diff options
Diffstat (limited to 'indra/newview/app_settings/shaders/class1/deferred/materialF.glsl')
-rw-r--r-- | indra/newview/app_settings/shaders/class1/deferred/materialF.glsl | 349 |
1 files changed, 33 insertions, 316 deletions
diff --git a/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl b/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl index 07d28ed4cd..4dc15dbc89 100644 --- a/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl +++ b/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl @@ -23,6 +23,8 @@ * $/LicenseInfo$ */ +/*[EXTRA_CODE_HERE]*/ + #define DIFFUSE_ALPHA_MODE_IGNORE 0 #define DIFFUSE_ALPHA_MODE_BLEND 1 #define DIFFUSE_ALPHA_MODE_MASK 2 @@ -31,42 +33,18 @@ uniform float emissive_brightness; uniform float display_gamma; -vec3 srgb_to_linear(vec3 cs) -{ - vec3 low_range = cs / vec3(12.92); - vec3 high_range = pow((cs+vec3(0.055))/vec3(1.055), vec3(2.4)); - bvec3 lte = lessThanEqual(cs,vec3(0.04045)); - -#ifdef OLD_SELECT - vec3 result; - result.r = lte.r ? low_range.r : high_range.r; - result.g = lte.g ? low_range.g : high_range.g; - result.b = lte.b ? low_range.b : high_range.b; - return result; -#else - return mix(high_range, low_range, lte); +#ifdef WATER_FOG +vec4 applyWaterFogView(vec3 pos, vec4 color); #endif -} +vec3 srgb_to_linear(vec3 cs); +vec3 linear_to_srgb(vec3 cl); -vec3 linear_to_srgb(vec3 cl) -{ - cl = clamp(cl, vec3(0), vec3(1)); - vec3 low_range = cl * 12.92; - vec3 high_range = 1.055 * pow(cl, vec3(0.41666)) - 0.055; - bvec3 lt = lessThan(cl,vec3(0.0031308)); - -#ifdef OLD_SELECT - vec3 result; - result.r = lt.r ? low_range.r : high_range.r; - result.g = lt.g ? low_range.g : high_range.g; - result.b = lt.b ? low_range.b : high_range.b; - return result; -#else - return mix(high_range, low_range, lt); -#endif - -} +vec3 atmosFragAmbient(vec3 l, vec3 ambient); +vec3 atmosFragLighting(vec3 l, vec3 additive, vec3 atten); +vec3 scaleFragSoftClip(vec3 l); +vec3 atmosFragAffectDirectionalLight(float intensity, vec3 sunlit); +void calcFragAtmospherics(vec3 inPositionEye, float ambFactor, out vec3 sunlit, out vec3 amblit, out vec3 additive, out vec3 atten); #if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_BLEND) @@ -116,34 +94,15 @@ uniform vec4 morphFactor; uniform vec3 camPosLocal; //uniform vec4 camPosWorld; uniform vec4 gamma; -uniform vec4 lightnorm; -uniform vec4 sunlight_color; -uniform vec4 ambient; -uniform vec4 blue_horizon; -uniform vec4 blue_density; -uniform float haze_horizon; -uniform float haze_density; -uniform float cloud_shadow; -uniform float density_multiplier; -uniform float distance_multiplier; -uniform float max_y; -uniform vec4 glow; -uniform float scene_light_strength; uniform mat3 env_mat; uniform mat3 ssao_effect_mat; uniform vec3 sun_dir; +uniform vec3 moon_dir; VARYING vec2 vary_fragcoord; VARYING vec3 vary_position; -vec3 vary_PositionEye; - -vec3 vary_SunlitColor; -vec3 vary_AmblitColor; -vec3 vary_AdditiveColor; -vec3 vary_AtmosAttenuation; - uniform mat4 inv_proj; uniform vec2 screen_res; @@ -152,52 +111,6 @@ uniform vec3 light_direction[8]; uniform vec3 light_attenuation[8]; uniform vec3 light_diffuse[8]; -#ifdef WATER_FOG -uniform vec4 waterPlane; -uniform vec4 waterFogColor; -uniform float waterFogDensity; -uniform float waterFogKS; - -vec4 applyWaterFogDeferred(vec3 pos, vec4 color) -{ - //normalize view vector - vec3 view = normalize(pos); - float es = -(dot(view, waterPlane.xyz)); - - //find intersection point with water plane and eye vector - - //get eye depth - float e0 = max(-waterPlane.w, 0.0); - - vec3 int_v = waterPlane.w > 0.0 ? view * waterPlane.w/es : vec3(0.0, 0.0, 0.0); - - //get object depth - float depth = length(pos - int_v); - - //get "thickness" of water - float l = max(depth, 0.1); - - float kd = waterFogDensity; - float ks = waterFogKS; - vec4 kc = waterFogColor; - - float F = 0.98; - - float t1 = -kd * pow(F, ks * e0); - float t2 = kd + ks * es; - float t3 = pow(F, t2*l) - 1.0; - - float L = min(t1/t2*t3, 1.0); - - float D = pow(0.98, l*kd); - - color.rgb = color.rgb * D + kc.rgb * L; - color.a = kc.a + color.a; - - return color; -} -#endif - vec3 calcDirectionalLight(vec3 n, vec3 l) { float a = max(dot(n,l),0.0); @@ -283,198 +196,6 @@ vec4 getPosition_d(vec2 pos_screen, float depth) return pos; } -#ifndef WATER_FOG -vec3 getPositionEye() -{ - return vary_PositionEye; -} -#endif - -vec3 getSunlitColor() -{ - return vary_SunlitColor; -} -vec3 getAmblitColor() -{ - return vary_AmblitColor; -} -vec3 getAdditiveColor() -{ - return vary_AdditiveColor; -} -vec3 getAtmosAttenuation() -{ - return vary_AtmosAttenuation; -} - -void setPositionEye(vec3 v) -{ - vary_PositionEye = v; -} - -void setSunlitColor(vec3 v) -{ - vary_SunlitColor = v; -} - -void setAmblitColor(vec3 v) -{ - vary_AmblitColor = v; -} - -void setAdditiveColor(vec3 v) -{ - vary_AdditiveColor = v; -} - -void setAtmosAttenuation(vec3 v) -{ - vary_AtmosAttenuation = v; -} - -void calcAtmospherics(vec3 inPositionEye, float ambFactor) { - - vec3 P = inPositionEye; - setPositionEye(P); - - vec3 tmpLightnorm = lightnorm.xyz; - - vec3 Pn = normalize(P); - float Plen = length(P); - - vec4 temp1 = vec4(0); - vec3 temp2 = vec3(0); - vec4 blue_weight; - vec4 haze_weight; - vec4 sunlight = sunlight_color; - vec4 light_atten; - - //sunlight attenuation effect (hue and brightness) due to atmosphere - //this is used later for sunlight modulation at various altitudes - light_atten = (blue_density + vec4(haze_density * 0.25)) * (density_multiplier * max_y); - //I had thought blue_density and haze_density should have equal weighting, - //but attenuation due to haze_density tends to seem too strong - - temp1 = blue_density + vec4(haze_density); - blue_weight = blue_density / temp1; - haze_weight = vec4(haze_density) / temp1; - - //(TERRAIN) compute sunlight from lightnorm only (for short rays like terrain) - temp2.y = max(0.0, tmpLightnorm.y); - temp2.y = 1. / temp2.y; - sunlight *= exp( - light_atten * temp2.y); - - // main atmospheric scattering line integral - temp2.z = Plen * density_multiplier; - - // Transparency (-> temp1) - // ATI Bugfix -- can't store temp1*temp2.z*distance_multiplier in a variable because the ati - // compiler gets confused. - temp1 = exp(-temp1 * temp2.z * distance_multiplier); - - //final atmosphere attenuation factor - setAtmosAttenuation(temp1.rgb); - - //compute haze glow - //(can use temp2.x as temp because we haven't used it yet) - temp2.x = dot(Pn, tmpLightnorm.xyz); - temp2.x = 1. - temp2.x; - //temp2.x is 0 at the sun and increases away from sun - temp2.x = max(temp2.x, .03); //was glow.y - //set a minimum "angle" (smaller glow.y allows tighter, brighter hotspot) - temp2.x *= glow.x; - //higher glow.x gives dimmer glow (because next step is 1 / "angle") - temp2.x = pow(temp2.x, glow.z); - //glow.z should be negative, so we're doing a sort of (1 / "angle") function - - //add "minimum anti-solar illumination" - temp2.x += .25; - - //increase ambient when there are more clouds - vec4 tmpAmbient = ambient + (vec4(1.) - ambient) * cloud_shadow * 0.5; - - /* decrease value and saturation (that in HSV, not HSL) for occluded areas - * // for HSV color/geometry used here, see http://gimp-savvy.com/BOOK/index.html?node52.html - * // The following line of code performs the equivalent of: - * float ambAlpha = tmpAmbient.a; - * float ambValue = dot(vec3(tmpAmbient), vec3(0.577)); // projection onto <1/rt(3), 1/rt(3), 1/rt(3)>, the neutral white-black axis - * vec3 ambHueSat = vec3(tmpAmbient) - vec3(ambValue); - * tmpAmbient = vec4(RenderSSAOEffect.valueFactor * vec3(ambValue) + RenderSSAOEffect.saturationFactor *(1.0 - ambFactor) * ambHueSat, ambAlpha); - */ - tmpAmbient = vec4(mix(ssao_effect_mat * tmpAmbient.rgb, tmpAmbient.rgb, ambFactor), tmpAmbient.a); - - //haze color - setAdditiveColor( - vec3(blue_horizon * blue_weight * (sunlight*(1.-cloud_shadow) + tmpAmbient) - + (haze_horizon * haze_weight) * (sunlight*(1.-cloud_shadow) * temp2.x - + tmpAmbient))); - - //brightness of surface both sunlight and ambient - setSunlitColor(vec3(sunlight * .5)); - setAmblitColor(vec3(tmpAmbient * .25)); - setAdditiveColor(getAdditiveColor() * vec3(1.0 - temp1)); -} - -vec3 atmosLighting(vec3 light) -{ - light *= getAtmosAttenuation().r; - light += getAdditiveColor(); - return (2.0 * light); -} - -vec3 atmosTransport(vec3 light) { - light *= getAtmosAttenuation().r; - light += getAdditiveColor() * 2.0; - return light; -} -vec3 atmosGetDiffuseSunlightColor() -{ - return getSunlitColor(); -} - -vec3 scaleDownLight(vec3 light) -{ - return (light / vec3(scene_light_strength, scene_light_strength, scene_light_strength)); -} - -vec3 scaleUpLight(vec3 light) -{ - return (light * vec3(scene_light_strength, scene_light_strength, scene_light_strength)); -} - -vec3 atmosAmbient(vec3 light) -{ - return getAmblitColor() + (light * vec3(0.5f, 0.5f, 0.5f)); -} - -vec3 atmosAffectDirectionalLight(float lightIntensity) -{ - return getSunlitColor() * vec3(lightIntensity, lightIntensity, lightIntensity); -} - -vec3 scaleSoftClip(vec3 light) -{ - //soft clip effect: - vec3 zeroes = vec3(0.0f, 