summaryrefslogtreecommitdiff
path: root/indra/newview/llviewerobject.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'indra/newview/llviewerobject.cpp')
-rw-r--r--indra/newview/llviewerobject.cpp620
1 files changed, 539 insertions, 81 deletions
diff --git a/indra/newview/llviewerobject.cpp b/indra/newview/llviewerobject.cpp
index 25cc24da95..e7878d8adf 100644
--- a/indra/newview/llviewerobject.cpp
+++ b/indra/newview/llviewerobject.cpp
@@ -47,6 +47,7 @@
#include "llprimitive.h"
#include "llquantize.h"
#include "llregionhandle.h"
+#include "llsdserialize.h"
#include "lltree_common.h"
#include "llxfermanager.h"
#include "message.h"
@@ -62,7 +63,9 @@
#include "lldrawable.h"
#include "llface.h"
#include "llfloaterproperties.h"
+#include "llfloatertools.h"
#include "llfollowcam.h"
+#include "llhudtext.h"
#include "llselectmgr.h"
#include "llrendersphere.h"
#include "lltooldraganddrop.h"
@@ -99,11 +102,12 @@
#include "lltrans.h"
#include "llsdutil.h"
#include "llmediaentry.h"
+#include "llaccountingquota.h"
//#define DEBUG_UPDATE_TYPE
-BOOL gVelocityInterpolate = TRUE;
-BOOL gPingInterpolate = TRUE;
+BOOL LLViewerObject::sVelocityInterpolate = TRUE;
+BOOL LLViewerObject::sPingInterpolate = TRUE;
U32 LLViewerObject::sNumZombieObjects = 0;
S32 LLViewerObject::sNumObjects = 0;
@@ -114,6 +118,11 @@ S32 LLViewerObject::sAxisArrowLength(50);
BOOL LLViewerObject::sPulseEnabled(FALSE);
BOOL LLViewerObject::sUseSharedDrawables(FALSE); // TRUE
+// sMaxUpdateInterpolationTime must be greater than sPhaseOutUpdateInterpolationTime
+F64 LLViewerObject::sMaxUpdateInterpolationTime = 3.0; // For motion interpolation: after X seconds with no updates, don't predict object motion
+F64 LLViewerObject::sPhaseOutUpdateInterpolationTime = 2.0; // For motion interpolation: after Y seconds with no updates, taper off motion prediction
+
+
static LLFastTimer::DeclareTimer FTM_CREATE_OBJECT("Create Object");
// static
@@ -167,8 +176,10 @@ LLViewerObject *LLViewerObject::createObject(const LLUUID &id, const LLPCode pco
res = new LLVOSurfacePatch(id, pcode, regionp); break;
case LL_VO_SKY:
res = new LLVOSky(id, pcode, regionp); break;
+ case LL_VO_VOID_WATER:
+ res = new LLVOVoidWater(id, pcode, regionp); break;
case LL_VO_WATER:
- res = new LLVOWater(id, pcode, regionp); break;
+ res = new LLVOWater(id, pcode, regionp); break;
case LL_VO_GROUND:
res = new LLVOGround(id, pcode, regionp); break;
case LL_VO_PART_GROUP:
@@ -194,6 +205,11 @@ LLViewerObject::LLViewerObject(const LLUUID &id, const LLPCode pcode, LLViewerRe
mGLName(0),
mbCanSelect(TRUE),
mFlags(0),
+ mPhysicsShapeType(0),
+ mPhysicsGravity(0),
+ mPhysicsFriction(0),
+ mPhysicsDensity(0),
+ mPhysicsRestitution(0),
mDrawable(),
mCreateSelected(FALSE),
mRenderMedia(FALSE),
@@ -225,7 +241,15 @@ LLViewerObject::LLViewerObject(const LLUUID &id, const LLPCode pcode, LLViewerRe
mState(0),
mMedia(NULL),
mClickAction(0),
- mAttachmentItemID(LLUUID::null)
+ mObjectCost(0),
+ mLinksetCost(0),
+ mPhysicsCost(0),
+ mLinksetPhysicsCost(0.f),
+ mCostStale(true),
+ mPhysicsShapeUnknown(true),
+ mAttachmentItemID(LLUUID::null),
+ mLastUpdateType(OUT_UNKNOWN),
+ mLastUpdateCached(FALSE)
{
if (!is_global)
{
@@ -459,15 +483,9 @@ void LLViewerObject::initVOClasses()
// Initialized shared class stuff first.
