JavaScript function problematic - single quotes for example + // so we must escape/encode both + region_name = region->getName(); + + // escaping/encoding is a minefield - let's just remove any offending characters from the region name + region_name.erase(std::remove(region_name.begin(), region_name.end(), '\''), region_name.end()); + region_name.erase(std::remove(region_name.begin(), region_name.end(), '\"'), region_name.end()); + + // fortunately there is already an escaping function built into the SLURL generation code + LLSLURL slurl; + bool is_escaped = true; + LLAgentUI::buildSLURL(slurl, is_escaped); + region_url = slurl.getSLURLString(); + } + + // build suggested filename (the one that appears as the default + // in the Save dialog box) + const std::string suggested_filename = generate_proposed_filename(); + + // This string (the name of the product plus a truncated version number (no build)) + // is used in the XMP block as the name of the generating and stitching software. + // We save the version number here and not in the more generic 'software' item + // because that might help us determine something about the image in the future. + const std::string client_version = STRINGIZE( + LLVersionInfo::instance().getChannel() << + " " << + LLVersionInfo::instance().getShortVersion() + ); + + // save the time the image was created. I don't know if this should be + // UTC/ZULU or the users' local time. It probably doesn't matter. + std::time_t result = std::time(nullptr); + std::string ctime_str = std::ctime(&result); + std::string time_str = ctime_str.substr(0, ctime_str.length() - 1); + + // build the JavaScript data structure that is used to pass all the + // variables into the JavaScript function on the web page loaded into + // the embedded browser component of the floater. + const std::string xmp_details = STRINGIZE( + "{ " << + "pano_version: '" << "2.2.1" << "', " << + "software: '" << LLVersionInfo::instance().getChannel() << "', " << + "capture_software: '" << client_version << "', " << + "stitching_software: '" << client_version << "', " << + "width: " << mOutputImageWidth << ", " << + "height: " << mOutputImageHeight << ", " << + "heading: " << mInitialHeadingDeg << ", " << + "actual_source_image_size: " << mQualityRadioGroup->getSelectedValue().asInteger() << ", " << + "scaled_source_image_size: " << mSourceImageSize << ", " << + "first_photo_date: '" << time_str << "', " << + "last_photo_date: '" << time_str << "', " << + "region_name: '" << region_name << "', " << + "region_url: '" << region_url << "', " << + " }" + ); + + // build the JavaScript command to send to the web browser + const std::string cmd = "saveAsEqrImage(\"" + suggested_filename + "\", " + xmp_details + ")"; + + // send it to the browser instance, triggering the equirectangular capture + // process and complimentary offer to save the image + mWebBrowser->getMediaPlugin()->executeJavaScript(cmd); +} + +// We capture all 6 images sequentially and if parts of the world are moving +// E.G. clouds, water, objects - then we may get seams or discontinuities +// when the images are combined to form the EQR image. This code tries to +// stop everything so we can shoot for seamless shots. There is probably more +// we can do here - e.g. waves in the water probably won't line up. +void LLFloater360Capture::freezeWorld(bool enable) +{ + static bool clouds_scroll_paused = false; + if (enable) + { + // record the cloud scroll current value so we can restore it + clouds_scroll_paused = LLEnvironment::instance().isCloudScrollPaused(); + + // stop the clouds moving + LLEnvironment::instance().pauseCloudScroll(); + + // freeze all avatars + LLCharacter* avatarp; + for (std::vector<LLCharacter*>::iterator iter = LLCharacter::sInstances.begin(); + iter != LLCharacter::sInstances.end(); ++iter) + { + avatarp = *iter; + mAvatarPauseHandles.push_back(avatarp->requestPause()); + } + + // freeze everything else + gSavedSettings.setBOOL("FreezeTime", true); + + // disable particle system + LLViewerPartSim::getInstance()->enable(false); + } + else // turning off freeze world mode, either temporarily or not. + { + // restart the clouds moving if they were not paused before + // we starting using the 360 capture floater + if (clouds_scroll_paused == false) + { + LLEnvironment::instance().resumeCloudScroll(); + } + + // thaw all avatars + mAvatarPauseHandles.clear(); + + // thaw everything else + gSavedSettings.setBOOL("FreezeTime", false); + + //enable particle system + LLViewerPartSim::getInstance()->enable(true); + } +} + +// Build the default filename that appears in the Save dialog box. We try +// to encode some metadata about too (region name, EQR dimensions, capture +// time) but the user if free to replace this with anything else before +// the images is saved. +const std::string LLFloater360Capture::generate_proposed_filename() +{ + std::ostringstream filename(""); + + // base name + filename << "sl360_"; + + LLViewerRegion* region = gAgent.getRegion(); + if (region) + { + // this looks complex but it's straightforward - removes all non-alpha chars from a string + // which in this case is the SL region name - we use it as a proposed filename but the user is free to change + std::string region_name = region->getName(); + std::replace_if(region_name.begin(), region_name.end(), std::not1(std::ptr_fun(isalnum)), '_'); + if (region_name.length() > 0) + { + filename << region_name; + filename << "_"; + } + } + + // add in resolution to make it easier to tell what you captured later + filename << mOutputImageWidth; + filename << "x"; + filename << mOutputImageHeight; + filename << "_"; + + // Add in the size of the source image (width == height since it was square) + // Might be useful later for quality comparisons + filename << mSourceImageSize; + filename << "_"; + + // add in the current HH-MM-SS (with leading 0's) so users can easily save many shots in same folder + std::time_t cur_epoch = std::time(nullptr); + std::tm* tm_time = std::localtime(&cur_epoch); + filename << std::setfill('0') << std::setw(4) << (tm_time->tm_year + 1900); + filename << std::setfill('0') << std::setw(2) << (tm_time->tm_mon + 1); + filename << std::setfill('0') << std::setw(2) << tm_time->tm_mday; + filename << "_"; + filename << std::setfill('0') << std::setw(2) << tm_time->tm_hour; + filename << std::setfill('0') << std::setw(2) << tm_time->tm_min; + filename << std::setfill('0') << std::setw(2) << tm_time->tm_sec; + + // the unusual way we save the output image (originates in the + // embedded browser and not the C++ code) means that the system + // appends ".jpeg" to the file automatically on macOS at least, + // so we only need to do it ourselves for windows. +#if LL_WINDOWS + filename << ".jpg"; +#endif + + return filename.str(); +} diff --git a/indra/newview/llfloater360capture.h b/indra/newview/llfloater360capture.h new file mode 100644 index 0000000000..6da7ee074a --- /dev/null +++ b/indra/newview/llfloater360capture.h @@ -0,0 +1,97 @@ +/** + * @file llfloater360capture.h + * @author Callum Prentice (callum@lindenlab.com) + * @brief Floater for the 360 capture feature + * + * $LicenseInfo:firstyear=2011&license=viewerlgpl$ + * Second Life Viewer Source Code + * Copyright (C) 2011, Linden Research, Inc. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; + * version 2.1 of the License only. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + * + * Linden Research, Inc., 945 Battery Street, San Francisco, CA 94111 USA + * $/LicenseInfo$ + */ + +#ifndef LL_FLOATER_360CAPTURE_H +#define LL_FLOATER_360CAPTURE_H + +#include "llfloater.h" +#include "llmediactrl.h" +#include "llcharacter.h" + +class LLImageRaw; +class LLTextBox; +class LLRadioGroup; + +class LLFloater360Capture: + public LLFloater, + public LLViewerMediaObserver +{ + friend class LLFloaterReg; + + private: + LLFloater360Capture(const LLSD& key); + + ~LLFloater360Capture(); + BOOL postBuild() override; + void handleMediaEvent(LLPluginClassMedia* self, EMediaEvent event) override; + + void changeInterestListMode(bool send_everything); + + const std::string getHTMLBaseFolder(); + void capture360Images(); + + const std::string makeFullPathToJS(const std::string filename); + void writeDataURLHeader(const std::string filename); + void writeDataURLFooter(const std::string filename); + bool writeDataURL(const std::string filename, const std::string prefix, U8* data, unsigned int data_len); + void encodeAndSave(LLPointer<LLImageRaw> raw_image, const std::string filename, const std::string prefix); + + std::vector<LLAnimPauseRequest> mAvatarPauseHandles; + void freezeWorld(bool enable); + + void mockSnapShot(LLImageRaw* raw); + + void suspendForAFrame(); + + const std::string generate_proposed_filename(); + + void setSourceImageSize(); + + LLMediaCtrl* mWebBrowser; + const std::string mDefaultHTML = "default.html"; + const std::string mEqrGenHTML = "eqr_gen.html"; + + LLUICtrl* mCaptureBtn; + void onCapture360ImagesBtn(); + + void onSaveLocalBtn(); + LLUICtrl* mSaveLocalBtn; + + LLRadioGroup* mQualityRadioGroup; + void onChooseQualityRadioGroup(); + const std::string getSelectedQualityTooltip(); + + int mSourceImageSize; + float mInitialHeadingDeg; + int mOutputImageWidth; + int mOutputImageHeight; + std::string mImageSaveDir; + + LLPointer<LLImageRaw> mRawImages[6]; +}; + +#endif // LL_FLOATER_360CAPTURE_H diff --git a/indra/newview/llfloaterauction.cpp b/indra/newview/llfloaterauction.cpp index 957b2e1e8e..9813156bf2 100644 --- a/indra/newview/llfloaterauction.cpp +++ b/indra/newview/llfloaterauction.cpp @@ -32,8 +32,7 @@ #include "llimagej2c.h" #include "llimagetga.h" #include "llparcel.h" -#include "llvfile.h" -#include "llvfs.h" +#include "llfilesystem.h" #include "llwindow.h" #include "message.h" @@ -202,7 +201,9 @@ void LLFloaterAuction::onClickSnapshot(void* data) LLPointer<LLImageTGA> tga = new LLImageTGA; tga->encode(raw); - LLVFile::writeFile(tga->getData(), tga->getDataSize(), gVFS, self->mImageID, LLAssetType::AT_IMAGE_TGA); + + LLFileSystem tga_file(self->mImageID, LLAssetType::AT_IMAGE_TGA, LLFileSystem::WRITE); + tga_file.write(tga->getData(), tga->getDataSize()); raw->biasedScaleToPowerOfTwo(LLViewerTexture::MAX_IMAGE_SIZE_DEFAULT); @@ -210,7 +211,9 @@ void LLFloaterAuction::onClickSnapshot(void* data) LLPointer<LLImageJ2C> j2c = new LLImageJ2C; j2c->encode(raw, 0.0f); - LLVFile::writeFile(j2c->getData(), j2c->getDataSize(), gVFS, self->mImageID, LLAssetType::AT_TEXTURE); + + LLFileSystem j2c_file(self->mImageID, LLAssetType::AT_TEXTURE, LLFileSystem::WRITE); + j2c_file.write(j2c->getData(), j2c->getDataSize()); self->mImage = LLViewerTextureManager::getLocalTexture((LLImageRaw*)raw, FALSE); gGL.getTexUnit(0)->bind(self->mImage); diff --git a/indra/newview/llfloaterbvhpreview.cpp b/indra/newview/llfloaterbvhpreview.cpp index 131d9b077b..687d820a18 100644 --- a/indra/newview/llfloaterbvhpreview.cpp +++ b/indra/newview/llfloaterbvhpreview.cpp @@ -32,7 +32,7 @@ #include "lldatapacker.h" #include "lldir.h" #include "llnotificationsutil.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "llapr.h" #include "llstring.h" @@ -997,10 +997,9 @@ void LLFloaterBvhPreview::onBtnOK(void* userdata) LLDataPackerBinaryBuffer dp(buffer, file_size); if (motionp->serialize(dp)) { - LLVFile file(gVFS, motionp->getID(), LLAssetType::AT_ANIMATION, LLVFile::APPEND); + LLFileSystem file(motionp->getID(), LLAssetType::AT_ANIMATION, LLFileSystem::APPEND); S32 size = dp.getCurrentSize(); - file.setMaxSize(size); if (file.write((U8*)buffer, size)) { std::string name = floaterp->getChild<LLUICtrl>("name_form")->getValue().asString(); diff --git a/indra/newview/llfloatermodelpreview.cpp b/indra/newview/llfloatermodelpreview.cpp index d9edd4dc30..64b24d54c3 100644 --- a/indra/newview/llfloatermodelpreview.cpp +++ b/indra/newview/llfloatermodelpreview.cpp @@ -59,6 +59,7 @@ #include "llspinctrl.h" #include "lltabcontainer.h" #include "lltrans.h" +#include "llfilesystem.h" #include "llcallbacklist.h" #include "llviewertexteditor.h" #include "llviewernetwork.h" diff --git a/indra/newview/llfloaterpreference.cpp b/indra/newview/llfloaterpreference.cpp index 82f01fb747..da01457126 100644 --- a/indra/newview/llfloaterpreference.cpp +++ b/indra/newview/llfloaterpreference.cpp @@ -261,7 +261,6 @@ std::string LLFloaterPreference::sSkin = ""; LLFloaterPreference::LLFloaterPreference(const LLSD& key) : LLFloater(key), mGotPersonalInfo(false), - mOriginalIMViaEmail(false), mLanguageChanged(false), mAvatarDataInitialized(false), mSearchDataDirty(true) @@ -557,11 +556,9 @@ void LLFloaterPreference::apply() if (mGotPersonalInfo) { - bool new_im_via_email = getChild<LLUICtrl>("send_im_to_email")->getValue().asBoolean(); bool new_hide_online = getChild<LLUICtrl>("online_visibility")->getValue().asBoolean(); - if ((new_im_via_email != mOriginalIMViaEmail) - ||(new_hide_online != mOriginalHideOnlineStatus)) + if (new_hide_online != mOriginalHideOnlineStatus) { // This hack is because we are representing several different // possible strings with a single checkbox. Since most users @@ -575,7 +572,7 @@ void LLFloaterPreference::apply() //Update showonline value, otherwise multiple applys won't work mOriginalHideOnlineStatus = new_hide_online; } - gAgent.sendAgentUpdateUserInfo(new_im_via_email,mDirectoryVisibility); + gAgent.sendAgentUpdateUserInfo(mDirectoryVisibility); } } @@ -980,12 +977,12 @@ void LLFloaterPreference::onBtnCancel(const LLSD& userdata) } // static -void LLFloaterPreference::updateUserInfo(const std::string& visibility, bool im_via_email, bool is_verified_email) +void LLFloaterPreference::updateUserInfo(const std::string& visibility) { LLFloaterPreference* instance = LLFloaterReg::findTypedInstance<LLFloaterPreference>("preferences"); if (instance) { - instance->setPersonalInfo(visibility, im_via_email, is_verified_email); + instance->setPersonalInfo(visibility); } } @@ -1694,10 +1691,9 @@ bool LLFloaterPreference::moveTranscriptsAndLog() return true; } -void LLFloaterPreference::setPersonalInfo(const std::string& visibility, bool im_via_email, bool is_verified_email) +void LLFloaterPreference::setPersonalInfo(const std::string& visibility) { mGotPersonalInfo = true; - mOriginalIMViaEmail = im_via_email; mDirectoryVisibility = visibility; if (visibility == VISIBILITY_DEFAULT) @@ -1719,16 +1715,7 @@ void LLFloaterPreference::setPersonalInfo(const std::string& visibility, bool im getChildView("friends_online_notify_checkbox")->setEnabled(TRUE); getChild<LLUICtrl>("online_visibility")->setValue(mOriginalHideOnlineStatus); getChild<LLUICtrl>("online_visibility")->setLabelArg("[DIR_VIS]", mDirectoryVisibility); - getChildView("send_im_to_email")->setEnabled(is_verified_email); - std::string tooltip; - if (!is_verified_email) - tooltip = getString("email_unverified_tooltip"); - - getChildView("send_im_to_email")->setToolTip(tooltip); - - // *TODO: Show or hide verify email text here based on is_verified_email - getChild<LLUICtrl>("send_im_to_email")->setValue(im_via_email); getChildView("favorites_on_login_check")->setEnabled(TRUE); getChildView("log_path_button")->setEnabled(TRUE); getChildView("chat_font_size")->setEnabled(TRUE); diff --git a/indra/newview/llfloaterpreference.h b/indra/newview/llfloaterpreference.h index e9e19e9acb..5ef2ca68d3 100644 --- a/indra/newview/llfloaterpreference.h +++ b/indra/newview/llfloaterpreference.h @@ -88,7 +88,7 @@ public: /*virtual*/ void changed(const LLUUID& session_id, U32 mask) {}; // static data update, called from message handler - static void updateUserInfo(const std::string& visibility, bool im_via_email, bool is_verified_email); + static void updateUserInfo(const std::string& visibility); // refresh all the graphics preferences menus static void refreshEnabledGraphics(); @@ -114,7 +114,7 @@ protected: void onBtnOK(const LLSD& userdata); void onBtnCancel(const LLSD& userdata); - void onClickClearCache(); // Clear viewer texture cache, vfs, and VO cache on next startup + void onClickClearCache(); // Clear viewer texture cache, file cache on next startup void onClickBrowserClearCache(); // Clear web history and caches as well as viewer caches above void onLanguageChange(); void onNotificationsChange(const std::string& OptionName); @@ -160,7 +160,7 @@ public: void changeLogPath(const std::vector<std::string>& filenames, std::string proposed_name); bool moveTranscriptsAndLog(); void enableHistory(); - void setPersonalInfo(const std::string& visibility, bool im_via_email, bool is_verified_email); + void setPersonalInfo(const std::string& visibility); void refreshEnabledState(); void onCommitWindowedMode(); void refresh(); // Refresh enable/disable @@ -206,7 +206,6 @@ private: static std::string sSkin; notifications_map mNotificationOptions; bool mGotPersonalInfo; - bool mOriginalIMViaEmail; bool mLanguageChanged; bool mAvatarDataInitialized; std::string mPriorInstantMessageLogPath; diff --git a/indra/newview/llfloaterregioninfo.cpp b/indra/newview/llfloaterregioninfo.cpp index 17e55b5f2c..19080f05c0 100644 --- a/indra/newview/llfloaterregioninfo.cpp +++ b/indra/newview/llfloaterregioninfo.cpp @@ -36,7 +36,7 @@ #include "llglheaders.h" #include "llregionflags.h" #include "llstl.