Merge branch 'DRTVWR-533' into DRTVWR-516-maint

3 files changed, 148 insertions, 5 deletions

diff --git a/indra/newview/app_settings/settings.xml b/indra/newview/app_settings/settings.xml
index 87bf9e5083..a3f54def1c 100644
--- a/indra/newview/app_settings/settings.xml
+++ b/indra/newview/app_settings/settings.xml
@@ -14412,7 +14412,53 @@
       <key>Value</key>
       <integer>44125</integer>
     </map>
-    <key>VoiceCallsFriendsOnly</key>
+
+  <key>VivoxVadAuto</key>
+  <map>
+    <key>Comment</key>
+    <string>A flag indicating if the automatic VAD is enabled (1) or disabled (0). The individual settings are ignored if the auto-mode is enabled</string>
+    <key>Persist</key>
+    <integer>1</integer>
+    <key>Type</key>
+    <string>U32</string>
+    <key>Value</key>
+    <integer>0</integer>
+  </map>
+  <key>VivoxVadHangover</key>
+  <map>
+    <key>Comment</key>
+    <string>The time (in milliseconds) that it takes or the VAD to switch back to silence from speech mode after the last speech frame has been detected</string>
+    <key>Persist</key>
+    <integer>1</integer>
+    <key>Type</key>
+    <string>U32</string>
+    <key>Value</key>
+    <integer>2000</integer>
+  </map>
+  <key>VivoxVadNoiseFloor</key>
+  <map>
+    <key>Comment</key>
+    <string>A dimensionless value between 0 and 20000 (default 576) that controls the maximum level at which the noise floor may be set at by the VAD's noise tracking</string>
+    <key>Persist</key>
+    <integer>1</integer>
+    <key>Type</key>
+    <string>U32</string>
+    <key>Value</key>
+    <integer>576</integer>
+  </map>
+  <key>VivoxVadSensitivity</key>
+  <map>
+    <key>Comment</key>
+    <string>
+      A dimensionless value between 0 and 100, indicating the 'sensitivity of the VAD'. Increasing this value corresponds to decreasing the sensitivity of the VAD and 0 is turned off altogether</string>
+    <key>Persist</key>
+    <integer>1</integer>
+    <key>Type</key>
+    <string>U32</string>
+    <key>Value</key>
+    <integer>0</integer>
+  </map>
+  <key>VoiceCallsFriendsOnly</key>
     <map>
       <key>Comment</key>
       <string>(Deprecated) Only accept voice calls from residents on your friends list</string>
diff --git a/indra/newview/llvoicevivox.cpp b/indra/newview/llvoicevivox.cpp
index f9ffefd4a2..0503ba3f94 100644
--- a/indra/newview/llvoicevivox.cpp
+++ b/indra/newview/llvoicevivox.cpp
@@ -652,7 +652,6 @@ void LLVivoxVoiceClient::idle(void* user_data)
 {
 }
 
-
 //=========================================================================
 // the following are methods to support the coroutine implementation of the 
 // voice connection and processing.  They should only be called in the context 
@@ -684,7 +683,22 @@ void LLVivoxVoiceClient::voiceControlCoro()
         bool success = startAndConnectSession();
         if (success)
         {
-            if (mTuningMode)
+			// enable/disable the automatic VAD and explicitly set the initial values of 
+			// the VAD variables ourselves when it is off - see SL-15072 for more details
+			// note: we set the other parameters too even if the auto VAD is on which is ok
+			unsigned int vad_auto = gSavedSettings.getU32("VivoxVadAuto");
+			unsigned int vad_hangover = gSavedSettings.getU32("VivoxVadHangover");
+			unsigned int vad_noise_floor = gSavedSettings.getU32("VivoxVadNoiseFloor");
+			unsigned int vad_sensitivity = gSavedSettings.getU32("VivoxVadSensitivity");
+			setupVADParams(vad_auto, vad_hangover, vad_noise_floor, vad_sensitivity);
+			
+			// watch for changes to the VAD settings via Debug Settings UI and act on them accordingly
+			gSavedSettings.getControl("VivoxVadAuto")->getSignal()->connect(boost::bind(&LLVivoxVoiceClient::onVADSettingsChange, this));
+			gSavedSettings.getControl("VivoxVadHangover")->getSignal()->connect(boost::bind(&LLVivoxVoiceClient::onVADSettingsChange, this));
+			gSavedSettings.getControl("VivoxVadNoiseFloor")->getSignal()->connect(boost::bind(&LLVivoxVoiceClient::onVADSettingsChange, this));
+			gSavedSettings.getControl("VivoxVadSensitivity")->getSignal()->connect(boost::bind(&LLVivoxVoiceClient::onVADSettingsChange, this));
+
+			if (mTuningMode)
             {
                 performMicTuning();
             }
@@ -731,7 +745,6 @@ void LLVivoxVoiceClient::voiceControlCoro()
     LL_INFOS("Voice") << "exiting" << LL_ENDL;
 }
 
-
 bool LLVivoxVoiceClient::startAndConnectSession()
 {
     bool ok = false;
@@ -3230,6 +3243,73 @@ void LLVivoxVoiceClient::sendLocalAudioUpdates()
 	}
 }
 