LLVOAvatar::initClass();
LLVOTree::initClass();
- if (gNoRender)
- {
- // Don't init anything else in drone mode
- return;
- }
llinfos << "Viewer Object size: " << sizeof(LLViewerObject) << llendl;
LLVOGrass::initClass();
LLVOWater::initClass();
- LLVOSky::initClass();
LLVOVolume::initClass();
}
@@ -507,20 +525,23 @@ void LLViewerObject::setNameValueList(const std::string& name_value_list)
// This method returns true if the object is over land owned by the
// agent.
-BOOL LLViewerObject::isOverAgentOwnedLand() const
+bool LLViewerObject::isReturnable()
{
- return mRegionp
- && mRegionp->getParcelOverlay()
- && mRegionp->getParcelOverlay()->isOwnedSelf(getPositionRegion());
-}
+ if (isAttachment())
+ {
+ return false;
+ }
+ std::vector<LLBBox> boxes;
+ boxes.push_back(LLBBox(getPositionRegion(), getRotationRegion(), getScale() * -0.5f, getScale() * 0.5f).getAxisAligned());
+ for (child_list_t::iterator iter = mChildList.begin();
+ iter != mChildList.end(); iter++)
+ {
+ LLViewerObject* child = *iter;
+ boxes.push_back(LLBBox(child->getPositionRegion(), child->getRotationRegion(), child->getScale() * -0.5f, child->getScale() * 0.5f).getAxisAligned());
+ }
-// This method returns true if the object is over land owned by the
-// agent.
-BOOL LLViewerObject::isOverGroupOwnedLand() const
-{
- return mRegionp
- && mRegionp->getParcelOverlay()
- && mRegionp->getParcelOverlay()->isOwnedGroup(getPositionRegion());
+ return mRegionp
+ && mRegionp->objectIsReturnable(getPositionRegion(), boxes);
}
BOOL LLViewerObject::setParent(LLViewerObject* parent)
@@ -838,6 +859,13 @@ U32 LLViewerObject::processUpdateMessage(LLMessageSystem *mesgsys,
#ifdef DEBUG_UPDATE_TYPE
llinfos << "Full:" << getID() << llendl;
#endif
+ //clear cost and linkset cost
+ mCostStale = true;
+ if (isSelected())
+ {
+ gFloaterTools->dirty();
+ }
+
LLUUID audio_uuid;
LLUUID owner_id; // only valid if audio_uuid or particle system is not null
F32 gain;
@@ -1092,7 +1120,7 @@ U32 LLViewerObject::processUpdateMessage(LLMessageSystem *mesgsys,
// alpha was flipped so that it zero encoded better
coloru.mV[3] = 255 - coloru.mV[3];
mText->setColor(LLColor4(coloru));
- mText->setStringUTF8(temp_string);
+ mText->setString(temp_string);
if (mDrawable.notNull())
{
@@ -1403,6 +1431,13 @@ U32 LLViewerObject::processUpdateMessage(LLMessageSystem *mesgsys,
#ifdef DEBUG_UPDATE_TYPE
llinfos << "CompFull:" << getID() << llendl;
#endif
+ mCostStale = true;
+
+ if (isSelected())
+ {
+ gFloaterTools->dirty();
+ }
+
dp->unpackU32(crc, "CRC");
mTotalCRC = crc;
dp->unpackU8(material, "Material");
@@ -1484,7 +1519,7 @@ U32 LLViewerObject::processUpdateMessage(LLMessageSystem *mesgsys,
dp->unpackBinaryDataFixed(coloru.mV, 4, "Color");
coloru.mV[3] = 255 - coloru.mV[3];
mText->setColor(LLColor4(coloru));
- mText->setStringUTF8(temp_string);
+ mText->setString(temp_string);
setChanged(TEXTURE);
}
@@ -1838,13 +1873,13 @@ U32 LLViewerObject::processUpdateMessage(LLMessageSystem *mesgsys,
new_rot.normQuat();
- if (gPingInterpolate)
+ if (sPingInterpolate)
{
LLCircuitData *cdp = gMessageSystem->mCircuitInfo.findCircuit(mesgsys->getSender());
if (cdp)
{
F32 ping_delay = 0.5f * mTimeDilation * ( ((F32)cdp->getPingDelay()) * 0.001f + gFrameDTClamped);
- LLVector3 diff = getVelocity() * (0.5f*mTimeDilation*(gFrameDTClamped + ((F32)ping_delay)*0.001f));
+ LLVector3 diff = getVelocity() * ping_delay;
new_pos_parent += diff;
}
else
@@ -1859,6 +1894,8 @@ U32 LLViewerObject::processUpdateMessage(LLMessageSystem *mesgsys,
//
//
+ // WTF? If we're going to skip this message, why are we
+ // doing all the parenting, etc above?
