1 files changed, 8 insertions, 234 deletions
diff --git a/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl b/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl
index b26194f278..70ae615d46 100644
--- a/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl
+++ b/indra/newview/app_settings/shaders/class1/deferred/materialF.glsl
@@ -27,37 +27,14 @@
 
 //class1/deferred/materialF.glsl
 
-// This shader is used for both writing opaque/masked content to the gbuffer and writing blended content to the framebuffer during the alpha pass.
+// Debug stub for non-pbr material
 
-#define DIFFUSE_ALPHA_MODE_NONE     0
 #define DIFFUSE_ALPHA_MODE_BLEND    1
-#define DIFFUSE_ALPHA_MODE_MASK     2
-#define DIFFUSE_ALPHA_MODE_EMISSIVE 3
-
-uniform float emissive_brightness;  // fullbright flag, 1.0 == fullbright, 0.0 otherwise
-uniform int sun_up_factor;
-
-#ifdef WATER_FOG
-vec4 applyWaterFogView(vec3 pos, vec4 color);
-#endif
-
-vec3 atmosFragLighting(vec3 l, vec3 additive, vec3 atten);
-vec3 scaleSoftClipFrag(vec3 l);
-
-vec3 fullbrightAtmosTransportFrag(vec3 light, vec3 additive, vec3 atten);
-vec3 fullbrightScaleSoftClip(vec3 light);
-
-void calcAtmosphericVars(vec3 inPositionEye, vec3 light_dir, float ambFactor, out vec3 sunlit, out vec3 amblit, out vec3 additive, out vec3 atten, bool use_ao);
-
-vec3 srgb_to_linear(vec3 cs);
-vec3 linear_to_srgb(vec3 cs);
 
 #if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_BLEND)
-
-#ifdef DEFINE_GL_FRAGCOLOR
 out vec4 frag_color;
 #else
-#define frag_color gl_FragColor
+out vec4 frag_data[4];
 #endif
 
