#824 Process source files in bulk: replace tabs with spaces, convert CRLF to LF, and trim trailing whitespaces as needed

1 files changed, 844 insertions, 844 deletions

diff --git a/indra/llmath/llvolume.h b/indra/llmath/llvolume.h
index 71878b8cb6..917ad6030c 100644
--- a/indra/llmath/llvolume.h
+++ b/indra/llmath/llvolume.h
@@ -1,25 +1,25 @@
-/** 
+/**
  * @file llvolume.h
  * @brief LLVolume base class.
  *
  * $LicenseInfo:firstyear=2002&license=viewerlgpl$
  * Second Life Viewer Source Code
  * Copyright (C) 2010, Linden Research, Inc.
- * 
+ *
  * This library is free software; you can redistribute it and/or
  * modify it under the terms of the GNU Lesser General Public
  * License as published by the Free Software Foundation;
  * version 2.1 of the License only.
- * 
+ *
  * This library is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * Lesser General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU Lesser General Public
  * License along with this library; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- * 
+ *
  * Linden Research, Inc., 945 Battery Street, San Francisco, CA  94111  USA
  * $/LicenseInfo$
  */
@@ -69,8 +69,8 @@ const S32 MAX_LOD = 3;
 // These are defined here but are not enforced at this level,
 // rather they are here for the convenience of code that uses
 // the LLVolume class.
-const F32 MIN_VOLUME_PROFILE_WIDTH 	= 0.05f;
-const F32 MIN_VOLUME_PATH_WIDTH 	= 0.05f;
+const F32 MIN_VOLUME_PROFILE_WIDTH  = 0.05f;
+const F32 MIN_VOLUME_PATH_WIDTH     = 0.05f;
 
 const F32 CUT_QUANTA    = 0.00002f;
 const F32 SCALE_QUANTA  = 0.01f;
@@ -84,100 +84,100 @@ const S32 MAX_VOLUME_TRIANGLE_INDICES = 10000;
 //============================================================================
 
 // useful masks
-const LLPCode LL_PCODE_HOLLOW_MASK 	= 0x80;		// has a thickness
-const LLPCode LL_PCODE_SEGMENT_MASK = 0x40;		// segments (1 angle)
-const LLPCode LL_PCODE_PATCH_MASK 	= 0x20;		// segmented segments (2 angles)
-const LLPCode LL_PCODE_HEMI_MASK 	= 0x10;		// half-primitives get their own type per PR's dictum
-const LLPCode LL_PCODE_BASE_MASK 	= 0x0F;
-
-	// primitive shapes
-const LLPCode	LL_PCODE_CUBE 			= 1;
-const LLPCode	LL_PCODE_PRISM 			= 2;
-const LLPCode	LL_PCODE_TETRAHEDRON 	= 3;
-const LLPCode	LL_PCODE_PYRAMID 		= 4;
-const LLPCode	LL_PCODE_CYLINDER 		= 5;
-const LLPCode	LL_PCODE_CONE 			= 6;
-const LLPCode	LL_PCODE_SPHERE 		= 7;
-const LLPCode	LL_PCODE_TORUS 			= 8;
-const LLPCode	LL_PCODE_VOLUME			= 9;
-
-	// surfaces
-//const LLPCode	LL_PCODE_SURFACE_TRIANGLE 	= 10;
-//const LLPCode	LL_PCODE_SURFACE_SQUARE 	= 11;
-//const LLPCode	LL_PCODE_SURFACE_DISC 		= 12;
-
-const LLPCode	LL_PCODE_APP				= 14; // App specific pcode (for viewer/sim side only objects)
-const LLPCode	LL_PCODE_LEGACY				= 15;
+const LLPCode LL_PCODE_HOLLOW_MASK  = 0x80;     // has a thickness
+const LLPCode LL_PCODE_SEGMENT_MASK = 0x40;     // segments (1 angle)
+const LLPCode LL_PCODE_PATCH_MASK   = 0x20;     // segmented segments (2 angles)
+const LLPCode LL_PCODE_HEMI_MASK    = 0x10;     // half-primitives get their own type per PR's dictum
+const LLPCode LL_PCODE_BASE_MASK    = 0x0F;
+
+    // primitive shapes
+const LLPCode   LL_PCODE_CUBE           = 1;
+const LLPCode   LL_PCODE_PRISM          = 2;
+const LLPCode   LL_PCODE_TETRAHEDRON    = 3;
+const LLPCode   LL_PCODE_PYRAMID        = 4;
+const LLPCode   LL_PCODE_CYLINDER       = 5;
+const LLPCode   LL_PCODE_CONE           = 6;
+const LLPCode   LL_PCODE_SPHERE         = 7;
+const LLPCode   LL_PCODE_TORUS          = 8;
+const LLPCode   LL_PCODE_VOLUME         = 9;
+
+    // surfaces
+//const LLPCode LL_PCODE_SURFACE_TRIANGLE   = 10;
+//const LLPCode LL_PCODE_SURFACE_SQUARE     = 11;
+//const LLPCode LL_PCODE_SURFACE_DISC       = 12;
+
+const LLPCode   LL_PCODE_APP                = 14; // App specific pcode (for viewer/sim side only objects)
+const LLPCode   LL_PCODE_LEGACY             = 15;
 
 // Pcodes for legacy objects
-//const LLPCode	LL_PCODE_LEGACY_ATOR =				0x10 | LL_PCODE_LEGACY; // ATOR
-const LLPCode	LL_PCODE_LEGACY_AVATAR =			0x20 | LL_PCODE_LEGACY; // PLAYER
-//const LLPCode	LL_PCODE_LEGACY_BIRD =				0x30 | LL_PCODE_LEGACY; // BIRD
-//const LLPCode	LL_PCODE_LEGACY_DEMON =				0x40 | LL_PCODE_LEGACY; // DEMON
-const LLPCode	LL_PCODE_LEGACY_GRASS =				0x50 | LL_PCODE_LEGACY; // GRASS
-const LLPCode	LL_PCODE_TREE_NEW =					0x60 | LL_PCODE_LEGACY; // new trees
-//const LLPCode	LL_PCODE_LEGACY_ORACLE =			0x70 | LL_PCODE_LEGACY; // ORACLE
-const LLPCode	LL_PCODE_LEGACY_PART_SYS =			0x80 | LL_PCODE_LEGACY; // PART_SYS
-const LLPCode	LL_PCODE_LEGACY_ROCK =				0x90 | LL_PCODE_LEGACY; // ROCK
-//const LLPCode	LL_PCODE_LEGACY_SHOT =				0xA0 | LL_PCODE_LEGACY; // BASIC_SHOT
-//const LLPCode	LL_PCODE_LEGACY_SHOT_BIG =			0xB0 | LL_PCODE_LEGACY;
-//const LLPCode	LL_PCODE_LEGACY_SMOKE =				0xC0 | LL_PCODE_LEGACY; // SMOKE
-//const LLPCode	LL_PCODE_LEGACY_SPARK =				0xD0 | LL_PCODE_LEGACY;// SPARK
-const LLPCode	LL_PCODE_LEGACY_TEXT_BUBBLE =		0xE0 | LL_PCODE_LEGACY; // TEXTBUBBLE
-const LLPCode	LL_PCODE_LEGACY_TREE =				0xF0 | LL_PCODE_LEGACY; // TREE
-
-	// hemis
-const LLPCode	LL_PCODE_CYLINDER_HEMI =		LL_PCODE_CYLINDER	| LL_PCODE_HEMI_MASK;
-const LLPCode	LL_PCODE_CONE_HEMI =			LL_PCODE_CONE		| LL_PCODE_HEMI_MASK;
-const LLPCode	LL_PCODE_SPHERE_HEMI =			LL_PCODE_SPHERE		| LL_PCODE_HEMI_MASK;
-const LLPCode	LL_PCODE_TORUS_HEMI =			LL_PCODE_TORUS		| LL_PCODE_HEMI_MASK;
+//const LLPCode LL_PCODE_LEGACY_ATOR =              0x10 | LL_PCODE_LEGACY; // ATOR
+const LLPCode   LL_PCODE_LEGACY_AVATAR =            0x20 | LL_PCODE_LEGACY; // PLAYER
+//const LLPCode LL_PCODE_LEGACY_BIRD =              0x30 | LL_PCODE_LEGACY; // BIRD
+//const LLPCode LL_PCODE_LEGACY_DEMON =             0x40 | LL_PCODE_LEGACY; // DEMON
+const LLPCode   LL_PCODE_LEGACY_GRASS =             0x50 | LL_PCODE_LEGACY; // GRASS
+const LLPCode   LL_PCODE_TREE_NEW =                 0x60 | LL_PCODE_LEGACY; // new trees
+//const LLPCode LL_PCODE_LEGACY_ORACLE =            0x70 | LL_PCODE_LEGACY; // ORACLE
+const LLPCode   LL_PCODE_LEGACY_PART_SYS =          0x80 | LL_PCODE_LEGACY; // PART_SYS
+const LLPCode   LL_PCODE_LEGACY_ROCK =              0x90 | LL_PCODE_LEGACY; // ROCK
+//const LLPCode LL_PCODE_LEGACY_SHOT =              0xA0 | LL_PCODE_LEGACY; // BASIC_SHOT
+//const LLPCode LL_PCODE_LEGACY_SHOT_BIG =          0xB0 | LL_PCODE_LEGACY;
+//const LLPCode LL_PCODE_LEGACY_SMOKE =             0xC0 | LL_PCODE_LEGACY; // SMOKE
+//const LLPCode LL_PCODE_LEGACY_SPARK =             0xD0 | LL_PCODE_LEGACY;// SPARK
+const LLPCode   LL_PCODE_LEGACY_TEXT_BUBBLE =       0xE0 | LL_PCODE_LEGACY; // TEXTBUBBLE
+const LLPCode   LL_PCODE_LEGACY_TREE =              0xF0 | LL_PCODE_LEGACY; // TREE
+
+    // hemis
+const LLPCode   LL_PCODE_CYLINDER_HEMI =        LL_PCODE_CYLINDER   | LL_PCODE_HEMI_MASK;
+const LLPCode   LL_PCODE_CONE_HEMI =            LL_PCODE_CONE       | LL_PCODE_HEMI_MASK;
+const LLPCode   LL_PCODE_SPHERE_HEMI =          LL_PCODE_SPHERE     | LL_PCODE_HEMI_MASK;
+const LLPCode   LL_PCODE_TORUS_HEMI =           LL_PCODE_TORUS      | LL_PCODE_HEMI_MASK;
 
 
 // Volumes consist of a profile at the base that is swept around
 // a path to make a volume.
 // The profile code
-const U8	LL_PCODE_PROFILE_MASK		= 0x0f;
-const U8	LL_PCODE_PROFILE_MIN		= 0x00;
-const U8    LL_PCODE_PROFILE_CIRCLE		= 0x00;
-const U8    LL_PCODE_PROFILE_SQUARE		= 0x01;
-const U8	LL_PCODE_PROFILE_ISOTRI		= 0x02;
-const U8    LL_PCODE_PROFILE_EQUALTRI	= 0x03;
-const U8    LL_PCODE_PROFILE_RIGHTTRI	= 0x04;
-const U8	LL_PCODE_PROFILE_CIRCLE_HALF = 0x05;
-const U8	LL_PCODE_PROFILE_MAX		= 0x05;
+const U8    LL_PCODE_PROFILE_MASK       = 0x0f;
+const U8    LL_PCODE_PROFILE_MIN        = 0x00;
+const U8    LL_PCODE_PROFILE_CIRCLE     = 0x00;
+const U8    LL_PCODE_PROFILE_SQUARE     = 0x01;
+const U8    LL_PCODE_PROFILE_ISOTRI     = 0x02;
+const U8    LL_PCODE_PROFILE_EQUALTRI   = 0x03;
+const U8    LL_PCODE_PROFILE_RIGHTTRI   = 0x04;
+const U8    LL_PCODE_PROFILE_CIRCLE_HALF = 0x05;
+const U8    LL_PCODE_PROFILE_MAX        = 0x05;
 