U32 packet_id = mesgsys->getCurrentRecvPacketID();
if (packet_id < mLatestRecvPacketID &&
mLatestRecvPacketID - packet_id < 65536)
@@ -1999,7 +2036,7 @@ U32 LLViewerObject::processUpdateMessage(LLMessageSystem *mesgsys,
// U32 ping_delay = mesgsys->mCircuitInfo.getPingDelay();
mLastInterpUpdateSecs = LLFrameTimer::getElapsedSeconds();
- mLastMessageUpdateSecs = LLFrameTimer::getElapsedSeconds();
+ mLastMessageUpdateSecs = mLastInterpUpdateSecs;
if (mDrawable.notNull())
{
// Don't clear invisibility flag on update if still orphaned!
@@ -2026,6 +2063,8 @@ BOOL LLViewerObject::isActive() const
return TRUE;
}
+
+
BOOL LLViewerObject::idleUpdate(LLAgent &agent, LLWorld &world, const F64 &time)
{
static LLFastTimer::DeclareTimer ftm("Viewer Object");
@@ -2039,7 +2078,7 @@ BOOL LLViewerObject::idleUpdate(LLAgent &agent, LLWorld &world, const F64 &time)
// CRO - don't velocity interp linked objects!
// Leviathan - but DO velocity interp joints
- if (!mStatic && gVelocityInterpolate && !isSelected())
+ if (!mStatic && sVelocityInterpolate && !isSelected())
{
// calculate dt from last update
F32 dt_raw = (F32)(time - mLastInterpUpdateSecs);
@@ -2129,48 +2168,170 @@ BOOL LLViewerObject::idleUpdate(LLAgent &agent, LLWorld &world, const F64 &time)
return TRUE;
}
else
- {
- // linear motion
- // PHYSICS_TIMESTEP is used below to correct for the fact that the velocity in object
- // updates represents the average velocity of the last timestep, rather than the final velocity.
- // the time dilation above should guarantee that dt is never less than PHYSICS_TIMESTEP, theoretically
- //
- // There is a problem here if dt is negative. . .
-
- // *TODO: should also wrap linear accel/velocity in check
- // to see if object is selected, instead of explicitly
- // zeroing it out
- LLVector3 accel = getAcceleration();
- LLVector3 vel = getVelocity();
-
- if (!(accel.isExactlyZero() && vel.isExactlyZero()))
- {
- LLVector3 pos = (vel + (0.5f * (dt-PHYSICS_TIMESTEP)) * accel) * dt;
-
- // region local
- setPositionRegion(pos + getPositionRegion());
- setVelocity(vel + accel*dt);
-
- // for objects that are spinning but not translating, make sure to flag them as having moved
- setChanged(MOVED | SILHOUETTE);
- }
-
- mLastInterpUpdateSecs = time;
+ { // Move object based on it's velocity and rotation
+ interpolateLinearMotion(time, dt);
}
}
- if (gNoRender)
+ updateDrawable(FALSE);
+
+ return TRUE;
+}
+
+
+// Move an object due to idle-time viewer side updates by iterpolating motion
+void LLViewerObject::interpolateLinearMotion(const F64 & time, const F32 & dt)
+{
+ // linear motion
+ // PHYSICS_TIMESTEP is used below to correct for the fact that the velocity in object
+ // updates represents the average velocity of the last timestep, rather than the final velocity.
+ // the time dilation above should guarantee that dt is never less than PHYSICS_TIMESTEP, theoretically
+ //
+ // *TODO: should also wrap linear accel/velocity in check
+ // to see if object is selected, instead of explicitly
+ // zeroing it out
+
+ F64 time_since_last_update = time - mLastMessageUpdateSecs;
+ if (time_since_last_update <= 0.0 || dt <= 0.f)
{
- // Skip drawable stuff if not rendering.