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "llxfermanager.h" #include "indra_constants.h" #include "message.h" @@ -2252,10 +2252,9 @@ void LLPanelEstateCovenant::loadInvItem(LLInventoryItem *itemp) } // static -void LLPanelEstateCovenant::onLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, - LLAssetType::EType type, - void* user_data, S32 status, LLExtStat ext_status) +void LLPanelEstateCovenant::onLoadComplete(const LLUUID& asset_uuid, + LLAssetType::EType type, + void* user_data, S32 status, LLExtStat ext_status) { LL_INFOS() << "LLPanelEstateCovenant::onLoadComplete()" << LL_ENDL; LLPanelEstateCovenant* panelp = (LLPanelEstateCovenant*)user_data; @@ -2263,7 +2262,7 @@ void LLPanelEstateCovenant::onLoadComplete(LLVFS *vfs, { if(0 == status) { - LLVFile file(vfs, asset_uuid, type, LLVFile::READ); + LLFileSystem file(asset_uuid, type, LLFileSystem::READ); S32 file_length = file.getSize(); diff --git a/indra/newview/llfloaterregioninfo.h b/indra/newview/llfloaterregioninfo.h index 75d0c3ea5c..c34dbb62e8 100644 --- a/indra/newview/llfloaterregioninfo.h +++ b/indra/newview/llfloaterregioninfo.h @@ -55,7 +55,6 @@ class LLRadioGroup; class LLSliderCtrl; class LLSpinCtrl; class LLTextBox; -class LLVFS; class LLPanelRegionGeneralInfo; class LLPanelRegionDebugInfo; @@ -357,8 +356,7 @@ public: static bool confirmResetCovenantCallback(const LLSD& notification, const LLSD& response); void sendChangeCovenantID(const LLUUID &asset_id); void loadInvItem(LLInventoryItem *itemp); - static void onLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, + static void onLoadComplete(const LLUUID& asset_uuid, LLAssetType::EType type, void* user_data, S32 status, LLExtStat ext_status); diff --git a/indra/newview/llfloaterreporter.cpp b/indra/newview/llfloaterreporter.cpp index a30c73768d..b73755cf4e 100644 --- a/indra/newview/llfloaterreporter.cpp +++ b/indra/newview/llfloaterreporter.cpp @@ -44,8 +44,7 @@ #include "llnotificationsutil.h" #include "llstring.h" #include "llsys.h" -#include "llvfile.h" -#include "llvfs.h" +#include "llfilesystem.h" #include "mean_collision_data.h" #include "message.h" #include "v3math.h" @@ -896,12 +895,9 @@ void LLFloaterReporter::takeScreenshot(bool use_prev_screenshot) mResourceDatap->mAssetInfo.setName("screenshot_name"); mResourceDatap->mAssetInfo.setDescription("screenshot_descr"); - // store in VFS - LLVFile::writeFile(upload_data->getData(), - upload_data->getDataSize(), - gVFS, - mResourceDatap->mAssetInfo.mUuid, - mResourceDatap->mAssetInfo.mType); + // store in cache + LLFileSystem j2c_file(mResourceDatap->mAssetInfo.mUuid, mResourceDatap->mAssetInfo.mType, LLFileSystem::WRITE); + j2c_file.write(upload_data->getData(), upload_data->getDataSize()); // store in the image list so it doesn't try to fetch from the server LLPointer<LLViewerFetchedTexture> image_in_list = diff --git a/indra/newview/llfloatersnapshot.cpp b/indra/newview/llfloatersnapshot.cpp index ef7a9fd536..83212230e5 100644 --- a/indra/newview/llfloatersnapshot.cpp +++ b/indra/newview/llfloatersnapshot.cpp @@ -179,6 +179,10 @@ void LLFloaterSnapshotBase::ImplBase::updateLayout(LLFloaterSnapshotBase* floate thumbnail_placeholder->reshape(panel_width, thumbnail_placeholder->getRect().getHeight()); floaterp->getChild<LLUICtrl>("image_res_text")->setVisible(mAdvanced); floaterp->getChild<LLUICtrl>("file_size_label")->setVisible(mAdvanced); + if (floaterp->hasChild("360_label", TRUE)) + { + floaterp->getChild<LLUICtrl>("360_label")->setVisible(mAdvanced); + } if(!floaterp->isMinimized()) { floaterp->reshape(floater_width, floaterp->getRect().getHeight()); @@ -992,6 +996,10 @@ BOOL LLFloaterSnapshot::postBuild() getChild<LLButton>("retract_btn")->setCommitCallback(boost::bind(&LLFloaterSnapshot::onExtendFloater, this)); getChild<LLButton>("extend_btn")->setCommitCallback(boost::bind(&LLFloaterSnapshot::onExtendFloater, this)); + getChild<LLTextBox>("360_label")->setSoundFlags(LLView::MOUSE_UP); + getChild<LLTextBox>("360_label")->setShowCursorHand(false); + getChild<LLTextBox>("360_label")->setClickedCallback(boost::bind(&LLFloaterSnapshot::on360Snapshot, this)); + // Filters LLComboBox* filterbox = getChild<LLComboBox>("filters_combobox"); std::vector<std::string> filter_list = LLImageFiltersManager::getInstance()->getFiltersList(); @@ -1118,6 +1126,12 @@ void LLFloaterSnapshot::onExtendFloater() impl->setAdvanced(gSavedSettings.getBOOL("AdvanceSnapshot")); } +void LLFloaterSnapshot::on360Snapshot() +{ + LLFloaterReg::showInstance("360capture"); + closeFloater(); +} + //virtual void LLFloaterSnapshotBase::onClose(bool app_quitting) { diff --git a/indra/newview/llfloatersnapshot.h b/indra/newview/llfloatersnapshot.h index 8221b0a637..7ec133ff45 100644 --- a/indra/newview/llfloatersnapshot.h +++ b/indra/newview/llfloatersnapshot.h @@ -153,6 +153,7 @@ public: static void update(); void onExtendFloater(); + void on360Snapshot(); static LLFloaterSnapshot* getInstance(); static LLFloaterSnapshot* findInstance(); diff --git a/indra/newview/llfloatertos.cpp b/indra/newview/llfloatertos.cpp index bd403f68d7..1aeb727172 100644 --- a/indra/newview/llfloatertos.cpp +++ b/indra/newview/llfloatertos.cpp @@ -40,7 +40,7 @@ #include "lltextbox.h" #include "llui.h" #include "lluictrlfactory.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "message.h" #include "llstartup.h" // login_alert_done #include "llcorehttputil.h" diff --git a/indra/newview/llfloatertos.h b/indra/newview/llfloatertos.h index 85033acf4d..7c2f0705b7 100644 --- a/indra/newview/llfloatertos.h +++ b/indra/newview/llfloatertos.h @@ -36,7 +36,6 @@ class LLButton; class LLRadioGroup; -class LLVFS; class LLTextEditor; class LLUUID; diff --git a/indra/newview/llgesturemgr.cpp b/indra/newview/llgesturemgr.cpp index 950a6cfaef..9f2119281d 100644 --- a/indra/newview/llgesturemgr.cpp +++ b/indra/newview/llgesturemgr.cpp @@ -42,7 +42,7 @@ #include "llnotificationsutil.h" #include "llstl.h" #include "llstring.h" // todo: remove -#include "llvfile.h" +#include "llfilesystem.h" #include "message.h" // newview @@ -548,7 +548,7 @@ void LLGestureMgr::playGesture(LLMultiGesture* gesture) LLGestureStepAnimation* anim_step = (LLGestureStepAnimation*)step; const LLUUID& anim_id = anim_step->mAnimAssetID; - // Don't request the animation if this step stops it or if it is already in Static VFS + // Don't request the animation if this step stops it or if it is already in the cache if (!(anim_id.isNull() || anim_step->mFlags & ANIM_FLAG_STOP || gAssetStorage->hasLocalAsset(anim_id, LLAssetType::AT_ANIMATION))) @@ -1038,10 +1038,9 @@ void LLGestureMgr::runStep(LLMultiGesture* gesture, LLGestureStep* step) // static -void LLGestureMgr::onLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, - LLAssetType::EType type, - void* user_data, S32 status, LLExtStat ext_status) +void LLGestureMgr::onLoadComplete(const LLUUID& asset_uuid, + LLAssetType::EType type, + void* user_data, S32 status, LLExtStat ext_status) { LLLoadInfo* info = (LLLoadInfo*)user_data; @@ -1056,7 +1055,7 @@ void LLGestureMgr::onLoadComplete(LLVFS *vfs, if (0 == status) { - LLVFile file(vfs, asset_uuid, type, LLVFile::READ); + LLFileSystem file(asset_uuid, type, LLFileSystem::READ); S32 size = file.getSize(); std::vector<char> buffer(size+1); @@ -1159,8 +1158,7 @@ void LLGestureMgr::onLoadComplete(LLVFS *vfs, } // static -void LLGestureMgr::onAssetLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, +void LLGestureMgr::onAssetLoadComplete(const LLUUID& asset_uuid, LLAssetType::EType type, void* user_data, S32 status, LLExtStat ext_status) { @@ -1172,7 +1170,7 @@ void LLGestureMgr::onAssetLoadComplete(LLVFS *vfs, { case LLAssetType::AT_ANIMATION: { - LLKeyframeMotion::onLoadComplete(vfs, asset_uuid, type, user_data, status, ext_status); + LLKeyframeMotion::onLoadComplete(asset_uuid, type, user_data, status, ext_status); self.mLoadingAssets.erase(asset_uuid); @@ -1180,7 +1178,7 @@ void LLGestureMgr::onAssetLoadComplete(LLVFS *vfs, } case LLAssetType::AT_SOUND: { - LLAudioEngine::assetCallback(vfs, asset_uuid, type, user_data, status, ext_status); + LLAudioEngine::assetCallback(asset_uuid, type, user_data, status, ext_status); self.mLoadingAssets.erase(asset_uuid); diff --git a/indra/newview/llgesturemgr.h b/indra/newview/llgesturemgr.h index 402bdf6039..91ab445273 100644 --- a/indra/newview/llgesturemgr.h +++ b/indra/newview/llgesturemgr.h @@ -40,7 +40,6 @@ class LLMultiGesture; class LLGestureListener; class LLGestureStep; class LLUUID; -class LLVFS; class LLGestureManagerObserver { @@ -154,15 +153,13 @@ protected: void done(); // Used by loadGesture - static void onLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, - LLAssetType::EType type, - void* user_data, S32 status, LLExtStat ext_status); + static void onLoadComplete(const LLUUID& asset_uuid, + LLAssetType::EType type, + void* user_data, S32 status, LLExtStat ext_status); // Used by playGesture to load an asset file // required to play a gesture step - static void onAssetLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, + static void onAssetLoadComplete(const LLUUID& asset_uuid, LLAssetType::EType type, void* user_data, S32 status, LLExtStat ext_status); diff --git a/indra/newview/lllandmarklist.cpp b/indra/newview/lllandmarklist.cpp index 9106d4e986..31e76267e6 100644 --- a/indra/newview/lllandmarklist.cpp +++ b/indra/newview/lllandmarklist.cpp @@ -33,7 +33,7 @@ #include "llappviewer.h" #include "llagent.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "llviewerstats.h" // Globals @@ -124,7 +124,6 @@ LLLandmark* LLLandmarkList::getAsset(const LLUUID& asset_uuid, loaded_callback_t // static void LLLandmarkList::processGetAssetReply( - LLVFS *vfs, const LLUUID& uuid, LLAssetType::EType type, void* user_data, @@ -133,7 +132,7 @@ void LLLandmarkList::processGetAssetReply( { if( status == 0 ) { - LLVFile file(vfs, uuid, type); + LLFileSystem file(uuid, type); S32 file_length = file.getSize(); if (file_length > 0) diff --git a/indra/newview/lllandmarklist.h b/indra/newview/lllandmarklist.h index 4f3b11660d..f5fa958204 100644 --- a/indra/newview/lllandmarklist.h +++ b/indra/newview/lllandmarklist.h @@ -52,7 +52,6 @@ public: BOOL assetExists(const LLUUID& asset_uuid); LLLandmark* getAsset(const LLUUID& asset_uuid, loaded_callback_t cb = NULL); static void processGetAssetReply( - LLVFS *vfs, const LLUUID& uuid, LLAssetType::EType type, void* user_data, diff --git a/indra/newview/llmeshrepository.cpp b/indra/newview/llmeshrepository.cpp index 2c1c1191da..8080e43383 100644 --- a/indra/newview/llmeshrepository.cpp +++ b/indra/newview/llmeshrepository.cpp @@ -49,7 +49,7 @@ #include "llsdutil_math.h" #include "llsdserialize.h" #include "llthread.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "llviewercontrol.h" #include "llviewerinventory.h" #include "llviewermenufile.h" @@ -294,8 +294,6 @@ // * Header parse failures come without much explanation. Elaborate. // * Work queue for uploads? Any need for this or is the current scheme good // enough? -// * Various temp buffers used in VFS I/O might be allocated once or even -// statically. Look for some wins here. // * Move data structures holding mesh data used by main thread into main- // thread-only access so that no locking is needed. May require duplication // of some data so that worker thread has a minimal data set to guide @@ -1336,8 +1334,8 @@ bool LLMeshRepoThread::fetchMeshSkinInfo(const LLUUID& mesh_id) if (version <= MAX_MESH_VERSION && offset >= 0 && size > 0) { - //check VFS for mesh skin info - LLVFile file(gVFS, mesh_id, LLAssetType::AT_MESH); + //check cache for mesh skin info + LLFileSystem file(mesh_id, LLAssetType::AT_MESH); if (file.getSize() >= offset+size) { U8* buffer = new(std::nothrow) U8[size]; @@ -1370,7 +1368,7 @@ bool LLMeshRepoThread::fetchMeshSkinInfo(const LLUUID& mesh_id) delete[] buffer; } - //reading from VFS failed for whatever reason, fetch from sim + //reading from cache failed for whatever reason, fetch from sim std::string http_url; constructUrl(mesh_id, &http_url); @@ -1432,8 +1430,8 @@ bool LLMeshRepoThread::fetchMeshDecomposition(const LLUUID& mesh_id) if (version <= MAX_MESH_VERSION && offset >= 0 && size > 0) { - //check VFS for mesh skin info - LLVFile file(gVFS, mesh_id, LLAssetType::AT_MESH); + //check cache for mesh skin info + LLFileSystem file(mesh_id, LLAssetType::AT_MESH); if (file.getSize() >= offset+size) { U8* buffer = new(std::nothrow) U8[size]; @@ -1467,7 +1465,7 @@ bool LLMeshRepoThread::fetchMeshDecomposition(const LLUUID& mesh_id) delete[] buffer; } - //reading from VFS failed for whatever reason, fetch from sim + //reading from cache failed for whatever reason, fetch from sim std::string http_url; constructUrl(mesh_id, &http_url); @@ -1529,8 +1527,8 @@ bool LLMeshRepoThread::fetchMeshPhysicsShape(const LLUUID& mesh_id) if (version <= MAX_MESH_VERSION && offset >= 0 && size > 0) { - //check VFS for mesh physics shape info - LLVFile file(gVFS, mesh_id, LLAssetType::AT_MESH); + //check cache for mesh physics shape info + LLFileSystem file(mesh_id, LLAssetType::AT_MESH); if (file.getSize() >= offset+size) { LLMeshRepository::sCacheBytesRead += size; @@ -1563,7 +1561,7 @@ bool LLMeshRepoThread::fetchMeshPhysicsShape(const LLUUID& mesh_id) delete[] buffer; } - //reading from VFS failed for whatever reason, fetch from sim + //reading from cache failed for whatever reason, fetch from sim std::string http_url; constructUrl(mesh_id, &http_url); @@ -1634,8 +1632,8 @@ bool LLMeshRepoThread::fetchMeshHeader(const LLVolumeParams& mesh_params, bool c ++LLMeshRepository::sMeshRequestCount; { - //look for mesh in asset in vfs - LLVFile file(gVFS, mesh_params.getSculptID(), LLAssetType::AT_MESH); + //look for mesh in asset in cache + LLFileSystem file(mesh_params.getSculptID(), LLAssetType::AT_MESH); S32 size = file.getSize(); @@ -1649,7 +1647,11 @@ bool LLMeshRepoThread::fetchMeshHeader(const LLVolumeParams& mesh_params, bool c file.read(buffer, bytes); if (headerReceived(mesh_params, buffer, bytes) == MESH_OK) { - // Found mesh in VFS cache + std::string mid; + mesh_params.getSculptID().toString(mid); + LL_DEBUGS(LOG_MESH) << "Mesh/Cache: Mesh header for ID " << mid << " - was retrieved from the cache." << LL_ENDL; + + // Found mesh in cache return true; } } @@ -1660,8 +1662,13 @@ bool LLMeshRepoThread::fetchMeshHeader(const LLVolumeParams& mesh_params, bool c std::string http_url; constructUrl(mesh_params.getSculptID(), &http_url); + if (!http_url.empty()) { + std::string mid; + mesh_params.getSculptID().toString(mid); + LL_DEBUGS(LOG_MESH) << "Mesh/Cache: Mesh header for ID " << mid << " - was retrieved from the simulator." << LL_ENDL; + //grab first 4KB if we're going to bother with a fetch. Cache will prevent future fetches if a full mesh fits //within the first 4KB //NOTE -- this will break of headers ever exceed 4KB @@ -1713,8 +1720,8 @@ bool LLMeshRepoThread::fetchMeshLOD(const LLVolumeParams& mesh_params, S32 lod, if (version <= MAX_MESH_VERSION && offset >= 0 && size > 0) { - //check VFS for mesh asset - LLVFile file(gVFS, mesh_id, LLAssetType::AT_MESH); + //check cache for mesh asset + LLFileSystem file(mesh_id, LLAssetType::AT_MESH); if (file.getSize() >= offset+size) { U8* buffer = new(std::nothrow) U8[size]; @@ -1742,6 +1749,11 @@ bool LLMeshRepoThread::fetchMeshLOD(const LLVolumeParams& mesh_params, S32 lod, if (lodReceived(mesh_params, lod, buffer, size) == MESH_OK) { delete[] buffer; + + std::string mid; + mesh_id.toString(mid); + LL_DEBUGS(LOG_MESH) << "Mesh/Cache: Mesh body for ID " << mid << " - was retrieved from the cache." << LL_ENDL; + return true; } } @@ -1749,12 +1761,16 @@ bool LLMeshRepoThread::fetchMeshLOD(const LLVolumeParams& mesh_params, S32 lod, delete[] buffer; } - //reading from VFS failed for whatever reason, fetch from sim + //reading from cache failed for whatever reason, fetch from sim std::string http_url; constructUrl(mesh_id, &http_url); - + if (!http_url.empty()) { + std::string mid; + mesh_id.toString(mid); + LL_DEBUGS(LOG_MESH) << "Mesh/Cache: Mesh body for ID " << mid << " - was retrieved from the simulator." << LL_ENDL; + LLMeshHandlerBase::ptr_t handler(new LLMeshLODHandler(mesh_params, lod, offset, size)); LLCore::HttpHandle handle = getByteRange(http_url, offset, size, handler); if (LLCORE_HTTP_HANDLE_INVALID == handle) @@ -3208,7 +3224,7 @@ void LLMeshHeaderHandler::processData(LLCore::BufferArray * /* body */, S32 /* b } else if (data && data_size > 0) { - // header was successfully retrieved from sim and parsed, cache in vfs + // header was successfully retrieved from sim and parsed and is in cache S32 header_bytes = 0; LLSD header; @@ -3247,31 +3263,32 @@ void LLMeshHeaderHandler::processData(LLCore::BufferArray * /* body */, S32 /* b // It's possible for the remote asset to have more data than is needed for the local cache - // only allocate as much space in the VFS as is needed for the local cache + // only allocate as much space in the cache as is needed for the local cache data_size = llmin(data_size, bytes); - LLVFile