 // Stored in the profile byte
-const U8	LL_PCODE_HOLE_MASK		= 0xf0;
-const U8	LL_PCODE_HOLE_MIN		= 0x00;	  
-const U8	LL_PCODE_HOLE_SAME		= 0x00;		// same as outside profile
-const U8	LL_PCODE_HOLE_CIRCLE	= 0x10;
-const U8	LL_PCODE_HOLE_SQUARE	= 0x20;
-const U8	LL_PCODE_HOLE_TRIANGLE	= 0x30;
-const U8	LL_PCODE_HOLE_MAX		= 0x03;		// min/max needs to be >> 4 of real min/max
+const U8    LL_PCODE_HOLE_MASK      = 0xf0;
+const U8    LL_PCODE_HOLE_MIN       = 0x00;
+const U8    LL_PCODE_HOLE_SAME      = 0x00;     // same as outside profile
+const U8    LL_PCODE_HOLE_CIRCLE    = 0x10;
+const U8    LL_PCODE_HOLE_SQUARE    = 0x20;
+const U8    LL_PCODE_HOLE_TRIANGLE  = 0x30;
+const U8    LL_PCODE_HOLE_MAX       = 0x03;     // min/max needs to be >> 4 of real min/max
 
 const U8    LL_PCODE_PATH_IGNORE    = 0x00;
-const U8	LL_PCODE_PATH_MIN		= 0x01;		// min/max needs to be >> 4 of real min/max
+const U8    LL_PCODE_PATH_MIN       = 0x01;     // min/max needs to be >> 4 of real min/max
 const U8    LL_PCODE_PATH_LINE      = 0x10;
 const U8    LL_PCODE_PATH_CIRCLE    = 0x20;
 const U8    LL_PCODE_PATH_CIRCLE2   = 0x30;
 const U8    LL_PCODE_PATH_TEST      = 0x40;
 const U8    LL_PCODE_PATH_FLEXIBLE  = 0x80;
-const U8	LL_PCODE_PATH_MAX		= 0x08;
+const U8    LL_PCODE_PATH_MAX       = 0x08;
 
 //============================================================================
 
 // face identifiers
 typedef U16 LLFaceID;
 
-const LLFaceID	LL_FACE_PATH_BEGIN		= 0x1 << 0;
-const LLFaceID	LL_FACE_PATH_END		= 0x1 << 1;
-const LLFaceID	LL_FACE_INNER_SIDE		= 0x1 << 2;
-const LLFaceID	LL_FACE_PROFILE_BEGIN	= 0x1 << 3;
-const LLFaceID	LL_FACE_PROFILE_END		= 0x1 << 4;
-const LLFaceID	LL_FACE_OUTER_SIDE_0	= 0x1 << 5;
-const LLFaceID	LL_FACE_OUTER_SIDE_1	= 0x1 << 6;
-const LLFaceID	LL_FACE_OUTER_SIDE_2	= 0x1 << 7;
-const LLFaceID	LL_FACE_OUTER_SIDE_3	= 0x1 << 8;
+const LLFaceID  LL_FACE_PATH_BEGIN      = 0x1 << 0;
+const LLFaceID  LL_FACE_PATH_END        = 0x1 << 1;
+const LLFaceID  LL_FACE_INNER_SIDE      = 0x1 << 2;
+const LLFaceID  LL_FACE_PROFILE_BEGIN   = 0x1 << 3;
+const LLFaceID  LL_FACE_PROFILE_END     = 0x1 << 4;
+const LLFaceID  LL_FACE_OUTER_SIDE_0    = 0x1 << 5;
+const LLFaceID  LL_FACE_OUTER_SIDE_1    = 0x1 << 6;
+const LLFaceID  LL_FACE_OUTER_SIDE_2    = 0x1 << 7;
+const LLFaceID  LL_FACE_OUTER_SIDE_3    = 0x1 << 8;
 
 //============================================================================
 
@@ -190,7 +190,7 @@ const U8 LL_SCULPT_TYPE_PLANE     = 3;
 const U8 LL_SCULPT_TYPE_CYLINDER  = 4;
 const U8 LL_SCULPT_TYPE_MESH      = 5;
 const U8 LL_SCULPT_TYPE_MASK      = LL_SCULPT_TYPE_SPHERE | LL_SCULPT_TYPE_TORUS | LL_SCULPT_TYPE_PLANE |
-	LL_SCULPT_TYPE_CYLINDER | LL_SCULPT_TYPE_MESH;
+    LL_SCULPT_TYPE_CYLINDER | LL_SCULPT_TYPE_MESH;
 
 // for value checks, assign new value after adding new types
 const U8 LL_SCULPT_TYPE_MAX = LL_SCULPT_TYPE_MESH;
@@ -206,125 +206,125 @@ extern BOOL gDebugGL;
 class LLProfileParams
 {
 public:
-	LLProfileParams()
-		: mCurveType(LL_PCODE_PROFILE_SQUARE),
-		  mBegin(0.f),
-		  mEnd(1.f),
-		  mHollow(0.f),
-		  mCRC(0)
-	{
-	}
-
-	LLProfileParams(U8 curve, F32 begin, F32 end, F32 hollow)
-		: mCurveType(curve),
-		  mBegin(begin),
-		  mEnd(end),
-		  mHollow(hollow),
-		  mCRC(0)
-	{
-	}
-
-	LLProfileParams(U8 curve, U16 begin, U16 end, U16 hollow)
-	{
-		mCurveType = curve;
-		F32 temp_f32 = begin * CUT_QUANTA;
-		if (temp_f32 > 1.f)
-		{
-			temp_f32 = 1.f;
-		}
-		mBegin = temp_f32;
-		temp_f32 = end * CUT_QUANTA;
-		if (temp_f32 > 1.f)
-		{
-			temp_f32 = 1.f;
-		}
-		mEnd = 1.f - temp_f32;
-		temp_f32 = hollow * HOLLOW_QUANTA;
-		if (temp_f32 > 1.f)
-		{
-			temp_f32 = 1.f;
-		}
-		mHollow = temp_f32;
-		mCRC = 0;
-	}
-
-	bool operator==(const LLProfileParams &params) const;
-	bool operator!=(const LLProfileParams &params) const;
-	bool operator<(const LLProfileParams &params) const;
-	
-	void copyParams(const LLProfileParams &params);
-
-	BOOL importFile(LLFILE *fp);
-	BOOL exportFile(LLFILE *fp) const;
-
-	BOOL importLegacyStream(std::istream& input_stream);
-	BOOL exportLegacyStream(std::ostream& output_stream) const;
-
-	LLSD asLLSD() const;
-	operator LLSD() const { return asLLSD(); }
-	bool fromLLSD(LLSD& sd);
-
-	const F32&  getBegin () const				{ return mBegin; }
-	const F32&  getEnd   () const				{ return mEnd;   }
-	const F32&  getHollow() const				{ return mHollow; }
-	const U8&   getCurveType () const			{ return mCurveType; }
-
-	void setCurveType(const U32 type)			{ mCurveType = type;}
-	void setBegin(const F32 begin)				{ mBegin = (begin >= 1.0f) ? 0.0f : ((int) (begin * 100000))/100000.0f;}
-	void setEnd(const F32 end)					{ mEnd   = (end   <= 0.0f) ? 1.0f : ((int) (end * 100000))/100000.0f;}
-	void setHollow(const F32 hollow)			{ mHollow = ((int) (hollow * 100000))/100000.0f;}
-
-	friend std::ostream& operator<<(std::ostream &s, const LLProfileParams &profile_params);
+    LLProfileParams()
+        : mCurveType(LL_PCODE_PROFILE_SQUARE),
+          mBegin(0.f),
+          mEnd(1.f),
+          mHollow(0.f),
+          mCRC(0)
+    {
+    }
+
+    LLProfileParams(U8 curve, F32 begin, F32 end, F32 hollow)
+        : mCurveType(curve),
+          mBegin(begin),
+          mEnd(end),
+          mHollow(hollow),
+          mCRC(0)
+    {
+    }
+
+    LLProfileParams(U8 curve, U16 begin, U16 end, U16 hollow)
+    {
+        mCurveType = curve;
+        F32 temp_f32 = begin * CUT_QUANTA;
+        if (temp_f32 > 1.f)
+        {
+            temp_f32 = 1.f;
+        }
+        mBegin = temp_f32;
+        temp_f32 = end * CUT_QUANTA;
+        if (temp_f32 > 1.f)
+        {
+            temp_f32 = 1.f;
+        }
+        mEnd = 1.f - temp_f32;
+        temp_f32 = hollow * HOLLOW_QUANTA;
+        if (temp_f32 > 1.f)
+        {
+            temp_f32 = 1.f;
+        }
+        mHollow = temp_f32;
+        mCRC = 0;
+    }
+
+    bool operator==(const LLProfileParams &params) const;
+    bool operator!=(const LLProfileParams &params) const;
+    bool operator<(const LLProfileParams &params) const;
+
+    void copyParams(const LLProfileParams &params);
+
+    BOOL importFile(LLFILE *fp);
+    BOOL exportFile(LLFILE *fp) const;
+
+    BOOL importLegacyStream(std::istream& input_stream);
+    BOOL exportLegacyStream(std::ostream& output_stream) const;
+
+    LLSD asLLSD() const;
+    operator LLSD() const { return asLLSD(); }
+    bool fromLLSD(LLSD& sd);
+
+    const F32&  getBegin () const               { return mBegin; }
+    const F32&  getEnd   () const               { return mEnd;   }
+    const F32&  getHollow() const               { return mHollow; }
+    const U8&   getCurveType () const           { return mCurveType; }
+
+    void setCurveType(const U32 type)           { mCurveType = type;}
+    void setBegin(const F32 begin)              { mBegin = (begin >= 1.0f) ? 0.0f : ((int) (begin * 100000))/100000.0f;}
+    void setEnd(const F32 end)                  { mEnd   = (end   <= 0.0f) ? 1.0f : ((int) (end * 100000))/100000.0f;}
+    void setHollow(const F32 hollow)            { mHollow = ((int) (hollow * 100000))/100000.0f;}
+
+    friend std::ostream& operator<<(std::ostream &s, const LLProfileParams &profile_params);
 
 protected:
-	// Profile params
-	U8			  mCurveType;
-	F32           mBegin;
-	F32           mEnd;
-	F32			  mHollow;
+    // Profile params
+    U8            mCurveType;
+    F32           mBegin;
+    F32           mEnd;
+    F32           mHollow;
 