- return TRUE;
+ return;
}
- updateDrawable(FALSE);
+ LLVector3 accel = getAcceleration();
+ LLVector3 vel = getVelocity();
+
+ if (sMaxUpdateInterpolationTime <= 0.0)
+ { // Old code path ... unbounded, simple interpolation
+ if (!(accel.isExactlyZero() && vel.isExactlyZero()))
+ {
+ LLVector3 pos = (vel + (0.5f * (dt-PHYSICS_TIMESTEP)) * accel) * dt;
+
+ // region local
+ setPositionRegion(pos + getPositionRegion());
+ setVelocity(vel + accel*dt);
+
+ // for objects that are spinning but not translating, make sure to flag them as having moved
+ setChanged(MOVED | SILHOUETTE);
+ }
+ }
+ else if (!accel.isExactlyZero() || !vel.isExactlyZero()) // object is moving
+ { // Object is moving, and hasn't been too long since we got an update from the server
+
+ // Calculate predicted position and velocity
+ LLVector3 new_pos = (vel + (0.5f * (dt-PHYSICS_TIMESTEP)) * accel) * dt;
+ LLVector3 new_v = accel * dt;
+
+ if (time_since_last_update > sPhaseOutUpdateInterpolationTime &&
+ sPhaseOutUpdateInterpolationTime > 0.0)
+ { // Haven't seen a viewer update in a while, check to see if the ciruit is still active
+ if (mRegionp)
+ { // The simulator will NOT send updates if the object continues normally on the path
+ // predicted by the velocity and the acceleration (often gravity) sent to the viewer
+ // So check to see if the circuit is blocked, which means the sim is likely in a long lag
+ LLCircuitData *cdp = gMessageSystem->mCircuitInfo.findCircuit( mRegionp->getHost() );
+ if (cdp)
+ {
+ // Find out how many seconds since last packet arrived on the circuit
+ F64 time_since_last_packet = LLMessageSystem::getMessageTimeSeconds() - cdp->getLastPacketInTime();
- return TRUE;
+ if (!cdp->isAlive() || // Circuit is dead or blocked
+ cdp->isBlocked() || // or doesn't seem to be getting any packets
+ (time_since_last_packet > sPhaseOutUpdateInterpolationTime))
+ {
+ // Start to reduce motion interpolation since we haven't seen a server update in a while
+ F64 time_since_last_interpolation = time - mLastInterpUpdateSecs;
+ F64 phase_out = 1.0;
+ if (time_since_last_update > sMaxUpdateInterpolationTime)
+ { // Past the time limit, so stop the object
+ phase_out = 0.0;
+ //llinfos << "Motion phase out to zero" << llendl;
+
+ // Kill angular motion as well. Note - not adding this due to paranoia
+ // about stopping rotation for llTargetOmega objects and not having it restart
+ // setAngularVelocity(LLVector3::zero);
+ }
+ else if (mLastInterpUpdateSecs - mLastMessageUpdateSecs > sPhaseOutUpdateInterpolationTime)
+ { // Last update was already phased out a bit
+ phase_out = (sMaxUpdateInterpolationTime - time_since_last_update) /
+ (sMaxUpdateInterpolationTime - time_since_last_interpolation);
+ //llinfos << "Continuing motion phase out of " << (F32) phase_out << llendl;
+ }
+ else
+ { // Phase out from full value
+ phase_out = (sMaxUpdateInterpolationTime - time_since_last_update) /
+ (sMaxUpdateInterpolationTime - sPhaseOutUpdateInterpolationTime);
+ //llinfos << "Starting motion phase out of " << (F32) phase_out << llendl;
+ }
+ phase_out = llclamp(phase_out, 0.0, 1.0);
+
+ new_pos = new_pos * ((F32) phase_out);
+ new_v = new_v * ((F32) phase_out);
+ }
+ }
+ }
+ }
+
+ new_pos = new_pos + getPositionRegion();
+ new_v = new_v + vel;
+
+
+ // Clamp interpolated position to minimum underground and maximum region height
+ LLVector3d new_pos_global = mRegionp->getPosGlobalFromRegion(new_pos);
+ F32 min_height;
+ if (isAvatar())