file(gVFS, mesh_id, LLAssetType::AT_MESH, LLVFile::WRITE); - if (file.getMaxSize() >= bytes || file.setMaxSize(bytes)) + // <FS:Ansariel> Fix asset caching + //LLFileSystem file(mesh_id, LLAssetType::AT_MESH, LLFileSystem::WRITE); + LLFileSystem file(mesh_id, LLAssetType::AT_MESH, LLFileSystem::READ_WRITE); + if (file.getMaxSize() >= bytes) { LLMeshRepository::sCacheBytesWritten += data_size; ++LLMeshRepository::sCacheWrites; file.write(data, data_size); - - // zero out the rest of the file - U8 block[MESH_HEADER_SIZE]; - memset(block, 0, sizeof(block)); - while (bytes-file.tell() > sizeof(block)) - { - file.write(block, sizeof(block)); - } - - S32 remaining = bytes-file.tell(); + // <FS:Ansariel> Fix asset caching + S32 remaining = bytes - file.tell(); if (remaining > 0) { - file.write(block, remaining); + U8* block = new(std::nothrow) U8[remaining]; + if (block) + { + memset(block, 0, remaining); + file.write(block, remaining); + delete[] block; + } } + // </FS:Ansariel> } } else @@ -3323,8 +3340,10 @@ void LLMeshLODHandler::processData(LLCore::BufferArray * /* body */, S32 /* body EMeshProcessingResult result = gMeshRepo.mThread->lodReceived(mMeshParams, mLOD, data, data_size); if (result == MESH_OK) { - // good fetch from sim, write to VFS for caching - LLVFile file(gVFS, mMeshParams.getSculptID(), LLAssetType::AT_MESH, LLVFile::WRITE); + // good fetch from sim, write to cache + // <FS:Ansariel> Fix asset caching + //LLFileSystem file(mMeshParams.getSculptID(), LLAssetType::AT_MESH, LLFileSystem::WRITE); + LLFileSystem file(mMeshParams.getSculptID(), LLAssetType::AT_MESH, LLFileSystem::READ_WRITE); S32 offset = mOffset; S32 size = mRequestedBytes; @@ -3387,8 +3406,10 @@ void LLMeshSkinInfoHandler::processData(LLCore::BufferArray * /* body */, S32 /* && ((data != NULL) == (data_size > 0)) // if we have data but no size or have size but no data, something is wrong && gMeshRepo.mThread->skinInfoReceived(mMeshID, data, data_size)) { - // good fetch from sim, write to VFS for caching - LLVFile file(gVFS, mMeshID, LLAssetType::AT_MESH, LLVFile::WRITE); + // good fetch from sim, write to cache + // <FS:Ansariel> Fix asset caching + //LLFileSystem file(mMeshID, LLAssetType::AT_MESH, LLFileSystem::WRITE); + LLFileSystem file(mMeshID, LLAssetType::AT_MESH, LLFileSystem::READ_WRITE); S32 offset = mOffset; S32 size = mRequestedBytes; @@ -3435,8 +3456,10 @@ void LLMeshDecompositionHandler::processData(LLCore::BufferArray * /* body */, S && ((data != NULL) == (data_size > 0)) // if we have data but no size or have size but no data, something is wrong && gMeshRepo.mThread->decompositionReceived(mMeshID, data, data_size)) { - // good fetch from sim, write to VFS for caching - LLVFile file(gVFS, mMeshID, LLAssetType::AT_MESH, LLVFile::WRITE); + // good fetch from sim, write to cache + // <FS:Ansariel> Fix asset caching + //LLFileSystem file(mMeshID, LLAssetType::AT_MESH, LLFileSystem::WRITE); + LLFileSystem file(mMeshID, LLAssetType::AT_MESH, LLFileSystem::READ_WRITE); S32 offset = mOffset; S32 size = mRequestedBytes; @@ -3482,8 +3505,10 @@ void LLMeshPhysicsShapeHandler::processData(LLCore::BufferArray * /* body */, S3 && ((data != NULL) == (data_size > 0)) // if we have data but no size or have size but no data, something is wrong && gMeshRepo.mThread->physicsShapeReceived(mMeshID, data, data_size) == MESH_OK) { - // good fetch from sim, write to VFS for caching - LLVFile file(gVFS, mMeshID, LLAssetType::AT_MESH, LLVFile::WRITE); + // good fetch from sim, write to cache for caching + // <FS:Ansariel> Fix asset caching + //LLFileSystem file(mMeshID, LLAssetType::AT_MESH, LLFileSystem::WRITE); + LLFileSystem file(mMeshID, LLAssetType::AT_MESH, LLFileSystem::READ_WRITE); S32 offset = mOffset; S32 size = mRequestedBytes; diff --git a/indra/newview/llmeshrepository.h b/indra/newview/llmeshrepository.h index 81e49cb1d8..441264d42f 100644 --- a/indra/newview/llmeshrepository.h +++ b/indra/newview/llmeshrepository.h @@ -48,7 +48,6 @@ class LLVOVolume; class LLMutex; class LLCondition; -class LLVFS; class LLMeshRepository; typedef enum e_mesh_processing_result_enum diff --git a/indra/newview/lloutfitgallery.cpp b/indra/newview/lloutfitgallery.cpp index 6a1597fad5..1f7bfbbf8a 100644 --- a/indra/newview/lloutfitgallery.cpp +++ b/indra/newview/lloutfitgallery.cpp @@ -32,7 +32,7 @@ // llcommon #include "llcommonutils.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "llaccordionctrltab.h" #include "llappearancemgr.h" diff --git a/indra/newview/lloutfitgallery.h b/indra/newview/lloutfitgallery.h index 6dd8a6298f..ce5c090134 100644 --- a/indra/newview/lloutfitgallery.h +++ b/indra/newview/lloutfitgallery.h @@ -38,7 +38,6 @@ #include <vector> -class LLVFS; class LLOutfitGallery; class LLOutfitGalleryItem; class LLOutfitListGearMenuBase; diff --git a/indra/newview/llpostcard.cpp b/indra/newview/llpostcard.cpp index d5775042c1..071fc31d27 100644 --- a/indra/newview/llpostcard.cpp +++ b/indra/newview/llpostcard.cpp @@ -28,8 +28,7 @@ #include "llpostcard.h" -#include "llvfile.h" -#include "llvfs.h" +#include "llfilesystem.h" #include "llviewerregion.h" #include "message.h" diff --git a/indra/newview/llpreviewgesture.cpp b/indra/newview/llpreviewgesture.cpp index 18c2fb5452..061ecad099 100644 --- a/indra/newview/llpreviewgesture.cpp +++ b/indra/newview/llpreviewgesture.cpp @@ -30,7 +30,7 @@ #include "llagent.h" #include "llanimstatelabels.h" #include "llanimationstates.h" -#include "llappviewer.h" // gVFS +#include "llappviewer.h" #include "llcheckboxctrl.h" #include "llcombobox.h" #include "lldatapacker.h" @@ -47,7 +47,7 @@ #include "llradiogroup.h" #include "llresmgr.h" #include "lltrans.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "llviewerobjectlist.h" #include "llviewerregion.h" #include "llviewerstats.h" @@ -841,10 +841,9 @@ void LLPreviewGesture::loadAsset() // static -void LLPreviewGesture::onLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, - LLAssetType::EType type, - void* user_data, S32 status, LLExtStat ext_status) +void LLPreviewGesture::onLoadComplete(const LLUUID& asset_uuid, + LLAssetType::EType type, + void* user_data, S32 status, LLExtStat ext_status) { LLUUID* item_idp = (LLUUID*)user_data; @@ -853,7 +852,7 @@ void LLPreviewGesture::onLoadComplete(LLVFS *vfs, { if (0 == status) { - LLVFile file(vfs, asset_uuid, type, LLVFile::READ); + LLFileSystem file(asset_uuid, type, LLFileSystem::READ); S32 size = file.getSize(); std::vector<char> buffer(size+1); @@ -1142,10 +1141,9 @@ void LLPreviewGesture::saveIfNeeded() tid.generate(); assetId = tid.makeAssetID(gAgent.getSecureSessionID()); - LLVFile file(gVFS, assetId, LLAssetType::AT_GESTURE, LLVFile::APPEND); + LLFileSystem file(assetId, LLAssetType::AT_GESTURE, LLFileSystem::APPEND); S32 size = dp.getCurrentSize(); - file.setMaxSize(size); file.write((U8*)buffer, size); LLLineEditor* descEditor = getChild<LLLineEditor>("desc"); diff --git a/indra/newview/llpreviewgesture.h b/indra/newview/llpreviewgesture.h index ffcada4cc2..f5c47d71b8 100644 --- a/indra/newview/llpreviewgesture.h +++ b/indra/newview/llpreviewgesture.h @@ -39,7 +39,6 @@ class LLScrollListCtrl; class LLScrollListItem; class LLButton; class LLRadioGroup; -class LLVFS; class LLPreviewGesture : public LLPreview { @@ -80,8 +79,7 @@ protected: void loadAsset(); - static void onLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, + static void onLoadComplete(const LLUUID& asset_uuid, LLAssetType::EType type, void* user_data, S32 status, LLExtStat ext_status); diff --git a/indra/newview/llpreviewnotecard.cpp b/indra/newview/llpreviewnotecard.cpp index 59be35fe92..230def5362 100644 --- a/indra/newview/llpreviewnotecard.cpp +++ b/indra/newview/llpreviewnotecard.cpp @@ -46,7 +46,7 @@ #include "llselectmgr.h" #include "lltrans.h" #include "llviewertexteditor.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "llviewerinventory.h" #include "llviewerobject.h" #include "llviewerobjectlist.h" @@ -352,8 +352,7 @@ void LLPreviewNotecard::loadAsset() } // static -void LLPreviewNotecard::onLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, +void LLPreviewNotecard::onLoadComplete(const LLUUID& asset_uuid, LLAssetType::EType type, void* user_data, S32 status, LLExtStat ext_status) { @@ -364,7 +363,7 @@ void LLPreviewNotecard::onLoadComplete(LLVFS *vfs, { if(0 == status) { - LLVFile file(vfs, asset_uuid, type, LLVFile::READ); + LLFileSystem file(asset_uuid, type, LLFileSystem::READ); S32 file_length = file.getSize(); @@ -471,7 +470,7 @@ void LLPreviewNotecard::finishInventoryUpload(LLUUID itemId, LLUUID newAssetId, LLPreviewNotecard* nc = LLFloaterReg::findTypedInstance<LLPreviewNotecard>("preview_notecard", LLSD(itemId)); if (nc) { - // *HACK: we have to delete the asset in the VFS so + // *HACK: we have to delete the asset in the cache so // that the viewer will redownload it. This is only // really necessary if the asset had to be modified by // the uploader, so this can be optimized away in some @@ -479,7 +478,7 @@ void LLPreviewNotecard::finishInventoryUpload(LLUUID itemId, LLUUID newAssetId, // script actually changed the asset. if (nc->hasEmbeddedInventory()) { - gVFS->removeFile(newAssetId, LLAssetType::AT_NOTECARD); + LLFileSystem::removeFile(newAssetId, LLAssetType::AT_NOTECARD); } if (newItemId.isNull()) { @@ -504,7 +503,7 @@ void LLPreviewNotecard::finishTaskUpload(LLUUID itemId, LLUUID newAssetId, LLUUI { if (nc->hasEmbeddedInventory()) { - gVFS->removeFile(newAssetId, LLAssetType::AT_NOTECARD); + LLFileSystem::removeFile(newAssetId, LLAssetType::AT_NOTECARD); } nc->setAssetId(newAssetId); nc->refreshFromInventory(); @@ -583,14 +582,13 @@ bool LLPreviewNotecard::saveIfNeeded(LLInventoryItem* copyitem, bool sync) tid.generate(); asset_id = tid.makeAssetID(gAgent.getSecureSessionID()); - LLVFile file(gVFS, asset_id, LLAssetType::AT_NOTECARD, LLVFile::APPEND); + LLFileSystem file(asset_id, LLAssetType::AT_NOTECARD, LLFileSystem::APPEND); LLSaveNotecardInfo* info = new LLSaveNotecardInfo(this, mItemUUID, mObjectUUID, tid, copyitem); S32 size = buffer.length() + 1; - file.setMaxSize(size); file.write((U8*)buffer.c_str(), size); gAssetStorage->storeAssetData(tid, LLAssetType::AT_NOTECARD, diff --git a/indra/newview/llpreviewnotecard.h b/indra/newview/llpreviewnotecard.h index 3a706b8645..321f44a1ea 100644 --- a/indra/newview/llpreviewnotecard.h +++ b/indra/newview/llpreviewnotecard.h @@ -89,8 +89,7 @@ protected: void deleteNotecard(); - static void onLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, + static void onLoadComplete(const LLUUID& asset_uuid, LLAssetType::EType type, void* user_data, S32 status, LLExtStat ext_status); diff --git a/indra/newview/llpreviewscript.cpp b/indra/newview/llpreviewscript.cpp index f13910cde5..a32dc8beda 100644 --- a/indra/newview/llpreviewscript.cpp +++ b/indra/newview/llpreviewscript.cpp @@ -51,7 +51,7 @@ #include "llsdserialize.h" #include "llslider.h" #include "lltooldraganddrop.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "llagent.h" #include "llmenugl.h" @@ -1714,8 +1714,11 @@ void LLPreviewLSL::saveIfNeeded(bool sync /*= true*/) { std::string buffer(mScriptEd->mEditor->getText()); + LLUUID old_asset_id = inv_item->getAssetUUID().isNull() ? mScriptEd->getAssetID() : inv_item->getAssetUUID(); + LLResourceUploadInfo::ptr_t uploadInfo(std::make_shared<LLScriptAssetUpload>(mItemUUID, buffer, - [](LLUUID itemId, LLUUID, LLUUID, LLSD response) { + [old_asset_id](LLUUID itemId, LLUUID, LLUUID, LLSD response) { + LLFileSystem::removeFile(old_asset_id, LLAssetType::AT_LSL_TEXT); LLPreviewLSL::finishedLSLUpload(itemId, response); })); @@ -1725,8 +1728,8 @@ void LLPreviewLSL::saveIfNeeded(bool sync /*= true*/) } // static -void LLPreviewLSL::onLoadComplete( LLVFS *vfs, const LLUUID& asset_uuid, LLAssetType::EType type, - void* user_data, S32 status, LLExtStat ext_status) +void LLPreviewLSL::onLoadComplete(const LLUUID& asset_uuid, LLAssetType::EType type, + void* user_data, S32 status, LLExtStat ext_status) { LL_DEBUGS() << "LLPreviewLSL::onLoadComplete: got uuid " << asset_uuid << LL_ENDL; @@ -1736,7 +1739,7 @@ void LLPreviewLSL::onLoadComplete( LLVFS *vfs, const LLUUID& asset_uuid, LLAsset { if(0 == status) { - LLVFile file(vfs, asset_uuid, type); + LLFileSystem file(asset_uuid, type); S32 file_length = file.getSize(); std::vector<char> buffer(file_length+1); @@ -1763,6 +1766,7 @@ void LLPreviewLSL::onLoadComplete( LLVFS *vfs, const LLUUID& asset_uuid, LLAsset } preview->mScriptEd->setScriptName(script_name); preview->mScriptEd->setEnableEditing(is_modifiable); + preview->mScriptEd->setAssetID(asset_uuid); preview->mAssetStatus = PREVIEW_ASSET_LOADED; } else @@ -1999,7 +2003,7 @@ void LLLiveLSLEditor::loadAsset() } // static -void LLLiveLSLEditor::onLoadComplete(LLVFS *vfs, const LLUUID& asset_id, +void LLLiveLSLEditor::onLoadComplete(const LLUUID& asset_id, LLAssetType::EType type, void* user_data, S32 status, LLExtStat ext_status) { @@ -2013,9 +2017,10 @@ void LLLiveLSLEditor::onLoadComplete(LLVFS *vfs, const LLUUID& asset_id, { if( LL_ERR_NOERR == status ) { - instance->loadScriptText(vfs, asset_id, type); + instance->loadScriptText(asset_id, type); instance->mScriptEd->setEnableEditing(TRUE); instance->mAssetStatus = PREVIEW_ASSET_LOADED; + instance->mScriptEd->setAssetID(asset_id); } else { @@ -2039,9 +2044,9 @@ void LLLiveLSLEditor::onLoadComplete(LLVFS *vfs, const LLUUID& asset_id, delete floater_key; } -void LLLiveLSLEditor::loadScriptText(LLVFS *vfs, const LLUUID &uuid, LLAssetType::EType type) +void LLLiveLSLEditor::loadScriptText(const LLUUID &uuid, LLAssetType::EType type) { - LLVFile file(vfs, uuid, type); + LLFileSystem file(uuid, type); S32 file_length = file.getSize(); std::vector<char> buffer(file_length + 1); file.read((U8*)&buffer[0], file_length); @@ -2195,6 +2200,7 @@ void LLLiveLSLEditor::finishLSLUpload(LLUUID itemId, LLUUID taskId, LLUUID newAs if (preview) { preview->mItem->setAssetUUID(newAssetId); + preview->mScriptEd->setAssetID(newAssetId); // Bytecode save completed if (response["compiled"]) @@ -2265,12 +2271,14 @@ void LLLiveLSLEditor::saveIfNeeded(bool sync /*= true*/) if (!url.empty()) { std::string buffer(mScriptEd->mEditor->getText()); + LLUUID old_asset_id = mScriptEd->getAssetID(); LLResourceUploadInfo::ptr_t uploadInfo(std::make_shared<LLScriptAssetUpload>(mObjectUUID, mItemUUID, monoChecked() ? LLScriptAssetUpload::MONO : LLScriptAssetUpload::LSL2, isRunning, mScriptEd->getAssociatedExperience(), buffer, - [isRunning](LLUUID itemId, LLUUID taskId, LLUUID newAssetId, LLSD response) { - LLLiveLSLEditor::finishLSLUpload(itemId, taskId, newAssetId, response, isRunning); + [isRunning, old_asset_id](LLUUID itemId, LLUUID taskId, LLUUID newAssetId, LLSD response) { + LLFileSystem::removeFile(old_asset_id, LLAssetType::AT_LSL_TEXT); + LLLiveLSLEditor::finishLSLUpload(itemId, taskId, newAssetId, response, isRunning); })); LLViewerAssetUpload::EnqueueInventoryUpload(url, uploadInfo); diff --git a/indra/newview/llpreviewscript.h b/indra/newview/llpreviewscript.h index c1fea31063..f851ff6f3f 100644 --- a/indra/newview/llpreviewscript.h +++ b/indra/newview/llpreviewscript.h @@ -48,7 +48,6 @@ struct LLEntryAndEdCore; class LLMenuBarGL; class LLFloaterScriptSearch; class LLKeywordToken; -class LLVFS; class LLViewerInventoryItem; class LLScriptEdContainer; class LLFloaterGotoLine; @@ -143,6 +142,9 @@ public: void setItemRemoved(bool script_removed){mScriptRemoved = script_removed;}; + void setAssetID( const LLUUID& asset_id){ mAssetID = asset_id; }; + LLUUID getAssetID() { return mAssetID; } + private: void onBtnDynamicHelp(); void onBtnUndoChanges(); @@ -188,6 +190,7 @@ private: LLUUID mAssociatedExperience; BOOL mScriptRemoved; BOOL mSaveDialogShown; + LLUUID mAssetID; LLScriptEdContainer* mContainer; // parent view @@ -234,7 +237,7 @@ protected: static void onLoad(void* userdata); static void onSave(void* userdata, BOOL close_after_save); - static void onLoadComplete(LLVFS *vfs, const LLUUID& uuid, + static void onLoadComplete(const LLUUID& uuid, LLAssetType::EType type, void* user_data, S32 status, LLExtStat ext_status); @@ -295,13 +298,13 @@ private: static void onLoad(void* userdata); static void onSave(void* userdata, BOOL close_after_save); - static void onLoadComplete(LLVFS *vfs, const LLUUID& asset_uuid, + static void onLoadComplete(const LLUUID& asset_uuid, LLAssetType::EType type, void* user_data, S32 status, LLExtStat ext_status); static void onRunningCheckboxClicked(LLUICtrl*, void* userdata); static void onReset(void* userdata); - void loadScriptText(LLVFS *vfs, const LLUUID &uuid, LLAssetType::EType type); + void loadScriptText(const LLUUID &uuid, LLAssetType::EType type); static void onErrorList(LLUICtrl*, void* user_data); diff --git a/indra/newview/llsettingsvo.cpp b/indra/newview/llsettingsvo.cpp index 1e5b893cbc..58cbe0e20a 100644 --- a/indra/newview/llsettingsvo.cpp +++ b/indra/newview/llsettingsvo.cpp @@ -57,7 +57,7 @@ #include "llinventorymodel.h" #include "llassetstorage.