+/**
+ * Because of the recurring voice cutout issues (SL-15072) we are going to try
+ * to disable the automatic VAD (Voice Activity Detection) and set the associated
+ * parameters directly. We will expose them via Debug Settings and that should
+ * let us iterate on a collection of values that work for us. Hopefully! 
+ *
+ * From the VIVOX Docs:
+ *
+ * VadAuto: A flag indicating if the automatic VAD is enabled (1) or disabled (0)
+ *
+ * VadHangover: The time (in milliseconds) that it takes
+ * for the VAD to switch back to silence from speech mode after the last speech
+ * frame has been detected.
+ *
+ * VadNoiseFloor: A dimensionless value between 0 and 
+ * 20000 (default 576) that controls the maximum level at which the noise floor
+ * may be set at by the VAD's noise tracking. Too low of a value will make noise
+ * tracking ineffective (A value of 0 disables noise tracking and the VAD then 
+ * relies purely on the sensitivity property). Too high of a value will make 
+ * long speech classifiable as noise.
+ *
+ * VadSensitivity: A dimensionless value between 0 and 
+ * 100, indicating the 'sensitivity of the VAD'. Increasing this value corresponds
+ * to decreasing the sensitivity of the VAD (i.e. '0' is most sensitive, 
+ * while 100 is 'least sensitive')
+ */
+void LLVivoxVoiceClient::setupVADParams(unsigned int vad_auto,
+                                        unsigned int vad_hangover,
+                                        unsigned int vad_noise_floor,
+                                        unsigned int vad_sensitivity)
+{
+    std::ostringstream stream;
+
+    LL_INFOS("Voice") << "Setting the automatic VAD to "
+        << (vad_auto ? "True" : "False")
+		<< " and discrete values to"
+		<< " VadHangover = " << vad_hangover
+		<< ", VadSensitivity = " << vad_sensitivity
+		<< ", VadNoiseFloor = " << vad_noise_floor
+        << LL_ENDL;
+
+	// Create a request to set the VAD parameters:
+	stream << "<Request requestId=\"" << mCommandCookie++ << "\" action=\"Aux.SetVadProperties.1\">"
+               << "<VadAuto>" << vad_auto << "</VadAuto>"
+               << "<VadHangover>" << vad_hangover << "</VadHangover>"
+               << "<VadSensitivity>" << vad_sensitivity << "</VadSensitivity>"
+               << "<VadNoiseFloor>" << vad_noise_floor << "</VadNoiseFloor>"
+           << "</Request>\n\n\n";
+
+    if (!stream.str().empty())
+    {
+        writeString(stream.str());
+    }
+}
+
+void LLVivoxVoiceClient::onVADSettingsChange()
+{
+	// pick up the VAD variables (one of which was changed)
+	unsigned int vad_auto = gSavedSettings.getU32("VivoxVadAuto");
+	unsigned int vad_hangover = gSavedSettings.getU32("VivoxVadHangover");
+	unsigned int vad_noise_floor = gSavedSettings.getU32("VivoxVadNoiseFloor");
+	unsigned int vad_sensitivity = gSavedSettings.getU32("VivoxVadSensitivity");
+
+	// build a VAD params change request and send it to SLVoice
+	setupVADParams(vad_auto, vad_hangover, vad_noise_floor, vad_sensitivity);
+}
+
 /////////////////////////////
 // Response/Event handlers
 
@@ -7582,6 +7662,18 @@ void LLVivoxProtocolParser::processResponse(std::string tag)
 		{
 			LLVivoxVoiceClient::getInstance()->accountGetTemplateFontsResponse(statusCode, statusString);
 		}
+		else if (!stricmp(actionCstr, "Aux.SetVadProperties.1"))
+		{
+			// both values of statusCode (old and more recent) indicate valid requests
+			if (statusCode != 0 && statusCode != 200)
+			{
+				LL_WARNS("Voice") << "Aux.SetVadProperties.1 request failed: "
+					<< "statusCode: " << statusCode
+					<< " and "
+					<< "statusString: " << statusString
+					<< LL_ENDL;
+			}
+		}
 		/*
 		 else if (!stricmp(actionCstr, "Account.ChannelGetList.1"))
 		 {
diff --git a/indra/newview/llvoicevivox.h b/indra/newview/llvoicevivox.h
index 699c85066b..75ff5429f3 100644
--- a/indra/newview/llvoicevivox.h
+++ b/indra/newview/llvoicevivox.h
@@ -446,7 +446,6 @@ protected:
 	// local audio updates, mic mute, speaker mute, mic volume and speaker volumes
 	void sendLocalAudioUpdates();
 
-
 	/////////////////////////////
 	// Response/Event handlers
 	void connectorCreateResponse(int statusCode, std::string &statusString, std::string &connectorHandle, std::string &versionID);
@@ -473,6 +472,12 @@ protected:
 	void muteListChanged();
 		
 	/////////////////////////////
+	// VAD changes
+	// disable auto-VAD and configure VAD parameters explicitly
+	void setupVADParams(unsigned int vad_auto, unsigned int vad_hangover, unsigned int vad_noise_floor, unsigned int vad_sensitivity);
+	void onVADSettingsChange();
+
+	/////////////////////////////
 	// Sending updates of current state
 	void updatePosition(void);
 	void setCameraPosition(const LLVector3d &position, const LLVector3 &velocity, const LLMatrix3 &rot);