+ { // Make a better guess about AVs not going underground
+ min_height = LLWorld::getInstance()->resolveLandHeightGlobal(new_pos_global);
+ min_height += (0.5f * getScale().mV[VZ]);
+ }
+ else
+ { // This will put the object underground, but we can't tell if it will stop
+ // at ground level or not
+ min_height = LLWorld::getInstance()->getMinAllowedZ(this, new_pos_global);
+ }
+
+ new_pos.mV[VZ] = llmax(min_height, new_pos.mV[VZ]);
+ new_pos.mV[VZ] = llmin(LLWorld::getInstance()->getRegionMaxHeight(), new_pos.mV[VZ]);
+
+ // Check to see if it's going off the region
+ LLVector3 temp(new_pos);
+ if (temp.clamp(0.f, mRegionp->getWidth()))
+ { // Going off this region, so see if we might end up on another region
+ LLVector3d old_pos_global = mRegionp->getPosGlobalFromRegion(getPositionRegion());
+ new_pos_global = mRegionp->getPosGlobalFromRegion(new_pos); // Re-fetch in case it got clipped above
+
+ // Clip the positions to known regions
+ LLVector3d clip_pos_global = LLWorld::getInstance()->clipToVisibleRegions(old_pos_global, new_pos_global);
+ if (clip_pos_global != new_pos_global)
+ { // Was clipped, so this means we hit a edge where there is no region to enter
+
+ //llinfos << "Hit empty region edge, clipped predicted position to " << mRegionp->getPosRegionFromGlobal(clip_pos_global)
+ // << " from " << new_pos << llendl;
+ new_pos = mRegionp->getPosRegionFromGlobal(clip_pos_global);
+
+ // Stop motion and get server update for bouncing on the edge
+ new_v.clear();
+ setAcceleration(LLVector3::zero);
+ }
+ else
+ { // Let predicted movement cross into another region
+ //llinfos << "Predicting region crossing to " << new_pos << llendl;
+ }
+ }
+
+ // Set new position and velocity
+ setPositionRegion(new_pos);
+ setVelocity(new_v);
+
+ // for objects that are spinning but not translating, make sure to flag them as having moved
+ setChanged(MOVED | SILHOUETTE);
+ }
+
+ // Update the last time we did anything
+ mLastInterpUpdateSecs = time;
}
+
BOOL LLViewerObject::setData(const U8 *datap, const U32 data_size)
{
LLMemType mt(LLMemType::MTYPE_OBJECT);
@@ -2864,6 +3025,8 @@ void LLViewerObject::setScale(const LLVector3 &scale, BOOL damped)
{
if (!mOnMap)
{
+ llassert_always(LLWorld::getInstance()->getRegionFromHandle(getRegion()->getHandle()));
+
gObjectList.addToMap(this);
mOnMap = TRUE;
}
@@ -2879,21 +3042,126 @@ void LLViewerObject::setScale(const LLVector3 &scale, BOOL damped)
}
}
-void LLViewerObject::updateSpatialExtents(LLVector3& newMin, LLVector3 &newMax)
+void LLViewerObject::setObjectCost(F32 cost)
{
- LLVector3 center = getRenderPosition();
- LLVector3 size = getScale();
- newMin.setVec(center-size);
- newMax.setVec(center+size);
- mDrawable->setPositionGroup((newMin + newMax) * 0.5f);
+ mObjectCost = cost;
+ mCostStale = false;
+
+ if (isSelected())
+ {
+ gFloaterTools->dirty();
+ }
+}
+
+void LLViewerObject::setLinksetCost(F32 cost)
+{
+ mLinksetCost = cost;
+ mCostStale = false;
+
+ if (isSelected())
+ {
+ gFloaterTools->dirty();
+ }
+}
+
+void LLViewerObject::setPhysicsCost(F32 cost)
+{
+ mPhysicsCost = cost;
+ mCostStale = false;
+
+ if (isSelected())
+ {
+ gFloaterTools->dirty();
+ }
+}
+
+void LLViewerObject::setLinksetPhysicsCost(F32 cost)
+{
+ mLinksetPhysicsCost = cost;
+ mCostStale = false;
+
+ if (isSelected())
+ {
+ gFloaterTools->dirty();
+ }
+}
+
+
+F32 LLViewerObject::getObjectCost()
+{
+ if (mCostStale)
+ {
+ gObjectList.updateObjectCost(this);
+ }
+
+ return mObjectCost;