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "lldrawpoolwater.h" #include <boost/algorithm/string/replace.hpp> @@ -292,18 +292,18 @@ void LLSettingsVOBase::onTaskAssetUploadComplete(LLUUID itemId, LLUUID taskId, L void LLSettingsVOBase::getSettingsAsset(const LLUUID &assetId, LLSettingsVOBase::asset_download_fn callback) { gAssetStorage->getAssetData(assetId, LLAssetType::AT_SETTINGS, - [callback](LLVFS *vfs, const LLUUID &asset_id, LLAssetType::EType, void *, S32 status, LLExtStat ext_status) - { onAssetDownloadComplete(vfs, asset_id, status, ext_status, callback); }, + [callback](const LLUUID &asset_id, LLAssetType::EType, void *, S32 status, LLExtStat ext_status) + { onAssetDownloadComplete(asset_id, status, ext_status, callback); }, nullptr, true); } -void LLSettingsVOBase::onAssetDownloadComplete(LLVFS *vfs, const LLUUID &asset_id, S32 status, LLExtStat ext_status, LLSettingsVOBase::asset_download_fn callback) +void LLSettingsVOBase::onAssetDownloadComplete(const LLUUID &asset_id, S32 status, LLExtStat ext_status, LLSettingsVOBase::asset_download_fn callback) { LLSettingsBase::ptr_t settings; if (!status) { - LLVFile file(vfs, asset_id, LLAssetType::AT_SETTINGS, LLVFile::READ); + LLFileSystem file(asset_id, LLAssetType::AT_SETTINGS, LLFileSystem::READ); S32 size = file.getSize(); std::string buffer(size + 1, '\0'); diff --git a/indra/newview/llsettingsvo.h b/indra/newview/llsettingsvo.h index 65136ad2f5..a1baf02fe7 100644 --- a/indra/newview/llsettingsvo.h +++ b/indra/newview/llsettingsvo.h @@ -38,7 +38,6 @@ #include "llextendedstatus.h" #include <boost/signals2.hpp> -class LLVFS; class LLInventoryItem; class LLGLSLShader; @@ -81,7 +80,7 @@ private: static void onAgentAssetUploadComplete(LLUUID itemId, LLUUID newAssetId, LLUUID newItemId, LLSD response, LLSettingsBase::ptr_t psettings, inventory_result_fn callback); static void onTaskAssetUploadComplete(LLUUID itemId, LLUUID taskId, LLUUID newAssetId, LLSD response, LLSettingsBase::ptr_t psettings, inventory_result_fn callback); - static void onAssetDownloadComplete(LLVFS *vfs, const LLUUID &asset_id, S32 status, LLExtStat ext_status, asset_download_fn callback); + static void onAssetDownloadComplete(const LLUUID &asset_id, S32 status, LLExtStat ext_status, asset_download_fn callback); }; //========================================================================= diff --git a/indra/newview/llsnapshotlivepreview.cpp b/indra/newview/llsnapshotlivepreview.cpp index 8369def968..8134187c21 100644 --- a/indra/newview/llsnapshotlivepreview.cpp +++ b/indra/newview/llsnapshotlivepreview.cpp @@ -31,6 +31,7 @@ #include "llagentbenefits.h" #include "llagentcamera.h" #include "llagentui.h" +#include "llfilesystem.h" #include "llcombobox.h" #include "llfloaterperms.h" #include "llfloaterreg.h" @@ -50,8 +51,6 @@ #include "llviewercontrol.h" #include "llviewermenufile.h" // upload_new_resource() #include "llviewerstats.h" -#include "llvfile.h" -#include "llvfs.h" #include "llwindow.h" #include "llworld.h" #include <boost/filesystem.hpp> @@ -1006,7 +1005,8 @@ void LLSnapshotLivePreview::saveTexture(BOOL outfit_snapshot, std::string name) if (formatted->encode(scaled, 0.0f)) { - LLVFile::writeFile(formatted->getData(), formatted->getDataSize(), gVFS, new_asset_id, LLAssetType::AT_TEXTURE); + LLFileSystem fmt_file(new_asset_id, LLAssetType::AT_TEXTURE, LLFileSystem::WRITE); + fmt_file.write(formatted->getData(), formatted->getDataSize()); std::string pos_string; LLAgentUI::buildLocationString(pos_string, LLAgentUI::LOCATION_FORMAT_FULL); std::string who_took_it; diff --git a/indra/newview/llstartup.cpp b/indra/newview/llstartup.cpp index 05d17b47bc..8e81843153 100644 --- a/indra/newview/llstartup.cpp +++ b/indra/newview/llstartup.cpp @@ -82,7 +82,6 @@ #include "llversioninfo.h" #include "llviewercontrol.h" #include "llviewerhelp.h" -#include "llvfs.h" #include "llxorcipher.h" // saved password, MAC address #include "llwindow.h" #include "message.h" @@ -271,7 +270,7 @@ bool login_alert_status(const LLSD& notification, const LLSD& response); void login_packet_failed(void**, S32 result); void use_circuit_callback(void**, S32 result); void register_viewer_callbacks(LLMessageSystem* msg); -void asset_callback_nothing(LLVFS*, const LLUUID&, LLAssetType::EType, void*, S32); +void asset_callback_nothing(const LLUUID&, LLAssetType::EType, void*, S32); bool callback_choose_gender(const LLSD& notification, const LLSD& response); void init_start_screen(S32 location_id); void release_start_screen(); @@ -585,7 +584,7 @@ bool idle_startup() // start the xfer system. by default, choke the downloads // a lot... const S32 VIEWER_MAX_XFER = 3; - start_xfer_manager(gVFS); + start_xfer_manager(); gXferManager->setMaxIncomingXfers(VIEWER_MAX_XFER); F32 xfer_throttle_bps = gSavedSettings.getF32("XferThrottle"); if (xfer_throttle_bps > 1.f) @@ -593,7 +592,7 @@ bool idle_startup() gXferManager->setUseAckThrottling(TRUE); gXferManager->setAckThrottleBPS(xfer_throttle_bps); } - gAssetStorage = new LLViewerAssetStorage(msg, gXferManager, gVFS, gStaticVFS); + gAssetStorage = new LLViewerAssetStorage(msg, gXferManager); F32 dropPercent = gSavedSettings.getF32("PacketDropPercentage"); @@ -1009,13 +1008,6 @@ bool idle_startup() gViewerWindow->revealIntroPanel(); - // Poke the VFS, which could potentially block for a while if - // Windows XP is acting up - set_startup_status(0.07f, LLTrans::getString("LoginVerifyingCache"), LLStringUtil::null); - display_startup(); - - gVFS->pokeFiles(); - LLStartUp::setStartupState( STATE_LOGIN_AUTH_INIT ); return FALSE; @@ -2604,7 +2596,7 @@ void register_viewer_callbacks(LLMessageSystem* msg) msg->setHandlerFuncFast(_PREHASH_FeatureDisabled, process_feature_disabled_message); } -void asset_callback_nothing(LLVFS*, const LLUUID&, LLAssetType::EType, void*, S32) +void asset_callback_nothing(const LLUUID&, LLAssetType::EType, void*, S32) { // nothing } diff --git a/indra/newview/lltexturecache.cpp b/indra/newview/lltexturecache.cpp index a9f19dc32d..d4fc6f3de2 100644 --- a/indra/newview/lltexturecache.cpp +++ b/indra/newview/lltexturecache.cpp @@ -55,6 +55,7 @@ const S32 TEXTURE_FAST_CACHE_ENTRY_OVERHEAD = sizeof(S32) * 4; //w, h, c, level const S32 TEXTURE_FAST_CACHE_DATA_SIZE = 16 * 16 * 4; const S32 TEXTURE_FAST_CACHE_ENTRY_SIZE = TEXTURE_FAST_CACHE_DATA_SIZE + TEXTURE_FAST_CACHE_ENTRY_OVERHEAD; const F32 TEXTURE_LAZY_PURGE_TIME_LIMIT = .004f; // 4ms. Would be better to autoadjust, but there is a major cache rework in progress. +const F32 TEXTURE_PRUNING_MAX_TIME = 15.f; class LLTextureCacheWorker : public LLWorkerClass { @@ -1551,7 +1552,6 @@ void LLTextureCache::readHeaderCache() if (num_entries - empty_entries > sCacheMaxEntries) { // Special case: cache size was reduced, need to remove entries - // Note: After we prune entries, we will call this again and create the LRU U32 entries_to_purge = (num_entries - empty_entries) - sCacheMaxEntries; LL_INFOS() << "Texture Cache Entries: " << num_entries << " Max: " << sCacheMaxEntries << " Empty: " << empty_entries << " Purging: " << entries_to_purge << LL_ENDL; // We can exit the following loop with the given condition, since if we'd reach the end of the lru set we'd have: @@ -1564,7 +1564,7 @@ void LLTextureCache::readHeaderCache() ++iter; } } - else + { S32 lru_entries = (S32)((F32)sCacheMaxEntries * TEXTURE_CACHE_LRU_SIZE); for (std::set<lru_data_t>::iterator iter = lru.begin(); iter != lru.end(); ++iter) @@ -1578,30 +1578,19 @@ void LLTextureCache::readHeaderCache() if (purge_list.size() > 0) { + LLTimer timer; for (std::set<U32>::iterator iter = purge_list.begin(); iter != purge_list.end(); ++iter) { std::string tex_filename = getTextureFileName(entries[*iter].mID); removeEntry((S32)*iter, entries[*iter], tex_filename); - } - // If we removed any entries, we need to rebuild the entries list, - // write the header, and call this again - std::vector<Entry> new_entries; - for (U32 i=0; i<num_entries; i++) - { - const Entry& entry = entries[i]; - if (entry.mImageSize > 0) + + //make sure that pruning entries doesn't take too much time + if (timer.getElapsedTimeF32() > TEXTURE_PRUNING_MAX_TIME) { - new_entries.push_back(entry); + break; } } - mFreeList.clear(); // recreating list, no longer valid. - llassert_always(new_entries.size() <= sCacheMaxEntries); - mHeaderEntriesInfo.mEntries = new_entries.size(); - writeEntriesHeader(); - writeEntriesAndClose(new_entries); - mHeaderMutex.unlock(); // unlock the mutex before calling again - readHeaderCache(); // repeat with new entries file - mHeaderMutex.lock(); + writeEntriesAndClose(entries); } else { @@ -1724,7 +1713,7 @@ void LLTextureCache::purgeTexturesLazy(F32 time_limit_sec) } S64 cache_size = mTexturesSizeTotal; - S64 purged_cache_size = (sCacheMaxTexturesSize * (S64)((1.f - TEXTURE_CACHE_PURGE_AMOUNT) * 100)) / 100; + S64 purged_cache_size = (llmax(cache_size, sCacheMaxTexturesSize) * (S64)((1.f - TEXTURE_CACHE_PURGE_AMOUNT) * 100)) / 100; for (time_idx_set_t::iterator iter = time_idx_set.begin(); iter != time_idx_set.end(); ++iter) { @@ -1820,21 +1809,26 @@ void LLTextureCache::purgeTextures(bool validate) } S64 cache_size = mTexturesSizeTotal; - S64 purged_cache_size = (sCacheMaxTexturesSize * (S64)((1.f-TEXTURE_CACHE_PURGE_AMOUNT)*100)) / 100; + S64 purged_cache_size = (llmax(cache_size, sCacheMaxTexturesSize) * (S64)((1.f - TEXTURE_CACHE_PURGE_AMOUNT) * 100)) / 100; S32 purge_count = 0; for (time_idx_set_t::iterator iter = time_idx_set.begin(); iter != time_idx_set.end(); ++iter) { S32 idx = iter->second; bool purge_entry = false; - if (validate) + + if (cache_size >= purged_cache_size) + { + purge_entry = true; + } + else if (validate) { // make sure file exists and is the correct size U32 uuididx = entries[idx].mID.mData[0]; if (uuididx == validate_idx) { - std::string filename = getTextureFileName(entries[idx].mID); - LL_DEBUGS("TextureCache") << "Validating: " << filename << "Size: " << entries[idx].mBodySize << LL_ENDL; + std::string filename = getTextureFileName(entries[idx].mID); + LL_DEBUGS("TextureCache") << "Validating: " << filename << "Size: " << entries[idx].mBodySize << LL_ENDL; // mHeaderAPRFilePoolp because this is under header mutex in main thread S32 bodysize = LLAPRFile::size(filename, mHeaderAPRFilePoolp); if (bodysize != entries[idx].mBodySize) @@ -1844,10 +1838,6 @@ void LLTextureCache::purgeTextures(bool validate) } } } - else if (cache_size >= purged_cache_size) - { - purge_entry = true; - } else { break; diff --git a/indra/newview/llviewerassetstorage.cpp b/indra/newview/llviewerassetstorage.cpp index 64d9ce62c5..0f102411d5 100644 --- a/indra/newview/llviewerassetstorage.cpp +++ b/indra/newview/llviewerassetstorage.cpp @@ -28,8 +28,7 @@ #include "llviewerassetstorage.h" -#include "llvfile.h" -#include "llvfs.h" +#include "llfilesystem.h" #include "message.h" #include "llagent.h" @@ -104,10 +103,8 @@ public: ///---------------------------------------------------------------------------- // Unused? -LLViewerAssetStorage::LLViewerAssetStorage(LLMessageSystem *msg, LLXferManager *xfer, - LLVFS *vfs, LLVFS *static_vfs, - const LLHost &upstream_host) - : LLAssetStorage(msg, xfer, vfs, static_vfs, upstream_host), +LLViewerAssetStorage::LLViewerAssetStorage(LLMessageSystem *msg, LLXferManager *xfer, const LLHost &upstream_host) + : LLAssetStorage(msg, xfer, upstream_host), mAssetCoroCount(0), mCountRequests(0), mCountStarted(0), @@ -118,10 +115,8 @@ LLViewerAssetStorage::LLViewerAssetStorage(LLMessageSystem *msg, LLXferManager * LLCoprocedureManager::instance().initializePool(VIEWER_ASSET_STORAGE_CORO_POOL); } - -LLViewerAssetStorage::LLViewerAssetStorage(LLMessageSystem *msg, LLXferManager *xfer, - LLVFS *vfs, LLVFS *static_vfs) - : LLAssetStorage(msg, xfer, vfs, static_vfs), +LLViewerAssetStorage::LLViewerAssetStorage(LLMessageSystem *msg, LLXferManager *xfer) + : LLAssetStorage(msg, xfer), mAssetCoroCount(0), mCountRequests(0), mCountStarted(0), @@ -167,13 +162,13 @@ void LLViewerAssetStorage::storeAssetData( if (mUpstreamHost.isOk()) { - if (mVFS->getExists(asset_id, asset_type)) + if (LLFileSystem::getExists(asset_id, asset_type)) { // Pack data into this packet if we can fit it. U8 buffer[MTUBYTES]; buffer[0] = 0; - LLVFile vfile(mVFS, asset_id, asset_type, LLVFile::READ); + LLFileSystem vfile(asset_id, asset_type, LLFileSystem::READ); S32 asset_size = vfile.getSize(); LLAssetRequest *req = new LLAssetRequest(asset_id, asset_type); @@ -182,22 +177,20 @@ void LLViewerAssetStorage::storeAssetData( if (asset_size < 1) { - // This can happen if there's a bug in our code or if the VFS has been corrupted. - LL_WARNS("AssetStorage") << "LLViewerAssetStorage::storeAssetData() Data _should_ already be in the VFS, but it's not! " << asset_id << LL_ENDL; - // LLAssetStorage metric: Zero size VFS - reportMetric( asset_id, asset_type, LLStringUtil::null, LLUUID::null, 0, MR_ZERO_SIZE, __FILE__, __LINE__, "The file didn't exist or was zero length (VFS - can't tell which)" ); + // This can happen if there's a bug in our code or if the cache has been corrupted. + LL_WARNS("AssetStorage") << "LLViewerAssetStorage::storeAssetData() Data _should_ already be in the cache, but it's not! " << asset_id << LL_ENDL; delete req; if (callback) { - callback(asset_id, user_data, LL_ERR_ASSET_REQUEST_FAILED, LLExtStat::VFS_CORRUPT); + callback(asset_id, user_data, LL_ERR_ASSET_REQUEST_FAILED, LLExtStat::CACHE_CORRUPT); } return; } else { // LLAssetStorage metric: Successful Request - S32 size = mVFS->getSize(asset_id, asset_type); + S32 size = LLFileSystem::getFileSize(asset_id, asset_type); const char *message = "Added to upload queue"; reportMetric( asset_id, asset_type, LLStringUtil::null, LLUUID::null, size, MR_OKAY, __FILE__, __LINE__, message ); @@ -211,7 +204,7 @@ void LLViewerAssetStorage::storeAssetData( } } - // Read the data from the VFS if it'll fit in this packet. + // Read the data from the cache if it'll fit in this packet. if (asset_size + 100 < MTUBYTES) { BOOL res = vfile.read(buffer, asset_size); /* Flawfinder: ignore */ @@ -224,14 +217,11 @@ void LLViewerAssetStorage::storeAssetData( } else { - LL_WARNS("AssetStorage") << "Probable corruption in VFS file, aborting store asset data" << LL_ENDL; - - // LLAssetStorage metric: VFS corrupt - bogus size - reportMetric( asset_id, asset_type, LLStringUtil::null, LLUUID::null, asset_size, MR_VFS_CORRUPTION, __FILE__, __LINE__, "VFS corruption" ); + LL_WARNS("AssetStorage") << "Probable corruption in cache file, aborting store asset data" << LL_ENDL; if (callback) { - callback(asset_id, user_data, LL_ERR_ASSET_REQUEST_NONEXISTENT_FILE, LLExtStat::VFS_CORRUPT); + callback(asset_id, user_data, LL_ERR_ASSET_REQUEST_NONEXISTENT_FILE, LLExtStat::CACHE_CORRUPT); } return; } @@ -254,8 +244,7 @@ void LLViewerAssetStorage::storeAssetData( else { LL_WARNS("AssetStorage") << "AssetStorage: attempt to upload non-existent vfile " << asset_id << ":" << LLAssetType::lookup(asset_type) << LL_ENDL; - // LLAssetStorage metric: Zero size VFS - reportMetric( asset_id, asset_type, LLStringUtil::null, LLUUID::null, 0, MR_ZERO_SIZE, __FILE__, __LINE__, "The file didn't exist or was zero length (VFS - can't tell which)" ); + reportMetric( asset_id, asset_type, LLStringUtil::null, LLUUID::null, 0, MR_ZERO_SIZE, __FILE__, __LINE__, "The file didn't exist or was zero length (cache - can't tell which)" ); if (callback) { callback(asset_id, user_data, LL_ERR_ASSET_REQUEST_NONEXISTENT_FILE, LLExtStat::NONEXISTENT_FILE); @@ -288,7 +277,6 @@ void LLViewerAssetStorage::storeAssetData( if(filename.empty()) { // LLAssetStorage metric: no filename - reportMetric( LLUUID::null, asset_type, LLStringUtil::null, LLUUID::null, 0, MR_VFS_CORRUPTION, __FILE__, __LINE__, "Filename missing" ); LL_ERRS() << "No filename specified" << LL_ENDL; return; } @@ -313,9 +301,7 @@ void LLViewerAssetStorage::storeAssetData( legacy->mUpCallback = callback; legacy->mUserData = user_data; - LLVFile file(mVFS, asset_id, asset_type, LLVFile::WRITE); - - file.setMaxSize(size); + LLFileSystem file(asset_id, asset_type, LLFileSystem::APPEND); const S32 buf_size = 65536; U8 copy_buf[buf_size]; @@ -584,21 +570,20 @@ void LLViewerAssetStorage::assetRequestCoro( // case. LLUUID temp_id; temp_id.generate(); - LLVFile vf(gAssetStorage->mVFS, temp_id, atype, LLVFile::WRITE); - vf.setMaxSize(size); + LLFileSystem vf(temp_id, atype, LLFileSystem::WRITE); req->mBytesFetched = size; if (!vf.write(raw.data(),size)) { // TODO asset-http: handle error LL_WARNS("ViewerAsset") << "Failure in vf.write()" << LL_ENDL; result_code = LL_ERR_ASSET_REQUEST_FAILED; - ext_status = LLExtStat::VFS_CORRUPT; + ext_status = LLExtStat::CACHE_CORRUPT; } else if (!vf.rename(uuid, atype)) { LL_WARNS("ViewerAsset") << "rename failed" << LL_ENDL; result_code = LL_ERR_ASSET_REQUEST_FAILED; - ext_status = LLExtStat::VFS_CORRUPT; + ext_status = LLExtStat::CACHE_CORRUPT; } else { diff --git a/indra/newview/llviewerassetstorage.h b/indra/newview/llviewerassetstorage.h index c1a5534b81..af7fbb5fbf 100644 --- a/indra/newview/llviewerassetstorage.h +++ b/indra/newview/llviewerassetstorage.h @@ -30,18 +30,16 @@ #include "llassetstorage.h" #include "llcorehttputil.h" -class LLVFile; +class LLFileSystem; class