-	U32           mCRC;
+    U32           mCRC;
 };
 
 inline bool LLProfileParams::operator==(const LLProfileParams &params) const
 {
-	return 
-		(getCurveType() == params.getCurveType()) &&
-		(getBegin() == params.getBegin()) &&
-		(getEnd() == params.getEnd()) &&
-		(getHollow() == params.getHollow());
+    return
+        (getCurveType() == params.getCurveType()) &&
+        (getBegin() == params.getBegin()) &&
+        (getEnd() == params.getEnd()) &&
+        (getHollow() == params.getHollow());
 }
 
 inline bool LLProfileParams::operator!=(const LLProfileParams &params) const
 {
-	return 
-		(getCurveType() != params.getCurveType()) ||
-		(getBegin() != params.getBegin()) ||
-		(getEnd() != params.getEnd()) ||
-		(getHollow() != params.getHollow());
+    return
+        (getCurveType() != params.getCurveType()) ||
+        (getBegin() != params.getBegin()) ||
+        (getEnd() != params.getEnd()) ||
+        (getHollow() != params.getHollow());
 }
 
 
 inline bool LLProfileParams::operator<(const LLProfileParams &params) const
 {
-	if (getCurveType() != params.getCurveType())
-	{
-		return getCurveType() < params.getCurveType();
-	}
-	else
-	if (getBegin() != params.getBegin())
-	{
-		return getBegin() < params.getBegin();
-	}
-	else
-	if (getEnd() != params.getEnd())
-	{
-		return getEnd() < params.getEnd();
-	}
-	else
-	{
-		return getHollow() < params.getHollow();
-	}
+    if (getCurveType() != params.getCurveType())
+    {
+        return getCurveType() < params.getCurveType();
+    }
+    else
+    if (getBegin() != params.getBegin())
+    {
+        return getBegin() < params.getBegin();
+    }
+    else
+    if (getEnd() != params.getEnd())
+    {
+        return getEnd() < params.getEnd();
+    }
+    else
+    {
+        return getHollow() < params.getHollow();
+    }
 }
 
 #define U8_TO_F32(x) (F32)(*((S8 *)&x))
@@ -332,225 +332,225 @@ inline bool LLProfileParams::operator<(const LLProfileParams &params) const
 class LLPathParams
 {
 public:
-	LLPathParams()
-		:
-		mCurveType(LL_PCODE_PATH_LINE),
-		mBegin(0.f),
-		mEnd(1.f),
-		mScale(1.f,1.f),
-		mShear(0.f,0.f),
-		mTwistBegin(0.f),
-		mTwistEnd(0.f),
-		mRadiusOffset(0.f),
-		mTaper(0.f,0.f),
-		mRevolutions(1.f),
-		mSkew(0.f),
-		mCRC(0)
-	{
-	}
-
-	LLPathParams(U8 curve, F32 begin, F32 end, F32 scx, F32 scy, F32 shx, F32 shy, F32 twistend, F32 twistbegin, F32 radiusoffset, F32 tx, F32 ty, F32 revolutions, F32 skew)
-		: mCurveType(curve),
-		  mBegin(begin),
-		  mEnd(end),
-		  mScale(scx,scy),
-		  mShear(shx,shy),
-		  mTwistBegin(twistbegin),
-		  mTwistEnd(twistend), 
-		  mRadiusOffset(radiusoffset),
-		  mTaper(tx,ty),
-		  mRevolutions(revolutions),
-		  mSkew(skew),
-		  mCRC(0)
-	{
-	}
-
-	LLPathParams(U8 curve, U16 begin, U16 end, U8 scx, U8 scy, U8 shx, U8 shy, U8 twistend, U8 twistbegin, U8 radiusoffset, U8 tx, U8 ty, U8 revolutions, U8 skew)
-	{
-		mCurveType = curve;
-		mBegin = (F32)(begin * CUT_QUANTA);
-		mEnd = (F32)(100.f - end) * CUT_QUANTA;
-		if (mEnd > 1.f)
-			mEnd = 1.f;
-		mScale.setVec((F32) (200 - scx) * SCALE_QUANTA,(F32) (200 - scy) * SCALE_QUANTA);
-		mShear.setVec(U8_TO_F32(shx) * SHEAR_QUANTA,U8_TO_F32(shy) * SHEAR_QUANTA);
-		mTwistBegin = U8_TO_F32(twistbegin) * SCALE_QUANTA;
-		mTwistEnd = U8_TO_F32(twistend) * SCALE_QUANTA;
-		mRadiusOffset = U8_TO_F32(radiusoffset) * SCALE_QUANTA;
-		mTaper.setVec(U8_TO_F32(tx) * TAPER_QUANTA,U8_TO_F32(ty) * TAPER_QUANTA);
-		mRevolutions = ((F32)revolutions) * REV_QUANTA + 1.0f;
-		mSkew = U8_TO_F32(skew) * SCALE_QUANTA;
-
-		mCRC = 0;
-	}
-
-	bool operator==(const LLPathParams &params) const;
-	bool operator!=(const LLPathParams &params) const;
-	bool operator<(const LLPathParams &params) const;
-
-	void copyParams(const LLPathParams &params);
-
-	BOOL importFile(LLFILE *fp);
-	BOOL exportFile(LLFILE *fp) const;
-
-	BOOL importLegacyStream(std::istream& input_stream);
-	BOOL exportLegacyStream(std::ostream& output_stream) const;
-
-	LLSD asLLSD() const;
-	operator LLSD() const { return asLLSD(); }
-	bool fromLLSD(LLSD& sd);
-
-	const F32& getBegin() const			{ return mBegin; }
-	const F32& getEnd() const			{ return mEnd; }
-	const LLVector2 &getScale() const	{ return mScale; }
-	const F32& getScaleX() const		{ return mScale.mV[0]; }
-	const F32& getScaleY() const		{ return mScale.mV[1]; }
-	const LLVector2 getBeginScale() const;
-	const LLVector2 getEndScale() const;
-	const LLVector2 &getShear() const	{ return mShear; }
-	const F32& getShearX() const		{ return mShear.mV[0]; }
-	const F32& getShearY() const		{ return mShear.mV[1]; }
-	const U8& getCurveType () const		{ return mCurveType; }
-
-	const F32& getTwistBegin() const	{ return mTwistBegin;	}
-	const F32& getTwistEnd() const		{ return mTwistEnd;	}
-	const F32& getTwist() const			{ return mTwistEnd; }	// deprecated
-	const F32& getRadiusOffset() const	{ return mRadiusOffset; }
-	const LLVector2 &getTaper() const	{ return mTaper;		}
-	const F32& getTaperX() const		{ return mTaper.mV[0];	}
-	const F32& getTaperY() const		{ return mTaper.mV[1];	}
-	const F32& getRevolutions() const	{ return mRevolutions;	}
-	const F32& getSkew() const			{ return mSkew;			}
-
-	void setCurveType(const U8 type)	{ mCurveType = type;	}
-	void setBegin(const F32 begin)		{ mBegin     = begin;	}
-	void setEnd(const F32 end)			{ mEnd       = end;	}
-
-	void setScale(const F32 x, const F32 y)		{ mScale.setVec(x,y); }
-	void setScaleX(const F32 v)					{ mScale.mV[VX] = v; }
-	void setScaleY(const F32 v)					{ mScale.mV[VY] = v; }
-	void setShear(const F32 x, const F32 y)		{ mShear.setVec(x,y); }
-	void setShearX(const F32 v)					{ mShear.mV[VX] = v; }
-	void setShearY(const F32 v)					{ mShear.mV[VY] = v; }
-
-	void setTwistBegin(const F32 twist_begin)	{ mTwistBegin	= twist_begin;	}
-	void setTwistEnd(const F32 twist_end)		{ mTwistEnd		= twist_end;	}
-	void setTwist(const F32 twist)				{ setTwistEnd(twist); }	// deprecated
-	void setRadiusOffset(const F32 radius_offset){ mRadiusOffset	= radius_offset; }
-	void setTaper(const F32 x, const F32 y)		{ mTaper.setVec(x,y);			}
-	void setTaperX(const F32 v)					{ mTaper.mV[VX]	= v;			}
-	void setTaperY(const F32 v)					{ mTaper.mV[VY]	= v;			}
-	void setRevolutions(const F32 revolutions)	{ mRevolutions	= revolutions;	}
-	void setSkew(const F32 skew)				{ mSkew			= skew;			}
-
-	friend std::ostream& operator<<(std::ostream &s, const LLPathParams &path_params);
+    LLPathParams()
+        :
+        mCurveType(LL_PCODE_PATH_LINE),
+        mBegin(0.f),
+        mEnd(1.f),
+        mScale(1.f,1.f),
+        mShear(0.f,0.f),
+        mTwistBegin(0.f),
+        mTwistEnd(0.f),
+        mRadiusOffset(0.f),
+        mTaper(0.f,0.f),
+        mRevolutions(1.f),
+        mSkew(0.f),
+        mCRC(0)
+    {
+    }
+
+    LLPathParams(U8 curve, F32 begin, F32 end, F32 scx, F32 scy, F32 shx, F32 shy, F32 twistend, F32 twistbegin, F32 radiusoffset, F32 tx, F32 ty, F32 revolutions, F32 skew)
+        : mCurveType(curve),
+          mBegin(begin),
+          mEnd(end),
+          mScale(scx,scy),
+          mShear(shx,shy),
+          mTwistBegin(twistbegin),
+          mTwistEnd(twistend),
+          mRadiusOffset(radiusoffset),
+          mTaper(tx,ty),
+          mRevolutions(revolutions),
+          mSkew(skew),
+          mCRC(0)
+    {
+    }
+
+    LLPathParams(U8 curve, U16 begin, U16 end, U8 scx, U8 scy, U8 shx, U8 shy, U8 twistend, U8 twistbegin, U8 radiusoffset, U8 tx, U8 ty, U8 revolutions, U8 skew)
+    {
+        mCurveType = curve;
+        mBegin = (F32)(begin * CUT_QUANTA);
+        mEnd = (F32)(100.f - end) * CUT_QUANTA;
+        if (mEnd > 1.f)
+            mEnd = 1.f;
+        mScale.setVec((F32) (200 - scx) * SCALE_QUANTA,(F32) (200 - scy) * SCALE_QUANTA);
+        mShear.setVec(U8_TO_F32(shx) * SHEAR_QUANTA,U8_TO_F32(shy) * SHEAR_QUANTA);
+        mTwistBegin = U8_TO_F32(twistbegin) * SCALE_QUANTA;
+        mTwistEnd = U8_TO_F32(twistend) * SCALE_QUANTA;
+        mRadiusOffset = U8_TO_F32(radiusoffset) * SCALE_QUANTA;
+        mTaper.setVec(U8_TO_F32(tx) * TAPER_QUANTA,U8_TO_F32(ty) * TAPER_QUANTA);
+        mRevolutions = ((F32)revolutions) * REV_QUANTA + 1.0f;
+        mSkew = U8_TO_F32(skew) * SCALE_QUANTA;
+
+        mCRC = 0;
+    }
+
+    bool operator==(const LLPathParams &params) const;
+    bool operator!=(const LLPathParams &params) const;
+    bool operator<(const LLPathParams &params) const;
+
+    void copyParams(const LLPathParams &params);
+
+    BOOL importFile(LLFILE *fp);
+    BOOL exportFile(LLFILE *fp) const;
+
+    BOOL importLegacyStream(std::istream& input_stream);
+    BOOL exportLegacyStream(std::ostream& output_stream) const;
+
+    LLSD asLLSD() const;
+    operator LLSD() const { return asLLSD(); }
+    bool fromLLSD(LLSD& sd);
+
+    const F32& getBegin() const         { return mBegin; }
+    const F32& getEnd() const           { return mEnd; }
+    const LLVector2 &getScale() const   { return mScale; }
+    const F32& getScaleX() const        { return mScale.mV[0]; }
+    const F32& getScaleY() const        { return mScale.mV[1]; }
+    const LLVector2 getBeginScale() const;
+    const LLVector2 getEndScale() const;
+    const LLVector2 &getShear() const   { return mShear; }
+    const F32& getShearX() const        { return mShear.mV[0]; }
+    const F32& getShearY() const        { return mShear.mV[1]; }
+    const U8& getCurveType () const     { return mCurveType; }
+
+    const F32& getTwistBegin() const    { return mTwistBegin;   }
+    const F32& getTwistEnd() const      { return mTwistEnd; }
+    const F32& getTwist() const         { return mTwistEnd; }   // deprecated
+    const F32& getRadiusOffset() const  { return mRadiusOffset; }
+    const LLVector2 &getTaper() const   { return mTaper;        }
+    const F32& getTaperX() const        { return mTaper.mV[0];  }
+    const F32& getTaperY() const        { return mTaper.mV[1];  }
+    const F32& getRevolutions() const   { return mRevolutions;  }
+    const F32& getSkew() const          { return mSkew;         }
+
+    void setCurveType(const U8 type)    { mCurveType = type;    }
+    void setBegin(const F32 begin)      { mBegin     = begin;   }
+    void setEnd(const F32 end)          { mEnd       = end; }
+
+    void setScale(const F32 x, const F32 y)     { mScale.setVec(x,y); }
+    void setScaleX(const F32 v)                 { mScale.mV[VX] = v; }
+    void setScaleY(const F32 v)                 { mScale.mV[VY] = v; }
+    void setShear(const F32 x, const F32 y)     { mShear.setVec(x,y); }
+    void setShearX(const F32 v)                 { mShear.mV[VX] = v; }
+    void setShearY(const F32 v)                 { mShear.mV[VY] = v; }
+
+    void setTwistBegin(const F32 twist_begin)   { mTwistBegin   = twist_begin;  }
+    void setTwistEnd(const F32 twist_end)       { mTwistEnd     = twist_end;    }
+    void setTwist(const F32 twist)              { setTwistEnd(twist); } // deprecated
+    void setRadiusOffset(const F32 radius_offset){ mRadiusOffset    = radius_offset; }
+    void setTaper(const F32 x, const F32 y)     { mTaper.setVec(x,y);           }
+    void setTaperX(const F32 v)                 { mTaper.mV[VX] = v;            }
+    void setTaperY(const F32 v)                 { mTaper.mV[VY] = v;            }
+    void setRevolutions(const F32 revolutions)  { mRevolutions  = revolutions;  }
+    void setSkew(const F32 skew)                { mSkew         = skew;         }
+
+    friend std::ostream& operator<<(std::ostream &s, const LLPathParams &path_params);
 