+}
+
+F32 LLViewerObject::getLinksetCost()
+{
+ if (mCostStale)
+ {
+ gObjectList.updateObjectCost(this);
+ }
+
+ return mLinksetCost;
+}
+
+F32 LLViewerObject::getPhysicsCost()
+{
+ if (mCostStale)
+ {
+ gObjectList.updateObjectCost(this);
+ }
+
+ return mPhysicsCost;
+}
+
+F32 LLViewerObject::getLinksetPhysicsCost()
+{
+ if (mCostStale)
+ {
+ gObjectList.updateObjectCost(this);
+ }
+
+ return mLinksetPhysicsCost;
+}
+
+F32 LLViewerObject::getStreamingCost(S32* bytes, S32* visible_bytes)
+{
+ return 0.f;
+}
+
+U32 LLViewerObject::getTriangleCount()
+{
+ return 0;
+}
+
+U32 LLViewerObject::getHighLODTriangleCount()
+{
+ return 0;
+}
+
+void LLViewerObject::updateSpatialExtents(LLVector4a& newMin, LLVector4a &newMax)
+{
+ LLVector4a center;
+ center.load3(getRenderPosition().mV);
+ LLVector4a size;
+ size.load3(getScale().mV);
+ newMin.setSub(center, size);
+ newMax.setAdd(center, size);
+
+ mDrawable->setPositionGroup(center);
}
F32 LLViewerObject::getBinRadius()
{
if (mDrawable.notNull())
{
- const LLVector3* ext = mDrawable->getSpatialExtents();
- return (ext[1]-ext[0]).magVec();
+ const LLVector4a* ext = mDrawable->getSpatialExtents();
+ LLVector4a diff;
+ diff.setSub(ext[1], ext[0]);
+ return diff.getLength3().getF32();
}
return getScale().magVec();
@@ -2959,7 +3227,7 @@ void LLViewerObject::boostTexturePriority(BOOL boost_children /* = TRUE */)
getTEImage(i)->setBoostLevel(LLViewerTexture::BOOST_SELECTED);
}
- if (isSculpted())
+ if (isSculpted() && !isMesh())
{
LLSculptParams *sculpt_params = (LLSculptParams *)getParameterEntry(LLNetworkData::PARAMS_SCULPT);
LLUUID sculpt_id = sculpt_params->getSculptTexture();
@@ -3199,6 +3467,15 @@ const LLVector3 LLViewerObject::getPositionEdit() const
const LLVector3 LLViewerObject::getRenderPosition() const
{
+ if (mDrawable.notNull() && mDrawable->isState(LLDrawable::RIGGED))
+ {
+ LLVOAvatar* avatar = getAvatar();
+ if (avatar)
+ {
+ return avatar->getPositionAgent();
+ }
+ }
+
if (mDrawable.isNull() || mDrawable->getGeneration() < 0)
{
return getPositionAgent();
@@ -3217,6 +3494,11 @@ const LLVector3 LLViewerObject::getPivotPositionAgent() const
const LLQuaternion LLViewerObject::getRenderRotation() const
{
LLQuaternion ret;
+ if (mDrawable.notNull() && mDrawable->isState(LLDrawable::RIGGED))
+ {
+ return ret;
+ }
+
if (mDrawable.isNull() || mDrawable->isStatic())
{
ret = getRotationEdit();
@@ -3391,8 +3673,8 @@ void LLViewerObject::setPositionParent(const LLVector3 &pos_parent, BOOL damped)
// Set position relative to parent, if no parent, relative to region
if (!isRoot())
{
- LLViewerObject::setPosition(pos_parent);
- updateDrawable(damped);
+ LLViewerObject::setPosition(pos_parent, damped);
+ //updateDrawable(damped);
}
else
{
@@ -3433,6 +3715,7 @@ void LLViewerObject::setPositionEdit(const LLVector3 &pos_edit, BOOL damped)
LLVector3 position_offset = getPosition() * getParent()->getRotation();
((LLViewerObject *)getParent())->setPositionEdit(pos_edit - position_offset);
+ updateDrawable(damped);
}
else if (isJointChild())
{
@@ -3441,15 +3724,14 @@ void LLViewerObject::setPositionEdit(const LLVector3 &pos_edit, BOOL damped)
LLQuaternion inv_parent_rot = parent->getRotation();
inv_parent_rot.transQuat();
LLVector3 pos_parent = (pos_edit - parent->getPositionRegion()) * inv_parent_rot;
- LLViewerObject::setPosition(pos_parent);
+ LLViewerObject::setPosition(pos_parent, damped);
}
else
{
- LLViewerObject::setPosition(pos_edit);
+ LLViewerObject::setPosition(pos_edit, damped);