LLViewerAssetRequest; class LLViewerAssetStorage : public LLAssetStorage { public: - LLViewerAssetStorage(LLMessageSystem *msg, LLXferManager *xfer, - LLVFS *vfs, LLVFS *static_vfs, const LLHost &upstream_host); + LLViewerAssetStorage(LLMessageSystem *msg, LLXferManager *xfer, const LLHost &upstream_host); - LLViewerAssetStorage(LLMessageSystem *msg, LLXferManager *xfer, - LLVFS *vfs, LLVFS *static_vfs); + LLViewerAssetStorage(LLMessageSystem *msg, LLXferManager *xfer); ~LLViewerAssetStorage(); diff --git a/indra/newview/llviewerassetupload.cpp b/indra/newview/llviewerassetupload.cpp index 0df6811f6a..3f7e8531fb 100644 --- a/indra/newview/llviewerassetupload.cpp +++ b/indra/newview/llviewerassetupload.cpp @@ -45,7 +45,7 @@ #include "llviewerassetupload.h" #include "llappviewer.h" #include "llviewerstats.h" -#include "llvfile.h" +#include "llfilesystem.h" #include "llgesturemgr.h" #include "llpreviewnotecard.h" #include "llpreviewgesture.h" @@ -467,15 +467,13 @@ LLSD LLNewFileResourceUploadInfo::exportTempFile() setAssetType(assetType); - // copy this file into the vfs for upload + // copy this file into the cache for upload S32 file_size; LLAPRFile infile; infile.open(filename, LL_APR_RB, NULL, &file_size); if (infile.getFileHandle()) { - LLVFile file(gVFS, getAssetId(), assetType, LLVFile::WRITE); - - file.setMaxSize(file_size); + LLFileSystem file(getAssetId(), assetType, LLFileSystem::APPEND); const S32 buf_size = 65536; U8 copy_buf[buf_size]; @@ -507,7 +505,7 @@ LLBufferedAssetUploadInfo::LLBufferedAssetUploadInfo(LLUUID itemId, LLAssetType: mContents(buffer), mInvnFinishFn(finish), mTaskFinishFn(nullptr), - mStoredToVFS(false) + mStoredToCache(false) { setItemId(itemId); setAssetType(assetType); @@ -521,7 +519,7 @@ LLBufferedAssetUploadInfo::LLBufferedAssetUploadInfo(LLUUID itemId, LLPointer<LL mContents(), mInvnFinishFn(finish), mTaskFinishFn(nullptr), - mStoredToVFS(false) + mStoredToCache(false) { setItemId(itemId); @@ -555,7 +553,7 @@ LLBufferedAssetUploadInfo::LLBufferedAssetUploadInfo(LLUUID taskId, LLUUID itemI mContents(buffer), mInvnFinishFn(nullptr), mTaskFinishFn(finish), - mStoredToVFS(false) + mStoredToCache(false) { setItemId(itemId); setAssetType(assetType); @@ -566,13 +564,12 @@ LLSD LLBufferedAssetUploadInfo::prepareUpload() if (getAssetId().isNull()) generateNewAssetId(); - LLVFile file(gVFS, getAssetId(), getAssetType(), LLVFile::APPEND); + LLFileSystem file(getAssetId(), getAssetType(), LLFileSystem::APPEND); S32 size = mContents.length() + 1; - file.setMaxSize(size); file.write((U8*)mContents.c_str(), size); - mStoredToVFS = true; + mStoredToCache = true; return LLSD().with("success", LLSD::Boolean(true)); } @@ -595,10 +592,10 @@ LLUUID LLBufferedAssetUploadInfo::finishUpload(LLSD &result) LLUUID newAssetId = result["new_asset"].asUUID(); LLUUID itemId = getItemId(); - if (mStoredToVFS) + if (mStoredToCache) { LLAssetType::EType assetType(getAssetType()); - gVFS->renameFile(getAssetId(), assetType, newAssetId, assetType); + LLFileSystem::renameFile(getAssetId(), assetType, newAssetId, assetType); } if (mTaskUpload) diff --git a/indra/newview/llviewerassetupload.h b/indra/newview/llviewerassetupload.h index d9eacf3167..e56ba7d8f7 100644 --- a/indra/newview/llviewerassetupload.h +++ b/indra/newview/llviewerassetupload.h @@ -197,7 +197,7 @@ private: std::string mContents; invnUploadFinish_f mInvnFinishFn; taskUploadFinish_f mTaskFinishFn; - bool mStoredToVFS; + bool mStoredToCache; }; //------------------------------------------------------------------------- diff --git a/indra/newview/llviewercontrol.cpp b/indra/newview/llviewercontrol.cpp index 89c600fc2c..bc425123e1 100644 --- a/indra/newview/llviewercontrol.cpp +++ b/indra/newview/llviewercontrol.cpp @@ -162,6 +162,17 @@ static bool handleSetShaderChanged(const LLSD& newvalue) return true; } +static bool handleAvatarVPChanged(const LLSD& newvalue) +{ + LLRenderTarget::sUseFBO = newvalue.asBoolean() + && gSavedSettings.getBOOL("RenderObjectBump") + && gSavedSettings.getBOOL("RenderTransparentWater") + && gSavedSettings.getBOOL("RenderDeferred"); + + handleSetShaderChanged(LLSD()); + return true; +} + static bool handleRenderPerfTestChanged(const LLSD& newvalue) { bool status = !newvalue.asBoolean(); @@ -201,7 +212,10 @@ static bool handleRenderPerfTestChanged(const LLSD& newvalue) bool handleRenderTransparentWaterChanged(const LLSD& newvalue) { - LLRenderTarget::sUseFBO = newvalue.asBoolean(); + LLRenderTarget::sUseFBO = newvalue.asBoolean() + && gSavedSettings.getBOOL("RenderObjectBump") + && gSavedSettings.getBOOL("RenderAvatarVP") + && gSavedSettings.getBOOL("RenderDeferred"); if (gPipeline.isInit()) { gPipeline.updateRenderTransparentWater(); @@ -454,7 +468,10 @@ static bool handleRenderDeferredChanged(const LLSD& newvalue) // static bool handleRenderBumpChanged(const LLSD& newval) { - LLRenderTarget::sUseFBO = newval.asBoolean(); + LLRenderTarget::sUseFBO = newval.asBoolean() + && gSavedSettings.getBOOL("RenderTransparentWater") + && gSavedSettings.getBOOL("RenderAvatarVP") + && gSavedSettings.getBOOL("RenderDeferred"); if (gPipeline.isInit()) { gPipeline.updateRenderBump(); @@ -648,7 +665,7 @@ void settings_setup_listeners() gSavedSettings.getControl("OctreeAttachmentSizeFactor")->getSignal()->connect(boost::bind(&handleRepartition, _2)); gSavedSettings.getControl("RenderMaxTextureIndex")->getSignal()->connect(boost::bind(&handleSetShaderChanged, _2)); gSavedSettings.getControl("RenderUseTriStrips")->getSignal()->connect(boost::bind(&handleResetVertexBuffersChanged, _2)); - gSavedSettings.getControl("RenderAvatarVP")->getSignal()->connect(boost::bind(&handleSetShaderChanged, _2)); + gSavedSettings.getControl("RenderAvatarVP")->getSignal()->connect(boost::bind(&handleAvatarVPChanged, _2)); gSavedSettings.getControl("RenderUIBuffer")->getSignal()->connect(boost::bind(&handleWindowResized, _2)); gSavedSettings.getControl("RenderDepthOfField")->getSignal()->connect(boost::bind(&handleReleaseGLBufferChanged, _2)); gSavedSettings.getControl("RenderFSAASamples")->getSignal()->connect(boost::bind(&handleReleaseGLBufferChanged, _2)); diff --git a/indra/newview/llviewerfloaterreg.cpp b/indra/newview/llviewerfloaterreg.cpp index 603cc00062..677b55e49f 100644 --- a/indra/newview/llviewerfloaterreg.cpp +++ b/indra/newview/llviewerfloaterreg.cpp @@ -33,6 +33,7 @@ #include "llcommandhandler.h" #include "llcompilequeue.h" #include "llfasttimerview.h" +#include "llfloater360capture.h" #include "llfloaterabout.h" #include "llfloateraddpaymentmethod.h" #include "llfloaterauction.h" @@ -196,6 +197,7 @@ void LLViewerFloaterReg::registerFloaters() // *NOTE: Please keep these alphabetized for easier merges LLFloaterAboutUtil::registerFloater(); + LLFloaterReg::add("360capture", "floater_360capture.xml", (LLFloaterBuildFunc)&LLFloaterReg::build<LLFloater360Capture>); LLFloaterReg::add("block_timers", "floater_fast_timers.xml", (LLFloaterBuildFunc)&LLFloaterReg::build<LLFastTimerView>); LLFloaterReg::add("about_land", "floater_about_land.xml", (LLFloaterBuildFunc)&LLFloaterReg::build<LLFloaterLand>); LLFloaterReg::add("add_payment_method", "floater_add_payment_method.xml", (LLFloaterBuildFunc)&LLFloaterReg::build<LLFloaterAddPaymentMethod>); diff --git a/indra/newview/llviewermedia.cpp b/indra/newview/llviewermedia.cpp index d0cf8ea407..54c2099ac9 100644 --- a/indra/newview/llviewermedia.cpp +++ b/indra/newview/llviewermedia.cpp @@ -1752,8 +1752,16 @@ LLPluginClassMedia* LLViewerMediaImpl::newSourceFromMediaType(std::string media_ media_source->cookies_enabled( cookies_enabled || clean_browser); // collect 'javascript enabled' setting from prefs and send to embedded browser - bool javascript_enabled = gSavedSettings.getBOOL( "BrowserJavascriptEnabled" ); - media_source->setJavascriptEnabled( javascript_enabled || clean_browser); + bool javascript_enabled = gSavedSettings.getBOOL("BrowserJavascriptEnabled"); + media_source->setJavascriptEnabled(javascript_enabled || clean_browser); + + // collect 'web security disabled' (see Chrome --web-security-disabled) setting from prefs and send to embedded browser + bool web_security_disabled = gSavedSettings.getBOOL("BrowserWebSecurityDisabled"); + media_source->setWebSecurityDisabled(web_security_disabled || clean_browser); + + // collect setting indicates if local file access from file URLs is allowed from prefs and send to embedded browser + bool file_access_from_file_urls = gSavedSettings.getBOOL("BrowserFileAccessFromFileUrls"); + media_source->setFileAccessFromFileUrlsEnabled(file_access_from_file_urls || clean_browser); // As of SL-15559 PDF files do not load in CEF v91 we enable plugins // but explicitly disable Flash (PDF support in CEF is now treated as a plugin) @@ -1915,6 +1923,15 @@ void LLViewerMediaImpl::loadURI() } ////////////////////////////////////////////////////////////////////////////////////////// +void LLViewerMediaImpl::executeJavaScript(const std::string& code) +{ + if (mMediaSource) + { + mMediaSource->executeJavaScript(code); + } +} + +////////////////////////////////////////////////////////////////////////////////////////// void LLViewerMediaImpl::setSize(int width, int height) { mMediaWidth = width; @@ -3219,8 +3236,19 @@ void LLViewerMediaImpl::handleMediaEvent(LLPluginClassMedia* plugin, LLPluginCla case LLViewerMediaObserver::MEDIA_EVENT_FILE_DOWNLOAD: { - //llinfos << "Media event - file download requested - filename is " << self->getFileDownloadFilename() << llendl; - LLNotificationsUtil::add("MediaFileDownloadUnsupported"); + LL_DEBUGS("Media") << "Media event - file download requested - filename is " << plugin->getFileDownloadFilename() << LL_ENDL; + // pick a file from SAVE FILE dialog + + // need a better algorithm that this or else, pass in type of save type + // from event that initiated it - this is okay for now - only thing + // that saves is 360s + std::string suggested_filename = plugin->getFileDownloadFilename(); + LLFilePicker::ESaveFilter filter = LLFilePicker::FFSAVE_ALL; + if (suggested_filename.find(".jpg") != std::string::npos || suggested_filename.find(".jpeg") != std::string::npos) + filter = LLFilePicker::FFSAVE_JPEG; + if (suggested_filename.find(".png") != std::string::npos) + filter = LLFilePicker::FFSAVE_PNG; + init_threaded_picker_save_dialog(plugin, filter, suggested_filename); } break; diff --git a/indra/newview/llviewermedia.h b/indra/newview/llviewermedia.h index 8bf1ad2441..71cec5125d 100644 --- a/indra/newview/llviewermedia.h +++ b/indra/newview/llviewermedia.h @@ -207,6 +207,7 @@ public: bool initializeMedia(const std::string& mime_type); bool initializePlugin(const std::string& media_type); void loadURI(); + void executeJavaScript(const std::string& code); LLPluginClassMedia* getMediaPlugin() { return mMediaSource.get(); } void setSize(int width, int height); diff --git a/indra/newview/llviewermedia_streamingaudio.cpp b/indra/newview/llviewermedia_streamingaudio.cpp index 3ccf3070ab..d3e24aece5 100644 --- a/indra/newview/llviewermedia_streamingaudio.cpp +++ b/indra/newview/llviewermedia_streamingaudio.cpp @@ -33,10 +33,8 @@ #include "llviewermedia_streamingaudio.h" #include "llmimetypes.h" -#include "llvfs.h" #include "lldir.h" - LLStreamingAudio_MediaPlugins::LLStreamingAudio_MediaPlugins() : mMediaPlugin(NULL), mGain(1.0) diff --git a/indra/newview/llviewermenu.cpp b/indra/newview/llviewermenu.cpp index 635b731193..01a4bd587d 100644 --- a/indra/newview/llviewermenu.cpp +++ b/indra/newview/llviewermenu.cpp @@ -1273,12 +1273,55 @@ class LLAdvancedDumpScriptedCamera : public view_listener_t class LLAdvancedDumpRegionObjectCache : public view_listener_t { bool handleEvent(const LLSD& userdata) -{ + { handle_dump_region_object_cache(NULL); return true; } }; +class LLAdvancedInterestListFullUpdate : public view_listener_t +{ + bool handleEvent(const LLSD& userdata) + { + LLSD request; + LLSD body; + static bool using_360 = false; + + if (using_360) + { + body["mode"] = LLSD::String("default"); + } + else + { + body["mode"] = LLSD::String("360"); + } + using_360 = !using_360; + + if (gAgent.requestPostCapability("InterestList", body, [](const LLSD& response) + { + LL_INFOS("360Capture") << + "InterestList capability responded: \n" << + ll_pretty_print_sd(response) << + LL_ENDL; + })) + { + LL_INFOS("360Capture") << + "Successfully posted an InterestList capability request with payload: \n" << + ll_pretty_print_sd(body) << + LL_ENDL; + return true; + } + else + { + LL_INFOS("360Capture") << + "Unable to post an InterestList capability request with payload: \n" << + ll_pretty_print_sd(body) << + LL_ENDL; + return false; + } + } +}; + class LLAdvancedBuyCurrencyTest : public view_listener_t { bool handleEvent(const LLSD& userdata) @@ -2319,11 +2362,10 @@ class LLAdvancedLeaveAdminStatus : public view_listener_t // Advanced > Debugging // ////////////////////////// - class LLAdvancedForceErrorBreakpoint : public view_listener_t { bool handleEvent(const LLSD& userdata) - { + { force_error_breakpoint(NULL); return true; } @@ -9203,6 +9245,7 @@ void initialize_menus() // Advanced > World view_listener_t::addMenu(new LLAdvancedDumpScriptedCamera(), "Advanced.DumpScriptedCamera"); view_listener_t::addMenu(new LLAdvancedDumpRegionObjectCache(), "Advanced.DumpRegionObjectCache"); + view_listener_t::addMenu(new LLAdvancedInterestListFullUpdate(), "Advanced.InterestListFullUpdate"); // Advanced > UI commit.add("Advanced.WebBrowserTest", boost::bind(&handle_web_browser_test, _2)); // sigh! this one opens the MEDIA browser diff --git a/indra/newview/llviewermenufile.cpp b/indra/newview/llviewermenufile.cpp index 15181dcd9f..4efc3d1cb3 100644 --- a/indra/newview/llviewermenufile.cpp +++ b/indra/newview/llviewermenufile.cpp @@ -53,8 +53,6 @@ #include "llviewercontrol.h" // gSavedSettings #include "llviewertexturelist.h" #include "lluictrlfactory.h" -#include "llvfile.h" -#include "llvfs.h" #include "llviewerinventory.h" #include "llviewermenu.h" // gMenuHolder #include "llviewerparcelmgr.h" diff --git a/indra/newview/llviewermessage.cpp b/indra/newview/llviewermessage.cpp index 9d85586dae..14442c9705 100644 --- a/indra/newview/llviewermessage.cpp +++ b/indra/newview/llviewermessage.cpp @@ -45,8 +45,7 @@ #include "llteleportflags.h" #include "lltoastnotifypanel.h" #include "lltransactionflags.h" -#include "llvfile.h" -#include "llvfs.h" +#include "llfilesystem.h" #include "llxfermanager.h" #include "mean_collision_data.h" @@ -3746,6 +3745,7 @@ void process_kill_object(LLMessageSystem *mesgsys, void **user_data) { LLColor4 color(0.f,1.f,0.f,1.f); gPipeline.addDebugBlip(objectp->getPositionAgent(), color); + LL_DEBUGS("MessageBlip") << "Kill blip for local " << local_id << " at " << objectp->getPositionAgent() << LL_ENDL; } // Do the kill @@ -6430,15 +6430,12 @@ void process_user_info_reply(LLMessageSystem* msg, void**) << "wrong agent id." << LL_ENDL; } - BOOL im_via_email; - msg->getBOOLFast(_PREHASH_UserData, _PREHASH_IMViaEMail, im_via_email); std::string email; msg->getStringFast(_PREHASH_UserData, _PREHASH_EMail, email); std::string dir_visibility; msg->getString( "UserData", "DirectoryVisibility", dir_visibility); - // For Message based user info information the is_verified is assumed to be false. - LLFloaterPreference::updateUserInfo(dir_visibility, im_via_email, false); + LLFloaterPreference::updateUserInfo(dir_visibility); LLFloaterSnapshot::setAgentEmail(email); } @@ -6857,16 +6854,15 @@ void process_covenant_reply(LLMessageSystem* msg, void**) } } -void onCovenantLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, - LLAssetType::EType type, - void* user_data, S32 status, LLExtStat ext_status) +void onCovenantLoadComplete(const LLUUID& asset_uuid, + LLAssetType::EType type, + void* user_data, S32 status, LLExtStat ext_status) { LL_DEBUGS("Messaging") << "onCovenantLoadComplete()" << LL_ENDL; std::string covenant_text; if(0 == status) { - LLVFile file(vfs, asset_uuid, type, LLVFile::READ); + LLFileSystem file(asset_uuid, type, LLFileSystem::READ); S32 file_length = file.getSize(); diff --git a/indra/newview/llviewermessage.h b/indra/newview/llviewermessage.h index 78829a6a56..1e5a69ae13 100644 --- a/indra/newview/llviewermessage.h +++ b/indra/newview/llviewermessage.h @@ -47,7 +47,6 @@ class LLInventoryObject; class LLInventoryItem; class LLMeanCollisionData; class LLMessageSystem; -class LLVFS; class LLViewerObject; class LLViewerRegion; @@ -189,8 +188,7 @@ void process_script_dialog(LLMessageSystem* msg, void**); void process_load_url(LLMessageSystem* msg, void**); void process_script_teleport_request(LLMessageSystem* msg, void**); void process_covenant_reply(LLMessageSystem* msg, void**); -void onCovenantLoadComplete(LLVFS *vfs, - const LLUUID& asset_uuid, +void onCovenantLoadComplete(const LLUUID& asset_uuid, LLAssetType::EType type, void* user_data, S32 status, LLExtStat ext_status); diff --git a/indra/newview/llviewerobject.cpp b/indra/newview/llviewerobject.cpp index b88baf6aa7..31e80eb865 100644 --- a/indra/newview/llviewerobject.cpp +++ b/indra/newview/llviewerobject.cpp @@ -2402,6 +2402,7 @@ U32 LLViewerObject::processUpdateMessage(LLMessageSystem *mesgsys, color.setVec(1.f, 0.f, 0.f, 1.f); } gPipeline.addDebugBlip(getPositionAgent(), color); + LL_DEBUGS("MessageBlip") << "Update type " << (S32)update_type << " blip for local " << mLocalID << " at " << getPositionAgent() << LL_ENDL; } const F32 MAG_CUTOFF = F_APPROXIMATELY_ZERO; diff --git a/indra/newview/llviewerprecompiledheaders.h b/indra/newview/llviewerprecompiledheaders.h index bbbacce8fa..e378c2448a 100644 --- a/indra/newview/llviewerprecompiledheaders.h +++ b/indra/newview/llviewerprecompiledheaders.h @@ -101,7 +101,6 @@ #include "v4math.h" #include "xform.h" -// Library includes from llvfs #include "lldir.h" // Library includes from llmessage project diff --git a/indra/newview/llviewerregion.cpp b/indra/newview/llviewerregion.cpp index 198fe1563c..0f409701d1 100644 --- a/indra/newview/llviewerregion.cpp +++ b/indra/newview/llviewerregion.cpp @@ -2968,6 +2968,8 @@ void LLViewerRegionImpl::buildCapabilityNames(LLSD& capabilityNames) capabilityNames.append("IncrementCOFVersion"); AISAPI::getCapNames(capabilityNames); + capabilityNames.append("InterestList"); + capabilityNames.append("GetDisplayNames"); capabilityNames.append("GetExperiences"); capabilityNames.append("AgentExperiences"); diff --git a/indra/newview/llviewerstats.cpp b/indra/newview/llviewerstats.cpp index 314c1a1f1e..6471e89233 100644 --- a/indra/newview/llviewerstats.cpp +++ b/indra/newview/llviewerstats.cpp @@ -33,7 +33,6 @@ #include "llfloaterreg.h" #include "llmemory.h" #include "lltimer.h" -#include "llvfile.h" #include "llappviewer.h" @@ -146,7 +145,6 @@ LLTrace::SampleStatHandle<> FPS_SAMPLE("fpssample"), VISIBLE_AVATARS("visibleavatars", "Visible Avatars"), SHADER_OBJECTS("shaderobjects", "Object Shaders"), DRAW_DISTANCE("drawdistance", "Draw Distance"), - PENDING_VFS_OPERATIONS("vfspendingoperations"), WINDOW_WIDTH("windowwidth", "Window width"), WINDOW_HEIGHT("windowheight", "Window height"); @@ -384,7 +382,6 @@ void update_statistics() F64Bits layer_bits = gVLManager.getLandBits() + gVLManager.getWindBits() + gVLManager.getCloudBits(); add(LLStatViewer::LAYERS_NETWORK_DATA_RECEIVED, layer_bits); add(LLStatViewer::OBJECT_NETWORK_DATA_RECEIVED, gObjectData); - sample(LLStatViewer::PENDING_VFS_OPERATIONS, LLVFile::getVFSThread()->getPending()); add(LLStatViewer::ASSET_UDP_DATA_RECEIVED, F64Bits(gTransferManager.getTransferBitsIn(LLTCT_ASSET))); gTransferManager.resetTransferBitsIn(LLTCT_ASSET); diff --git a/indra/newview/llviewerstats.h b/indra/newview/llviewerstats.h index 04870e0c26..72ce336664 100644 --- a/indra/newview/llviewerstats.h +++ b/indra/newview/llviewerstats.h @@ -186,7 +186,6 @@ extern LLTrace::SampleStatHandle<> FPS_SAMPLE, VISIBLE_AVATARS, SHADER_OBJECTS, DRAW_DISTANCE, - PENDING_VFS_OPERATIONS, WINDOW_WIDTH, WINDOW_HEIGHT; diff --git a/indra/newview/llviewertexlayer.cpp b/indra/newview/llviewertexlayer.cpp index c501dd0035..4c2fbcf837 100644 --- a/indra/newview/llviewertexlayer.cpp +++ b/indra/newview/llviewertexlayer.cpp @@ -31,8 +31,6 @@ #include "llagent.h" #include "llimagej2c.h" #include "llnotificationsutil.h" -#include "llvfile.h" -#include "llvfs.h" #include "llviewerregion.h" #include "llglslshader.h" #include "llvoavatarself.h" diff --git a/indra/newview/llviewertexture.cpp b/indra/newview/llviewertexture.cpp index 7fbc4d789b..075588d577 100644 --- a/indra/newview/llviewertexture.cpp +++ b/indra/newview/llviewertexture.cpp @@ -39,8 +39,6 @@ #include "llimagej2c.h" #include "llimagetga.h" #include "llstl.h" -#include "llvfile.h" -#include "llvfs.h" #include "message.h" #include "lltimer.h" diff --git a/indra/newview/llviewertexture.h b/indra/newview/llviewertexture.h index 69568cc825..07997e02a5 100644 --- a/indra/newview/llviewertexture.h +++ b/indra/newview/llviewertexture.h @@ -54,7 +54,7 @@ class LLTexturePipelineTester ; typedef void (*loaded_callback_func)( BOOL success, LLViewerFetchedTexture *src_vi, LLImageRaw* src, LLImageRaw* src_aux, S32 discard_level, BOOL final, void* userdata ); -class LLVFile; +class LLFileSystem; class LLMessageSystem; class LLViewerMediaImpl ; class LLVOVolume ; diff --git a/indra/newview/llviewertexturelist.cpp b/indra/newview/llviewertexturelist.cpp index 561319ca5d..38fccba169 100644 --- a/indra/newview/llviewertexturelist.cpp +++ b/indra/newview/llviewertexturelist.cpp @@ -41,9 +41,7 @@ #include "llsdserialize.h" #include "llsys.h" -#include "llvfs.h" -#include "llvfile.h" -#include "llvfsthread.h" +#include "llfilesystem.h" #include "llxmltree.h" #include "message.h" diff --git a/indra/newview/llviewerwearable.cpp b/indra/newview/llviewerwearable.cpp index c80cf27bda..bc21b5bf84 100644 --- a/indra/newview/llviewerwearable.cpp +++ b/indra/newview/llviewerwearable.cpp @@ -107,7 +107,6 @@ LLWearable::EImportResult LLViewerWearable::importStream( std::istream& input_st // Shouldn't really log the asset id for security reasons, but // we need it in this case. LL_WARNS() << "Bad Wearable asset header: " << mAssetID << LL_ENDL; - //gVFS->dumpMap(); return result; } diff --git a/indra/newview/llviewerwindow.cpp b/indra/newview/llviewerwindow.cpp index c20021d4c7..92e8f8026d 100644 --- a/indra/newview/llviewerwindow.cpp +++ b/indra/newview/llviewerwindow.cpp @@ -5170,6 +5170,104 @@ BOOL LLViewerWindow::rawSnapshot(LLImageRaw *raw, S32 image_width, S32 image_hei return ret; } +BOOL LLViewerWindow::simpleSnapshot(LLImageRaw* raw, S32 image_width, S32 image_height, const int num_render_passes) +{ + gDisplaySwapBuffers = FALSE; + + glClear(GL_DEPTH_BUFFER_BIT | GL_COLOR_BUFFER_BIT | GL_STENCIL_BUFFER_BIT); + setCursor(UI_CURSOR_WAIT); + + BOOL prev_draw_ui = gPipeline.hasRenderDebugFeatureMask(LLPipeline::RENDER_DEBUG_FEATURE_UI) ? TRUE : FALSE; + if (prev_draw_ui != false) + { + LLPipeline::toggleRenderDebugFeature(LLPipeline::RENDER_DEBUG_FEATURE_UI); + } + + LLPipeline::sShowHUDAttachments = FALSE; + LLRect window_rect = getWorldViewRectRaw(); + + S32 original_width = LLPipeline::sRenderDeferred ? gPipeline.mDeferredScreen.getWidth() : gViewerWindow->getWorldViewWidthRaw(); + S32 original_height = LLPipeline::sRenderDeferred ? gPipeline.mDeferredScreen.getHeight() : gViewerWindow->getWorldViewHeightRaw(); + + LLRenderTarget scratch_space; + U32 color_fmt = GL_RGBA; + const bool use_depth_buffer = true; + const bool use_stencil_buffer = true; + if (scratch_space.allocate(image_width, image_height, color_fmt, use_depth_buffer, use_stencil_buffer)) + { + if (gPipeline.allocateScreenBuffer(image_width, image_height)) + { + mWorldViewRectRaw.set(0, image_height, image_width, 0); + + scratch_space.bindTarget(); + } + else + { + scratch_space.release(); + gPipeline.allocateScreenBuffer(original_width, original_height); + } + } + + // we render the scene more than once since this helps + // greatly with the objects not being drawn in the + // snapshot when they are drawn in the scene. This is + // evident when you set this value via the debug setting + // called 360CaptureNumRenderPasses to 1. The theory is + // that the missing objects are caused by the sUseOcclusion + // property in pipeline but that the use in pipeline.cpp + // lags by a frame or two so rendering more than once + // appears to help a lot. + for (int i = 0; i < num_render_passes; ++i) + { + // turning this flag off here prohibits the screen swap + // to present the new page to the viewer - this stops + // the black flash in between captures when the number + // of render passes is more than 1. We need to also + // set it here because code in LLViewerDisplay resets + // it to TRUE each time. + gDisplaySwapBuffers = FALSE; + + // actually render the scene + const U32 subfield = 0; + const bool do_rebuild = true; + const F32 zoom = 1.0; + const bool for_snapshot = TRUE; + display(do_rebuild, zoom, subfield, for_snapshot); + } + + glReadPixels( + 0, 0, + image_width, + image_height, + GL_RGB, GL_UNSIGNED_BYTE, + raw->getData() + ); + stop_glerror(); + + gDisplaySwapBuffers = FALSE; + gDepthDirty = TRUE; + + if (!gPipeline.hasRenderDebugFeatureMask(LLPipeline::RENDER_DEBUG_FEATURE_UI)) + { + if (prev_draw_ui != false) + { + LLPipeline::toggleRenderDebugFeature(LLPipeline::RENDER_DEBUG_FEATURE_UI); + } + } + + LLPipeline::sShowHUDAttachments = TRUE; + + setCursor(UI_CURSOR_ARROW); + + gPipeline.resetDrawOrders(); + mWorldViewRectRaw = window_rect; + scratch_space.flush(); + scratch_space.release(); + gPipeline.allocateScreenBuffer(original_width, original_height); + + return true; +} + void LLViewerWindow::destroyWindow() { if (mWindow) diff --git a/indra/newview/llviewerwindow.h b/indra/newview/llviewerwindow.h index 8a6df613dc..713cc51bf7 100644 --- a/indra/newview/llviewerwindow.h +++ b/indra/newview/llviewerwindow.h @@ -357,7 +357,10 @@ public: BOOL saveSnapshot(const std::string& filename, S32 image_width, S32 image_height, BOOL show_ui = TRUE, BOOL show_hud = TRUE, BOOL do_rebuild = FALSE, LLSnapshotModel::ESnapshotLayerType type = LLSnapshotModel::SNAPSHOT_TYPE_COLOR, LLSnapshotModel::ESnapshotFormat format = LLSnapshotModel::SNAPSHOT_FORMAT_BMP); BOOL rawSnapshot(LLImageRaw *raw, S32 image_width, S32 image_height, BOOL keep_window_aspect = TRUE, BOOL is_texture = FALSE, BOOL show_ui = TRUE, BOOL show_hud = TRUE, BOOL do_rebuild = FALSE, LLSnapshotModel::ESnapshotLayerType type = LLSnapshotModel::SNAPSHOT_TYPE_COLOR, S32 max_size = MAX_SNAPSHOT_IMAGE_SIZE); - BOOL thumbnailSnapshot(LLImageRaw *raw, S32 preview_width, S32 preview_height, BOOL show_ui, BOOL show_hud, BOOL do_rebuild, LLSnapshotModel::ESnapshotLayerType type); + + BOOL simpleSnapshot(LLImageRaw *raw, S32 image_width, S32 image_height, const int num_render_passes); + + BOOL thumbnailSnapshot(LLImageRaw *raw, S32 preview_width, S32 preview_height, BOOL show_ui, BOOL show_hud, BOOL do_rebuild, LLSnapshotModel::ESnapshotLayerType type); BOOL isSnapshotLocSet() const; void resetSnapshotLoc() const; diff --git a/indra/newview/llvoavatar.cpp b/indra/newview/llvoavatar.cpp index 0e0ebce949..5d994058c2 100644 --- a/indra/newview/llvoavatar.cpp +++ b/indra/newview/llvoavatar.cpp @@ -1140,7 +1140,6 @@ void LLVOAvatar::initInstance() //------------------------------------------------------------------------- if (LLCharacter::sInstances.size() == 1) { - LLKeyframeMotion::setVFS(gStaticVFS); registerMotion( ANIM_AGENT_DO_NOT_DISTURB, LLNullMotion::create ); registerMotion( ANIM_AGENT_CROUCH, LLKeyframeStandMotion::create ); registerMotion( ANIM_AGENT_CROUCHWALK, LLKeyframeWalkMotion::create ); diff --git a/indra/newview/llvovolume.h b/indra/newview/llvovolume.h index ce400a3498..73eeec813c 100644 --- a/indra/newview/llvovolume.h +++ b/indra/newview/llvovolume.h @@ -218,10 +218,9 @@ public: void updateSculptTexture(); void setIndexInTex(U32 ch, S32 index) { mIndexInTex[ch] = index ;} void sculpt(); - static void rebuildMeshAssetCallback(LLVFS *vfs, - const LLUUID& asset_uuid, - LLAssetType::EType type, - void* user_data, S32 status, LLExtStat ext_status); + static void rebuildMeshAssetCallback(const LLUUID& asset_uuid, + LLAssetType::EType type, + void* user_data, S32 status, LLExtStat ext_status); void updateRelativeXform(bool force_identity = false); /*virtual*/ BOOL updateGeometry(LLDrawable *drawable); diff --git a/indra/newview/skins/default/html/common/equirectangular/default.html b/indra/newview/skins/default/html/common/equirectangular/default.html new file mode 100644 index 0000000000..227b306590 --- /dev/null +++ b/indra/newview/skins/default/html/common/equirectangular/default.html @@ -0,0 +1,22 @@ +<html> +<head> +<style> +body { + background-color:#000; + background-image: linear-gradient(white 2px, transparent 2px), + linear-gradient(90deg, white 2px, transparent 2px), + linear-gradient(rgba(255,255,255,.3) 1px, transparent 1px), + linear-gradient(90deg, rgba(255,255,255,.3) 1px, transparent 1px); + background-size: 100px 100px, 100px 100px, 20px 20px, 20px 20px; + background-position:-2px -2px, -2px -2px, -1px -1px, -1px -1px; +} +</style> +</head> +<body> +<script> +function start() { +} +document.addEventListener('DOMContentLoaded', start); +</script> +</body> +</html>
\ No newline at end of file diff --git a/indra/newview/skins/default/html/common/equirectangular/eqr_gen.html b/indra/newview/skins/default/html/common/equirectangular/eqr_gen.html new file mode 100644 index 0000000000..2675d37727 --- /dev/null +++ b/indra/newview/skins/default/html/common/equirectangular/eqr_gen.html @@ -0,0 +1,150 @@ +<!DOCTYPE html> +<html lang="en"> +<head> + <meta charset="utf-8"> + <meta name="viewport" content="width=device-width, user-scalable=no, minimum-scale=1.0, maximum-scale=1.0"> + <style> + body { + background: #333; + padding: 0; + margin: 0; + overflow: hidden; + } + #error_message { + z-index: 2; + background-color: #aa3333; + overflow: hidden; + display: none; + pointer-events:none; + font-family: monospace; + font-size: 3em; + color: white; + border-radius: 1em; + padding: 1em; + position: absolute; + top: 50%; + left: 50%; + margin-right: -50%; + transform: translate(-50%, -50%) + } + #quality_window { + user-select: none; + z-index: 100; + position: absolute; + left: 8px; + top: 8px; + width: auto; + border-radius: 16px; + height: auto; + font-size: 1.5em; + text-align: center; + font-family: monospace; + background-color: rgba(200,200,200,0.35); + color: #000; + padding-left: 16px; + padding-right: 16px; + padding-top: 8px; + padding-bottom: 8px; + } + </style> +</head> +<body> + <script src="js/three.min.js"></script> + <script src="js/OrbitControls.js"></script> + <script src="js/jpeg_encoder_basic.js" type="text/javascript"></script> + <script src="js/CubemapToEquirectangular.js"></script> + <script> + var controls, camera, scene, renderer, equiManaged; + + function init(eqr_width, eqr_height, img_path, camera_fov, initial_heading, overlay_label) { + + camera = new THREE.PerspectiveCamera(camera_fov, window.innerWidth / window.innerHeight, 0.1, 100); + camera.position.x = 0.01; + + scene = new THREE.Scene(); + + renderer = new THREE.WebGLRenderer(); + renderer.autoClear = false; + renderer.setPixelRatio(window.devicePixelRatio); + renderer.setSize(window.innerWidth, window.innerHeight); + + var cubemap_img_js_url = img_path + '/cubemap_img.js'; + var cubemap_image_js = document.createElement('script'); + cubemap_image_js.setAttribute('type', 'text/javascript'); + cubemap_image_js.setAttribute('src', cubemap_img_js_url); + document.getElementsByTagName('head')[0].appendChild(cubemap_image_js); + cubemap_image_js.onload = function () { + document.getElementById("error_message").style.display = 'none' + scene.background = new THREE.CubeTextureLoader().load(cubemap_img_js); + equiManaged = new CubemapToEquirectangular(renderer, true, eqr_width, eqr_height); + }; + cubemap_image_js.onerror = function () { + document.getElementById("error_message").style.display = 'inline-block' + }; + + document.body.appendChild(renderer.domElement); + window.addEventListener('resize', onWindowResize, false); + + controls = new THREE.OrbitControls(camera, renderer.domElement); + controls.autoRotate = true; + controls.autoRotateSpeed = 0.2; + controls.enableZoom = false; + controls.enablePan = false; + controls.enableDamping = true; + controls.dampingFactor = 0.15; + controls.rotateSpeed = -0.5; + + // initial direction the camera faces + // We cannot edit camera rotation directly as the OrbitControls will + // immediately reset it so we need some math to tell the controls + // there to look at initially. Note there is also an offset of π/2 since + // the Viewer and three.js have slightly different coordinate systems + var spherical_target = new THREE.Spherical(1, Math.PI / 2, initial_heading + Math.PI / 2) + var target = new THREE.Vector3().setFromSpherical(spherical_target) + camera.position.set(target.x, target.y, target.z); + controls.update(); + controls.saveState(); + + // update the text that gets passed in from the C++ app for + // the translucent overlay label that tells us what we are seeing + document.getElementById('quality_window').innerHTML = overlay_label; + + animate(); + } + + window.addEventListener( + 'mousedown', + function (event) { + controls.autoRotate = false; + }, + false + ); + + window.addEventListener( + 'dblclick', + function (event) { + controls.autoRotate = true; + }, + false + ); + + function saveAsEqrImage(filename, xmp_details) { + equiManaged.update(camera, scene, filename, xmp_details); + } + + function onWindowResize() { + camera.aspect = window.innerWidth / window.innerHeight; + camera.updateProjectionMatrix(); + renderer.setSize(window.innerWidth, window.innerHeight); + } + + function animate() { + requestAnimationFrame(animate); + controls.update(); + renderer.render(scene, camera); + } + </script> + <div id="error_message">UNABLE TO LOAD EQR IMAGE</div> + <div id="quality_window">Preview Quality</div> +</body> +</html>