 protected:
-	// Path params
-	U8			  mCurveType;
-	F32           mBegin;
-	F32           mEnd;
-	LLVector2	  mScale;
-	LLVector2     mShear;
-
-	F32			  mTwistBegin;
-	F32			  mTwistEnd;
-	F32			  mRadiusOffset;
-	LLVector2	  mTaper;
-	F32			  mRevolutions;
-	F32			  mSkew;
-
-	U32           mCRC;
+    // Path params
+    U8            mCurveType;
+    F32           mBegin;
+    F32           mEnd;
+    LLVector2     mScale;
+    LLVector2     mShear;
+
+    F32           mTwistBegin;
+    F32           mTwistEnd;
+    F32           mRadiusOffset;
+    LLVector2     mTaper;
+    F32           mRevolutions;
+    F32           mSkew;
+
+    U32           mCRC;
 };
 
 inline bool LLPathParams::operator==(const LLPathParams &params) const
 {
-	return
-		(getCurveType() == params.getCurveType()) && 
-		(getScale() == params.getScale()) &&
-		(getBegin() == params.getBegin()) && 
-		(getEnd() == params.getEnd()) && 
-		(getShear() == params.getShear()) &&
-		(getTwist() == params.getTwist()) &&
-		(getTwistBegin() == params.getTwistBegin()) &&
-		(getRadiusOffset() == params.getRadiusOffset()) &&
-		(getTaper() == params.getTaper()) &&
-		(getRevolutions() == params.getRevolutions()) &&
-		(getSkew() == params.getSkew());
+    return
+        (getCurveType() == params.getCurveType()) &&
+        (getScale() == params.getScale()) &&
+        (getBegin() == params.getBegin()) &&
+        (getEnd() == params.getEnd()) &&
+        (getShear() == params.getShear()) &&
+        (getTwist() == params.getTwist()) &&
+        (getTwistBegin() == params.getTwistBegin()) &&
+        (getRadiusOffset() == params.getRadiusOffset()) &&
+        (getTaper() == params.getTaper()) &&
+        (getRevolutions() == params.getRevolutions()) &&
+        (getSkew() == params.getSkew());
 }
 
 inline bool LLPathParams::operator!=(const LLPathParams &params) const
 {
-	return
-		(getCurveType() != params.getCurveType()) ||
-		(getScale() != params.getScale()) ||
-		(getBegin() != params.getBegin()) || 
-		(getEnd() != params.getEnd()) || 
-		(getShear() != params.getShear()) ||
-		(getTwist() != params.getTwist()) ||
-		(getTwistBegin() !=params.getTwistBegin()) ||
-		(getRadiusOffset() != params.getRadiusOffset()) ||
-		(getTaper() != params.getTaper()) ||
-		(getRevolutions() != params.getRevolutions()) ||
-		(getSkew() != params.getSkew());
+    return
+        (getCurveType() != params.getCurveType()) ||
+        (getScale() != params.getScale()) ||
+        (getBegin() != params.getBegin()) ||
+        (getEnd() != params.getEnd()) ||
+        (getShear() != params.getShear()) ||
+        (getTwist() != params.getTwist()) ||
+        (getTwistBegin() !=params.getTwistBegin()) ||
+        (getRadiusOffset() != params.getRadiusOffset()) ||
+        (getTaper() != params.getTaper()) ||
+        (getRevolutions() != params.getRevolutions()) ||
+        (getSkew() != params.getSkew());
 }
 
 
 inline bool LLPathParams::operator<(const LLPathParams &params) const
 {
-	if( getCurveType() != params.getCurveType()) 
-	{
-		return getCurveType() < params.getCurveType();
-	}
-	else
-	if( getScale() != params.getScale()) 
-	{
-		return getScale() < params.getScale();
-	}
-	else
-	if( getBegin() != params.getBegin()) 
-	{
-		return getBegin() < params.getBegin();
-	}
-	else
-	if( getEnd() != params.getEnd()) 
-	{
-		return getEnd() < params.getEnd();
-	}
-	else
-	if( getShear() != params.getShear()) 
-	{
-		return getShear() < params.getShear();
-	}
-	else
-	if( getTwist() != params.getTwist())
-	{
-		return getTwist() < params.getTwist();
-	}
-	else
-	if( getTwistBegin() != params.getTwistBegin())
-	{
-		return getTwistBegin() < params.getTwistBegin();
-	}
-	else
-	if( getRadiusOffset() != params.getRadiusOffset())
-	{
-		return getRadiusOffset() < params.getRadiusOffset();
-	}
-	else
-	if( getTaper() != params.getTaper())
-	{
-		return getTaper() < params.getTaper();
-	}
-	else
-	if( getRevolutions() != params.getRevolutions())
-	{
-		return getRevolutions() < params.getRevolutions();
-	}
-	else
-	{
-		return getSkew() < params.getSkew();
-	}
+    if( getCurveType() != params.getCurveType())
+    {
+        return getCurveType() < params.getCurveType();
+    }
+    else
+    if( getScale() != params.getScale())
+    {
+        return getScale() < params.getScale();
+    }
+    else
+    if( getBegin() != params.getBegin())
+    {
+        return getBegin() < params.getBegin();
+    }
+    else
+    if( getEnd() != params.getEnd())
+    {
+        return getEnd() < params.getEnd();
+    }
+    else
+    if( getShear() != params.getShear())
+    {
+        return getShear() < params.getShear();
+    }
+    else
+    if( getTwist() != params.getTwist())
+    {
+        return getTwist() < params.getTwist();
+    }
+    else
+    if( getTwistBegin() != params.getTwistBegin())
+    {
+        return getTwistBegin() < params.getTwistBegin();
+    }
+    else
+    if( getRadiusOffset() != params.getRadiusOffset())
+    {
+        return getRadiusOffset() < params.getRadiusOffset();
+    }
+    else
+    if( getTaper() != params.getTaper())
+    {
+        return getTaper() < params.getTaper();
+    }
+    else
+    if( getRevolutions() != params.getRevolutions())
+    {
+        return getRevolutions() < params.getRevolutions();
+    }
+    else
+    {
+        return getSkew() < params.getSkew();
+    }
 }
 