mPositionRegion = pos_edit;
mPositionAgent = mRegionp->getPosAgentFromRegion(mPositionRegion);
- }
- updateDrawable(damped);
+ }
}
@@ -3485,12 +3767,21 @@ BOOL LLViewerObject::lineSegmentBoundingBox(const LLVector3& start, const LLVect
return FALSE;
}
- const LLVector3* ext = mDrawable->getSpatialExtents();
+ const LLVector4a* ext = mDrawable->getSpatialExtents();
- LLVector3 center = (ext[1]+ext[0])*0.5f;
- LLVector3 size = (ext[1]-ext[0])*0.5f;
+ //VECTORIZE THIS
+ LLVector4a center;
+ center.setAdd(ext[1], ext[0]);
+ center.mul(0.5f);
+ LLVector4a size;
+ size.setSub(ext[1], ext[0]);
+ size.mul(0.5f);
- return LLLineSegmentBoxIntersect(start, end, center, size);
+ LLVector4a starta, enda;
+ starta.load3(start.mV);
+ enda.load3(end.mV);
+
+ return LLLineSegmentBoxIntersect(starta, enda, center, size);
}
U8 LLViewerObject::getMediaType() const
@@ -4150,7 +4441,7 @@ void LLViewerObject::setDebugText(const std::string &utf8text)
mText->setOnHUDAttachment(isHUDAttachment());
}
mText->setColor(LLColor4::white);
- mText->setStringUTF8(utf8text);
+ mText->setString(utf8text);
mText->setZCompare(FALSE);
mText->setDoFade(FALSE);
updateText();
@@ -4445,6 +4736,13 @@ void LLViewerObject::setAttachedSound(const LLUUID &audio_uuid, const LLUUID& ow
mAudioSourcep = NULL;
}
+ if (mAudioSourcep && mAudioSourcep->isMuted() &&
+ mAudioSourcep->getCurrentData() && mAudioSourcep->getCurrentData()->getID() == audio_uuid)
+ {
+ //llinfos << "Already having this sound as muted sound, ignoring" << llendl;
+ return;
+ }
+
getAudioSource(owner_id);
if (mAudioSourcep)
@@ -4964,6 +5262,20 @@ void LLViewerObject::setRegion(LLViewerRegion *regionp)
updateDrawable(FALSE);
}
+// virtual
+void LLViewerObject::updateRegion(LLViewerRegion *regionp)
+{
+// if (regionp)
+// {
+// F64 now = LLFrameTimer::getElapsedSeconds();
+// llinfos << "Updating to region " << regionp->getName()
+// << ", ms since last update message: " << (F32)((now - mLastMessageUpdateSecs) * 1000.0)
+// << ", ms since last interpolation: " << (F32)((now - mLastInterpUpdateSecs) * 1000.0)
+// << llendl;
+// }
+}
+
+
bool LLViewerObject::specialHoverCursor() const
{
return (mFlags & FLAGS_USE_PHYSICS)
@@ -4971,7 +5283,7 @@ bool LLViewerObject::specialHoverCursor() const
|| (mClickAction != 0);
}
-void LLViewerObject::updateFlags()
+void LLViewerObject::updateFlags(BOOL physics_changed)
{
LLViewerRegion* regionp = getRegion();
if(!regionp) return;
@@ -4984,6 +5296,15 @@ void LLViewerObject::updateFlags()
gMessageSystem->addBOOL("IsTemporary", flagTemporaryOnRez() );
gMessageSystem->addBOOL("IsPhantom", flagPhantom() );
gMessageSystem->addBOOL("CastsShadows", flagCastShadows() );
+ if (physics_changed)
+ {
+ gMessageSystem->nextBlock("ExtraPhysics");
+ gMessageSystem->addU8("PhysicsShapeType", getPhysicsShapeType() );
+ gMessageSystem->addF32("Density", getPhysicsDensity() );
+ gMessageSystem->addF32("Friction", getPhysicsFriction() );
+ gMessageSystem->addF32("Restitution", getPhysicsRestitution() );
+ gMessageSystem->addF32("GravityMultiplier", getPhysicsGravity() );
+ }
gMessageSystem->sendReliable( regionp->getHost() );
}
@@ -5016,6 +5337,44 @@ BOOL LLViewerObject::setFlags(U32 flags, BOOL state)
return setit;
}
+void LLViewerObject::setPhysicsShapeType(U8 type)
+{
+ mPhysicsShapeUnknown = false;
+ mPhysicsShapeType = type;
+ mCostStale = true;
+}
+
+void LLViewerObject::setPhysicsGravity(F32 gravity)
+{
+ mPhysicsGravity = gravity;
+}
+