0.0f, 0.0f); - vec3 ones = vec3(1.0f, 1.0f, 1.0f); - - light = ones - clamp(light, zeroes, ones); - light = ones - pow(light, gamma.xxx); - - return light; -} - -vec3 fullbrightAtmosTransport(vec3 light) { - float brightness = dot(light.rgb, vec3(0.33333)); - - return mix(atmosTransport(light.rgb), light.rgb + getAdditiveColor().rgb, brightness * brightness); -} - -vec3 fullbrightScaleSoftClip(vec3 light) -{ - //soft clip effect: - return light; -} #else #ifdef DEFINE_GL_FRAGCOLOR @@ -515,22 +236,8 @@ VARYING vec3 vary_normal; VARYING vec4 vertex_color; VARYING vec2 vary_texcoord0; -vec2 encode_normal(vec3 n) -{ - float f = sqrt(8 * n.z + 8); - return n.xy / f + 0.5; -} - -vec3 decode_normal (vec2 enc) -{ - vec2 fenc = enc*4-2; - float f = dot(fenc,fenc); - float g = sqrt(1-f/4); - vec3 n; - n.xy = fenc*g; - n.z = 1-f/2; - return n; -} +vec2 encode_normal(vec3 n); +vec3 decode_normal (vec2 enc); void main() { @@ -673,11 +380,18 @@ void main() vec3 col = vec3(0.0f,0.0f,0.0f); float bloom = 0.0; - calcAtmospherics(pos.xyz, 1.0); + vec3 sunlit; + vec3 amblit; + vec3 additive; + vec3 atten; + + calcFragAtmospherics(pos.xyz, 1.0, sunlit, amblit, additive, atten); vec3 refnormpersp = normalize(reflect(pos.xyz, norm.xyz)); - float da =dot(norm.xyz, sun_dir.xyz); + float da_sun =dot(norm.xyz, sun_dir.xyz); + float da_moon =dot(norm.xyz, moon_dir.xyz); + float da = max(da_sun, da_moon); float final_da = da; final_da = min(final_da, shadow); @@ -686,7 +400,7 @@ void main() final_da = min(final_da, 1.0f); final_da = pow(final_da, 1.0/1.3); - col.rgb = atmosAmbient(col); + col.rgb = atmosFragAmbient(col, amblit); float ambient = min(abs(da), 1.0); ambient *= 0.5; @@ -695,7 +409,7 @@ void main() col.rgb *= ambient; - col.rgb = col.rgb + atmosAffectDirectionalLight(final_da); + col.rgb = col.rgb + atmosFragAffectDirectionalLight(final_da, sunlit); col.rgb *= gamma_diff.rgb; @@ -707,8 +421,11 @@ void main() // the old infinite-sky shiny reflection // - float sa = dot(refnormpersp, sun_dir.xyz); - vec3 dumbshiny = vary_SunlitColor*shadow*(texture2D(lightFunc, vec2(sa, spec.a)).r); + float sa_sun = dot(refnormpersp, sun_dir.xyz); + float sa_moon = dot(refnormpersp, moon_dir.xyz); + float sa = max(sa_sun, sa_moon); + + vec3 dumbshiny = sunlit*shadow*(texture2D(lightFunc, vec2(sa, spec.a)).r); // add the two types of shiny together vec3 spec_contrib = dumbshiny * spec.rgb; @@ -742,8 +459,8 @@ void main() //col = mix(atmosLighting(col), fullbrightAtmosTransport(col), diffuse.a); //col = mix(scaleSoftClip(col), fullbrightScaleSoftClip(col), diffuse.a); - col = atmosLighting(col); - col = scaleSoftClip(col); + col = atmosFragLighting(col, additive, atten); + col = scaleFragSoftClip(col); //convert to linear space before adding local lights col = srgb_to_linear(col); @@ -771,7 +488,7 @@ void main() col.rgb = linear_to_srgb(col.rgb); #ifdef WATER_FOG - vec4 temp = applyWaterFogDeferred(pos, vec4(col.rgb, al)); + vec4 temp = applyWaterFogView(pos, vec4(col.rgb, al)); col.rgb = temp.rgb; al = temp.a; #endif |