\ No newline at end of file diff --git a/indra/newview/skins/default/textures/textures.xml b/indra/newview/skins/default/textures/textures.xml index 03878d9fe7..a36b859b6c 100644 --- a/indra/newview/skins/default/textures/textures.xml +++ b/indra/newview/skins/default/textures/textures.xml @@ -131,7 +131,8 @@ with the same filename but different name <texture name="Check_Mark" file_name="icons/check_mark.png" preload="true" /> <texture name="Checker" file_name="checker.png" preload="false" /> - + + <texture name="Command_360_Capture_Icon" file_name="toolbar_icons/360_capture.png" preload="true" /> <texture name="Command_AboutLand_Icon" file_name="toolbar_icons/land.png" preload="true" /> <texture name="Command_Appearance_Icon" file_name="toolbar_icons/appearance.png" preload="true" /> <texture name="Command_Avatar_Icon" file_name="toolbar_icons/avatars.png" preload="true" /> diff --git a/indra/newview/skins/default/textures/toolbar_icons/360_capture.png b/indra/newview/skins/default/textures/toolbar_icons/360_capture.png Binary files differnew file mode 100644 index 0000000000..163cebe29f --- /dev/null +++ b/indra/newview/skins/default/textures/toolbar_icons/360_capture.png diff --git a/indra/newview/skins/default/xui/da/floater_stats.xml b/indra/newview/skins/default/xui/da/floater_stats.xml index fe3fa9626e..d07f9e48ca 100644 --- a/indra/newview/skins/default/xui/da/floater_stats.xml +++ b/indra/newview/skins/default/xui/da/floater_stats.xml @@ -32,7 +32,6 @@ <stat_bar label="Layers" name="layerskbitstat"/> <stat_bar label="Actual In" name="actualinkbitstat"/> <stat_bar label="Actual Out" name="actualoutkbitstat"/> - <stat_bar label="VFS Pending Ops" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simulator" name="sim"> diff --git a/indra/newview/skins/default/xui/da/strings.xml b/indra/newview/skins/default/xui/da/strings.xml index ec6ba4800d..814305c1bc 100644 --- a/indra/newview/skins/default/xui/da/strings.xml +++ b/indra/newview/skins/default/xui/da/strings.xml @@ -22,9 +22,6 @@ <string name="StartupInitializingTextureCache"> Initialiserer tekstur cache... </string> - <string name="StartupInitializingVFS"> - Initialiserer VFS... - </string> <string name="ProgressRestoring"> Gendanner... </string> diff --git a/indra/newview/skins/default/xui/de/floater_scene_load_stats.xml b/indra/newview/skins/default/xui/de/floater_scene_load_stats.xml index dff462a594..a3749f1cfa 100644 --- a/indra/newview/skins/default/xui/de/floater_scene_load_stats.xml +++ b/indra/newview/skins/default/xui/de/floater_scene_load_stats.xml @@ -29,7 +29,6 @@ <stat_bar label="Ebenen" name="layersdatareceived"/> <stat_bar label="Tatsächlicher Eingang" name="messagedatain"/> <stat_bar label="Tatsächlicher Ausgang" name="messagedataout"/> - <stat_bar label="Ausstehende Vorgänge im VFS" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simulator" name="sim"> diff --git a/indra/newview/skins/default/xui/de/floater_stats.xml b/indra/newview/skins/default/xui/de/floater_stats.xml index 4e6f56cd94..1838c2081a 100644 --- a/indra/newview/skins/default/xui/de/floater_stats.xml +++ b/indra/newview/skins/default/xui/de/floater_stats.xml @@ -56,7 +56,6 @@ <stat_bar label="Ebenen" name="layersdatareceived"/> <stat_bar label="Tatsächlicher Eingang" name="messagedatain"/> <stat_bar label="Tatsächlicher Ausgang" name="messagedataout"/> - <stat_bar label="Ausstehende Vorgänge im VFS" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simulator" name="sim"> diff --git a/indra/newview/skins/default/xui/de/strings.xml b/indra/newview/skins/default/xui/de/strings.xml index 43327c132d..f021e03dc7 100644 --- a/indra/newview/skins/default/xui/de/strings.xml +++ b/indra/newview/skins/default/xui/de/strings.xml @@ -31,9 +31,6 @@ <string name="StartupInitializingTextureCache"> Textur-Cache wird initialisiert... </string> - <string name="StartupInitializingVFS"> - VFS wird initialisiert... - </string> <string name="StartupRequireDriverUpdate"> Grafikinitialisierung fehlgeschlagen. Bitte aktualisieren Sie Ihren Grafiktreiber. </string> @@ -73,7 +70,6 @@ LOD-Faktor: [LOD_FACTOR] Darstellungsqualität: [RENDER_QUALITY] Erweitertes Beleuchtungsmodell: [GPU_SHADERS] Texturspeicher: [TEXTURE_MEMORY] MB -Erstellungszeit VFS (Cache): [VFS_TIME] </string> <string name="AboutOSXHiDPI"> HiDPI-Anzeigemodus: [HIDPI] diff --git a/indra/newview/skins/default/xui/en/floater_360capture.xml b/indra/newview/skins/default/xui/en/floater_360capture.xml new file mode 100644 index 0000000000..c89489d145 --- /dev/null +++ b/indra/newview/skins/default/xui/en/floater_360capture.xml @@ -0,0 +1,135 @@ +<?xml version="1.0" encoding="UTF-8"?> +<floater can_resize="true" + height="400" + layout="topleft" + min_height="300" + min_width="400" + name="360capture" + help_topic="360capture" + save_rect="true" + title="360 SNAPSHOT" + width="800"> + <panel layout="topleft" + background_visible="true" + top="0" + follows="left|bottom|top" + left="0" + width="200" + bg_opaque_color="0.195 0.195 0.195 1" + background_opaque="true" + height="400" + name="ui_panel_left"> + <text + follows="top|left|right" + height="16" + layout="topleft" + left="10" + top="10" + width="100"> + Quality level + </text> + <radio_group + control_name="360QualitySelection" + follows="left|top" + height="94" + layout="topleft" + left_delta="20" + name="360_quality_selection" + top_pad="0" + width="180"> + <radio_item + height="20" + label="Preview (fast)" + layout="topleft" + left="0" + name="preview_quality" + value="128" + tool_tip="Preview quality" + top="0" + width="100" /> + <radio_item + height="20" + label="Medium" + layout="topleft" + left_delta="0" + name="medium_quality" + value="512" + tool_tip="Medium quality" + top_delta="20" + width="100" /> + <radio_item + height="20" + label="High" + layout="topleft" + left_delta="0" + name="high_quality" + value="1024" + tool_tip="High quality" + top_delta="20" + width="100" /> + <radio_item + height="20" + label="Maximum" + layout="topleft" + left_delta="0" + name="maximum_quality" + value="2048" + tool_tip="Maximum quality" + top_delta="20" + width="100" /> + </radio_group> + <check_box control_name="360CaptureHideAvatars" + follows="left|top" + height="15" + label="Hide all avatars" + layout="left" + left="10" + name="360_hide_avatar" + top_delta="0" + width="100"/> + <button follows="left|top" + height="20" + label="Create 360 image" + layout="topleft" + left="10" + name="capture_button" + top_delta="32" + width="180" /> + <button follows="left|top" + height="20" + label="Save as..." + layout="topleft" + left="10" + name="save_local_button" + top_delta="35" + width="180" /> + </panel> + <panel layout="topleft" + background_visible="true" + top="0" + follows="all" + left="200" + width="600" + bg_opaque_color="0.195 0.195 0.195 1" + background_opaque="true" + height="400" + name="ui_panel_right"> + <web_browser top="10" + follows="all" + bg_opaque_color="0.225 0.225 0.225 1" + left="0" + width="590" + height="368" + name="360capture_contents" + trusted_content="true" /> + <text follows="bottom" + layout="topleft" + name="statusbar" + height="17" + left="0" + top="382" + width="590"> + Click and drag on the image to pan + </text> + </panel> +</floater>
\ No newline at end of file diff --git a/indra/newview/skins/default/xui/en/floater_preferences.xml b/indra/newview/skins/default/xui/en/floater_preferences.xml index ee730dcb01..c4adf0409d 100644 --- a/indra/newview/skins/default/xui/en/floater_preferences.xml +++ b/indra/newview/skins/default/xui/en/floater_preferences.xml @@ -11,12 +11,6 @@ single_instance="true" title="PREFERENCES" width="658"> - <floater.string - name="email_unverified_tooltip"> - Please verify your email to enable IM to Email by visiting -https://accounts.secondlife.com/change_email/ - </floater.string> - <button follows="right|bottom" height="23" diff --git a/indra/newview/skins/default/xui/en/floater_scene_load_stats.xml b/indra/newview/skins/default/xui/en/floater_scene_load_stats.xml index 62cce3a1e3..35d4385487 100644 --- a/indra/newview/skins/default/xui/en/floater_scene_load_stats.xml +++ b/indra/newview/skins/default/xui/en/floater_scene_load_stats.xml @@ -207,12 +207,6 @@ tick_spacing="128.f" precision="1" show_bar="false"/> - <stat_bar name="vfspendingoperations" - label="VFS Pending Operations" - orientation="horizontal" - stat="vfspendingoperations" - unit_label=" Ops." - show_bar="false"/> </stat_view> </stat_view> <!--Sim Stats--> diff --git a/indra/newview/skins/default/xui/en/floater_snapshot.xml b/indra/newview/skins/default/xui/en/floater_snapshot.xml index 832c2ee7da..f441e3cbd7 100644 --- a/indra/newview/skins/default/xui/en/floater_snapshot.xml +++ b/indra/newview/skins/default/xui/en/floater_snapshot.xml @@ -400,7 +400,7 @@ layout="topleft" name="img_info_border" top_pad="0" - right="-10" + right="-130" follows="left|top|right" left_delta="0"/> <text @@ -411,11 +411,10 @@ height="14" layout="topleft" left="220" - right="-20" halign="left" name="image_res_text" top_delta="5" - width="200"> + width="250"> [WIDTH]px (width) x [HEIGHT]px (height) </text> <text @@ -423,7 +422,7 @@ font="SansSerifSmall" height="14" layout="topleft" - left="-65" + left="-185" length="1" halign="right" name="file_size_label" @@ -432,4 +431,19 @@ width="50"> [SIZE] KB </text> + <text + follows="right|top" + font="SansSerifSmall" + height="14" + layout="topleft" + left="-130" + length="1" + halign="right" + name="360_label" + text_color="0.3 0.82 1 1" + top_delta="0" + type="string" + width="115"> + Take a 360 snapshot + </text> </floater> diff --git a/indra/newview/skins/default/xui/en/floater_stats.xml b/indra/newview/skins/default/xui/en/floater_stats.xml index e4f735740b..f9d44b2c69 100644 --- a/indra/newview/skins/default/xui/en/floater_stats.xml +++ b/indra/newview/skins/default/xui/en/floater_stats.xml @@ -198,10 +198,6 @@ stat="messagedataout" decimal_digits="1" show_history="false"/> - <stat_bar name="vfspendingoperations" - label="VFS Pending Operations" - stat="vfspendingoperations" - unit_label="Ops."/> </stat_view> </stat_view> diff --git a/indra/newview/skins/default/xui/en/floater_toybox.xml b/indra/newview/skins/default/xui/en/floater_toybox.xml index bc19d6e79f..bdc04a8a78 100644 --- a/indra/newview/skins/default/xui/en/floater_toybox.xml +++ b/indra/newview/skins/default/xui/en/floater_toybox.xml @@ -4,7 +4,7 @@ can_dock="false" can_minimize="false" can_resize="false" - height="375" + height="430" help_topic="toybox" layout="topleft" legacy_header_height="18" @@ -45,7 +45,7 @@ Buttons will appear as shown or as icon-only depending on each toolbar's settings. </text> <toolbar - bottom="310" + bottom="365" button_display_mode="icons_with_text" follows="all" left="20" @@ -81,11 +81,11 @@ <panel bevel_style="none" border="true" - bottom="311" + bottom="366" follows="left|bottom|right" left="20" right="-20" - top="311" /> + top="366" /> <button follows="left|bottom|right" height="23" @@ -94,7 +94,7 @@ layout="topleft" left="185" name="btn_clear_all" - top="330" + top="385" width="130"> <button.commit_callback function="Toybox.ClearAll" /> </button> @@ -106,7 +106,7 @@ layout="topleft" left="335" name="btn_restore_defaults" - top="330" + top="385" width="130"> <button.commit_callback function="Toybox.RestoreDefaults" /> </button> diff --git a/indra/newview/skins/default/xui/en/menu_viewer.xml b/indra/newview/skins/default/xui/en/menu_viewer.xml index 72cce2208f..24d06722b9 100644 --- a/indra/newview/skins/default/xui/en/menu_viewer.xml +++ b/indra/newview/skins/default/xui/en/menu_viewer.xml @@ -733,6 +733,15 @@ function="Floater.Show" parameter="snapshot" /> </menu_item_call> + +<menu_item_call + label="360 snapshot" + name="Capture 360" + shortcut="control|alt|shift|s"> + <menu_item_call.on_click + function="Floater.Show" + parameter="360capture" /> + </menu_item_call> <menu_item_separator/> <menu_item_call label="Place profile" @@ -3427,6 +3436,14 @@ function="World.EnvPreset" <menu_item_call.on_click function="Advanced.DumpRegionObjectCache" /> </menu_item_call> + +<menu_item_call + label="Interest List: Full Update" + name="Interest List: Full Update" + shortcut="alt|shift|I"> + <menu_item_call.on_click + function="Advanced.InterestListFullUpdate" /> + </menu_item_call> </menu> <menu create_jump_keys="true" diff --git a/indra/newview/skins/default/xui/en/panel_preferences_chat.xml b/indra/newview/skins/default/xui/en/panel_preferences_chat.xml index c023cb036e..35bd736d77 100644 --- a/indra/newview/skins/default/xui/en/panel_preferences_chat.xml +++ b/indra/newview/skins/default/xui/en/panel_preferences_chat.xml @@ -44,16 +44,6 @@ <check_box enabled="false" height="16" - label="Email me IMs when I'm offline" - layout="topleft" - name="send_im_to_email" - top_pad="6" - width="330"> - </check_box> - - <check_box - enabled="false" - height="16" label="Only friends and groups can call or IM me" layout="topleft" name="voice_call_friends_only_check" @@ -62,6 +52,20 @@ </check_box> <text + font="SansSerifSmall" + height="16" + layout="topleft" + length="1" + name="email_settings" + skip_link_underline="true" + top_pad="6" + left_delta="2" + type="string" + width="350"> + [https://accounts.secondlife.com/change_email Email me IMs when I'm offline] + </text> + + <text layout="topleft" left="345" height="12" diff --git a/indra/newview/skins/default/xui/en/strings.xml b/indra/newview/skins/default/xui/en/strings.xml index d115e09d5b..f26ee06e6b 100644 --- a/indra/newview/skins/default/xui/en/strings.xml +++ b/indra/newview/skins/default/xui/en/strings.xml @@ -17,7 +17,6 @@ <string name="StartupLoading">Loading [APP_NAME]...</string> <string name="StartupClearingCache">Clearing cache...</string> <string name="StartupInitializingTextureCache">Initializing texture cache...</string> - <string name="StartupInitializingVFS">Initializing VFS...</string> <string name="StartupRequireDriverUpdate">Graphics initialization failed. Please update your graphics driver!</string> <!-- about dialog/support string--> @@ -56,9 +55,9 @@ LOD factor: [LOD_FACTOR] Render quality: [RENDER_QUALITY] Advanced Lighting Model: [GPU_SHADERS] Texture memory: [TEXTURE_MEMORY]MB -VFS (cache) creation time: [VFS_TIME] +Disk cache: [DISK_CACHE_INFO] </string> - <string name="AboutOSXHiDPI"> + <string name="AboutOSXHiDPI"> HiDPI display mode: [HIDPI] </string> <string name="AboutLibs"> @@ -4124,6 +4123,8 @@ Try enclosing path to the editor with double quotes. <!-- commands --> + <string +name="Command_360_Capture_Label">360 snapshot</string> <string name="Command_AboutLand_Label">About land</string> <string name="Command_Appearance_Label">Outfits</string> <string name="Command_Avatar_Label">Complete avatars</string> @@ -4154,6 +4155,8 @@ Try enclosing path to the editor with double quotes. <string name="Command_View_Label">Camera controls</string> <string name="Command_Voice_Label">Voice settings</string> + <string +name="Command_360_Capture_Tooltip">Capture a 360 equirectangular image</string> <string name="Command_AboutLand_Tooltip">Information about the land you're visiting</string> <string name="Command_Appearance_Tooltip">Change your avatar</string> <string name="Command_Avatar_Tooltip">Choose a complete avatar</string> diff --git a/indra/newview/skins/default/xui/es/floater_scene_load_stats.xml b/indra/newview/skins/default/xui/es/floater_scene_load_stats.xml index f625d5257c..cfc5e524b5 100644 --- a/indra/newview/skins/default/xui/es/floater_scene_load_stats.xml +++ b/indra/newview/skins/default/xui/es/floater_scene_load_stats.xml @@ -29,7 +29,6 @@ <stat_bar label="Capas" name="layersdatareceived"/> <stat_bar label="Entrando ahora" name="messagedatain"/> <stat_bar label="Saliendo ahora" name="messagedataout"/> - <stat_bar label="Operaciones VFS pendientes" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simulador" name="sim"> diff --git a/indra/newview/skins/default/xui/es/floater_stats.xml b/indra/newview/skins/default/xui/es/floater_stats.xml index d1c5e867db..0aec786f25 100644 --- a/indra/newview/skins/default/xui/es/floater_stats.xml +++ b/indra/newview/skins/default/xui/es/floater_stats.xml @@ -56,7 +56,6 @@ <stat_bar label="Capas" name="layersdatareceived"/> <stat_bar label="Entrando ahora" name="messagedatain"/> <stat_bar label="Saliendo ahora" name="messagedataout"/> - <stat_bar label="Operaciones VFS pendientes" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simulador" name="sim"> diff --git a/indra/newview/skins/default/xui/es/strings.xml b/indra/newview/skins/default/xui/es/strings.xml index f5e7d0bf4e..ebb4ceaa7e 100644 --- a/indra/newview/skins/default/xui/es/strings.xml +++ b/indra/newview/skins/default/xui/es/strings.xml @@ -22,9 +22,6 @@ <string name="StartupInitializingTextureCache"> Iniciando la caché de las texturas... </string> - <string name="StartupInitializingVFS"> - Iniciando VFS... - </string> <string name="StartupRequireDriverUpdate"> Error de inicialización de gráficos. Actualiza tu controlador de gráficos. </string> @@ -65,7 +62,6 @@ Factor LOD: [LOD_FACTOR] Calidad de renderización: [RENDER_QUALITY] Modelo de iluminación avanzado: [GPU_SHADERS] Memoria de textura: [TEXTURE_MEMORY]MB -VFS (cache) hora de creación: [VFS_TIME] </string> <string name="AboutOSXHiDPI"> Modo de visualización HiDPi: [HIDPI] diff --git a/indra/newview/skins/default/xui/fr/floater_scene_load_stats.xml b/indra/newview/skins/default/xui/fr/floater_scene_load_stats.xml