+void LLViewerObject::setPhysicsFriction(F32 friction)
+{
+ mPhysicsFriction = friction;
+}
+
+void LLViewerObject::setPhysicsDensity(F32 density)
+{
+ mPhysicsDensity = density;
+}
+
+void LLViewerObject::setPhysicsRestitution(F32 restitution)
+{
+ mPhysicsRestitution = restitution;
+}
+
+U8 LLViewerObject::getPhysicsShapeType() const
+{
+ if (mPhysicsShapeUnknown)
+ {
+ mPhysicsShapeUnknown = false;
+ gObjectList.updatePhysicsFlags(this);
+ }
+
+ return mPhysicsShapeType;
+}
+
void LLViewerObject::applyAngularVelocity(F32 dt)
{
//do target omega here
@@ -5237,6 +5596,26 @@ void LLViewerObject::setAttachmentItemID(const LLUUID &id)
mAttachmentItemID = id;
}
+EObjectUpdateType LLViewerObject::getLastUpdateType() const
+{
+ return mLastUpdateType;
+}
+
+void LLViewerObject::setLastUpdateType(EObjectUpdateType last_update_type)
+{
+ mLastUpdateType = last_update_type;
+}
+
+BOOL LLViewerObject::getLastUpdateCached() const
+{
+ return mLastUpdateCached;
+}
+
+void LLViewerObject::setLastUpdateCached(BOOL last_update_cached)
+{
+ mLastUpdateCached = last_update_cached;
+}
+
const LLUUID &LLViewerObject::extractAttachmentItemID()
{
LLUUID item_id = LLUUID::null;
@@ -5252,3 +5631,82 @@ const LLUUID &LLViewerObject::extractAttachmentItemID()
setAttachmentItemID(item_id);
return getAttachmentItemID();
}
+
+//virtual
+LLVOAvatar* LLViewerObject::getAvatar() const
+{
+ if (isAttachment())
+ {
+ LLViewerObject* vobj = (LLViewerObject*) getParent();
+
+ while (vobj && !vobj->asAvatar())
+ {
+ vobj = (LLViewerObject*) vobj->getParent();
+ }
+
+ return (LLVOAvatar*) vobj;
+ }
+
+ return NULL;
+}
+
+
+class ObjectPhysicsProperties : public LLHTTPNode
+{
+public:
+ virtual void post(
+ ResponsePtr responder,
+ const LLSD& context,
+ const LLSD& input) const
+ {
+ LLSD object_data = input["body"]["ObjectData"];
+ S32 num_entries = object_data.size();
+
+ for ( S32 i = 0; i < num_entries; i++ )
+ {
+ LLSD& curr_object_data = object_data[i];
+ U32 local_id = curr_object_data["LocalID"].asInteger();
+
+ // Iterate through nodes at end, since it can be on both the regular AND hover list
+ struct f : public LLSelectedNodeFunctor
+ {
+ U32 mID;
+ f(const U32& id) : mID(id) {}
+ virtual bool apply(LLSelectNode* node)
+ {
+ return (node->getObject() && node->getObject()->mLocalID == mID );
+ }
+ } func(local_id);
+
+ LLSelectNode* node = LLSelectMgr::getInstance()->getSelection()->getFirstNode(&func);
+
+ if (node)
+ {
+ // The LLSD message builder doesn't know how to handle U8, so we need to send as S8 and cast
+ U8 type = (U8)curr_object_data["PhysicsShapeType"].asInteger();
+ F32 density = (F32)curr_object_data["Density"].asReal();
+ F32 friction = (F32)curr_object_data["Friction"].asReal();
+ F32 restitution = (F32)curr_object_data["Restitution"].asReal();
+ F32 gravity = (F32)curr_object_data["GravityMultiplier"].asReal();
+
+ node->getObject()->setPhysicsShapeType(type);
+ node->getObject()->setPhysicsGravity(gravity);
+ node->getObject()->setPhysicsFriction(friction);
+ node->getObject()->setPhysicsDensity(density);
+ node->getObject()->setPhysicsRestitution(restitution);
+ }
+ }
+
+ dialog_refresh_all();
+ };
+};
+
+LLHTTPRegistration<ObjectPhysicsProperties>
+ gHTTPRegistrationObjectPhysicsProperties("/message/ObjectPhysicsProperties");
+
+
+void LLViewerObject::updateQuota( const SelectionQuota& quota )
+{
+ //update quotas
+ mSelectionQuota = quota;
+}
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-25 07:52:45 +0000