 #ifdef HAS_SUN_SHADOW
@@ -239,216 +216,13 @@ void main()
 #endif
 
 #if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_BLEND)
-	vec3 gamma_diff = diffcol.rgb;
-	diffcol.rgb = srgb_to_linear(diffcol.rgb);
-#endif
-
-#ifdef HAS_SPECULAR_MAP
-    vec4 spec = texture2D(specularMap, vary_texcoord2.xy);
-    spec.rgb *= specular_color.rgb;
-#else
-    vec4 spec = vec4(specular_color.rgb, 1.0);
-#endif
-
-#ifdef HAS_NORMAL_MAP
-	vec4 norm = texture2D(bumpMap, vary_texcoord1.xy);
-
-	norm.xyz = norm.xyz * 2 - 1;
-
-	vec3 tnorm = vec3(dot(norm.xyz,vary_mat0),
-			  dot(norm.xyz,vary_mat1),
-			  dot(norm.xyz,vary_mat2));
-#else
-	vec4 norm = vec4(0,0,0,1.0);
-	vec3 tnorm = vary_normal;
-#endif
-
-    norm.xyz = normalize(tnorm.xyz);
-
-    vec2 abnormal = encode_normal(norm.xyz);
-
-    vec4 final_color = diffcol;
-
-#if (DIFFUSE_ALPHA_MODE != DIFFUSE_ALPHA_MODE_EMISSIVE)
-	final_color.a = emissive_brightness;
+    frag_color = vec4(1,0,0,0.5);
 #else
-	final_color.a = max(final_color.a, emissive_brightness);
-#endif
-
-    vec4 final_specular = spec;
-    
-#ifdef HAS_SPECULAR_MAP
-    vec4 final_normal = vec4(encode_normal(normalize(tnorm)), env_intensity * spec.a, 0.0);
-	final_specular.a = specular_color.a * norm.a;
-#else
-	vec4 final_normal = vec4(encode_normal(normalize(tnorm)), env_intensity, 0.0);
-	final_specular.a = specular_color.a;
-#endif
-
-#if (DIFFUSE_ALPHA_MODE == DIFFUSE_ALPHA_MODE_BLEND)
-
-    //forward rendering, output just lit sRGBA
-    vec3 pos = vary_position;
-
-    float shadow = 1.0f;
-
-#ifdef HAS_SUN_SHADOW
-    shadow = sampleDirectionalShadow(pos.xyz, norm.xyz, pos_screen);
-#endif
-
-    spec = final_specular;
-    vec4 diffuse = final_color;
-    float envIntensity = final_normal.z;
-
-    vec3 color = vec3(0,0,0);
-
-    vec3 light_dir = (sun_up_factor == 1) ? sun_dir : moon_dir;
-
-    float bloom = 0.0;
-    vec3 sunlit;
-    vec3 amblit;
-    vec3 additive;
-    vec3 atten;
-
-    calcAtmosphericVars(pos.xyz, light_dir, 1.0, sunlit, amblit, additive, atten, false);
-    
-        // This call breaks the Mac GLSL compiler/linker for unknown reasons (17Mar2020)
-        // The call is either a no-op or a pure (pow) gamma adjustment, depending on GPU level
-        // TODO: determine if we want to re-apply the gamma adjustment, and if so understand & fix Mac breakage
-        //color = fullbrightScaleSoftClip(color);
-
-    vec3 refnormpersp = normalize(reflect(pos.xyz, norm.xyz));
-
-    //we're in sRGB space, so gamma correct this dot product so 
-    // lighting from the sun stays sharp
-    float da = clamp(dot(normalize(norm.xyz), light_dir.xyz), 0.0, 1.0);
-    da = pow(da, 1.0 / 1.3);
-
-    color = amblit;
-
-    //darken ambient for normals perpendicular to light vector so surfaces in shadow 
-    // and facing away from light still have some definition to them.
-    // do NOT gamma correct this dot product so ambient lighting stays soft
-    float ambient = min(abs(dot(norm.xyz, sun_dir.xyz)), 1.0);
-    ambient *= 0.5;
-    ambient *= ambient;
-    ambient = (1.0 - ambient);
-
-    vec3 sun_contrib = min(da, shadow) * sunlit;
-    
-    color *= ambient;
-
-    color += sun_contrib;
-
-    color *= gamma_diff.rgb;
-
-    float glare = 0.0;
-
-    if (spec.a > 0.0)  // specular reflection
-    {
-        /*  // Reverting this specular calculation to previous 'dumbshiny' version - DJH 6/17/2020
-            // Preserving the refactored version as a comment for potential reconsideration,
-            // overriding the general rule to avoid pollutiong the source with commented code.
-            //
-            //  If you're reading this in 2021+, feel free to obliterate.
-
-        vec3 npos = -normalize(pos.xyz);
-
-        //vec3 ref = dot(pos+lv, norm);
-        vec3 h = normalize(light_dir.xyz + npos);
-        float nh = dot(norm.xyz, h);
-        float nv = dot(norm.xyz, npos);
-        float vh = dot(npos, h);
-        float sa = nh;
-        float fres = pow(1 - dot(h, npos), 5)*0.4 + 0.5;
-
-        float gtdenom = 2 * nh;
-        float gt = max(0, min(gtdenom * nv / vh, gtdenom * da / vh));
-
-        if (nh > 0.0)
-        {
-            float scol = fres*texture2D(lightFunc, vec2(nh, spec.a)).r*gt / (nh*da);
-            vec3 sp = sun_contrib*scol / 6.0f;
-            sp = clamp(sp, vec3(0), vec3(1));
-            bloom = dot(sp, sp) / 4.0;
-            color += sp * spec.rgb;
-        }
-        */
-
-        float sa        = dot(refnormpersp, sun_dir.xyz);
-        vec3  dumbshiny = sunlit * shadow * (texture2D(lightFunc, vec2(sa, spec.a)).r);
-
-        // add the two types of shiny together
-        vec3 spec_contrib = dumbshiny * spec.rgb;
-        bloom             = dot(spec_contrib, spec_contrib) / 6;
-
-        glare = max(spec_contrib.r, spec_contrib.g);
-        glare = max(glare, spec_contrib.b);
-
-        color += spec_contrib;
-    }
-
-    color = mix(color.rgb, diffcol.rgb, diffuse.a);
-
-    if (envIntensity > 0.0)
-    {
-        //add environmentmap
-        vec3 env_vec = env_mat * refnormpersp;
-
-        vec3 reflected_color = textureCube(environmentMap, env_vec).rgb;
-
-        color = mix(color, reflected_color, envIntensity);
-
-        float cur_glare = max(reflected_color.r, reflected_color.g);
-        cur_glare = max(cur_glare, reflected_color.b);
-        cur_glare *= envIntensity*4.0;
-        glare += cur_glare;
-    }
-
-    color = atmosFragLighting(color, additive, atten);
-    color = scaleSoftClipFrag(color);
-
-    //convert to linear before adding local lights
-    color = srgb_to_linear(color);
-
-    vec3 npos = normalize(-pos.xyz);
-
-    vec3 light = vec3(0, 0, 0);
-    
-    final_specular.rgb = srgb_to_linear(final_specular.rgb); // SL-14035
-
-#define LIGHT_LOOP(i) light.rgb += calcPointLightOrSpotLight(light_diffuse[i].rgb, npos, diffuse.rgb, final_specular, pos.xyz, norm.xyz, light_position[i], light_direction[i].xyz, light_attenuation[i].x, light_attenuation[i].y, light_attenuation[i].z, glare, light_attenuation[i].w );
-
-    LIGHT_LOOP(1)
-        LIGHT_LOOP(2)
-        LIGHT_LOOP(3)
-        LIGHT_LOOP(4)
-        LIGHT_LOOP(5)
-        LIGHT_LOOP(6)
-        LIGHT_LOOP(7)
-
-    color += light;
-
-    glare = min(glare, 1.0);
-    float al = max(diffcol.a, glare)*vertex_color.a;
-
-    //convert to srgb as this color is being written post gamma correction
-    color = linear_to_srgb(color);
-
-#ifdef WATER_FOG
-    vec4 temp = applyWaterFogView(pos, vec4(color, al));
-    color = temp.rgb;
-    al = temp.a;
-#endif
-
-    frag_color = vec4(color, al);
-
-#else // mode is not DIFFUSE_ALPHA_MODE_BLEND, encode to gbuffer 
-
-    // deferred path
-    frag_data[0] = final_color; //gbuffer is sRGB
-    frag_data[1] = final_specular; // XYZ = Specular color. W = Specular exponent.
-    frag_data[2] = final_normal; // XY = Normal.  Z = Env. intensity.
+    // emissive red PBR material
+    frag_data[0] = vec4(0,0,0,0);
+    frag_data[1] = vec4(0,0,0,0);
+    frag_data[2] = vec4(1,0,0,GBUFFER_FLAG_HAS_PBR);
+    frag_data[3] = vec4(1,0,0,0);
 #endif
 }