 typedef LLVolumeParams* LLVolumeParamsPtr;
@@ -559,190 +559,190 @@ typedef const LLVolumeParams* const_LLVolumeParamsPtr;
 class LLVolumeParams
 {
 public:
-	LLVolumeParams()
-		: mSculptType(LL_SCULPT_TYPE_NONE)
-	{
-	}
-
-	LLVolumeParams(LLProfileParams &profile, LLPathParams &path,
-				   LLUUID sculpt_id = LLUUID::null, U8 sculpt_type = LL_SCULPT_TYPE_NONE)
-		: mProfileParams(profile), mPathParams(path), mSculptID(sculpt_id), mSculptType(sculpt_type)
-	{
-	}
-
-	bool operator==(const LLVolumeParams &params) const;
-	bool operator!=(const LLVolumeParams &params) const;
-	bool operator<(const LLVolumeParams &params) const;
-
-
-	void copyParams(const LLVolumeParams &params);
-	
-	const LLProfileParams &getProfileParams() const {return mProfileParams;}
-	LLProfileParams &getProfileParams() {return mProfileParams;}
-	const LLPathParams &getPathParams() const {return mPathParams;}
-	LLPathParams &getPathParams() {return mPathParams;}
-
-	BOOL importFile(LLFILE *fp);
-	BOOL exportFile(LLFILE *fp) const;
-
-	BOOL importLegacyStream(std::istream& input_stream);
-	BOOL exportLegacyStream(std::ostream& output_stream) const;
-
-	LLSD sculptAsLLSD() const;
-	bool sculptFromLLSD(LLSD& sd);
-	
-	LLSD asLLSD() const;
-	operator LLSD() const { return asLLSD(); }
-	bool fromLLSD(LLSD& sd);
-
-	bool setType(U8 profile, U8 path);
-
-	//void setBeginS(const F32 beginS)			{ mProfileParams.setBegin(beginS); }	// range 0 to 1
-	//void setBeginT(const F32 beginT)			{ mPathParams.setBegin(beginT); }		// range 0 to 1
-	//void setEndS(const F32 endS)				{ mProfileParams.setEnd(endS); }		// range 0 to 1, must be greater than begin
-	//void setEndT(const F32 endT)				{ mPathParams.setEnd(endT); }			// range 0 to 1, must be greater than begin
-
-	bool setBeginAndEndS(const F32 begin, const F32 end);			// both range from 0 to 1, begin must be less than end
-	bool setBeginAndEndT(const F32 begin, const F32 end);			// both range from 0 to 1, begin must be less than end
-
-	bool setHollow(const F32 hollow);	// range 0 to 1
-	bool setRatio(const F32 x)					{ return setRatio(x,x); }			// 0 = point, 1 = same as base
-	bool setShear(const F32 x)					{ return setShear(x,x); }			// 0 = no movement, 
-	bool setRatio(const F32 x, const F32 y);			// 0 = point, 1 = same as base
-	bool setShear(const F32 x, const F32 y);			// 0 = no movement
-
-	bool setTwistBegin(const F32 twist_begin);	// range -1 to 1
-	bool setTwistEnd(const F32 twist_end);		// range -1 to 1
-	bool setTwist(const F32 twist)				{ return setTwistEnd(twist); }		// deprecated
-	bool setTaper(const F32 x, const F32 y)		{ bool pass_x = setTaperX(x); bool pass_y = setTaperY(y); return pass_x && pass_y; }
-	bool setTaperX(const F32 v);				// -1 to 1
-	bool setTaperY(const F32 v);				// -1 to 1
-	bool setRevolutions(const F32 revolutions);	// 1 to 4
-	bool setRadiusOffset(const F32 radius_offset);
-	bool setSkew(const F32 skew);
-	bool setSculptID(const LLUUID sculpt_id, U8 sculpt_type);
-
-	static bool validate(U8 prof_curve, F32 prof_begin, F32 prof_end, F32 hollow,
-		U8 path_curve, F32 path_begin, F32 path_end,
-		F32 scx, F32 scy, F32 shx, F32 shy,
-		F32 twistend, F32 twistbegin, F32 radiusoffset,
-		F32 tx, F32 ty, F32 revolutions, F32 skew);
-	
-	const F32&  getBeginS() 	const	{ return mProfileParams.getBegin(); }
- 	const F32&  getBeginT() 	const	{ return mPathParams.getBegin(); }
- 	const F32&  getEndS() 		const	{ return mProfileParams.getEnd(); }
- 	const F32&  getEndT() 		const	{ return mPathParams.getEnd(); }
- 
- 	const F32&  getHollow() 	const   { return mProfileParams.getHollow(); }
- 	const F32&  getTwist() 	const   	{ return mPathParams.getTwist(); }
- 	const F32&  getRatio() 	const		{ return mPathParams.getScaleX(); }
- 	const F32&  getRatioX() 	const   { return mPathParams.getScaleX(); }
- 	const F32&  getRatioY() 	const   { return mPathParams.getScaleY(); }
- 	const F32&  getShearX() 	const   { return mPathParams.getShearX(); }
- 	const F32&  getShearY() 	const   { return mPathParams.getShearY(); }
-
-	const F32&	getTwistBegin()const	{ return mPathParams.getTwistBegin();	}
-	const F32&  getRadiusOffset() const	{ return mPathParams.getRadiusOffset();	}
-	const F32&  getTaper() const		{ return mPathParams.getTaperX();		}
-	const F32&	getTaperX() const		{ return mPathParams.getTaperX();		}
-	const F32&  getTaperY() const		{ return mPathParams.getTaperY();		}
-	const F32&  getRevolutions() const	{ return mPathParams.getRevolutions();	}
-	const F32&  getSkew() const			{ return mPathParams.getSkew();			}
-	const LLUUID& getSculptID() const	{ return mSculptID;						}
-	const U8& getSculptType() const     { return mSculptType;                   }
-	bool isSculpt() const;
-	bool isMeshSculpt() const;
-	BOOL isConvex() const;
-
-	// 'begin' and 'end' should be in range [0, 1] (they will be clamped)
-	// (begin, end) = (0, 1) will not change the volume
-	// (begin, end) = (0, 0.5) will reduce the volume to the first half of its profile/path (S/T)
-	void reduceS(F32 begin, F32 end);
-	void reduceT(F32 begin, F32 end);
-
-	struct compare
-	{
-		bool operator()( const const_LLVolumeParamsPtr& first, const const_LLVolumeParamsPtr& second) const
-		{
-			return (*first < *second);
-		}
-	};
-	
-	friend std::ostream& operator<<(std::ostream &s, const LLVolumeParams &volume_params);
-
-	// debug helper functions
-	void setCube();
+    LLVolumeParams()
+        : mSculptType(LL_SCULPT_TYPE_NONE)
+    {
+    }
+
+    LLVolumeParams(LLProfileParams &profile, LLPathParams &path,
+                   LLUUID sculpt_id = LLUUID::null, U8 sculpt_type = LL_SCULPT_TYPE_NONE)
+        : mProfileParams(profile), mPathParams(path), mSculptID(sculpt_id), mSculptType(sculpt_type)
+    {
+    }
+
+    bool operator==(const LLVolumeParams &params) const;
+    bool operator!=(const LLVolumeParams &params) const;
+    bool operator<(const LLVolumeParams &params) const;
+
+
+    void copyParams(const LLVolumeParams &params);
+
+    const LLProfileParams &getProfileParams() const {return mProfileParams;}
+    LLProfileParams &getProfileParams() {return mProfileParams;}
+    const LLPathParams &getPathParams() const {return mPathParams;}
+    LLPathParams &getPathParams() {return mPathParams;}
+
+    BOOL importFile(LLFILE *fp);
+    BOOL exportFile(LLFILE *fp) const;
+
+    BOOL importLegacyStream(std::istream& input_stream);
+    BOOL exportLegacyStream(std::ostream& output_stream) const;
+
+    LLSD sculptAsLLSD() const;
+    bool sculptFromLLSD(LLSD& sd);
+
+    LLSD asLLSD() const;
+    operator LLSD() const { return asLLSD(); }
+    bool fromLLSD(LLSD& sd);
+
+    bool setType(U8 profile, U8 path);
+
+    //void setBeginS(const F32 beginS)          { mProfileParams.setBegin(beginS); }    // range 0 to 1
+    //void setBeginT(const F32 beginT)          { mPathParams.setBegin(beginT); }       // range 0 to 1
+    //void setEndS(const F32 endS)              { mProfileParams.setEnd(endS); }        // range 0 to 1, must be greater than begin
+    //void setEndT(const F32 endT)              { mPathParams.setEnd(endT); }           // range 0 to 1, must be greater than begin
+
+    bool setBeginAndEndS(const F32 begin, const F32 end);           // both range from 0 to 1, begin must be less than end
+    bool setBeginAndEndT(const F32 begin, const F32 end);           // both range from 0 to 1, begin must be less than end
+
+    bool setHollow(const F32 hollow);   // range 0 to 1
+    bool setRatio(const F32 x)                  { return setRatio(x,x); }           // 0 = point, 1 = same as base
+    bool setShear(const F32 x)                  { return setShear(x,x); }           // 0 = no movement,
+    bool setRatio(const F32 x, const F32 y);            // 0 = point, 1 = same as base
+    bool setShear(const F32 x, const F32 y);            // 0 = no movement
+
+    bool setTwistBegin(const F32 twist_begin);  // range -1 to 1
+    bool setTwistEnd(const F32 twist_end);      // range -1 to 1
+    bool setTwist(const F32 twist)              { return setTwistEnd(twist); }      // deprecated
+    bool setTaper(const F32 x, const F32 y)     { bool pass_x = setTaperX(x); bool pass_y = setTaperY(y); return pass_x && pass_y; }
+    bool setTaperX(const F32 v);                // -1 to 1
+    bool setTaperY(const F32 v);                // -1 to 1
+    bool setRevolutions(const F32 revolutions); // 1 to 4
+    bool setRadiusOffset(const F32 radius_offset);
+    bool setSkew(const F32 skew);
+    bool setSculptID(const LLUUID sculpt_id, U8 sculpt_type);
+
+    static bool validate(U8 prof_curve, F32 prof_begin, F32 prof_end, F32 hollow,
+        U8 path_curve, F32 path_begin, F32 path_end,
+        F32 scx, F32 scy, F32 shx, F32 shy,
+        F32 twistend, F32 twistbegin, F32 radiusoffset,
+        F32 tx, F32 ty, F32 revolutions, F32 skew);
+
+    const F32&  getBeginS()     const   { return mProfileParams.getBegin(); }
+    const F32&  getBeginT()     const   { return mPathParams.getBegin(); }
+    const F32&  getEndS()       const   { return mProfileParams.getEnd(); }
+    const F32&  getEndT()       const   { return mPathParams.getEnd(); }
+
+    const F32&  getHollow()     const   { return mProfileParams.getHollow(); }
+    const F32&  getTwist()  const       { return mPathParams.getTwist(); }
+    const F32&  getRatio()  const       { return mPathParams.getScaleX(); }
+    const F32&  getRatioX()     const   { return mPathParams.getScaleX(); }
+    const F32&  getRatioY()     const   { return mPathParams.getScaleY(); }
+    const F32&  getShearX()     const   { return mPathParams.getShearX(); }
+    const F32&  getShearY()     const   { return mPathParams.getShearY(); }
+
+    const F32&  getTwistBegin()const    { return mPathParams.getTwistBegin();   }
+    const F32&  getRadiusOffset() const { return mPathParams.getRadiusOffset(); }
+    const F32&  getTaper() const        { return mPathParams.getTaperX();       }
+    const F32&  getTaperX() const       { return mPathParams.getTaperX();       }
+    const F32&  getTaperY() const       { return mPathParams.getTaperY();       }
+    const F32&  getRevolutions() const  { return mPathParams.getRevolutions();  }
+    const F32&  getSkew() const         { return mPathParams.getSkew();         }
+    const LLUUID& getSculptID() const   { return mSculptID;                     }
+    const U8& getSculptType() const     { return mSculptType;                   }
+    bool isSculpt() const;
+    bool isMeshSculpt() const;
+    BOOL isConvex() const;
+
+    // 'begin' and 'end' should be in range [0, 1] (they will be clamped)
+    // (begin, end) = (0, 1) will not change the volume
+    // (begin, end) = (0, 0.5) will reduce the volume to the first half of its profile/path (S/T)
+    void reduceS(F32 begin, F32 end);
+    void reduceT(F32 begin, F32 end);
+
+    struct compare
+    {
+        bool operator()( const const_LLVolumeParamsPtr& first, const const_LLVolumeParamsPtr& second) const
+        {
+            return (*first < *second);
+        }
+    };
+
+    friend std::ostream& operator<<(std::ostream &s, const LLVolumeParams &volume_params);
+
+    // debug helper functions
+    void setCube();
 
 protected:
-	LLProfileParams mProfileParams;
-	LLPathParams	mPathParams;
-	LLUUID mSculptID;
-	U8 mSculptType;
+    LLProfileParams mProfileParams;
+    LLPathParams    mPathParams;
+    LLUUID mSculptID;
+    U8 mSculptType;
 };
 
 
 class LLProfile
 {
-	friend class LLVolume;
+    friend class LLVolume;
 