index 62830054bf..3889b13f0c 100644 --- a/indra/newview/skins/default/xui/fr/floater_scene_load_stats.xml +++ b/indra/newview/skins/default/xui/fr/floater_scene_load_stats.xml @@ -29,7 +29,6 @@ <stat_bar label="Couches" name="layersdatareceived"/> <stat_bar label="Arrivés" name="messagedatain"/> <stat_bar label="Sortis" name="messagedataout"/> - <stat_bar label="Opérations VFS en attente" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simulateur" name="sim"> diff --git a/indra/newview/skins/default/xui/fr/floater_stats.xml b/indra/newview/skins/default/xui/fr/floater_stats.xml index fae17e3608..d0f7f42939 100644 --- a/indra/newview/skins/default/xui/fr/floater_stats.xml +++ b/indra/newview/skins/default/xui/fr/floater_stats.xml @@ -56,7 +56,6 @@ <stat_bar label="Couches" name="layersdatareceived"/> <stat_bar label="Arrivés" name="messagedatain"/> <stat_bar label="Sortis" name="messagedataout"/> - <stat_bar label="Opérations VFS en attente" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simulateur" name="sim"> diff --git a/indra/newview/skins/default/xui/fr/strings.xml b/indra/newview/skins/default/xui/fr/strings.xml index f26eac545a..9fde703d6c 100644 --- a/indra/newview/skins/default/xui/fr/strings.xml +++ b/indra/newview/skins/default/xui/fr/strings.xml @@ -31,9 +31,6 @@ <string name="StartupInitializingTextureCache"> Initialisation du cache des textures... </string> - <string name="StartupInitializingVFS"> - Initialisation VFS... - </string> <string name="StartupRequireDriverUpdate"> Échec d'initialisation des graphiques. Veuillez mettre votre pilote graphique à jour. </string> @@ -74,7 +71,6 @@ Facteur LOD (niveau de détail) : [LOD_FACTOR] Qualité de rendu : [RENDER_QUALITY] Modèle d’éclairage avancé : [GPU_SHADERS] Mémoire textures : [TEXTURE_MEMORY] Mo -Heure de création VFS (cache) : [VFS_TIME] </string> <string name="AboutOSXHiDPI"> Mode d'affichage HiDPI : [HIDPI] diff --git a/indra/newview/skins/default/xui/it/floater_scene_load_stats.xml b/indra/newview/skins/default/xui/it/floater_scene_load_stats.xml index ca18812eb7..efceb05298 100644 --- a/indra/newview/skins/default/xui/it/floater_scene_load_stats.xml +++ b/indra/newview/skins/default/xui/it/floater_scene_load_stats.xml @@ -29,7 +29,6 @@ <stat_bar label="Livelli" name="layersdatareceived"/> <stat_bar label="Effettivi in ingresso" name="messagedatain"/> <stat_bar label="Effettivi in uscita" name="messagedataout"/> - <stat_bar label="Operazioni VFS in sospeso" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simulatore" name="sim"> diff --git a/indra/newview/skins/default/xui/it/floater_stats.xml b/indra/newview/skins/default/xui/it/floater_stats.xml index 7ef13aa37f..6434c3b66b 100644 --- a/indra/newview/skins/default/xui/it/floater_stats.xml +++ b/indra/newview/skins/default/xui/it/floater_stats.xml @@ -56,7 +56,6 @@ <stat_bar label="Livelli" name="layersdatareceived"/> <stat_bar label="Effettivi in ingresso" name="messagedatain"/> <stat_bar label="Effettivi in uscita" name="messagedataout"/> - <stat_bar label="Operazioni VFS in sospeso" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simulatore" name="sim"> diff --git a/indra/newview/skins/default/xui/it/strings.xml b/indra/newview/skins/default/xui/it/strings.xml index f0466cea81..3049828f46 100644 --- a/indra/newview/skins/default/xui/it/strings.xml +++ b/indra/newview/skins/default/xui/it/strings.xml @@ -28,9 +28,6 @@ <string name="StartupInitializingTextureCache"> Inizializzazione della cache texture... </string> - <string name="StartupInitializingVFS"> - Inizializzazione VFS... - </string> <string name="StartupRequireDriverUpdate"> Inizializzazione grafica non riuscita. Aggiorna il driver della scheda grafica! </string> @@ -71,7 +68,6 @@ Fattore livello di dettaglio: [LOD_FACTOR] Qualità di rendering: [RENDER_QUALITY] Modello illuminazione avanzato: [GPU_SHADERS] Memoria texture: [TEXTURE_MEMORY]MB -Data/ora creazione VFS (cache): [VFS_TIME] </string> <string name="AboutOSXHiDPI"> Modalità display HiDPI: [HIDPI] diff --git a/indra/newview/skins/default/xui/ja/floater_scene_load_stats.xml b/indra/newview/skins/default/xui/ja/floater_scene_load_stats.xml index f6edce026f..f348ce3c4d 100644 --- a/indra/newview/skins/default/xui/ja/floater_scene_load_stats.xml +++ b/indra/newview/skins/default/xui/ja/floater_scene_load_stats.xml @@ -29,7 +29,6 @@ <stat_bar label="レイヤー" name="layersdatareceived"/> <stat_bar label="実際の受信" name="messagedatain"/> <stat_bar label="実際の送信" name="messagedataout"/> - <stat_bar label="VFS 保留中の操作" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="シミュレーター" name="sim"> diff --git a/indra/newview/skins/default/xui/ja/floater_stats.xml b/indra/newview/skins/default/xui/ja/floater_stats.xml index 3bc343639b..1da0e5ebc9 100644 --- a/indra/newview/skins/default/xui/ja/floater_stats.xml +++ b/indra/newview/skins/default/xui/ja/floater_stats.xml @@ -56,7 +56,6 @@ <stat_bar label="レイヤー" name="layersdatareceived"/> <stat_bar label="実際の受信" name="messagedatain"/> <stat_bar label="実際の送信" name="messagedataout"/> - <stat_bar label="VFS 保留中の操作" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="シミュレーター" name="sim"> diff --git a/indra/newview/skins/default/xui/ja/strings.xml b/indra/newview/skins/default/xui/ja/strings.xml index 52d6fb0c2b..dcd6e65d34 100644 --- a/indra/newview/skins/default/xui/ja/strings.xml +++ b/indra/newview/skins/default/xui/ja/strings.xml @@ -31,9 +31,6 @@ <string name="StartupInitializingTextureCache"> テクスチャキャッシュを初期化中です... </string> - <string name="StartupInitializingVFS"> - VFS を初期化中です... - </string> <string name="StartupRequireDriverUpdate"> グラフィックを初期化できませんでした。グラフィックドライバを更新してください。 </string> @@ -74,7 +71,6 @@ LOD 係数: [LOD_FACTOR] 描画の質: [RENDER_QUALITY] 高度なライティングモデル: [GPU_SHADERS] テクスチャメモリ: [TEXTURE_MEMORY]MB -VFS（キャッシュ）作成時間: [VFS_TIME] </string> <string name="AboutOSXHiDPI"> HiDPI 表示モード: [HIDPI] diff --git a/indra/newview/skins/default/xui/pl/floater_scene_load_stats.xml b/indra/newview/skins/default/xui/pl/floater_scene_load_stats.xml index 6fdc7e19f6..8f5d0c5c70 100644 --- a/indra/newview/skins/default/xui/pl/floater_scene_load_stats.xml +++ b/indra/newview/skins/default/xui/pl/floater_scene_load_stats.xml @@ -29,7 +29,6 @@ <stat_bar name="layersdatareceived" label="Warstwy" /> <stat_bar name="messagedatain" label="Aktualna il. wchodząca" /> <stat_bar name="messagedataout" label="Aktualna il. wychodząca" /> - <stat_bar name="vfspendingoperations" label="Operacje oczekujące VFS" unit_label=" op." /> </stat_view> </stat_view> <stat_view name="sim" label="Symulator"> diff --git a/indra/newview/skins/default/xui/pl/floater_stats.xml b/indra/newview/skins/default/xui/pl/floater_stats.xml index 5dd7d19bab..21e37717c2 100644 --- a/indra/newview/skins/default/xui/pl/floater_stats.xml +++ b/indra/newview/skins/default/xui/pl/floater_stats.xml @@ -55,7 +55,6 @@ <stat_bar label="Warstwy" name="layersdatareceived" /> <stat_bar label="Aktualna il. wchodząca" name="messagedatain" /> <stat_bar label="Aktualna il. wychodząca" name="messagedataout" /> - <stat_bar label="Operacje oczekujące VFS" name="vfspendingoperations" /> </stat_view> </stat_view> <stat_view label="Symulator" name="sim"> diff --git a/indra/newview/skins/default/xui/pl/strings.xml b/indra/newview/skins/default/xui/pl/strings.xml index 91fea234d2..cf033df3c9 100644 --- a/indra/newview/skins/default/xui/pl/strings.xml +++ b/indra/newview/skins/default/xui/pl/strings.xml @@ -15,9 +15,6 @@ <string name="StartupInitializingTextureCache"> Inicjowanie bufora danych tekstur... </string> - <string name="StartupInitializingVFS"> - Inicjowanie wirtualnego systemu plików... - </string> <string name="StartupRequireDriverUpdate"> Nie można zainicjować grafiki. Zaktualizuj sterowniki! </string> diff --git a/indra/newview/skins/default/xui/pt/floater_scene_load_stats.xml b/indra/newview/skins/default/xui/pt/floater_scene_load_stats.xml index 027e1ef311..dbaab1d782 100644 --- a/indra/newview/skins/default/xui/pt/floater_scene_load_stats.xml +++ b/indra/newview/skins/default/xui/pt/floater_scene_load_stats.xml @@ -29,7 +29,6 @@ <stat_bar label="Layers" name="layersdatareceived"/> <stat_bar label="Actual In" name="messagedatain"/> <stat_bar label="Actual Out" name="messagedataout"/> - <stat_bar label="Operações pendentes do VFS" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simulator" name="sim"> diff --git a/indra/newview/skins/default/xui/pt/floater_stats.xml b/indra/newview/skins/default/xui/pt/floater_stats.xml index f41fe17778..3253984268 100644 --- a/indra/newview/skins/default/xui/pt/floater_stats.xml +++ b/indra/newview/skins/default/xui/pt/floater_stats.xml @@ -56,7 +56,6 @@ <stat_bar label="Layers" name="layersdatareceived"/> <stat_bar label="Actual In" name="messagedatain"/> <stat_bar label="Actual Out" name="messagedataout"/> - <stat_bar label="Operações pendentes do VFS" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simulator" name="sim"> diff --git a/indra/newview/skins/default/xui/pt/strings.xml b/indra/newview/skins/default/xui/pt/strings.xml index ee982b5b22..c72a41fd3a 100644 --- a/indra/newview/skins/default/xui/pt/strings.xml +++ b/indra/newview/skins/default/xui/pt/strings.xml @@ -22,9 +22,6 @@ <string name="StartupInitializingTextureCache"> Iniciando cache de texturas... </string> - <string name="StartupInitializingVFS"> - Iniciando VFS... - </string> <string name="StartupRequireDriverUpdate"> Falha na inicialização dos gráficos. Atualize seu driver gráfico! </string> @@ -65,7 +62,6 @@ LOD fator: [LOD_FACTOR] Qualidade de renderização: [RENDER_QUALITY] Modelo avançado de luzes: [GPU_SHADERS] Memória de textura: [TEXTURE_MEMORY]MB -VFS (cache) tempo de criação: [VFS_TIME] </string> <string name="AboutOSXHiDPI"> HiDPI modo de exibição: [HIDPI] diff --git a/indra/newview/skins/default/xui/ru/floater_scene_load_stats.xml b/indra/newview/skins/default/xui/ru/floater_scene_load_stats.xml index a101e62627..c4f432023c 100644 --- a/indra/newview/skins/default/xui/ru/floater_scene_load_stats.xml +++ b/indra/newview/skins/default/xui/ru/floater_scene_load_stats.xml @@ -29,7 +29,6 @@ <stat_bar label="Слои" name="layersdatareceived"/> <stat_bar label="Действительный ввод" name="messagedatain"/> <stat_bar label="Действительный вывод" name="messagedataout"/> - <stat_bar label="Ожидающие операции VFS" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Симулятор" name="sim"> diff --git a/indra/newview/skins/default/xui/ru/floater_stats.xml b/indra/newview/skins/default/xui/ru/floater_stats.xml index 10e9f5a7f4..a7d26029c2 100644 --- a/indra/newview/skins/default/xui/ru/floater_stats.xml +++ b/indra/newview/skins/default/xui/ru/floater_stats.xml @@ -56,7 +56,6 @@ <stat_bar label="Слои" name="layersdatareceived"/> <stat_bar label="Действительный ввод" name="messagedatain"/> <stat_bar label="Действительный вывод" name="messagedataout"/> - <stat_bar label="Ожидающие операции VFS" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Симулятор" name="sim"> diff --git a/indra/newview/skins/default/xui/ru/strings.xml b/indra/newview/skins/default/xui/ru/strings.xml index e9592a0476..43a87b2b18 100644 --- a/indra/newview/skins/default/xui/ru/strings.xml +++ b/indra/newview/skins/default/xui/ru/strings.xml @@ -31,9 +31,6 @@ <string name="StartupInitializingTextureCache"> Инициализация кэша текстур... </string> - <string name="StartupInitializingVFS"> - Инициализация виртуальной файловой системы... - </string> <string name="StartupRequireDriverUpdate"> Ошибка инициализации графики. Обновите графический драйвер! </string> @@ -74,7 +71,6 @@ SLURL: <nolink>[SLURL]</nolink> Качество визуализации: [RENDER_QUALITY] Расширенная модель освещения: [GPU_SHADERS] Память текстур: [TEXTURE_MEMORY] МБ -Время создания VFS (кэш): [VFS_TIME] </string> <string name="AboutOSXHiDPI"> Режим отображения HiDPI: [HIDPI] diff --git a/indra/newview/skins/default/xui/tr/floater_scene_load_stats.xml b/indra/newview/skins/default/xui/tr/floater_scene_load_stats.xml index ae0a94595d..7d5f4adb02 100644 --- a/indra/newview/skins/default/xui/tr/floater_scene_load_stats.xml +++ b/indra/newview/skins/default/xui/tr/floater_scene_load_stats.xml @@ -29,7 +29,6 @@ <stat_bar label="Katmanlar" name="layersdatareceived"/> <stat_bar label="Gerçekte Gelen" name="messagedatain"/> <stat_bar label="Gerçekte Giden" name="messagedataout"/> - <stat_bar label="VFS Bekleyen İşlemler" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simülatör" name="sim"> diff --git a/indra/newview/skins/default/xui/tr/floater_stats.xml b/indra/newview/skins/default/xui/tr/floater_stats.xml index 1ae42ad382..bd36d4916f 100644 --- a/indra/newview/skins/default/xui/tr/floater_stats.xml +++ b/indra/newview/skins/default/xui/tr/floater_stats.xml @@ -56,7 +56,6 @@ <stat_bar label="Katmanlar" name="layersdatareceived"/> <stat_bar label="Gerçekte Gelen" name="messagedatain"/> <stat_bar label="Gerçekte Giden" name="messagedataout"/> - <stat_bar label="VFS Bekleyen İşlemler" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="Simülatör" name="sim"> diff --git a/indra/newview/skins/default/xui/tr/strings.xml b/indra/newview/skins/default/xui/tr/strings.xml index 56fad978f5..982de76a5b 100644 --- a/indra/newview/skins/default/xui/tr/strings.xml +++ b/indra/newview/skins/default/xui/tr/strings.xml @@ -31,9 +31,6 @@ <string name="StartupInitializingTextureCache"> Doku önbelleği başlatılıyor... </string> - <string name="StartupInitializingVFS"> - VFS Başlatılıyor... - </string> <string name="StartupRequireDriverUpdate"> Grafik başlatma başarılamadı. Lütfen grafik sürücünüzü güncelleştirin! </string> @@ -74,7 +71,6 @@ LOD faktörü: [LOD_FACTOR] İşleme kalitesi: [RENDER_QUALITY] Gelişmiş Aydınlatma Modeli: [GPU_SHADERS] Doku belleği: [TEXTURE_MEMORY]MB -VFS (önbellek) oluşturma saati: [VFS_TIME] </string> <string name="AboutOSXHiDPI"> HiDPI görüntü modu: [HIDPI] diff --git a/indra/newview/skins/default/xui/zh/floater_scene_load_stats.xml b/indra/newview/skins/default/xui/zh/floater_scene_load_stats.xml index 1a5c20abeb..20344e299f 100644 --- a/indra/newview/skins/default/xui/zh/floater_scene_load_stats.xml +++ b/indra/newview/skins/default/xui/zh/floater_scene_load_stats.xml @@ -29,7 +29,6 @@ <stat_bar label="層次" name="layersdatareceived"/> <stat_bar label="實入" name="messagedatain"/> <stat_bar label="實出" name="messagedataout"/> - <stat_bar label="VFS 待行作業" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="模擬器" name="sim"> diff --git a/indra/newview/skins/default/xui/zh/floater_stats.xml b/indra/newview/skins/default/xui/zh/floater_stats.xml index f06eb5e78f..e233ece527 100644 --- a/indra/newview/skins/default/xui/zh/floater_stats.xml +++ b/indra/newview/skins/default/xui/zh/floater_stats.xml @@ -56,7 +56,6 @@ <stat_bar label="層次" name="layersdatareceived"/> <stat_bar label="實入" name="messagedatain"/> <stat_bar label="實出" name="messagedataout"/> - <stat_bar label="VFS 待行作業" name="vfspendingoperations"/> </stat_view> </stat_view> <stat_view label="模擬器" name="sim"> diff --git a/indra/newview/skins/default/xui/zh/strings.xml b/indra/newview/skins/default/xui/zh/strings.xml index e6c61a5d94..3221cde3b7 100644 --- a/indra/newview/skins/default/xui/zh/strings.xml +++ b/indra/newview/skins/default/xui/zh/strings.xml @@ -31,9 +31,6 @@ <string name="StartupInitializingTextureCache"> 正在初始化材質快取... </string> - <string name="StartupInitializingVFS"> - VFS 初始化中... - </string> <string name="StartupRequireDriverUpdate"> 顯像初始化失敗。 請更新你的顯像卡驅動程式！ </string> @@ -74,7 +71,6 @@ 呈像品質：[RENDER_QUALITY] 進階照明模型：[GPU_SHADERS] 材質記憶體：[TEXTURE_MEMORY]MB -VFS（快取）建立時間：[VFS_TIME] </string> <string name="AboutOSXHiDPI"> HiDPI顯示模式：[HIDPI] diff --git a/indra/newview/viewer_manifest.py b/indra/newview/viewer_manifest.py index 6fcd1e84e8..a814bd2849 100755 --- a/indra/newview/viewer_manifest.py +++ b/indra/newview/viewer_manifest.py @@ -69,7 +69,6 @@ class ViewerManifest(LLManifest): self.exclude("logcontrol-dev.xml") self.path("*.ini") self.path("*.xml") - self.path("*.db2") # include the entire shaders directory recursively self.path("shaders") @@ -158,18 +157,12 @@ class ViewerManifest(LLManifest): self.path("*/xui/*/widgets/*.xml") self.path("*/*.xml") - # Local HTML files (e.g. loading screen) - # The claim is that we never use local html files any - # longer. But rather than commenting out this block, let's - # rename every html subdirectory as html.old. That way, if - # we're wrong, a user actually does have the relevant - # files; s/he just needs to rename every html.old - # directory back to html to recover them. - with self.prefix(src="*/html", dst="*/html.old"): - self.path("*.png") - self.path("*/*/*.html") - self.path("*/*/*.gif") - + # Update: 2017-11-01 CP Now we store app code in the html folder + # Initially the HTML/JS code to render equirectangular + # images for the 360 capture feature but more to follow. + with self.prefix(src="*/html", dst="*/html"): + self.path("*/*/*/*.js") + self.path("*/*/*.html") #build_data.json. Standard with exception handling is fine. If we can't open a new file for writing, we have worse problems #platform is computed above with other arg parsing |