 public:
-	LLProfile()
-		: mOpen(FALSE),
-		  mConcave(FALSE),
-		  mDirty(TRUE),
-		  mTotalOut(0),
-		  mTotal(2)
-	{
-	}
-
-	S32	 getTotal() const								{ return mTotal; }
-	S32	 getTotalOut() const							{ return mTotalOut; }	// Total number of outside points
-	BOOL isFlat(S32 face) const							{ return (mFaces[face].mCount == 2); }
-	BOOL isOpen() const									{ return mOpen; }
-	void setDirty()										{ mDirty     = TRUE; }
-
-	static S32 getNumPoints(const LLProfileParams& params, BOOL path_open, F32 detail = 1.0f, S32 split = 0,
-				  BOOL is_sculpted = FALSE, S32 sculpt_size = 0);
-	BOOL generate(const LLProfileParams& params, BOOL path_open, F32 detail = 1.0f, S32 split = 0,
-				  BOOL is_sculpted = FALSE, S32 sculpt_size = 0);
-	BOOL isConcave() const								{ return mConcave; }
+    LLProfile()
+        : mOpen(FALSE),
+          mConcave(FALSE),
+          mDirty(TRUE),
+          mTotalOut(0),
+          mTotal(2)
+    {
+    }
+
+    S32  getTotal() const                               { return mTotal; }
+    S32  getTotalOut() const                            { return mTotalOut; }   // Total number of outside points
+    BOOL isFlat(S32 face) const                         { return (mFaces[face].mCount == 2); }
+    BOOL isOpen() const                                 { return mOpen; }
+    void setDirty()                                     { mDirty     = TRUE; }
+
+    static S32 getNumPoints(const LLProfileParams& params, BOOL path_open, F32 detail = 1.0f, S32 split = 0,
+                  BOOL is_sculpted = FALSE, S32 sculpt_size = 0);
+    BOOL generate(const LLProfileParams& params, BOOL path_open, F32 detail = 1.0f, S32 split = 0,
+                  BOOL is_sculpted = FALSE, S32 sculpt_size = 0);
+    BOOL isConcave() const                              { return mConcave; }
 public:
-	struct Face
-	{
-		S32       mIndex;
-		S32       mCount;
-		F32       mScaleU;
-		BOOL      mCap;
-		BOOL      mFlat;
-		LLFaceID  mFaceID;
-	};
-	
-	LLAlignedArray<LLVector4a, 64> mProfile;	
-	//LLAlignedArray<LLVector4a, 64> mNormals;
-	std::vector<Face>      mFaces;
-
-	//LLAlignedArray<LLVector4a, 64> mEdgeNormals;
-	//LLAlignedArray<LLVector4a, 64> mEdgeCenters;
-
-	friend std::ostream& operator<<(std::ostream &s, const LLProfile &profile);
+    struct Face
+    {
+        S32       mIndex;
+        S32       mCount;
+        F32       mScaleU;
+        BOOL      mCap;
+        BOOL      mFlat;
+        LLFaceID  mFaceID;
+    };
+
+    LLAlignedArray<LLVector4a, 64> mProfile;
+    //LLAlignedArray<LLVector4a, 64> mNormals;
+    std::vector<Face>      mFaces;
+
+    //LLAlignedArray<LLVector4a, 64> mEdgeNormals;
+    //LLAlignedArray<LLVector4a, 64> mEdgeCenters;
+
+    friend std::ostream& operator<<(std::ostream &s, const LLProfile &profile);
 
 protected:
-	~LLProfile();
+    ~LLProfile();
 
-	static S32 getNumNGonPoints(const LLProfileParams& params, S32 sides, F32 offset=0.0f, F32 bevel = 0.0f, F32 ang_scale = 1.f, S32 split = 0);
-	void genNGon(const LLProfileParams& params, S32 sides, F32 offset=0.0f, F32 bevel = 0.0f, F32 ang_scale = 1.f, S32 split = 0);
+    static S32 getNumNGonPoints(const LLProfileParams& params, S32 sides, F32 offset=0.0f, F32 bevel = 0.0f, F32 ang_scale = 1.f, S32 split = 0);
+    void genNGon(const LLProfileParams& params, S32 sides, F32 offset=0.0f, F32 bevel = 0.0f, F32 ang_scale = 1.f, S32 split = 0);
 
-	Face* addHole(const LLProfileParams& params, BOOL flat, F32 sides, F32 offset, F32 box_hollow, F32 ang_scale, S32 split = 0);
-	Face* addCap (S16 faceID);
-	Face* addFace(S32 index, S32 count, F32 scaleU, S16 faceID, BOOL flat);
+    Face* addHole(const LLProfileParams& params, BOOL flat, F32 sides, F32 offset, F32 box_hollow, F32 ang_scale, S32 split = 0);
+    Face* addCap (S16 faceID);
+    Face* addFace(S32 index, S32 count, F32 scaleU, S16 faceID, BOOL flat);
 
 protected:
-	BOOL		  mOpen;
-	BOOL		  mConcave;
-	BOOL          mDirty;
+    BOOL          mOpen;
+    BOOL          mConcave;
+    BOOL          mDirty;
 
-	S32			  mTotalOut;
-	S32			  mTotal;
+    S32           mTotalOut;
+    S32           mTotal;
 };
 
 //-------------------------------------------------------------------
@@ -752,220 +752,220 @@ protected:
 class LLPath
 {
 public:
-	class PathPt
-	{
-	public:
-		LLMatrix4a   mRot;
-		LLVector4a	 mPos;
-		
-		LLVector4a   mScale;
-		F32			 mTexT;
-		F32 pad[3]; //for alignment
-		PathPt() 
-		{ 
-			mPos.clear(); 
-			mTexT = 0; 
-			mScale.clear(); 
-			mRot.setRows(LLVector4a(1,0,0,0),
-						LLVector4a(0,1,0,0),
-						LLVector4a(0,0,1,0));
-
-			//distinguished data in the pad for debugging
-			pad[0] = 3.14159f;
-			pad[1] = -3.14159f;
-			pad[2] = 0.585f;
-		}
-	};
+    class PathPt
+    {
+    public:
+        LLMatrix4a   mRot;
+        LLVector4a   mPos;
+
+        LLVector4a   mScale;
+        F32          mTexT;
+        F32 pad[3]; //for alignment
+        PathPt()
+        {
+            mPos.clear();
+            mTexT = 0;
+            mScale.clear();
+            mRot.setRows(LLVector4a(1,0,0,0),
+                        LLVector4a(0,1,0,0),
+                        LLVector4a(0,0,1,0));
+
+            //distinguished data in the pad for debugging
+            pad[0] = 3.14159f;
+            pad[1] = -3.14159f;
+            pad[2] = 0.585f;
+        }
+    };
 
 public:
-	LLPath()
-		: mOpen(FALSE),
-		  mTotal(0),
-		  mDirty(TRUE),
-		  mStep(1)
-	{
-	}
+    LLPath()
+        : mOpen(FALSE),
+          mTotal(0),
+          mDirty(TRUE),
+          mStep(1)
+    {
+    }
 
-	virtual ~LLPath();
+    virtual ~LLPath();
 
-	static S32 getNumPoints(const LLPathParams& params, F32 detail);
-	static S32 getNumNGonPoints(const LLPathParams& params, S32 sides, F32 offset=0.0f, F32 end_scale = 1.f, F32 twist_scale = 1.f);
+    static S32 getNumPoints(const LLPathParams& params, F32 detail);
+    static S32 getNumNGonPoints(const LLPathParams& params, S32 sides, F32 offset=0.0f, F32 end_scale = 1.f, F32 twist_scale = 1.f);
 
-	void genNGon(const LLPathParams& params, S32 sides, F32 offset=0.0f, F32 end_scale = 1.f, F32 twist_scale = 1.f);
-	virtual BOOL generate(const LLPathParams& params, F32 detail=1.0f, S32 split = 0,
-						  BOOL is_sculpted = FALSE, S32 sculpt_size = 0);
+    void genNGon(const LLPathParams& params, S32 sides, F32 offset=0.0f, F32 end_scale = 1.f, F32 twist_scale = 1.f);
+    virtual BOOL generate(const LLPathParams& params, F32 detail=1.0f, S32 split = 0,
+                          BOOL is_sculpted = FALSE, S32 sculpt_size = 0);
 
-	BOOL isOpen() const						{ return mOpen; }
-	F32 getStep() const						{ return mStep; }
-	void setDirty()							{ mDirty     = TRUE; }
+    BOOL isOpen() const                     { return mOpen; }
+    F32 getStep() const                     { return mStep; }
+    void setDirty()                         { mDirty     = TRUE; }
 
-	S32 getPathLength() const				{ return (S32)mPath.size(); }
+    S32 getPathLength() const               { return (S32)mPath.size(); }
 
-	void resizePath(S32 length) { mPath.resize(length); }
+    void resizePath(S32 length) { mPath.resize(length); }
 
-	friend std::ostream& operator<<(std::ostream &s, const LLPath &path);
+    friend std::ostream& operator<<(std::ostream &s, const LLPath &path);
 
 public:
-	LLAlignedArray<PathPt, 64> mPath;
+    LLAlignedArray<PathPt, 64> mPath;
 
 protected:
-	BOOL		  mOpen;
-	S32			  mTotal;
-	BOOL          mDirty;
-	F32           mStep;
+    BOOL          mOpen;
+    S32           mTotal;
+    BOOL          mDirty;
+    F32           mStep;
 };
 
 class LLDynamicPath : public LLPath
 {
 public:
-	LLDynamicPath() : LLPath() { }
-	/*virtual*/ BOOL generate(const LLPathParams& params, F32 detail=1.0f, S32 split = 0,
-							  BOOL is_sculpted = FALSE, S32 sculpt_size = 0);
+    LLDynamicPath() : LLPath() { }
+    /*virtual*/ BOOL generate(const LLPathParams& params, F32 detail=1.0f, S32 split = 0,
+                              BOOL is_sculpted = FALSE, S32 sculpt_size = 0);
 };
 
 // Yet another "face" class - caches volume-specific, but not instance-specific data for faces)
 class LLVolumeFace
 {
 public:
-	class VertexData
-	{
-		enum 
-		{
-			POSITION = 0,
-			NORMAL = 1
-		};
-
-	private:
-		void init();
-	public:
-		VertexData();
-		VertexData(const VertexData& rhs);
-		const VertexData& operator=(const VertexData& rhs);
-
-		~VertexData();
-		LLVector4a& getPosition();
-		LLVector4a& getNormal();
-		const LLVector4a& getPosition() const;
-		const LLVector4a& getNormal() const;
-		void setPosition(const LLVector4a& pos);
-		void setNormal(const LLVector4a& norm);
-		
-
-		LLVector2 mTexCoord;
-
-		bool operator<(const VertexData& rhs) const;
-		bool operator==(const VertexData& rhs) const;
-		bool compareNormal(const VertexData& rhs, F32 angle_cutoff) const;
-
-	private:
-		LLVector4a* mData;
-	};
-
-	LLVolumeFace();
-	LLVolumeFace(const LLVolumeFace& src);
-	LLVolumeFace& operator=(const LLVolumeFace& rhs);
-
-	~LLVolumeFace();
+    class VertexData
+    {
+        enum
+        {
+            POSITION = 0,
+            NORMAL = 1
+        };
+
+    private:
+        void init();
+    public:
+        VertexData();
+        VertexData(const VertexData& rhs);
+        const VertexData& operator=(const VertexData& rhs);
+
+        ~VertexData();
+        LLVector4a& getPosition();
+        LLVector4a& getNormal();
+        const LLVector4a& getPosition() const;
+        const LLVector4a& getNormal() const;
+        void setPosition(const LLVector4a& pos);
+        void setNormal(const LLVector4a& norm);
+
+
+        LLVector2 mTexCoord;
+
+        bool operator<(const VertexData& rhs) const;
+        bool operator==(const VertexData& rhs) const;
+        bool compareNormal(const VertexData& rhs, F32 angle_cutoff) const;
+
+    private:
+        LLVector4a* mData;
+    };
+
+    LLVolumeFace();
+    LLVolumeFace(const LLVolumeFace& src);
+    LLVolumeFace& operator=(const LLVolumeFace& rhs);
+
+    ~LLVolumeFace();
 private:
-	void freeData();
+    void freeData();
 public:
 
-	BOOL create(LLVolume* volume, BOOL partial_build = FALSE);
-	void createTangents();
-	
-	void resizeVertices(S32 num_verts);
-	void allocateTangents(S32 num_verts);
-	void allocateWeights(S32 num_verts);
+    BOOL create(LLVolume* volume, BOOL partial_build = FALSE);
+    void createTangents();
+
+    void resizeVertices(S32 num_verts);
+    void allocateTangents(S32 num_verts);
+    void allocateWeights(S32 num_verts);
     void allocateJointIndices(S32 num_verts);
-	void resizeIndices(S32 num_indices);
-	void fillFromLegacyData(std::vector<LLVolumeFace::VertexData>& v, std::vector<U16>& idx);
+    void resizeIndices(S32 num_indices);
+    void fillFromLegacyData(std::vector<LLVolumeFace::VertexData>& v, std::vector<U16>& idx);
 
-	void pushVertex(const VertexData& cv);
-	void pushVertex(const LLVector4a& pos, const LLVector4a& norm, const LLVector2& tc);
-	void pushIndex(const U16& idx);
+    void pushVertex(const VertexData& cv);
+    void pushVertex(const LLVector4a& pos, const LLVector4a& norm, const LLVector2& tc);
+    void pushIndex(const U16& idx);
 
-	void swapData(LLVolumeFace& rhs);
+    void swapData(LLVolumeFace& rhs);
 
-	void getVertexData(U16 indx, LLVolumeFace::VertexData& cv);
+    void getVertexData(U16 indx, LLVolumeFace::VertexData& cv);
 
-	class VertexMapData : public LLVolumeFace::VertexData
-	{
-	public:
-		U16 mIndex;
+    class VertexMapData : public LLVolumeFace::VertexData
+    {
+    public:
+        U16 mIndex;
 
-		bool operator==(const LLVolumeFace::VertexData& rhs) const;
+        bool operator==(const LLVolumeFace::VertexData& rhs) const;
 
-		struct ComparePosition
-		{
-			bool operator()(const LLVector3& a, const LLVector3& b) const;
-		};
+        struct ComparePosition
+        {
+            bool operator()(const LLVector3& a, const LLVector3& b) const;
+        };
 
-		typedef std::map<LLVector3, std::vector<VertexMapData>, VertexMapData::ComparePosition > PointMap;
-	};
+        typedef std::map<LLVector3, std::vector<VertexMapData>, VertexMapData::ComparePosition > PointMap;
+    };
 
     // Eliminates non unique triangles, takes positions,
     // normals and texture coordinates into account.
     void remap();
 
-	void optimize(F32 angle_cutoff = 2.f);
-	bool cacheOptimize(bool gen_tangents = false);
+    void optimize(F32 angle_cutoff = 2.f);
+    bool cacheOptimize(bool gen_tangents = false);
 
-	void createOctree(F32 scaler = 0.25f, const LLVector4a& center = LLVector4a(0,0,0), const LLVector4a& size = LLVector4a(0.5f,0.5f,0.5f));
+    void createOctree(F32 scaler = 0.25f, const LLVector4a& center = LLVector4a(0,0,0), const LLVector4a& size = LLVector4a(0.5f,0.5f,0.5f));
     void destroyOctree();
     // Get a reference to the octree, which may be null
     const LLOctreeNode<LLVolumeTriangle, LLVolumeTriangle*>* getOctree() const;
 
-	enum
-	{
-		SINGLE_MASK =	0x0001,
-		CAP_MASK =		0x0002,
-		END_MASK =		0x0004,
-		SIDE_MASK =		0x0008,
-		INNER_MASK =	0x0010,
-		OUTER_MASK =	0x0020,
-		HOLLOW_MASK =	0x0040,
-		OPEN_MASK =		0x0080,
-		FLAT_MASK =		0x0100,
-		TOP_MASK =		0x0200,
-		BOTTOM_MASK =	0x0400
-	};
-	
+    enum
+    {
+        SINGLE_MASK =   0x0001,
+        CAP_MASK =      0x0002,
+        END_MASK =      0x0004,
+        SIDE_MASK =     0x0008,
+        INNER_MASK =    0x0010,
+        OUTER_MASK =    0x0020,
+        HOLLOW_MASK =   0x0040,
+        OPEN_MASK =     0x0080,
+        FLAT_MASK =     0x0100,
+        TOP_MASK =      0x0200,
+        BOTTOM_MASK =   0x0400
+    };
+
 public:
-	S32 mID;
-	U32 mTypeMask;
-	
-	// Only used for INNER/OUTER faces
-	S32 mBeginS;
-	S32 mBeginT;
-	S32 mNumS;
-	S32 mNumT;
-
-	LLVector4a* mExtents; //minimum and maximum point of face
-	LLVector4a* mCenter;
-	LLVector2   mTexCoordExtents[2]; //minimum and maximum of texture coordinates of the face.
-
-	S32 mNumVertices; // num vertices == num normals == num texcoords
-	S32 mNumAllocatedVertices;
-	S32 mNumIndices;
-
-	LLVector4a* mPositions; // Contains vertices, nortmals and texcoords
-	LLVector4a* mNormals; // pointer into mPositions
-	LLVector4a* mTangents;
-	LLVector2*  mTexCoords; // pointer into mPositions
-
-	// mIndices contains mNumIndices amount of elements.
-	// It contains triangles, each 3 indices describe one triangle.
+    S32 mID;
+    U32 mTypeMask;
+
+    // Only used for INNER/OUTER faces
+    S32 mBeginS;
+    S32 mBeginT;
+    S32 mNumS;
+    S32 mNumT;
+
+    LLVector4a* mExtents; //minimum and maximum point of face
+    LLVector4a* mCenter;
+    LLVector2   mTexCoordExtents[2]; //minimum and maximum of texture coordinates of the face.
+
+    S32 mNumVertices; // num vertices == num normals == num texcoords
+    S32 mNumAllocatedVertices;
+    S32 mNumIndices;
+
+    LLVector4a* mPositions; // Contains vertices, nortmals and texcoords
+    LLVector4a* mNormals; // pointer into mPositions
+    LLVector4a* mTangents;
+    LLVector2*  mTexCoords; // pointer into mPositions
+
+    // mIndices contains mNumIndices amount of elements.
+    // It contains triangles, each 3 indices describe one triangle.
     // If mIndices contains {0, 2, 3, 1, 2, 4}, it means there
     // are two triangles {0, 2, 3} and {1, 2, 4} with values being
     // indexes for mPositions/mNormals/mTexCoords
-	U16* mIndices;
+    U16* mIndices;
 
-	std::vector<S32>	mEdge;
+    std::vector<S32>    mEdge;
 
-	//list of skin weights for rigged volumes
-	// format is mWeights[vertex_index].mV[influence] = <joint_index>.<weight>
-	// mWeights.size() should be empty or match mVertices.size()  
-	LLVector4a* mWeights;
+    //list of skin weights for rigged volumes
+    // format is mWeights[vertex_index].mV[influence] = <joint_index>.<weight>
+    // mWeights.size() should be empty or match mVertices.size()
+    LLVector4a* mWeights;
 
 #if USE_SEPARATE_JOINT_INDICES_AND_WEIGHTS
     LLVector4a* mJustWeights;
@@ -978,8 +978,8 @@ public:
     // vertices per joint.
     LLJointRiggingInfoTab mJointRiggingInfoTab;
 
-	//whether or not face has been cache optimized
-	BOOL mOptimized;
+    //whether or not face has been cache optimized
+    BOOL mOptimized;
 
     // if this is a mesh asset, scale and translation that were applied
     // when encoding the source mesh into a unit cube
@@ -990,154 +990,154 @@ private:
     LLOctreeNode<LLVolumeTriangle, LLVolumeTriangle*>* mOctree;
     LLVolumeTriangle* mOctreeTriangles;
 
-	BOOL createUnCutCubeCap(LLVolume* volume, BOOL partial_build = FALSE);
-	BOOL createCap(LLVolume* volume, BOOL partial_build = FALSE);
-	BOOL createSide(LLVolume* volume, BOOL partial_build = FALSE);
+    BOOL createUnCutCubeCap(LLVolume* volume, BOOL partial_build = FALSE);
+    BOOL createCap(LLVolume* volume, BOOL partial_build = FALSE);
+    BOOL createSide(LLVolume* volume, BOOL partial_build = FALSE);
 };
 
 class LLVolume : public LLRefCount
 {
-	friend class LLVolumeLODGroup;
+    friend class LLVolumeLODGroup;
 
 protected:
-	virtual ~LLVolume(); // use unref
+    virtual ~LLVolume(); // use unref
 
 public:
-	typedef std::vector<LLVolumeFace> face_list_t;
-		
-	struct FaceParams
-	{
-		LLFaceID mFaceID;
-		S32 mBeginS;
-		S32 mCountS;
-		S32 mBeginT;
-		S32 mCountT;
-	};
-
-	LLVolume(const LLVolumeParams &params, const F32 detail, const BOOL generate_single_face = FALSE, const BOOL is_unique = FALSE);
-	
-	U8 getProfileType()	const								{ return mParams.getProfileParams().getCurveType(); }
-	U8 getPathType() const									{ return mParams.getPathParams().getCurveType(); }
-	S32	getNumFaces() const;
-	S32 getNumVolumeFaces() const							{ return mVolumeFaces.size(); }
-	F32 getDetail() const									{ return mDetail; }
-	F32 getSurfaceArea() const								{ return mSurfaceArea; }
-	const LLVolumeParams& getParams() const					{ return mParams; }
-	LLVolumeParams getCopyOfParams() const					{ return mParams; }
-	const LLProfile& getProfile() const						{ return *mProfilep; }
-	LLPath& getPath() const									{ return *mPathp; }
-	void resizePath(S32 length);
-	const LLAlignedArray<LLVector4a,64>&	getMesh() const				{ return mMesh; }
-	const LLVector4a& getMeshPt(const U32 i) const			{ return mMesh[i]; }
-	
-
-	void setDirty() { mPathp->setDirty(); mProfilep->setDirty(); }
-
-	void regen();
+    typedef std::vector<LLVolumeFace> face_list_t;
+
+    struct FaceParams
+    {
+        LLFaceID mFaceID;
+        S32 mBeginS;
+        S32 mCountS;
+        S32 mBeginT;
+        S32 mCountT;
+    };
+
+    LLVolume(const LLVolumeParams &params, const F32 detail, const BOOL generate_single_face = FALSE, const BOOL is_unique = FALSE);
+
+    U8 getProfileType() const                               { return mParams.getProfileParams().getCurveType(); }
+    U8 getPathType() const                                  { return mParams.getPathParams().getCurveType(); }
+    S32 getNumFaces() const;
+    S32 getNumVolumeFaces() const                           { return mVolumeFaces.size(); }
+    F32 getDetail() const                                   { return mDetail; }
+    F32 getSurfaceArea() const                              { return mSurfaceArea; }
+    const LLVolumeParams& getParams() const                 { return mParams; }
+    LLVolumeParams getCopyOfParams() const                  { return mParams; }
+    const LLProfile& getProfile() const                     { return *mProfilep; }
+    LLPath& getPath() const                                 { return *mPathp; }
+    void resizePath(S32 length);
+    const LLAlignedArray<LLVector4a,64>&    getMesh() const             { return mMesh; }
+    const LLVector4a& getMeshPt(const U32 i) const          { return mMesh[i]; }
+
+
+    void setDirty() { mPathp->setDirty(); mProfilep->setDirty(); }
+
+    void regen();
     void genTangents(S32 face);
 
-	BOOL isConvex() const;
-	BOOL isCap(S32 face);
-	BOOL isFlat(S32 face);
-	BOOL isUnique() const									{ return mUnique; }
-
-	S32 getSculptLevel() const                              { return mSculptLevel; }
-	void setSculptLevel(S32 level)							{ mSculptLevel = level; }
-
-	
-	static void getLoDTriangleCounts(const LLVolumeParams& params, S32* counts);
-
-	S32 getNumTriangles(S32* vcount = NULL) const;
-
-	void generateSilhouetteVertices(std::vector<LLVector3> &vertices, 
-									std::vector<LLVector3> &normals, 
-									const LLVector3& view_vec,
-									const LLMatrix4& mat,
-									const LLMatrix3& norm_mat,
-									S32 face_index);
-
-	//get the face index of the face that intersects with the given line segment at the point 
-	//closest to start.  Moves end to the point of intersection.  Returns -1 if no intersection.
-	//Line segment must be in volume space.
-	S32 lineSegmentIntersect(const LLVector4a& start, const LLVector4a& end,
-							 S32 face = -1,                          // which face to check, -1 = ALL_SIDES
-							 LLVector4a* intersection = NULL,         // return the intersection point
-							 LLVector2* tex_coord = NULL,            // return the texture coordinates of the intersection point
-							 LLVector4a* normal = NULL,               // return the surface normal at the intersection point
-							 LLVector4a* tangent = NULL             // return the surface tangent at the intersection point
-		);
-
-	LLFaceID generateFaceMask();
-
-	BOOL isFaceMaskValid(LLFaceID face_mask);
-	static S32 sNumMeshPoints;
-
-	friend std::ostream& operator<<(std::ostream &s, const LLVolume &volume);
-	friend std::ostream& operator<<(std::ostream &s, const LLVolume *volumep);		// HACK to bypass Windoze confusion over 
-																				// conversion if *(LLVolume*) to LLVolume&
-	const LLVolumeFace &getVolumeFace(const S32 f) const {return mVolumeFaces[f];} // DO NOT DELETE VOLUME WHILE USING THIS REFERENCE, OR HOLD A POINTER TO THIS VOLUMEFACE
-	
-	LLVolumeFace &getVolumeFace(const S32 f) {return mVolumeFaces[f];} // DO NOT DELETE VOLUME WHILE USING THIS REFERENCE, OR HOLD A POINTER TO THIS VOLUMEFACE
-
-	face_list_t& getVolumeFaces() { return mVolumeFaces; }
-
-	U32					mFaceMask;			// bit array of which faces exist in this volume
-	LLVector3			mLODScaleBias;		// vector for biasing LOD based on scale
-	
-	void sculpt(U16 sculpt_width, U16 sculpt_height, S8 sculpt_components, const U8* sculpt_data, S32 sculpt_level, bool visible_placeholder);
-	void copyVolumeFaces(const LLVolume* volume);
-	void copyFacesTo(std::vector<LLVolumeFace> &faces) const;
-	void copyFacesFrom(const std::vector<LLVolumeFace> &faces);
+    BOOL isConvex() const;
+    BOOL isCap(S32 face);
+    BOOL isFlat(S32 face);
+    BOOL isUnique() const                                   { return mUnique; }
+
+    S32 getSculptLevel() const                              { return mSculptLevel; }
+    void setSculptLevel(S32 level)                          { mSculptLevel = level; }
+
+
+    static void getLoDTriangleCounts(const LLVolumeParams& params, S32* counts);
+
+    S32 getNumTriangles(S32* vcount = NULL) const;
+
+    void generateSilhouetteVertices(std::vector<LLVector3> &vertices,
+                                    std::vector<LLVector3> &normals,
+                                    const LLVector3& view_vec,
+                                    const LLMatrix4& mat,
+                                    const LLMatrix3& norm_mat,
+                                    S32 face_index);
+
+    //get the face index of the face that intersects with the given line segment at the point
+    //closest to start.  Moves end to the point of intersection.  Returns -1 if no intersection.
+    //Line segment must be in volume space.
+    S32 lineSegmentIntersect(const LLVector4a& start, const LLVector4a& end,
+                             S32 face = -1,                          // which face to check, -1 = ALL_SIDES
+                             LLVector4a* intersection = NULL,         // return the intersection point
+                             LLVector2* tex_coord = NULL,            // return the texture coordinates of the intersection point
+                             LLVector4a* normal = NULL,               // return the surface normal at the intersection point
+                             LLVector4a* tangent = NULL             // return the surface tangent at the intersection point
+        );
+
+    LLFaceID generateFaceMask();
+
+    BOOL isFaceMaskValid(LLFaceID face_mask);
+    static S32 sNumMeshPoints;
+
+    friend std::ostream& operator<<(std::ostream &s, const LLVolume &volume);
+    friend std::ostream& operator<<(std::ostream &s, const LLVolume *volumep);      // HACK to bypass Windoze confusion over
+                                                                                // conversion if *(LLVolume*) to LLVolume&
+    const LLVolumeFace &getVolumeFace(const S32 f) const {return mVolumeFaces[f];} // DO NOT DELETE VOLUME WHILE USING THIS REFERENCE, OR HOLD A POINTER TO THIS VOLUMEFACE
+
+    LLVolumeFace &getVolumeFace(const S32 f) {return mVolumeFaces[f];} // DO NOT DELETE VOLUME WHILE USING THIS REFERENCE, OR HOLD A POINTER TO THIS VOLUMEFACE
+
+    face_list_t& getVolumeFaces() { return mVolumeFaces; }
+
+    U32                 mFaceMask;          // bit array of which faces exist in this volume
+    LLVector3           mLODScaleBias;      // vector for biasing LOD based on scale
+
+    void sculpt(U16 sculpt_width, U16 sculpt_height, S8 sculpt_components, const U8* sculpt_data, S32 sculpt_level, bool visible_placeholder);
+    void copyVolumeFaces(const LLVolume* volume);
+    void copyFacesTo(std::vector<LLVolumeFace> &faces) const;
+    void copyFacesFrom(const std::vector<LLVolumeFace> &faces);
 
     // use meshoptimizer to optimize index buffer for vertex shader cache
     //  gen_tangents - if true, generate MikkTSpace tangents if needed before optimizing index buffer
-	bool cacheOptimize(bool gen_tangents = false);
+    bool cacheOptimize(bool gen_tangents = false);
 
 private:
-	void sculptGenerateMapVertices(U16 sculpt_width, U16 sculpt_height, S8 sculpt_components, const U8* sculpt_data, U8 sculpt_type);
-	F32 sculptGetSurfaceArea();
-	void sculptGenerateEmptyPlaceholder();
-	void sculptGenerateSpherePlaceholder();
-	void sculptCalcMeshResolution(U16 width, U16 height, U8 type, S32& s, S32& t);
+    void sculptGenerateMapVertices(U16 sculpt_width, U16 sculpt_height, S8 sculpt_components, const U8* sculpt_data, U8 sculpt_type);
+    F32 sculptGetSurfaceArea();
+    void sculptGenerateEmptyPlaceholder();
+    void sculptGenerateSpherePlaceholder();
+    void sculptCalcMeshResolution(U16 width, U16 height, U8 type, S32& s, S32& t);
+
 
-	
 protected:
-	BOOL generate();
-	void createVolumeFaces();
+    BOOL generate();
+    void createVolumeFaces();
 public:
-	bool unpackVolumeFaces(std::istream& is, S32 size);
-	bool unpackVolumeFaces(U8* in_data, S32 size);
+    bool unpackVolumeFaces(std::istream& is, S32 size);
+    bool unpackVolumeFaces(U8* in_data, S32 size);
 private:
-	bool unpackVolumeFacesInternal(const LLSD& mdl);
+    bool unpackVolumeFacesInternal(const LLSD& mdl);
 
 public:
-	virtual void setMeshAssetLoaded(bool loaded);
-	virtual bool isMeshAssetLoaded();
+    virtual void setMeshAssetLoaded(bool loaded);
+    virtual bool isMeshAssetLoaded();
     virtual void setMeshAssetUnavaliable(bool unavaliable);
     virtual bool isMeshAssetUnavaliable();
 
  protected:
-	BOOL mUnique;
-	F32 mDetail;
-	S32 mSculptLevel;
-	F32 mSurfaceArea; //unscaled surface area
-	bool mIsMeshAssetLoaded;
+    BOOL mUnique;
+    F32 mDetail;
+    S32 mSculptLevel;
+    F32 mSurfaceArea; //unscaled surface area
+    bool mIsMeshAssetLoaded;
     bool mIsMeshAssetUnavaliable;
-	
-	const LLVolumeParams mParams;
-	LLPath *mPathp;
-	LLProfile *mProfilep;
-	LLAlignedArray<LLVector4a,64> mMesh;
-	
-	
-	BOOL mGenerateSingleFace;
-	face_list_t mVolumeFaces;
+
+    const LLVolumeParams mParams;
+    LLPath *mPathp;
+    LLProfile *mProfilep;
+    LLAlignedArray<LLVector4a,64> mMesh;
+
+
+    BOOL mGenerateSingleFace;
+    face_list_t mVolumeFaces;
 
 public:
-	LLVector4a* mHullPoints;
-	U16* mHullIndices;
-	S32 mNumHullPoints;
-	S32 mNumHullIndices;
+    LLVector4a* mHullPoints;
+    U16* mHullIndices;
+    S32 mNumHullPoints;
+    S32 mNumHullIndices;
 };
 
 std::ostream& operator<<(std::ostream &s, const LLVolumeParams &volume_params);
@@ -1147,13 +1147,13 @@ BOOL LLLineSegmentBoxIntersect(const LLVector3& start, const LLVector3& end, con
 BOOL LLLineSegmentBoxIntersect(const LLVector4a& start, const LLVector4a& end, const LLVector4a& center, const LLVector4a& size);
 
 //BOOL LLTriangleRayIntersect(const LLVector3& vert0, const LLVector3& vert1, const LLVector3& vert2, const LLVector3& orig, const LLVector3& dir,
-//							F32& intersection_a, F32& intersection_b, F32& intersection_t, BOOL two_sided);
+//                          F32& intersection_a, F32& intersection_b, F32& intersection_t, BOOL two_sided);
 
 BOOL LLTriangleRayIntersect(const LLVector4a& vert0, const LLVector4a& vert1, const LLVector4a& vert2, const LLVector4a& orig, const LLVector4a& dir,
-							F32& intersection_a, F32& intersection_b, F32& intersection_t);
+                            F32& intersection_a, F32& intersection_b, F32& intersection_t);
 BOOL LLTriangleRayIntersectTwoSided(const LLVector4a& vert0, const LLVector4a& vert1, const LLVector4a& vert2, const LLVector4a& orig, const LLVector4a& dir,
-							F32& intersection_a, F32& intersection_b, F32& intersection_t);
-	
-	
+                            F32& intersection_a, F32& intersection_b, F32& intersection_t);
+
+
 
 #endif